Transcript
FCC WARNING Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ~ Reorient or relocate the receiving antenna. ~ Increase the separation between the equipment and receiver. ~ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. ~ Consult the dealer or an experienced radio/TV technician for help.
INTRODUCTION
BATTERY
This digital pedometer displays steps taken, calories burned, distance traveled, and 15 days memory storage, among many other useful features. Also, the most important, could download your exercise data to the PC and some smart Phones. Please read this manual carefully before using this pedometer. We suggest you keep this manual for future reference. To keep your health and reduce chronic disease risk, we recommend you to take 10,000 steps a day. For an effective weight loss, the total steps should be between 12,000 and 15,000. If you want to achieve a higher fitness level, you are suggested to take at least 30,000 steps per day.
Install the supplied button cell in first time use or replace it when consumed as below: 1. Take out the silicone clip from the unit as figure below:
2. Open the battery door by a coin or screwdriver (not supplied) as the figure below:
3. Install the button cell to unit as the figure below with polarity “+” face up.
4. Replace the battery door and silicone clip. IMPORTANTS: ~ Only 15 days record can be keep in the unit. ~ If the battery was consumed, your record will be erased. Always uploaded and keep the records in your Computer or cell phone.
CARE; MAINTENANCE & CLEARING
BATTERY PRECAUTIONS Follow these Battery Precaution when using a battery in this device: 1. Use only the size and type of battery specified. 2. Be sure to follow the correct polarity when installing the battery as indicated in the battery compartment. A reversed battery may cause damage to the device. 3. Do not mix different types of batteries together (e.g. Alkaline and Carbon-zinc) or old batteries with fresh ones. 4. If the batteries in the device are consumed or the device is not to be used for a long period of time, remove the batteries to prevent damage or injury from possible battery leakage. 5. Do not try to recharge the battery not intended to be recharged; it can overheat and rupture. (Follow battery manufacturer’s instructions.) 6. Do not dispose of battery in fire. Battery may explodes or leak. 7. Clean the battery contacts and also those of the device prior to battery installation. 8. This product contains a coin/button cell battery. If the coin/button cell battery is swallowed, it can cause severe internal burn in just 2 hours and can lead to death.Keep new and used batteries away from children. If the battery compartment does not close securely, stop using the product and keep it away from children.If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention.
~ Do not disassemble the pedometer. ~ Do not subject the device to extreme shocks. ~ Do not expose the device to strong chemicals such as gasoline, clean solvents, acetone, alcohol, or insect repellents, as they may damage the device's seal, case and finish. ~ Store the product in a dry place when you are not using it. ~ To avoid accidental strangulation, keep the pedometer out of children reach. ~ The operation environment of the pedometer must be free from stocks, magnetic fields, electrical noise and strong vibration. ~ Do not immerse the product in water as this will result in damage to it. ~ It could be cleaned with a lightly moistened cloth. Apply mild soap to the area if there are stubborn stains or marks.
BASIC OPERATION 1. Indicators on the display
3. Exercise intensity meter: Low electrical indicator When the power of the battery is less than 20%, it will appear on the display. Replace the battery as soon as possible.
12 Hour System
Goal meter Each bar (Total 10 bars) equal 10% completed target steps.
The meter on the right of display is the Exercise intensity meter, it will refresh every 5 seconds to shows the running speed as below:
BAR
Goal Indicator Appear if target was set. Blinking if target was completed. 2. Tap the panel repeatedly to read time or exercise data
Clock
Step
Calories Burning
Frequence(Step/min)
1 2 3 4 5 6 7 8 9
Bluetooth connected Indicator
Step＜90 90≤Step＜110 110≤Step＜130 130≤Step＜150 150≤Step＜160 160≤Step＜170 170≤Step＜175 175≤Step＜180 180≤Step
Distance
Connect and upload the record to Computer 4. Sleep Mode:
Software installations:
To save battery power, Pedometer will enter into sleep mode automatically as follows: ~ BT Paired successful in first time, the Pedometer will enter to sleep mode if idle more than 30 minutes. ~ If start use, the Pedometer will enter to sleep mode if idle more than 12 minutes. ~ If no any data stored in the pedometer, it will enter to sleep mode if idle more than 20 seconds. ~ After synchronizing data, the Pedometer will enter to sleep mode immediately. ~ If the Pedometer entered to sleep mode, the display will be blank. Shock or tap the display to wake up.
1. Insert the supplied USB dongle to the USB Port on your computer, wait until the driver installed automatically. 2. Insert the supplied disc to the CD/DVD Driver on your computer: ~ Wait a few seconds, a small window will appear on the computer’s screen. ~ Left click the “Open the folder to view the file”; a new small window will pop up. ~ Double Left click “CC 427”; the Setup Wizard will appear. ~ Install it to your computer as the on screen instructions. Note: Computer system compatible: Windows XP, Vista, Win 7 and Win 8
5. Data storage Pedometer will automatically record intraday data each 30 minutes, and will store the past 15 day’s record.
