Transcript
Valid July 1st 2011
Available CFO products CFO Series fibre optic video transmission products
Contents
Teleste CFO Introduction
Teleste CFO Introduction . . . . . . . . . . . . . . . . . 2
Nearly two decades the traditional fiber optics operation has been the core technology in many security video systems. With a successfull background in this field Teleste continues the tradition by it´s well-know CFO product range. Today the fully redesigned CFO platform is ready to challenge any modern system requirement in the class of uncompressed realtime video transmission.
CFO First Mile Series with SFP optics . . . . . . 3-4 CFO410 Series . . . . . . . . . . . . . . . . . . . . . . . 3 CFO810 Series . . . . . . . . . . . . . . . . . . . . . . . 3 CFO420 Series . . . . . . . . . . . . . . . . . . . . . . . 4 CFO820 Series . . . . . . . . . . . . . . . . . . . . . . . 4
CFO First Mile Series with Basic Optics . . . . 5-7 CFO100 Series . . . . . . . . . . . . . . . . . . . . . . . 5 CFO121 Series . . . . . . . . . . . . . . . . . . . . . . . 5 CFO331 Series . . . . . . . . . . . . . . . . . . . . . . . 5 CFO432 Series . . . . . . . . . . . . . . . . . . . . . . . 6 CFO161 Series . . . . . . . . . . . . . . . . . . . . . . . 6 CFO191 Series . . . . . . . . . . . . . . . . . . . . . . . 6 CFO461 Series . . . . . . . . . . . . . . . . . . . . . . . 6 CFO491 Series . . . . . . . . . . . . . . . . . . . . . . . 7 CFO541 Series . . . . . . . . . . . . . . . . . . . . . . . 7 CFO861 Series . . . . . . . . . . . . . . . . . . . . . . . 7 CFO891 Series . . . . . . . . . . . . . . . . . . . . . . . 7
CFO OPX CWDM Transmission System . . 8-12 CEV Video modems . . . . . . . . . . . . . . . . . . . 8 COM Optical passives . . . . . . . . . . . . . . . . 10 Add/Drop units . . . . . . . . . . . . . . . . . . . . . . 10 Mux/Demux units . . . . . . . . . . . . . . . . . . . . 10 COR Optical repeaters . . . . . . . . . . . . . . . . 11 Wideband & dual window splitters . . . . . . 11 Wavelength division multiplexer . . . . . . . . 11 CES Fast Ethernet Ethernet switches . . . . 12 SFP Transceivers for Fast Ethernet . . . . . . 12 CES Gigabit Ethernet Ethernet switches . 12 SFP Transceivers for Gigabit Ethernet . . . 12
SFP Tranceiver Modules . . . . . . . . . . . . . . . . . 14 SFP Modules for Fast Ethernet . . . . . . . . . 14 SFP Modules for Gigabit Ethernet . . . . . . 14
CFO Accessories . . . . . . . . . . . . . . . . . . . . 15-17 Accessories for rack installation . . . . . . . . 15 Accessories for stand-alone installation . . 16 CLP line protection modules . . . . . . . . . . . 16 Optical switch . . . . . . . . . . . . . . . . . . . . . . . 16 CRX918 Contact closure mux/demux . . . . 16 Fibre Patch cords and accessories . . . . . . 17 Connection cables . . . . . . . . . . . . . . . . . . . 17
CFO OPX Block Diagram Examples . . . . . . . . 18 CFO Product Overview . . . . . . . . . . . . . . . . . . 19
2
CFO First Mile offering is mainly looking at point-to-point type operation. This series provides an efficient transmission system for isolated cctv islands or alternatively bring the outer edge cctv cameras into a reach of a more sophisticated network cloud for further signal forwarding. Depending on the needed functionality a selection of different type of links are available either for video only type needs, or for video feeds requiring additional data, contact closure, audio or even ethernet communication as well. CFO First Mile series covers both multimode and single mode fibre environments. CFO OPX series is a perfect match for fibre optic transmission systems requiring a much more complex approach on system topology. CFO OPX is based on optical multiplexing technology and allows efficient building of multi-wavelenght optical system covering point-to-point, add-and-drop and ring type topologies. Extreme distances or other unexpected fiber losses can be handled by using a series of optical repeaters. CFO OPX is based on ITU-T G694.2 recommendation and uses eight selected optical wavelengths between 1470nm and 1610nm. Naturally the passive backbone modules support also the use of 1310nm optical window and hence allowing a parallel use over any legacy system. As in First Mile offering also multiple audio and data channels are available. For Ethernet communication needs there are units supporting either bridging type operation up to 100 Mbps or more complex switching devices with up-links up to 1 Gbps rates. All CFO devices share the same installation schemes. All rack card type CFO units are compatible with CSR range installation racks and CMA range standalone module adapters. Special mini-size modules are provided with required mounting mechanics. The most typical supply voltage is 12 VDC, however some transmitter modules are also able to take benefit of 24 VAC supply voltage as well. Most of the CFO devices are feasible for temperature hardened operation (-34...+74 °C / -29...165 °F). Depending on model the unit configuration is done either with user-selectable DIP-switch settings or via a hyperterminal/telnet type user management interface. SNMP is supported in selected CFO units.
