Transcript
P6215
P6215
INDOOR/OUTDOOR TWO WAY COAX SPEAKER SYSTEM
APPLICATIONS • Live sound reinforcement • Portable and installed audio-visual systems • Live theatre and houses of worship • Auditoriums, retail, ballrooms and night clubs
FEATURES • Weatherproof cabinet IP 55 • Aluminium grill and stainless steel bracket • One 15” high-output LF transducer with 3” voice coil • One RCF Precision Neo 1.3” C. Driver with 2.5” voice coil • 60° x 60° conical horn for P6215 • 10° X 20° enclosure sides for array configurations • Active Mosfet Compression Driver Protection • 12 brass suspension points (M10) • line transformer
The P6215 is a weatherproof full range, wide-dispersion, coaxial two way loudspeaker system offering substantial power and efficiency for a variety of professional indoor or outdoor applications. The high-frequency section is a constant directivity CMD horn loaded to a 1.3” RCF Precision Neodymium compression driver with a 2.5” diaphragm assembly for smooth, wide dispersion. The low-frequency transducer is a 15” woofer with a 3” voice coil. The P6215 is a dedicated high power version for very high output and longer throw applications. The cabinet is a single piece rotational moulded in medium density polyethylene, fully UV protected. The cabinet is equipped with 12 x M 10 brass inserts, a stainless steel U-Bracket and pair of spacers for 90° mounting. The front logo is in aluminium and rotatable. The grille is in custom perforated aluminium with open-cell fibres and water repellent woven fabric backing. The P6215 meets the requirements of IP 55 code (International Protection Rating)
SYSTEM Freq. Range (-10 db): Freq. Range (-3 db): Horiz. Coverage angle (-6 db): Vertical coverage angle (-6 db): Directivity factor; q: System sensitivity: Rated maximum spl: System nominal impedance: System input power rating rms: System input power rating peak: Constant voltage line: Selectable power: Hf protection: Crossover:
75 Hz - 20 kHz 120 Hz - 20 kHz 60° 60° 12.8 100 dB , 1W @ 1m 134 dB, @ 1m 8 Ohm 600 W 2400 W Dynamic 1.1 kHz
TRANSDUCERS Nominal impedance: Input power rating: Sensitivity:
15” (380 mm) woofer with 3” (75 mm) coil 8 Ohm 450 W AES ; 900 W Peak 101 dB, 1W @ 1m
High frequency: Nominal impedance: Input power rating: Sensitivity:
1.3”(33mm) throat, 2.5” (64mm) coil 8 Ohm 90 W AES ; 180 W Peak 108 dB, 1W @ 1m
Low frequency:
PHYSICAL Enclosure: Rigging inserts: Color: Grille: Input connectors: Dimensions (HxWxD): Weight:
Trapezoidal, 10° Horizontal side angles, 20° Vertical side angle, 8 mm Polyethylene rotomoulded 12 x M8 + U-Bracket and Pair of spacers Gray Custom perforated aluminium grille with open-cell fiber and water repellent woven fabric backing 4 x 1.5mm square, 5m Neoprene cable 18.22” x 18.22” x 17.04” 463 x 463 x 433 mm 42.32 lb - 19.2 Kg
P6215
Beamwidth vs. Frequency
Response 1W/1m 110
360 Horizontal Beamwidth (1/3 Octave) Vertical Beamwidth (1/3 Octave)
330 300 100
Coverage Angle (Deg.)
270
dB SPL
90
80
240 210 180 150 120 90
70 60 30 0 100
60 20
100
1000 Frequency (Hz)
10000
Directivity Index and Q
1000 Frequency (Hz)
10000
Normalized Horizontal off-axis Response
100
20
5
18 0 16 -5
Total Q
10
10 8 6
Directivity index Di, dB
12
Attenuation in dB
14
-10
-15
-20
4 -25 2 1 100
0 1000 Frequency (Hz)
Horizontal ±10 degrees Horizontal ±20 degrees Horizontal ±30 degrees Horizontal ±40 degrees Horizontal ±50 degrees Horizontal ±60 degrees
-30 100
10000
1000 Frequency (Hz)
10000
Normalized Vertical off-axis Response. Below the box 5
Normalized Vertical off-axis Response. Above the box 5
0 0 -5 Attenuation in dB
Attenuation in dB
-5
-10
-15
-10
-15
-20 -20
-25
-30