3. After installed the supplied software to the computer, a short cut icon “CC427” will appear on the screen as follow:
Note: Pedometer will automatic reset your progress of completed target and other daily data at 12:00 P.M. Your exercise data will not be deleted when automatic reset. Only when it is uploaded on APP, user can delete it. The time of automatic reset is same with your mobile devices.
~ Double click the desired Pedometer address (if more than one Pedometers was searched, more than one address will be shows) as the figure on right, a small window “Connect” will pop up.
~ Double click the icon to open it, the follows picture will appear:
~ Click the “Refresh” button on it, the follows picture and “Searching Device …. ” will appear on the screen. Wait until the computer searched the available Pedometers:
~ Click the “Connect” to start connecting. Wait a few seconds until it is connected. The follows picture will appear:
Connect and upload the record to Smart Phone ~ Enter your personal information, synchronizing; read, edit the data as the screen instruction as : Setting: Enter to setting menu Device: To read the list of searched Pedometers. : To read the exercise record : To read the exercise record in chart : Enter to setting menu Sync: Synchronizing the data between the Pedometer and Computer
App installations: 1. Download the application (apps) “Bluetooth Activity Tracker” from iPhone Store or “Craig Activity Tracker” from Google Play as the table below then install it in your smart phone. Compatible phones:
Notes: ~ When synchronize to computer, make sure the Pedometer is not in sleep mode. If it is in sleep mode. Shock or tap to wake it up. ~ A Pedometer can synchronize to one computer only. ~ When synchronize to computer, the clock on the Pedometer will be update automatically.
2. After installed , the short cut icon “Bluetooth Activity Tracker” will appear on your phone's screen as follow:
4. Click the “Refresh” button on it, Wait until the phone searched the available Pedometers:
3. Turn on the BT function of the phone then click/tap the icon to open it, the follows picture will appear:
5. Double click the desired Pedometer address to start connecting (if more than one Pedometer was searched, more than one address will be shows). Wait a few seconds until it is connected. The follows picture will appear:
~ Enter the personal information, synchronizing; read, edit the data as the screen instruction as: Setting: Enter to setting menu Device: To read the list of searched Pedometers. : To read the exercise record : To read the exercise record in chart : Enter to setting menu Sync: Synchronizing the data between the Pedometer and phone
ACCESSORIES 1 x CR 2025 Button Cell 1 x USB Dongle 1 x Driver CD 1 x Wristband 1 x Matching Clip 1 x User's Manual SPECIFICATIONS AND ACCESSORIES ARE SUBJECT TO CHANGE WITHOUT NOTICE.
Notes: ~ When synchronize to smart phone, make sure the Pedometer is not in sleep mode. If it is in sleep mode. Shock or tap to wake it up. ~ A Pedometer can synchronize to one smart phone only. ~ When synchronize to phone, the clock on the Pedometer will be update automatically.
LIMITED WARRANTY Craig warrants this product to be free from manufacturing defects in material and workmanship under normal use for a period of 90 days from date of purchase. If service is required, please return the product to the store where it was purchased for exchange; or, pack the unit in the original packing material with all accessories if applicable, a copy of your sales receipt and a Cashier’s check or Money Order for $12.00 (to cover shipping and handling costs) payable to Craig Electronics Inc. For consumers in Canada, please make sure that the cashier check or money order is redeemable through a U.S. bank. Ship your product freight pre-paid. Your unit will be repaired, replaced or if the unit can not be repaired or replaced, a refund will be forwarded to you within four weeks of receipt of your unit. Please ship your unit to:
Craig Electronics Inc. 1160 NW 163 Drive Miami, Fl 33169
This warranty is void if the product has been: a) Used in a commercial application or rental. b) Damaged through misuse, negligence, or abuse. c) Modified or repaired by anyone other than an authorized Craig service center. d) Damaged because it is improperly connected to any other equipment. Note: This warranty does not cover: a) Ordinary adjustments as outlined in the Owner’s Manual which can be performed by the customer. b) Damage to equipment not properly connected to the product. c) Any cost incurred in shipping the product for repair. d) Damage to the product not used in the USA. This warranty is not transferable and only applies to the original purchase. Any implied warranties, including the warranty of merchantability, are limited in duration to the period of this expressed warranty and no warranty whether expressed or implied shall apply to the product thereafter. Under no circumstance shall Craig be liable for any loss or consequential damage arising out of the use of this product. This warranty gives specific legal rights. However, you may have other rights which may vary from state to state. Some states do not allow limitations on implied warranties or exclusion of consequential damage. Therefore, these restrictions may not apply to you. To Obtain Service on your Product email:
[email protected] Printed in China
CC427_WC_E0HJ1_J2US