CFO First Mile Series with SFP optics The new CFO First Mile SFP product line provides a new fresh approach for cost effective fibre optic video transmission. The new series consist of 4-ch and 8-ch video multiplexers either for “video only” type operation or operation supported with one bi-directional RS-data channel. The optics are provided by
a hot-swappable SFP transceiver module. Based on required functionality ready-assembled link combinations are available as shown in the list below. Also bare modules without SFP optics are available. For other optical requirements please refer to our selection of suitable MSG series SFP transceivers (p. 14).
CFO410 Series – Four channel video only link for fixed camera applications The CFO410 series provides uncompressed and real-time digital transmission of four (4) composite video channels (2-ch for Y/C). Units are standard CFO rack mount cards (5HP wide). Stand-alone (SA) unit is embedded to CMA011 module adapter. Temperature hardened (-34...+74 °C). Optical connector LC/PC (SFP). CMT410S
4-ch video transmitter SA (incl. CMA011)
CRT410S
4-ch video transmitter
CRR410S
4-ch video receiver
CMT410M
4-ch video transmitter SA (incl. CMA011)
CRT410M
4-ch video transmitter
CRR410M
4-ch video receiver
CMT410L
4-ch video transmitter SA (incl. CMA011)
CRT410L
4-ch video transmitter
CRR410L
4-ch video receiver
CRT410
4-ch video transmitter without optics
CRR410
4-ch video receiver without optics
SFP 2 km multimode
SFP 20 km single-mode
1310 nm multimode fibre up to 2 km 1310 nm single-mode fibre up to 20 km
SFP 40 km single-mode
1310 nm single-mode fibre up to 40 km
SFP to be ordered separately
Vx4 CFO810 Series – Eight channel video only link for fixed camera applications The CFO810 series provides uncompressed and real-time digital transmission of eight (8) composite video channels (4-ch for Y/C). Units are standard CFO rack mount cards (10HP wide). Stand-alone (SA) unit is embedded to CMA025 module adapter. Temperature hardened (-34...+74 °C). Optical connector LC/PC (SFP). CMT810S
8-ch video transmitter SA (incl. CMA025)
CRT810S
8-ch video transmitter
CRR810S
8-ch video receiver
CMT810M
8-ch video transmitter SA (incl. CMA025)
CRT810M
8-ch video transmitter
CRR810M
8-ch video receiver
CMT810L
8-ch video transmitter SA (incl. CMA025)
CRT810L
8-ch video transmitter
CRR810L
8-ch video receiver
CRT810
8-ch video transmitter without optics
CRR810
8-ch video receiver without optics
Vx8
3
SFP 2 km multimode
SFP 20 km single-mode
1310 nm multimode fibre up to 2 km 1310 nm single-mode fibre up to 20 km
SFP 40 km single-mode
SFP to be ordered separately
1310 nm single-mode fibre up to 40 km
CFO420 Series – Four channel video link for PTZ camera applications The CFO420 series provides uncompressed and real-time digital transmission of four (4) composite video channels (2-ch for Y/C) with one (1) configurable bi-directional RS-data channel. Units are standard CFO rack mount cards (10HP wide). Stand-alone (SA) unit is embedded to CMA025 module adapter. Temperature hardened (-34...+74 °C). Optical connector LC/PC (SFP).