Vertical +10 degrees Vertical +20 degrees Vertical +30 degrees Vertical +40 degrees Vertical +50 degrees Vertical +60 degrees
-25
-30 100
Vertical -10 degrees Vertical -20 degrees Vertical -30 degrees Vertical -40 degrees Vertical -50 degrees Vertical -60 degrees
1000
10000
P6215
Horizontal 1/3 Polar Plot Horizontal 1/3 Octave Polars
Horizontal 1/3 Octave Polars
315 250 200
0°
330°
30°
270° -6 -12 -18 -24 -30 -36 -42 -48
-48 -42 -36 -30 -24 -18 -12 -6
240°
-6 -12 -18 -24 -30 -36 -42 -48
Horizontal 1/3 Octave Polars
2500 2000 1600
0°
330°
30°
300°
270° -6 -12 -18 -24 -30 -36 -42 -48
-48 -42 -36 -30 -24 -18 -12 -6
240°
Horizontal 1/3 Octave Polars
0
-6 -12 -18 -24 -30 -36 -42 -48
-48 -42 -36 -30 -24 -18 -12 -6
150°
60°
270°
90° 0
-6 -12 -18 -24 -30 -36 -42 -48
0
120°
150°
210°
-48 -42 -36 -30 -24 -18 -12 -6
240°
120°
180°
30°
300°
0
240°
10000 8000 6300
0°
330°
60°
90°
0
120°
210°
5000 4000 3150
30°
270°
90° 0
180°
300°
60°
0
150°
210°
0°
330°
-48 -42 -36 -30 -24 -18 -12 -6
120°
180°
180°
Horizontal 1/3 Octave Polars
-6 -12 -18 -24 -30 -36 -42 -48
240°
150°
210°
60°
90° 0
120°
150°
30°
270°
0
240°
120°
210°
-48 -42 -36 -30 -24 -18 -12 -6
1250 1000 800
0°
330°
300°
90° 0
0
Horizontal 1/3 Octave Polars
60°
270°
90° 0
30°
300°
60°
300°
630 500 400
0°
330°
150°
210°
180°
180°
Vertical 1/3 Polar Plot Vertical 1/3 Octave Polars
Vertical 1/3 Octave Polars
315 250 200
90°
120°
60°
150°
-6 -12 -18 -24 -30 -36 -42 -48
-48 -42 -36 -30 -24 -18 -12 -6
210°
0
-6 -12 -18 -24 -30 -36 -42 -48
210°
330°
Vertical 1/3 Octave Polars
-6 -12 -18 -24 -30 -36 -42 -48
2500 2000 1600
90° 60°
150°
Vertical 1/3 Octave Polars
180°
0° -6 -12 -18 -24 -30 -36 -42 -48
-48 -42 -36 -30 -24 -18 -12 -6
210°
0
330°
300°
240° 270°
5000 4000 3150
60°
Vertical 1/3 Octave Polars
-48 -42 -36 -30 -24 -18 -12 -6
210°
0
330°
300°
240° 270°
60°
150°
0° -6 -12 -18 -24 -30 -36 -42 -48
10000 8000 6300
90°
120°
30°
180° 0
300° 270°
150°
30°
0
330°
240°
90°
120°
-48 -42 -36 -30 -24 -18 -12 -6
210°
270°
120°
0
30°
0° 0
300°
240°
270°
60°
180°
0
330°
300°
240°
-48 -42 -36 -30 -24 -18 -12 -6
1250 1000 800
90°
120°
150°
0°
0
Vertical 1/3 Octave Polars
30°
180°
0° 0
60°
150°
30°
180°
630 500 400
90°
120°
30°
180°
0° 0
-6 -12 -18 -24 -30 -36 -42 -48
-48 -42 -36 -30 -24 -18 -12 -6
210°
0
330°
300°
240° 270°
P6215 CSI PRODUCT SPECIFICATIONS FOR DESIGNERS, SPECIFIERS, AND CONSULTANTS (ALSO KNOWN AS “A&E SPECIFICATIONS”) The following are “Part 2 Products” CSI-type specifications. It is assumed that “Part 1 General – Administrative and Procedures” and “Part 3 Execution – Installation and Maintenance” are part of an overall audio system or project specification. PART 2 PRODUCTS 2.01 Approved Manufacturer/Product A. RCF, Via Raffaello 13, 42124, Reggio Emilia, Italy. B. Model number: P6215
2.02 Design Configuration: LF Sub-section: MR Sub-section: HF Sub-section:
Two way active speaker 15” neodymium woofer, 75 mm voice coil 1,3” neodymium, 64 mm voice coil
2.03 Acoustical Proprieties Nominal dispersion angle: Axial frequency range (-10 dB): Axial frequency range (-3 dB):
60° x 60° 75Hz-20kHz 120Hz-20kHz
2.04 Physical Properties 463mm (18.22”)
Cabinet: Rigging inserts: Color: Grille:
463mm (18.22”)
Input Connectors: Dimensions (H x W x D): Weight:
433mm (17.04”)
Polyethylene rotomoulded 12 x M8 + U-Bracket and pair of spacers Gray Custom perforated aluminium grille with open-cell fiber and water repellent woven fabric backing 2 x 2.5mm square, 5m Neoprene cable 463 x 463 x 433 mm (18.22” x 18.22” x 17.04”) 19.4 kg (42.76 lbs.)
2.05 Accessories AC P15A-BR
472mm (18.58”)
472mm (18.58”)
www.rcfaudio.com
Cluster brackets for P3115/P6215 (including 4 brackets to cluster 2 speakers)
