Transcript
PCS
Structured Cabling Solutions
PATCH CORD SOLUTIONS
HiPerlink 6 Colored Patch Cords- NEW HiPerlink 1000 Category 5e Colored Patch Cords- NEW Snap-in Icons ScTP Category 5 Patch Cord Category 5 Colored Patch Cords, Bootless- NEW Colored Strain Relief for Modular Patch Cords Category 5 IC110 Patch Cords CATV Patch Cords
35,36 35,36 36 37 37 37 38 39
FIBER OPTIC JUMPERS MT-RJ Multimode Fiber Optic Jumpers LC Multimode Fiber Optic Jumpers- Coming 2002 Singlemode Fiber Optic Jumpers Multimode Fiber Optic Jumpers
38 38 39 39
Providing superior performance and reliability, ICC's Patch Cord Solutions (PCS) offers a full line of patch cords and fiber optic jumpers. All ICC HiPerlink 6™, HiPerlink 1000™ (CAT 5e), and CAT 5 patch cords are available in Standard Blue as well as White, Gray, Red, Yellow, Black, and Green, adding value to the installation by allowing you to easily identify the patch cord usage, and more efficiently administer your telecom room. ICC's patch cords are tested using procedures released under TIA/EIA568B.1 and consistently show results that surpass current industry standards when used in a channel with other ICC components. ICC's HiPerlink 6™ and HiPerlink 1000™ patch cords have new lowprofile boots to allow the patch cords to fit side by side (or back to back) without interfering with each other in high-density installations. Performing above and beyond current industry standards, ICC's Category 5 patch cords are CAT 5 compliant when tested under ANSI/TIA/EIA-568-A and are both 568-A and 568-B wiring-compatible. They are offered without boots (bootless) in the same variety of colors described above and have been designed with added strain relief. ICC's Patch Cord Solutions also include a wide variety of multimode and singlemode fiber optic jumpers. Each connector on an ICC fiber optic jumper assembly is tested to exceed industry standards.
CUSTOMER CARE / TECHNICAL SUPPORT CSR @ ICC.COM / 888-275-4422 (ASK-4-ICC)
PATCH CORD SOLUTIONS
.. .. .. .. .. ..
PATCH CORDS
34
WWW.ICC.COM
PCS
Structured Cabling Solutions
PRODUCTS TECHNICAL HIGHLIGHTS NEW
ICC's HiPerlink series patch cords, when used with other HiPerlink series components, achieve channel performance exceeding the ANSI/TIA/EIA standards. All ICC HiPerlink 6™, HiPerlink 1000™ (CAT 5e), and CAT 5 patch cords are available in Standard Blue as well as White, Gray, Red, Yellow, Black, and Green, adding value to the installation by allowing you to easily identify the patch cord usage, and more efficiently administer your telecom room. HiPerlink series patch cords have new low-profile boots to allow the patch cords to fit side by side (or back to back) without interfering with each other in high-density installations. CAT 5 patch cords are offered without boots (bootless), and are designed with built-in strain relief.
Use of colored patch cords allows quick identification of application.
A
B
C
Colored snap-in icons further enhance your ability to Identify cords.
D H
6.4dB HEADROOM @ 250MHz E
90 80 70 60 F
50 40
Low profile boots make it easier to install highdensity applications.
Bootless CAT 5 patch cords have built in strain relief.
35
HIPERLINK 6 AND HIPERLINK 1000 PATCH CORDS
NEXT (dB)
PATCH CORD SOLUTIONS
FEATURES
10
100
200
Worst pair NEXT for 8 major domestic cable partners with a margin averaging 6.4dB@250MHz in the maximum channel set up using 3 mated connections, three 10 feet patch cords and 295 feet of horizontal cable.
G
A
Low profile boot (HiPerlink Series)
B
Bootless (CAT 5)
C
Removable boot (HiPerlink Series)
D
Snag-proof design (HiPerlink Series)
E
Snap-in icons (HiPerlink Series)
F
Enhanced grip (HiPerlink Series)
G
50 micron, gold-plated contacts
H
Worst Case Next Test (HiPerlink 6 Channel)
Product Referencing Chart
CUSTOMER CARE / TECHNICAL SUPPORT CSR @ ICC.COM / 888-275-4422 (ASK-4-ICC)
PCS
PRODUCTS
WWW.ICC.COM
Structured Cabling Solutions
HiPerlink 6 Patch Cords Using testing procedures released under TIA/EIA-568B.1, ICC's HiPerlink 6TM patch cords surpassed current CAT 6 channel performance requirements when used in a channel with ICC's HiPerlink 6TM patch panels and modular connectors. Available in Standard Blue as well as White, Gray, Red, Yellow, Black, and Green, adding value to the installation by allowing you to easily identify the patch cord usage. New low-profile boots allow the patch cords to fit adjacent to each other in high-density applications.