1310 nm multimode fibre up to 2 km
1310 nm single-mode fibre up to 20 km
1310 nm single-mode fibre up to 40 km
CMT420S
4-ch video transmitter SA (incl. CMA025)
CRT420S
4-ch video transmitter
CRR420S
4-ch video receiver
CMT420M
4-ch video transmitter SA (incl. CMA025)
CRT420M
4-ch video transmitter
CRR420M
4-ch video receiver
CMT420L
4-ch video transmitter SA (incl. CMA025)
CRT420L
4-ch video transmitter
CRR420L
4-ch video receiver
CRT420
4-ch video transmitter without optics
CRR420
4-ch video receiver without optics
SFP 2 km multimode
SFP 20 km single-mode
SFP 40 km single-mode
SFP to be ordered separately
Vx4 Dx1 CFO820 Series – Eight channel video link for PTZ camera applications The CFO820 series provides uncompressed and real-time digital transmission of eight (8) composite video channels (4-ch for Y/C) with one (1) configurable bi-directional RS-data channel. Units are standard CFO rack mount cards (10HP wide). Stand-alone (SA) unit is embedded to CMA025 module adapter. Temperature hardened (-34...+74 °C). Optical connector LC/PC (SFP).
1310 nm multimode fibre up to 2 km
1310 nm single-mode fibre up to 20 km
1310 nm single-mode fibre up to 40 km
4
CMT820S
8-ch video transmitter SA (incl. CMA025)
CRT820S
8-ch video transmitter
CRR820S
8-ch video receiver
CMT820M
8-ch video transmitter SA (incl. CMA025)
CRT820M
8-ch video transmitter
CRR820M
8-ch video receiver
CMT820L
8-ch video transmitter SA (incl. CMA025)
CRT820L
8-ch video transmitter
CRR820L
8-ch video receiver
CRT820
8-ch video transmitter without optics
CRR820
8-ch video receiver without optics
Vx8 Dx1
SFP 2 km multimode
SFP 20 km single-mode
SFP 40 km single-mode
SFP to be ordered separately
CFO First Mile Series with Basic Optics The CFO First Mile Basic line provides cost effective and easy to install video, data, audio, contact closure and Ethernet transmission over a multimode optical fibre even up to 6.5 kilometres, and in single-mode fibre applications up to distances of tens of kilometres.
The fully digital product range varies from one channel video only links up to eight-channel video links. CFO First Mile basic products take advantage of the most appropriate technology for the application, with the success factors being reliability, performance and ease of installation. The product line includes cards for rack mount, module adapters for stand-alone installation and all other necessary accessories.
CFO100 Series – One channel video only link for fixed camera applications The CFO100 series provides uncompressed digital transmission of one CVBS video channel over one multimode (1310 nm) fibre for up to 6.5 km. Available in stand-alone small size transmitter unit and rack mount transmitter/receiver card formats. CPT101 can be operate with 12 VDC and 24 VAC. Temperature hardened (-34...+74 °C). 1/3 x ST optical connector. CPT101
Video transmitter
Small size stand-alone unit (DIN mounting kit optional, see CIK001)
CRT103
Video transmitter, triple channel
5HP wide rack mount card
CRR101
Video receiver
5HP wide rack mount card
CRR103
Video receiver, triple channel
5HP wide rack mount card
Vx1
Vx1 Vx1 Vx1
1310 nm multimode fibre up to 6.5 km
CFO121 Series – One channel video link for PTZ camera applications The CFO121 series provides uncompressed digital transmission of one CVBS video channel with bi-directional data (3), audio (2) and contact closure (1) channels over one multimode (1310/850 nm) fibre for up to 3.5 km. Available in stand-alone transmitter/receiver units and rack mount transmitter/receiver card formats. Temperature hardened (-34...+74 °C). 1 x ST optical connector. CMT121
Video transmitter
Stand-alone unit in a mini-CMA module
CRT121
Video transmitter
10HP wide rack mount card
CRR121
Video receiver
10HP wide rack mount card
CMR121
Video receiver
Stand-alone unit in a mini-CMA module gmt
Vx1 Dx3 Ax2 C x1C M
1310/850 nm multimode fibre up to 3.5 km
