P3115

Transcript

P3115 P3115 INDOOR/OUTDOOR TWO WAY COAX SPEAKER SYSTEM APPLICATIONS • Outdoor Sound Reinforcement in medium and large spaces • Very High-Level AV Playback • Flown cluster configurations • Large speech systems • Music Sound Reinforcement FEATURES • Weatherproof cabinet IP 55 • Aluminium grill and stainless steel bracket • One 15” high-output LF transducer with 2” voice coil • One RCF Precision Neo 1” C. Driver with 1.5” voice coil for P3115 • 90° x 60° constant directivity horn for P3115 • 10° X 20° enclosure sides for array configurations • Active Mosfet Compression Driver Protection • 12 brass suspension points (M10) • Line transformer The P3115 is a weatherproof full range, wide-dispersion, coaxial two way loudspeaker system offering substantial power and efficiency for a variety of professional indoor or outdoor applications. The high frequency section is a constant directivity CMD horn loaded to a 1” RCF Precision Neodymium compression driver with a 1.5” diaphragm assembly for smooth, wide dispersion. The low-frequency transducer is a 15” woofer with a 2.5” voice coil. The P3115 features a selectable line transformer for 70 - 100 Volt applications. The cabinet is a single piece rotational moulded in medium density polyethylene, fully UV protected. The cabinet is equipped with 12 x M 10 brass inserts, a stainless steel U-Bracket and pair of spacers for 90° mounting. The front logo is in aluminium and rotatable. The grille is in custom perforated aluminium with open-cell fibres and water repellent woven fabric backing. The P3115 meets the requirements of IP 55 code (International Protection Rating) SYSTEM Freq. Range (-10 db): Freq. Range (-3 db): Horiz. Coverage angle (-6 db): Vertical coverage angle (-6 db): Directivity factor; q: System sensitivity: Rated maximum spl: System nominal impedance: System input power rating rms: System input power rating peak: Constant voltage line: Selectable power: Hf protection: Crossover: 75 Hz - 20 kHz 100 Hz - 20 kHz 90° 60° 13.3 98 dB , 1W @ 1m 129 dB, @ 1m 16 Ohm 300 W 1200 W 70/100 V 70V/60W, 30W; 100V/120W, 60W Dynamic 1.3 kHz TRANSDUCERS Nominal impedance: Input power rating: Sensitivity: 15” (380 mm) woofer with 2.5” (64 mm) coil 16 Ohm 250 W AES ; 500 W Peak 98 dB, 1W @ 1m High frequency: Nominal impedance: Input power rating: Sensitivity: 1”(25.4 mm) throat, 1.5” (35.5mm) coil 8 Ohm 25 W AES ; 100 W Peak 108 dB, 1W @ 1m Low frequency: PHYSICAL Enclosure: Rigging inserts: Color: Grille: Input connectors: Dimensions (HxWxD): Weight: Trapezoidal, 10° Horizontal side angles, 20° Vertical side angle, 8 mm Polyethylene rotomoulded 12 x M8 + U-Bracket and Pair of spacers Gray Custom perforated aluminium grille with open-cell fiber and water repellent woven fabric backing 4 x 1.5mm square, 5m Neoprene cable 18.22” x 18.22” x 17.04” 463 x 463 x 433 mm 42.76 lb - 19.4 Kg P3115 Beamwidth vs. Frequency Response 1W/1m 110 360 Horizontal Beamwidth (1/3 Octave) Vertical Beamwidth (1/3 Octave) 330 300 100 Coverage Angle (Deg.) 270 dB SPL 90 80 240 210 180 150 120 90 70 60 30 0 100 60 20 100 1000 Frequency (Hz) 10000 Directivity Index and Q 1000 Frequency (Hz) 10000 Normalized Horizontal off-axis Response 100 20 5 18 0 16 -5 Total Q 10 10 8 6 Directivity index Di, dB 12 Attenuation in dB 14 -10 -15 -20 4 -25 2 1 100 0 1000 Frequency (Hz) -30 100 10000 0 0 -5 -5 -10 -15 -20 -30 100 1000 Frequency (Hz) 10000 Normalized Vertical off-axis Response. Below the box 5 Attenuation in dB Attenuation in dB Normalized Vertical off-axis Response. Above the box 5 -25 Horizontal ±10 degrees Horizontal ±20 degrees Horizontal ±30 degrees Horizontal ±40 degrees Horizontal ±50 degrees Horizontal ±60 degrees -10 -15 -20 Vertical +10 degrees Vertical +20 degrees Vertical +30 degrees Vertical +40 degrees Vertical +50 degrees Vertical +60 degrees -25 1000 10000 -30 100 Vertical -10 degrees Vertical -20 degrees Vertical -30 degrees Vertical -40 degrees Vertical -50 degrees Vertical -60 degrees 1000 10000 P3115 Horizontal 1/3 Polar Plot Horizontal 1/3 Octave Polars 315 250 200 0° 330° 30° 300° -48 -42 -36 -30 -24 -18 -12 -6 240° -6 -12 -18 -24 -30 -36 -42 -48 150° 2500 2000 1600 30° 300° Horizontal 1/3 Octave Polars -48 -42 -36 -30 -24 -18 -12 -6 240° 5000 4000 3150 0° 30° Horizontal 1/3 Octave Polars -6 -12 -18 -24 -30 -36 -42 -48 -48 -42 -36 -30 -24 -18 -12 -6 240° 150° 60° 270° 0 90° 0 -6 -12 -18 -24 -30 -36 -42 -48 -48 -42 -36 -30 -24 -18 -12 -6 240° 0 120° 150° 210° 30° 300° 120° 180° 10000 8000 6300 0° 330° 60° 90° 0 120° 210° 150° 180° 270° 0 0 120° 210° 300° 90° -6 -12 -18 -24 -30 -36 -42 -48 -48 -42 -36 -30 -24 -18 -12 -6 240° 150° 330° 60° 270° 0 -6 -12 -18 -24 -30 -36 -42 -48 180° 0° 330° 60° 90° 0 120° 210° 30° 270° 0 240° 180° Horizontal 1/3 Octave Polars -48 -42 -36 -30 -24 -18 -12 -6 1250 1000 800 0° 330° 300° 90° 0 Horizontal 1/3 Octave Polars 60° 270° 0 120° 210° 30° 300° 90° -6 -12 -18 -24 -30 -36 -42 -48 630 500 400 0° 330° 60° 270° 0 Horizontal 1/3 Octave Polars 150° 210° 180° 180° Vertical 1/3 Polar Plot Vertical 1/3 Octave Polars 315 250 200 90° 120° 60° 150° -48 -42 -36 -30 -24 -18 -12 -6 210° -6 -12 -18 -24 -30 -36 -42 -48 300° 2500 2000 1600 60° 150° Vertical 1/3 Octave Polars -48 -42 -36 -30 -24 -18 -12 -6 210° 0 330° 300° 240° 270° 5000 4000 3150 90° 60° Vertical 1/3 Octave Polars 210° 0 330° 300° 240° 270° 60° 150° 0° -48 -42 -36 -30 -24 -18 -12 -6 10000 8000 6300 90° 120° 30° -6 -12 -18 -24 -30 -36 -42 -48 300° 270° 180° 0 0 330° 240° 150° 0° -6 -12 -18 -24 -30 -36 -42 -48 -48 -42 -36 -30 -24 -18 -12 -6 210° 300° 120° 30° 180° 0 -6 -12 -18 -24 -30 -36 -42 -48 270° 90° 120° 30° 0° 0 330° 240° 60° 180° 0 210° 270° Vertical 1/3 Octave Polars -48 -42 -36 -30 -24 -18 -12 -6 1250 1000 800 90° 120° 150° 0° 0 Vertical 1/3 Octave Polars 30° 180° 0 330° 240° 60° 150° 0° -6 -12 -18 -24 -30 -36 -42 -48 630 500 400 90° 120° 30° 180° 0 Vertical 1/3 Octave Polars 30° 180° 0° 0 -6 -12 -18 -24 -30 -36 -42 -48 -48 -42 -36 -30 -24 -18 -12 -6 210° 0 330° 300° 240° 270° P3115 CSI PRODUCT SPECIFICATIONS FOR DESIGNERS, SPECIFIERS, AND CONSULTANTS (ALSO KNOWN AS “A&E SPECIFICATIONS”) The following are “Part 2 Products” CSI-type specifications. It is assumed that “Part 1 General – Administrative and Procedures” and “Part 3 Execution – Installation and Maintenance” are part of an overall audio system or project specification. PART 2 PRODUCTS 2.01 Approved Manufacturer/Product A. RCF, Via Raffaello 13, 42124, Reggio Emilia, Italy. B. Model number: P3115 2.02 Design Configuration: LF Sub-section: MR Sub-section: HF Sub-section: Two way active speaker 15” neodymium woofer, 64 mm voice coil 1,0” neodymium, 35.5 mm voice coil 2.03 Acoustical Proprieties Nominal dispersion angle: Axial frequency range (-10 dB): Axial frequency range (-3 dB): 90° x 60° 75Hz-20kHz 100Hz-20kHz 2.04 Physical Properties 463mm (18.22”) Cabinet: Rigging inserts: Color: Grille: 463mm (18.22”) Input Connectors: Dimensions (H x W x D): Weight: 433mm (17.04”) Polyethylene rotomoulded 12 x M8 + U-Bracket and pair of spacers Gray Custom perforated aluminium grille with open-cell fiber and water repellent woven fabric backing 4 x 1.5mm square, 5m Neoprene cable 463 x 463 x 433 mm (18.22” x 18.22” x 17.04”) 19.4 kg (42.76 lbs.) 2.05 Accessories AC P15A-BR 472mm (18.58”) 472mm (18.58”) www.rcfaudio.com Cluster brackets for P3115/P6215 (including 4 brackets to cluster 2 speakers)