NEW NEW NEW NEW
DESCRIPTION
ICPCS603xx* ICPCS605xx* ICPCS607xx* ICPCS610xx* ICPCS614xx* ICPCS620BL ICPCS625BL
3 ft., 4 UTP, HiPerlink 6, 24AWG Stranded 5 ft., 4 UTP, HiPerlink 6, 24AWG Stranded 7 ft., 4 UTP, HiPerlink 6, 24AWG Stranded 10 ft., 4 UTP, HiPerlink 6, 24AWG Stranded 14 ft., 4 UTP, HiPerlink 6, 24AWG Stranded 20 ft., 4 UTP, HiPerlink 6, 24AWG Stranded 25 ft., 4 UTP, HiPerlink 6, 24AWG Stranded xx* = BL (Standard), GN, RD, YL, WH, GY, BK
HiPerlink 1000 Category 5e Patch Cords Using testing procedures released under TIA/EIA-568B.1, ICC's HiPerlink 1000™ patch cords showed surpassing results, gaining a full 10 dB of headroom when used in a channel with HiPerlink 1000™ modular connectors and patch panels. Available in Standard Blue as well as White, Gray, Red, Yellow, Black, and Green, adding value to the installation by allowing you to easily identify the patch cord usage. New low-profile boots allow the patch cords to fit adjacent to each other in high-density applications.
NEW NEW NEW NEW NEW NEW
ITEM NUMBER
DESCRIPTION
ICPCS901BL ICPCS903xx* ICPCS905xx* ICPCS907xx* ICPCS910xx* ICPCS914xx* ICPCS920BL ICPCS925BL
1 ft., 4 UTP, HiPerlink 1000, 24AWG Stranded 3 ft., 4 UTP, HiPerlink 1000, 24AWG Stranded 5 ft., 4 UTP, HiPerlink 1000, 24AWG Stranded 7 ft., 4 UTP, HiPerlink 1000, 24AWG Stranded 10 ft., 4 UTP, HiPerlink 1000,24AWG Stranded 14 ft., 4 UTP, HiPerlink 1000, 24AWG Stranded 20 ft., 4 UTP, HiPerlink 1000, 24AWG Stranded 25 ft., 4 UTP, HiPerlink 1000, 24AWG Stranded xx* = BL (Standard), GN, RD, YL, WH, GY, BK
Snap-in Icons ICC's snap-in icon identification system is designed to be used with ICC's Category 5e and HiPerlink 6TM patch cords. The color-coded icons can be snapped into ICC's standard boot, making both identification and administration easier, and may be easily removed and replaced. ITEM NUMBER
DESCRIPTION
ICPCSICDxx* ICPCSICVxx*
Snap-in DATA icons, 24 icons/bag Snap-in VOICE icons, 24 icons/bag
PATCH CORD SOLUTIONS
NEW
ITEM NUMBER
xx*= IV, WH, GY, BK, BL, GN, OR, PR, RD, YL
CUSTOMER CARE / TECHNICAL SUPPORT CSR @ ICC.COM / 888-275-4422 (ASK-4-ICC)
36
WWW.ICC.COM
PCS
Structured Cabling Solutions
PRODUCTS ScTP Category 5 Patch Cord
PATCH CORD SOLUTIONS
ICC's Category 5, 100 Ohm, ScTP patch cord is designed to maintain the shielding effectiveness on ICC's ScTP Category 5 connector, and complies with the requirements set by TIA. The shielding is used as an extra defense against Electro-Magnetic Interference (EMI), commonly present around power cables, fluorescent lights, and heavy machinery.