CFO331 Series – One channel video link for PTZ camera applications The CFO331 series provides uncompressed digital transmission of one CVBS video channel with bi-directional data (1) and contact closure (1) channels over one multimode (1310/1550 nm) fibre for up to 5 km. Available in stand-alone compact size transmitter unit and rack mount receiver card formats. CPT331 can be operate with 12 VDC and 24 VAC. Temperature hardened (-34...+74 °C). 1 x SC/PC optical connector. CPT331
Video transmitter
Compact size stand-alone unit
CRR331
Video receiver
5HP wide rack mount card
Vx1 Dx1 C x1C
5
1310/1550 nm multimode fibre up to 5 km
CFO432 Series – Four channel video link for PTZ camera applications The CFO432 series provides uncompressed digital transmission of four CVBS or two Y/C video channels with bi-directional data (3), audio (2), contact closure (1) channels and one 10/100Base-Tx Ethernet Bridge over two multimode fibres (1310 nm Tx/Rx) for up to 1.5 km. Temperature hardened (-34...+74 °C). 2 x LC/PC optical connector. Video transmitter
Stand-alone unit with case (module adapter CMA025 included)
CRT432
Video transmitter
10HP wide rack mount card
CRR432
Video receiver
10HP wide rack mount card
Vx4 Dx3 Ax2 C x1C Ex1 M
gmt
1310 nm multimode fibre up to 1.5 km (OM1) / 2 km (OM2)
CMT432
CFO161 Series – One channel video link for PTZ camera applications The CFO161 series provides uncompressed digital transmission of one CVBS video channel with bi-directional data (3), audio (2), contact closure (1) channels and one 10/100Base-Tx Ethernet Bridge over one single-mode (1310/1310 nm) fibre for up to 50 km. Temperature hardened (-34...+74 °C). 1 x SC/APC 8° optical connector. Video transmitter
Stand-alone unit with case (module adapter CMA025 included)
CRT161
Video transmitter
10HP wide rack mount card
CRR161
Video receiver
10HP wide rack mount card
Vx1 Dx3 Ax2 C x1C Ex1 M
gmt
1310/1310 nm single-mode fibre 20 dB link budget
CMT161
CFO191 Series – One channel video link for PTZ camera applications The CFO191 series provides uncompressed digital transmission of one CVBS video channel with bi-directional data (3), audio (2), contact closure (1) channels and one 10/100Base-Tx Ethernet Bridge over one single-mode (1550/1310 nm) fibre for up to 60 km. Temperature hardened (-34...+74 °C). 1 x SC/APC 8° optical connector. Video transmitter
Stand-alone unit with case (module adapter CMA025 included)
CRT191
Video transmitter
10HP wide rack mount card
CRR191
Video receiver
10HP wide rack mount card
Vx1 Dx3 Ax2 C x1C Ex1 M
gmt
1550/1310 nm single-mode fibre 24 dB link budget
CMT191
CFO461 Series – Four channel video link for PTZ camera applications The CFO461 series provides uncompressed digital transmission of four CVBS or two Y/C video channels with bi-directional data (3), audio (2), contact closure (1) channels and one 10/100Base-Tx Ethernet Bridge over one single-mode (1310/1310 nm) fibre for up to 50 km. Temperature hardened (-34...+74 °C). 1 x SC/APC 8° optical connector.
6
Video transmitter
Stand-alone unit with case (module adapter CMA025 included)
CRT461
Video transmitter
10HP wide rack mount card
CRR461
Video receiver
10HP wide rack mount card
Vx4 Dx3 Ax2 C x1C Ex1 M
gmt
1310/1310 nm single-mode fibre 20 dB link budget
CMT461
CFO491 Series – Four channel video link for fixed camera applications The CFO491 series provides uncompressed digital transmission of four CVBS or two Y/C video channels with uni-directional data (3), audio (2) and contact closure (1) channels over one single-mode (1550/1310 nm) fibre for up to 60 km. Temperature hardened (-34...+74 °C). 1 x SC/APC 8° optical connector. CMT491
Video transmitter
Stand-alone unit with case (module adapter CMA025 included)
CRT491
Video transmitter
10HP wide rack mount card
CRR491
Video receiver
10HP wide rack mount card 1550/1310 nm single-mode fibre 24 dB link budget
gmt
Vx4 Dx3 Ax2 C x1C Ex1 M
CFO541 Series – One channel video link for PTZ camera applications The CFO541 series provides uncompressed digital transmission of one CVBS video channel with bi-directional data (1) and contact closure (1) channels over one single-mode (1310/1550 nm) fibre for up to 60 km. Available in stand-alone compact size transmitter unit and rack mount receiver card formats. Temperature hardened (-34...+74 °C). 1 x SC/PC optical connector. CCT541
