Transcript
P
MACHINE CODE /B21100 MODEL P350C COIL NAILER
TOOL SCHEMATIC AND PARTS IMPORTANT! DO NOT DESTROY Always refer to safety and maintenance manual #403606 for detailed information on this tool. It is the customer's responsibility to have all operators and service personnel read and understand this information.
MACHINE CODE : B21100
P350C
1 3
6
2
500755
24
5 27
26 75
25
28 7
29 30
8 31
9 10
32 33
11
12
74
34
13
36
37 48
57
45 44
47 49
52 21
41
43 46
38
62
20
75 39 Trigger 40 Assembly #501039 42
35 59 53 35
60 54
53
51 50
55
68
22
63
69 66 60
58 59
15
64 61 62
17
4 71
65
12
70
18 72 19 56
23
WARNING All parts must be periodically inspected and replaced if worn or broken. Failure to do this can affect the tool's operation and present a safety hazard.
67
MACHINE CODE /B21100 ▲1
2 ➔3 ➔4 5 6 7 8 9 10 *11 *12 13 *15 *16 17 18 *19 *20 21 ■ *22 *23 24 25 26 *27 28 29 30 31 32 33 34 35 36 37 *38 * ** ▲ ■
501043 501016 501300 092757 500680 501001 500754 500744 500743 500742 091986 092235 500947 500249 091864 500681 500779 501002 092971 500745 402021 500866 501023 091622 500746 092042 500739 501018 404663 004224 402666 008388 500758 071297 097746 401958 094295
1 1 4 2 1 1 1 1 1 1 1 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 1 1 1 1 1 3 1 1 1
P350-C, 500755
T.H.S.C.S. 1/4-20 x 1/2” Air Deflector S.H.C.S. 1/4-20 x 1-1/4” Flatwasher 1/4” Cap Gasket, Cap Spacer, Exhaust Stop, Piston Spring, Valve Seat, Spring O-Ring O-Ring Valve Assembly O-Ring O-Ring Sleeve Flange, Sleeve O-Ring O-Ring Piston Driver Blade Bumper Grip Reducing Pipe Bushing End Cap O-Ring Housing Label, Housing Spring,W.C.E. S.H.C.S. 10 -32 x 3/8” Bushing Flat Washer #10 W.C.E. Roll Pin Valve Pin Valve Body O-Ring
Denotes normal wear items NOTE: Make sure Warning Label (500492) is properly affixed. Replace if necessary. Label available at no charge through Service Department. Apply Loctite 242 (Blue) Part No. 093500 Apply Loctite 680 (Green) Part No. 219241
39 40 41 42 43 44 45 46 47 *48 *49 50 51 52 53 54 ▲55 56 57 58 59 60 61 62 63 64 65 66 67 68 ➔69 70 **71 72 73 74 ➔75
501008 501010 402669 501009 263239 402018 402084 402024 500674 402031 091541 500803 500756 500715 402668 095417 009016 500677 500700 402037 097748 402486 500675 402487 500817 091733 005562 501080 009041 500791 402662 500678 500459 501216 092174 500199 501299
PARTS LEGEND 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 4 4 1 1 1 2 2 1 2 1 2 1 1 3 1 1 1 1 1 1 1 2
Lever, Bottom Trip Trigger Pin, Trigger Spirol Pin Retaining Ring End Cap, Feeder Body Bumper, Feed Piston Spring, Feed Claw Piston Feed Claw Piston O-Ring O-Ring Tray Assembly Nose Feed Claw Retaining Washer Lockwasher S.H.C.S. 5/16-18 x 1” Hinge Pin Spring, Feed Claw Holdback Spring Retaining Washer Locator Pivot Pin Magazine Flexloc Thin Nut F.H.S.C.S. 1/4-20 x 5/8” Magazine Adjust. Label S.H.C.S. 1/4 x 3/4” Nameplate Debris Shield Cover, Magazine Warning Label Logo, Magazine O-Ring Spring S.H.C.S. 1/4-20 x 1”
AIR CONSUMPTION CHART
MACHINE CODE : B21100
P350-C
ACCESSORIES Bump Fire Operating Kit This special attachment is designed for bump fire operation
tPart No. 501048
Remote Fire Valve This valve via a positive air signal allows a machine mounted tool to be operated from an automatic air valve or foot pedal system.
Part No. 1X0713
Lubricant
Part No. F27625
Lubricating Oil 8 oz.
Degreaser Safety Cleaner Ideal cleaner for all Paslode tools.
Part No. B20544L
Belt Hook/Hanger Rafter Hook/Hanger Combination Rafter-Belt/Hanger
Part No. 219239 Part No. 219242 Part No. 501073
SAFETY INSTRUCTIONS
DO NOT EXCEED MAXIMUM RECOMMENDED AIR PRESSURE
Printed in U.S.A. © 2002, Illinois Tool Works, Inc.
0
60
P
120
Never use any bottled air or gases such as oxygen to operate the tool since they could cause the tool to explode.
60
120
Always wear hearing protection and eye protection devices, including side shields when operating or working in the vicinity of a tool.
0
WEAR EYE AND HEARING PROTECTION
An Illinois Tool Works Company 888 Forest Edge Drive Vernon Hills, Illinois 60061-4503
Operate the tool using only the recommended air pressure. Do not exceed the maximum air pressure marked on the tool. Be sure the air pressure gauge is operating properly and check it at least twice a day.
405639-3 10/02