37
ITEM NUMBER
DESCRIPTION
ICPCSS03GY ICPCSS07GY ICPCSS10GY
3 ft., ScTP CAT 5 Patch Cord 7 ft., ScTP CAT 5 Patch Cord 10 ft., ScTP CAT 5 Patch Cord
Category 5 Patch Cords Performing above and beyond current industry standards, ICC's Category 5 patch cords are Category 5 compliant when tested under ANSI/TIA/EIA-568-A and are both 568-A and 568-B wiring-compatible. They are available in Standard Blue as well as White, Gray, Red, Yellow, Black, and Green, adding value to the installation by allowing you to easily identify the patch cord usage, and more efficiently administer your telecom room. They are offered without boots.
NEW NEW NEW NEW NEW
ITEM NUMBER
DESCRIPTION
ICPCS503xx* ICPCS505xx* ICPCS507xx* ICPCS510xx* ICPCS514xx* ICPCS520BL ICPCS525BL
3 ft., 4 UTP, Category 5, 24AWG Stranded 5 ft., 4 UTP, Category 5, 24AWG Stranded 7 ft., 4 UTP, Category 5, 24AWG Stranded 10 ft., 4 UTP, Category 5, 24AWG Stranded 14 ft., 4 UTP, Category 5, 24AWG Stranded 20 ft., 4 UTP, Category 5, 24AWG Stranded 25 ft., 4 UTP, Category 5, 24AWG Stranded xx* = BL (Standard), GN, RD, YL, WH, GY, BK
Colored Strain Relief for Modular Patch Cords Colored strain relief for modular patch cords prevents strain on the termination, and prevents excessive bending at each end of the cord. It is designed for use with 8-position modular patch cords. ITEM NUMBER
DESCRIPTION
ICPCSSR8xx*
Colored Strain Relief, 10 pcs./bag xx*= IV, WH, GY, BK, BL, GN, OR, PR, RD, YL
CUSTOMER CARE / TECHNICAL SUPPORT CSR @ ICC.COM / 888-275-4422 (ASK-4-ICC)
PCS
PRODUCTS
WWW.ICC.COM
Structured Cabling Solutions
Category 5 IC110 Patch Cords Category 5-compliant IC110 patch cords can be used in combination with the IC110 cross-connect system. The factory terminated cords are available in IC110 to 8P8C modular plugs in either T-568-A or T-568-B wiring, or IC110 to IC110 configurations. IC110 TO 8P8C
DESCRIPTION
ICPCSA03BL ICPCSA07BL ICPCSA10BL ICPCSB03BL ICPCSB07BL ICPCSB10BL ICPCSR03BL ICPCSR07BL ICPCSR10BL
3 ft., IC110 to 8P8C Mod. Plug T-568-A 7 ft., IC110 to 8P8C Mod. Plug T-568-A 10 ft., IC110 to 8P8C Mod. Plug T-568-A 3 ft., IC110 to 8P8C Mod. Plug T-568-B 7 ft., IC110 to 8P8C Mod. Plug T-568-B 10 ft. IC110 to 8P8C Mod. Plug T-568-B 3 ft., IC110 to IC110 Patch Cord 7 ft., IC110 to IC110 Patch Cord 10 ft., IC110 to IC110 Patch Cord
MT-RJ Multimode Fiber Optic Jumpers MT-RJ - MT-RJ
Each ICC MT-RJ multimode fiber optic jumper is individually tested to ensure minimum attenuation and maximum performance. MT-RJ fiber optic jumpers utilize OFNR riser-rated, 62.5/125 micron fiber cable. ITEM NUMBER
DESCRIPTION
ICFOJ4T6xx
Fiber Optic Jumper, MTRJ-MTRJ, MM, Duplex, 62.5/125µm Fiber Optic Jumper, MTRJ-SC, MM, Duplex, 62.5/125µm Fiber Optic Jumper, MTRJ-ST, MM, Duplex, 62.5/125µm
ICFOJ5T6xx ICFOJ6T6xx MT-RJ - SC
Note: xx=01, 02, 03, 05 meters in length
MT-RJ - ST
LC Multimode Fiber Optic Jumpers LC and LC-Hybrid jumpers are available in duplex multimode versions. 2ND QUARTER Each connector on an LC jumper is individually tested to ensure minimum attenuation and maximum performance. All LC jumpers utilize OFNR riser-rated 62.5/125µm fiber cable. ITEM NUMBER
DESCRIPTION
ICFOJ1M3xx ICFOJ2M3xx
Fiber Optic Jumper, LC-LC, MM, Duplex, 62.5/125µm Fiber Optic Jumper, LC-SC, MM, Duplex, 62.5/125µm
PATCH CORD SOLUTIONS
IC110 TO 1C110
ITEM NUMBER
Note: xx=01, 03 meters in length
CUSTOMER CARE / TECHNICAL SUPPORT CSR @ ICC.COM / 888-275-4422 (ASK-4-ICC)
38
WWW.ICC.COM
PCS
Structured Cabling Solutions
PRODUCTS Singlemode Fiber Optic Jumpers
PATCH CORD SOLUTIONS
ICC singlemode (SM) simplex and duplex fiber optic jumpers utilize OFNR riser-rated, 1 or 2 fiber singlemode cable which meets UL 1666 requirements. These singlemode jumper assemblies incorporate connectors that have ceramic ferrules for precision and durability. Each connector and related assembly is visually inspected for flaws, and tested to verify that it meets industry standard requirements.