Video transmitter
Add-on board to Spectra IV Dome
CPT541
Video transmitter
Compact size stand-alone unit (DIN mounting kit optional, see CIK001)
CRR541
Video receiver
5HP wide rack mount card 1310/1550 nm single-mode fibre up to 60 km
Vx1 Dx1 C x1C CFO861 Series – Eight channel video link for PTZ camera applications The CFO861 series provides uncompressed digital transmission of eight CVBS or four Y/C video channels with bi-directional data (3), audio (2), contact closure (1) channels and one 10/100Base-Tx Ethernet Bridge over one single-mode (1310/1310 nm) fibre for up to 50 km. Temperature hardened (-34...+74 °C). 1 x SC/APC 8° optical connector. CMT861
Video transmitter
Stand-alone unit with case (module adapter CMA035 included)
CRT861
Video transmitter
15HP wide rack mount card
CRR861
Video receiver
15HP wide rack mount card 1310/1310 nm single-mode fibre 20 dB link budget
gmt
Vx8 Dx3 Ax2 C x1C Ex1 M
CFO891 Series – Eight channel video link for fixed camera applications The CFO891 series provides uncompressed digital transmission of eight CVBS or four Y/C video channels with uni-directional data (3), audio (2) and contact closure (1) channels over one single-mode (1550/1310 nm) fibre for up to 60 km. Temperature hardened (-34...+74 °C). 1 x SC/APC 8° optical connector. CMT891
Video transmitter
Stand-alone unit with case (module adapter CMA035 included)
CRT891
Video transmitter
15HP wide rack mount card
CRR891
Video receiver
15HP wide rack mount card
7
gmt
Vx8 Dx3 Ax2 C x1 Ex1 M C
1550/1310 nm single-mode fibre 24 dB link budget
CFO OPX CWDM Transmission System Teleste’s CFO OPX series utilises Coarse Wavelength Division Multiplexing (CWDM) technology for the transmission of 64 (or higher when combined with 1310 nm) video channels with bi-directional data, audio, contact closure and Ethernet traffic
over one shared single-mode fibre for up to 60...80 km. Available as 5HP, 10HP and 15HP building block card formats, the CFO OPX is a very flexible and reliable product for demanding applications in professional CCTV applications.
CEV – Four channel video modems for PTZ camera applications The CEV series bi-directional video modem provides uncompressed digital transmission of four CVBS or two Y/C video channels with bi-directional data (3), audio (2), contact closure (1) channels and one 10/100Base-Tx Ethernet Bridge over one single-mode (CWDM) fibre for up to tens of kilometers. Temperature hardened (-34...+74 °C). 1 x SC/APC 8° optical connector.
1470...1610 nm single-mode fibre 20 dB link budget
CEV-A-A4TB-C11A-AA-A
Video transmitter, CWDM 1470 nm, std, -1 dBm
CEV-A-A4TB-C12A-AB-A
Video transmitter, CWDM 1490 nm, std, -1 dBm
CEV-A-A4TB-C13A-AC-A
Video transmitter, CWDM 1510 nm, std, -1 dBm
CEV-A-A4TB-C14A-AD-A
Video transmitter, CWDM 1530 nm, std, -1 dBm
CEV-A-A4TB-C15A-AE-A
Video transmitter, CWDM 1550 nm, std, -1 dBm
CEV-A-A4TB-C16A-AF-A
Video transmitter, CWDM 1570 nm, std, -1 dBm
CEV-A-A4TB-C17A-AG-A
Video transmitter, CWDM 1590 nm, std, -1 dBm
CEV-A-A4TB-C18A-AH-A
Video transmitter, CWDM 1610 nm, std, -1 dBm
CEV-A-A4RB-C11A-AA-A
Video receiver, CWDM 1470 nm, std, -21 dBm
CEV-A-A4RB-C12A-AB-A
Video receiver, CWDM 1490 nm, std, -21 dBm
CEV-A-A4RB-C13A-AC-A
Video receiver, CWDM 1510 nm, std, -21 dBm
CEV-A-A4RB-C14A-AD-A
Video receiver, CWDM 1530 nm, std, -21 dBm
CEV-A-A4RB-C15A-AE-A
Video receiver, CWDM 1550 nm, std, -21 dBm
CEV-A-A4RB-C16A-AF-A
Video receiver, CWDM 1570 nm, std, -21 dBm
CEV-A-A4RB-C17A-AG-A
Video receiver, CWDM 1590 nm, std, -21 dBm
CEV-A-A4RB-C18A-AH-A
Video receiver, CWDM 1610 nm, std, -21 dBm
10HP wide rack mount cards
gmt
Vx4 Dx3 Ax2 C x1C Ex1 M
CEV – Four channel video modems for fixed camera applications The CEV series uni-directional video modem provides uncompressed digital transmission of four CVBS or two Y/C video channels with uni-directional data (3), audio (2) and contact closure (1) channels over one single-mode (CWDM) fibre for up to tens of kilometers. Temperature hardened (-34...+74 °C). 1 x SC/APC 8° optical connector.
