P Rofessional A Ccessories

Transcript

Catalog #817 Professional Accessories How its! Work Magnepull Spider ign, New Denst Case! ie n Conve • Simple! Reduces Wire Installation Labor to Minutes • Works well in wood or metal studs and conduits • Light weight — less than 1.5 lbs • No need for large hole — the unit will retrieve through a hole as small as 11/4” • Powerful magnet will couple through wall board as thick as 3/4” Part #: MAGNEPULL SPIDER DROP LOCATE CONNECT RETRIEVE Commercial Instructions INSERT CONNECT FEED RETRIEVE CATMASTER™ Termination System for RJ45 SECTION 14 Professional Accessories Magnepull Spider cable retrieval system reduces cable installations time as much as 70% as compared to a standard fish tape. This new tool magnetically couples the cable-pulling device through drywall and allows the technicians to have complete control. The system was developed to work with metal studs and in insulated walls. Benefits of The Magnepull Spider*: Residential Instructions CATMaster™ Crimp Tool This high quality crimp tool is designed to quickly crimp and cut the wires of the EZ-RJ45® Connector...in one easy simple operation! Will also work on all other RJ-11, RJ-12 and RJ-45 connectors. Part #: 100 044LW UTP Cable Jacket Stripper Part #: 15010 · Precision ground crimp dies. · Straight action cut and crimp performs the best crimp. · Full cycle ratcheting mechanism provides consistent terminations every time. · Crimps and cuts the wire in one cycle. · Built in wire cutter and stripper. · High strength, long life steel frame. · Rust resistant black oxide coating. · Superior quality at an economical price. EZ-RJ45® Connector This economical tool has been specifically designed to strip the cable jacket from UTP cables. Will not nick the inner conductors. Packaged in bags of 100 The new patented EZ-RJ45® connector simplifies twisted pair terminations by allowing the wires to be inserted through the connector and out the front. This allows the technician to easily verify the proper wiring order. Electrical performance of the termination is optimized by pulling the connector down over the cable jacket and seating it tightly in the rear of the connector. Reducing the distance between the wire twists and contacts improves performance! CATMaster™ Kits are Available CATMasterTM Kits are available Description • 1 CATMaster RJ11/RJ45 Crimp Tool • 1 CATMaster Stripper • 1 Cable Cutter • 50 CATMater RJ-45 Connectors w w w. l i b e r t yc a b l e. co m Specifications Subject to Change Part # Colored Boots Part #: 100030-* Metal Connector Part #: 100020 Ordering is fast & easy. 90131LW 800-530-8998 International – Call +1-719-388-7542 Call today! 227