Transcript
www.westekuk.com
P4495R 4U Rugged Server Extremely Rugged MIL Spec 4U Server Single, Dual or Quad Processors AC or DC Power Options Hot Swappable Storage Options Wide Operating Temperature Range Shock and Vibration Tolerant Rugged Rear Connectors IP52 Water Drip Proof Option Westek’s P4495R High Performance Rugged 4U Server is designed for use in high / low temperature environments, subject to shock and vibration. Westeks range of Rugged Servers are ideal for use in hostile environments including military COTS use. The server is designed to comply with MIL-STD-810, MIL-STD 461 and DEF STAN 59-411 for use in aircraft, mobile or fixed land based systems, transportation and naval environments below decks as well as general use where a ruggedized system is required. The P4495R is a customisable server system with a wide choice of storage, power supply and processor options including support for the latest Intel® Core i7 family and Xeon processors. The P4495R is manufactured from very tough corrosion resistant Aluzinc plated steel case with a 4mm thick plated aluminium front panel. An additional anti-corrosion paint finish is available for more severe marine environments. A typical high performance specification provides :
4x Intel® Embedded 10 Core Xeon Processors (40 cores) Full Size PCI-Express Expansion Slots Secured Anti-Vibration Fixings for Expansion Slots Dual 10 Gbit Ethernet Interfaces (other options available) 2x Hot Swap SSD Disk Drives in RAID 1 Mirror 128GB DDR Memory IP52 Drip Proof Version Rear Rugged MIL Specification Connectors Front Access Hot Swap Cooling Fans & Cleanable / Replaceable Dust Filter IPMI Remote Management and Alerting over Ethernet These systems are manufactured by Westek Technology in the UK using field proven technology to deliver a reliable rugged computing system. These systems may be customised to meet your exact requirements. With Westek’s rapid ISO9001:2008 design and manufacturing capabilities, custom built products can be delivered from concept in as little as 8 weeks. Westek also offers a full range of military specification test and verification services providing fully certified testing of tolerance to shock, vibration, operating environment, and EMI compliance.
Compliance Certification Formal compliance testing, certification and report services for specific custom builds are available. The standard build of the P4495R has been tested to the following MIL-STD 810 environmental requirements. MIL-STD 810 Environmental Test Criteria Operating Tests : Low Temperature
Method 502.4 Procedure 2
-20°C (-30°C available)
High Temperature
Method 501.4 Procedure 2
+55°C
Humidity
Method 507.4
5 x 48 hour cycles
Vibration
Method 514.5 Category 4
10—500Hz 1.04G
Shock
Method 516.5
20G 11mSec TPS 3 axis
Shock
Method 516.5
40G 11ms TPS 3 axis
Low Temperature storage
Method 501.4
-45°C
High Temperature Storage
Method 502.4 Procedure 1
+70°C
Vibration
Method 514.6 Category 4 fig 514.6C-VI
5Hz to 500Hz @ 2.24Grms
Non Operating Tests
MIL-STD 461 EMC/EMI Test Criteria CE101
Conducted Emissions
60Hz - 10KHz
CE102
Conducted Emissions
10KHz - 10MHz
CS101
Conducted Susceptibility Power Leads
30Hz - 150KHz
CS114
Conducted Susceptibility Bulk Cable Injection
10KHZ - 200MHz
CS116
Conducted Susceptibility
Surface Ship Limits
RE101
Radiated Emissions Electric Field
30Hz - 100KHz
RE102
Radiated Emissions Electric Field
10KHz - 18GHz
RS101
Radiated Susceptibility Magnetic Field
100HZ - 100KHz
RS103
Radiated Susceptibility Electric Field 10V/M
10KHZ - 18GHz
The P4495R is designed to meet or has been tested to the above EMI requirements based on formal testing of similar rugged server units. Formal verification to other standards including DEF-STAN 59-411 is available as an optional service.
Server Engine Choice of Intel® Chipset Server Engine Single (i5,i7 or Xeon), or Dual / Quad Xeon Processors Core i5, i7 or Multicore E5 embedded series Xeons Up to 512GB DDR3 / DDR4 Memory SATA III or SAS SSD Disk Options Options for Multiple RS232/422/485 Serial Ports Options for Multiple Ethernet Ports Options for Multiple USB Ports Integrated Graphics with High Performance Options Available
I/O All I/O is presented on rugged connectors, usually circular MIL DTL types. Metal D-types may also be specified for some applications. Any add in cards are fitted and secured at build time and the appropriate rugged I/O connectors provisioned. The rear I/O plate is a customisable part and is fitted with the rugged connectors required. A direct interface option is also available. Storage Up to 24 x hot swap wide temperature 2.5” SSD Disk Drives with RAID 0,1,5,6,10,50 Options (with single or dual Xeon processors) or up to 8 x hot swap 2.5” SSD Disk Drives with RAID 0,1,5,6,10,50 (with quad Xeon processors). Environment Operating: Temperature Range: -20°C to +55 °C Humidity: 10 to 95% Humidity Non-Condensing Vibration: 1.04grms+ with SSD 10Hz to 1KHz Shock: 20G / 11mSec Altitude: -300 to +5000 metres Water Drip Proof IP52 Version Available Salt Fog Compliant Option Available
Non-Operating: Storage: -45°C to +75°C Humidity: 10 to 95% Humidity Non-Condensing Vibration: 2.2grms+ 10Hz to 1KHz Shock: 40G / 11mSec Altitude: -300 to +12000 metres Actual specification depends on configuration
Physical Dimensions: 431mm(W) x 177mm (H) x 600(D)mm Weight (Net): Approximately 25Kg (depending on build options and connectors) CE Compliance: EEC EMC & Safety Compliant with MIL-STD 461F EMI and EMC RoHS Compliant Tested to Relevant Parts of MIL-STD 810F Environmental Specifications
Westek Technology Ltd Unit 1 Lancaster Park Bowerhill Melksham Wiltshire United Kingdom SN12 6TT
Tel: +44 (0)1225 790600 Fax: +44 (0)1225 702968 E-mail:
[email protected] Web site: www.westekuk.com Specifications subject to change without notice