1470...1610 nm single-mode fibre 26 dB link budget
CEV-A-A4TA-C11X-BA-A
Video transmitter, CWDM 1470 nm, std, +2 dBm
CEV-A-A4TA-C12X-BB-A
Video transmitter, CWDM 1490 nm, std, +2 dBm
CEV-A-A4TA-C13X-BC-A
Video transmitter, CWDM 1510 nm, std, +2 dBm
CEV-A-A4TA-C14X-BD-A
Video transmitter, CWDM 1530 nm, std, +2 dBm
CEV-A-A4TA-C15X-BE-A
Video transmitter, CWDM 1550 nm, std, +2 dBm
CEV-A-A4TA-C16X-BF-A
Video transmitter, CWDM 1570 nm, std, +2 dBm
CEV-A-A4TA-C17X-BG-A
Video transmitter, CWDM 1590 nm, std, +2 dBm
CEV-A-A4TA-C18X-BH-A
Video transmitter, CWDM 1610 nm, std, +2 dBm
CEV-A-A4RA-XXXX-BI-A
Video receiver, CWDM 1470...1610 nm, std, -24 dBm gmt
Vx4 Dx3 Ax2 C x1C M
8
10HP wide rack mount cards
CEV – Eight channel video modems for PTZ camera applications The CEV series bi-directional video modem provides uncompressed digital transmission of eight CVBS or four Y/C video channels with bi-directional data (3), audio (2), contact closure (1) channels and one 10/100Base-Tx Ethernet Bridge over one single-mode (CWDM) fibre for up to tens of kilometers. Temperature hardened (-34...+74 °C). 1 x SC/APC 8° optical connector. CEV-A-A8TB-C11A-AA-B
Video transmitter, CWDM 1470 nm, std, -1 dBm
CEV-A-A8TB-C12A-AB-B
Video transmitter, CWDM 1490 nm, std, -1 dBm
CEV-A-A8TB-C13A-AC-B
Video transmitter, CWDM 1510 nm, std, -1 dBm
CEV-A-A8TB-C14A-AD-B
Video transmitter, CWDM 1530 nm, std, -1 dBm
CEV-A-A8TB-C15A-AE-B
Video transmitter, CWDM 1550 nm, std, -1 dBm
CEV-A-A8TB-C16A-AF-B
Video transmitter, CWDM 1570 nm, std, -1 dBm
CEV-A-A8TB-C17A-AG-B
Video transmitter, CWDM 1590 nm, std, -1 dBm
CEV-A-A8TB-C18A-AH-B
Video transmitter, CWDM 1610 nm, std, -1 dBm
CEV-A-A8RD-C11A-AA-B
Video receiver, CWDM 1470 nm, APD, -21 dBm
CEV-A-A8RD-C12A-AB-B
Video receiver, CWDM 1490 nm, APD, -21 dBm
CEV-A-A8RD-C13A-AC-B
Video receiver, CWDM 1510 nm, APD, -21 dBm
CEV-A-A8RD-C14A-AD-B
Video receiver, CWDM 1530 nm, APD, -21 dBm
CEV-A-A8RD-C15A-AE-B
Video receiver, CWDM 1550 nm, APD, -21 dBm
CEV-A-A8RD-C16A-AF-B
Video receiver, CWDM 1570 nm, APD, -21 dBm
CEV-A-A8RD-C17A-AG-B
Video receiver, CWDM 1590 nm, APD, -21 dBm
CEV-A-A8RD-C18A-AH-B
Video receiver, CWDM 1610 nm, APD, -21 dBm
1470...1610 nm single-mode fibre 20 dB link budget
15HP wide rack mount cards
gmt
Vx8 Dx3 Ax2 C x1C Ex1 M
CEV – Eight channel video modems for fixed camera applications The CEV series uni-directional video modem provides uncompressed digital transmission of eight CVBS or four Y/C video channels with uni-directional data (3), audio (2) and contact closure (1) channels over one single-mode (CWDM) fibre for up to tens of kilometers. Temperature hardened (-34...+74 °C). 1 x SC/APC 8° optical connector. CEV-A-A8TA-C11A-BA-B
Video transmitter, CWDM 1470 nm, std, +2 dBm
CEV-A-A8TA-C12A-BB-B
Video transmitter, CWDM 1490 nm, std, +2 dBm
CEV-A-A8TA-C13A-BC-B
Video transmitter, CWDM 1510 nm, std, +2 dBm
CEV-A-A8TA-C14A-BD-B
Video transmitter, CWDM 1530 nm, std, +2 dBm
CEV-A-A8TA-C15A-BE-B
Video transmitter, CWDM 1550 nm, std, +2 dBm
CEV-A-A8TA-C16A-BF-B
Video transmitter, CWDM 1570 nm, std, +2 dBm
CEV-A-A8TA-C17A-BG-B
Video transmitter, CWDM 1590 nm, std, +2 dBm
CEV-A-A8TA-C18A-BH-B
Video transmitter, CWDM 1610 nm, std, +2 dBm
CEV-A-A8RC-XXXX-BI-B
Video receiver, CWDM 1470...1610 nm, std, -24 dBm gmt
Vx8 Dx3 Ax2 C x1C M
9
15HP wide rack mount cards
1470...1610 nm single-mode fibre 26 dB link budget