39
ITEM NUMBER
DESCRIPTION
ICFOJ7C4xx ICFOJ7C5xx ICFOJ8C4xx ICFOJ8C5xx ICFOJ9C4xx ICFOJ9C5xx
Fiber Fiber Fiber Fiber Fiber Fiber
Optic Optic Optic Optic Optic Optic
Jumper, Jumper, Jumper, Jumper, Jumper, Jumper,
ST-ST, SM, Simplex ST-ST, SM, Duplex SC-SC, SM, Simplex SC-SC, SM, Duplex SC-ST, SM, Simplex SC-ST, SM, Duplex
Note: xx=01, 02, 03, 05 meters in length
Multimode Fiber Optic Jumpers ICC multimode (MM) simplex and duplex fiber optic jumpers utilize OFNR riser-rated, 1 or 2-fiber 62.5/125 micron or 50/125 micron multimode cable that meets UL 1666 requirements. ICC's multimode jumper assemblies incorporate connectors that have ceramic ferrules for precision and durability. Each connector on an ICC fiber optic jumper assembly is visually inspected for flaws, and tested to meet industry standard requirements. ITEM NUMBER
DESCRIPTION
ICFOJ7C2xx ICFOJ7C3xx ICFOJ7C6xx ICFOJ7C7xx ICFOJ8C2xx ICFOJ8C3xx ICFOJ8C6xx ICFOJ8C7xx ICFOJ9C2xx ICFOJ9C3xx ICFOJ9C6xx ICFOJ9C7xx
Fiber Optic Jumper, ST-ST, MM, Simplex, 62.5/125µm Fiber Optic Jumper, ST-ST, MM, Duplex, 62.5/125µm Fiber Optic Jumper, ST-ST, MM, Simplex, 50/125µm Fiber Optic Jumper, ST-ST, MM, Duplex, 50/125µm Fiber Optic Jumper, SC-SC, MM, Simplex, 62.5/125µm Fiber Optic Jumper, SC-SC, MM, Duplex, 62.5/125µm Fiber Optic Jumper, SC-SC, MM, Simplex, 50/125µm Fiber Optic Jumper, SC-SC, MM, Duplex, 50/125µm Fiber Optic Jumper, SC-ST, MM, Simplex, 62.5/125µm Fiber Optic Jumper, SC-ST, MM, Duplex, 62.5/125µm Fiber Optic Jumper, SC-ST, MM, Simplex, 50/125µm Fiber Optic Jumper, SC-ST, MM, Duplex, 50/125µm Note: xx=01, 02, 03, 05 meters in length
CATV Patch Cords ICC offers a line of CATV patch cords. The patch cords are made of 75 ohm RG-6 coaxial cable and gold F-Type connectors to provide maximum signal transfer. ITEM NUMBER
DESCRIPTION
ICPCSF03BK ICPCSF06BK ICPCSF10BK ICPCSF25BK
3 ft., CATV Patch Cord, Male-to-Male, Gold, RG-6 6 ft., CATV Patch Cord, Male-to-Male, Gold, RG-6 10 ft., CATV Patch Cord, Male-to-Male, Gold, RG-6 25 ft., CATV Patch Cord, Male-to-Male, Gold, RG-6
CUSTOMER CARE / TECHNICAL SUPPORT CSR @ ICC.COM / 888-275-4422 (ASK-4-ICC)