COM – Optical Accessories Extending the capabilities of CFO OPX CWDM systems, the CWDM optical passive modules can enable a network topology in which one or more wavelengths can be added, dropped, combined, extracted or splitted on demand at specific locations along the CWDM trunk. The technology enables flexible and intelligent planning and provisioning of optical services while at the same time simplifies the deployment and maintenance of an optical network. Add/Drop – CWDM single channel add/drop units The single channel CWDM add/drop version of COM has been designed to support bi-directional add-and-drop operation. There are eight different variants available covering the ITU CWDM channels C11...C18. The bybass between common ports is wideband and includes the 1310 nm optical window as well. 3 x SC/APC 8° optical connectors.
Add/Drop unit (COM-A-A-17A-X).
ADD/DROP
IN/OUT
COMMON
COM-A-A-11A-X
One channel add/drop, ch11 (1471 nm)
COM-A-A-12A-X
One channel add/drop, ch12 (1491 nm)
COM-A-A-13A-X
One channel add/drop, ch13 (1511 nm)
COM-A-A-14A-X
One channel add/drop, ch14 (1531 nm)
COM-A-A-15A-X
One channel add/drop, ch15 (1551 nm)
COM-A-A-16A-X
One channel add/drop, ch16 (1571 nm)
COM-A-A-17A-X
One channel add/drop, ch17 (1591 nm)
COM-A-A-18A-X
One channel add/drop, ch18 (1611 nm)
5HP wide rack mount cards
Mux/Demux – CWDM multiplexer/demultiplexer units The four channel and eight channel CWDM mux/demux products have been designed for 4 or 8 wavelength operation (ITU CWDM channels C11...18). With four channel units the other part of CWDM spectrum can by-pass the unit providing a possibility to use this unit also for four channel add/drop topologies. A parallel operation with a legacy system is enabled by using a dedicated tap for 1310 nm bybassing. SC/APC 8° optical connectors.
Four & eight channel mux/demux units.
10
ch11 ch12 ch13 ch14 ch15-18 1310nm
COM-A-B-21A
ch11 ch12 ch13 ch14 ch15 ch16 ch17 ch18 1310nm
COM-A-C-51A
COM
COM
COM-A-B-21A-X
Four channel mux/demux, ch11/12/13/14 (+ ch15-18 + 1310 nm)
COM-A-B-25A-X
Four channel mux/demux, ch15/16/17/18 (+ ch11-14 + 1310 nm)
COM-A-C-51A-X
Eight channel mux/demux, ch11/12/13/14/15/16/17/18 (+ 1310 nm)
5HP wide rack mount cards
10HP wide rack mount cards
COR – Optical repeaters Non-generative optical repeaters provide a cost effective way to cover extreme transmission distances over optical fibre (CWDM wavelength specific). A typical repeater configuration supports fully bi-directional operation but has also option to be defined for uni-directional operation as well. The factory tuned COR repeaters are optically compatible with all earlier generation CFO OPX and CFOx41 series video modems. Temperature hardened (-34...+74 °C). 2 x SC/APC 8° optical connector. COR-A-RA-XXXC11A-A
Uni-directional, ch11, 26 dB
COR-A-RA-XXXC12A-B
Uni-directional, ch12, 26 dB
COR-A-RA-XXXC13A-C
Uni-directional, ch13, 26 dB
COR-A-RA-XXXC14A-D
Uni-directional, ch14, 26 dB
COR-A-RA-XXXC15A-E
Uni-directional, ch15, 26 dB
COR-A-RA-XXXC16A-F
Uni-directional, ch16, 26 dB
COR-A-RA-XXXC17A-G
Uni-directional, ch17, 26 dB
COR-A-RA-XXXC18A-H
Uni-directional, ch18, 26 dB
COR-A-RB-C11C11A-A
Bi-directional, ch11, 20 dB
COR-A-RB-C12C12A-B
Bi-directional, ch12, 20 dB
COR-A-RB-C13C13A-C
Bi-directional, ch13, 20 dB
COR-A-RB-C14C14A-D
Bi-directional, ch14, 20 dB
COR-A-RB-C15C15A-E
Bi-directional, ch15, 20 dB
COR-A-RB-C16C16A-F
Bi-directional, ch16, 20 dB
COR-A-RB-C17C17A-G
Bi-directional, ch17, 20 dB
COR-A-RB-C18C18A-H
Bi-directional, ch18, 20 dB
COR-A-RB-B22B22A-I
Bi-directional, 1310 nm, 20 dB
COR Optical repeater.
10HP wide rack mount cards
Splitters – Wideband & dual window splitters The wideband splitter variant has been designed for splitting optical signals within the channel spectrum of C11 to C18. The 1310 & 1550 nm dual window variant has a number of split ratio options and is used for standard wideband optical signals in the second and third optical window. SC/APC 8° optical connectors. COM-A-D-00A-X
Wideband splitter, 50%/50%, 1310 nm & 1460...1620 nm
COM-A-E-E7A-X
Dual window splitter, 30%/70%, 1270...1350 nm & 1510...1590 nm
COM-A-E-E5A-X
Dual window splitter, 50%/50%, 1270...1350 nm & 1510...1590 nm
5HP wide rack mount cards
Wideband optical splitter.
WDM – Wavelength division multiplexer The 1310/CWDM variant has been designed for combining an existing legacy 1310 nm system with CWDM based optical system (ch11...ch18). The 1310/1550 nm variant is for combining standard wideband optical signals in the second and third optical window into a single fibre. 3 x SC/APC 8° optical connectors. COM-A-F-F1A-X
1310/1550 nm, 1295...1325 nm /1535...1565 nm
COM-A-F-F2A-X
1310 nm/CWDM, 1260...1360 nm /1460...1620 nm
11
5HP wide rack mount cards
Wavelength division multiplexer.
CES – Eight port Fast Ethernet switches The CES is a robust eight port layer-2 Fast Ethernet switch. Installations are made easy with the MDI/MDIX and auto-polarity supported by the 10/100Base-Tx local ports. The up-link interfaces, either one or two, support optical 100Base-Fx ports. The switches have support for features such as SNMP, IGMP snooping, VLAN and STP/ RSTP/FRNT for redundant ring topologies. Standard CFO card format is suitable for rack and stand-alone installation. Temperature hardened (-34...+74 °C). 6 x RJ-45 local connectors and 1 or 2 x LC optical up-link connector. CES Fast Ethernet switch.
CES-A-H-F**A-F**-A
Managed switch with SFP optics (F** = specify SFP, see below)
CES-A-H-XXXA-XXX-A
Managed switch with without SFP optics
local ports
10HP wide rack mount cards
ports ETxx6 EFxx2 up-link
SFP Transceivers for Fast Ethernet (option classes to above) The OPX CES Fast Ethernet switches are designed for use with small form pluggable optics, which are hot-swappable. Wideband optics are feasible for temperature hardened operation (-40...+85 °C) whereas CWDM models are with a lower rating (0…+70 °C). Optical multimode network interface (dual fibre) F** = FS1 Available optical SFP transceiver types for Fast Ethernet: • 1310 nm multimode, dual fibre • 1310 nm single-mode, dual fibre • CWDM 1470...1610 nm, dual fibre • 1310 / 1550 nm and 1550 / 1310 nm single-mode, single fibre
Optical multimode 1310 nm
dual LC connector
2 km
Optical single-mode network interface (dual fibre) F** = FS2
Optical single-mode 1310 nm
dual LC connector
30 km
F** = FS3
Optical single-mode 1550 nm
dual LC connector
25 km
F** = FL2
Optical single-mode 1310 nm
dual LC connector
60 km
F** = FL3
Optical single-mode 1550 nm
dual LC connector
100 km
F** = FE3
Optical single-mode 1550 nm
dual LC connector
120 km
Optical single-mode (CWDM) network interface (dual fibre) F** = F11
CWDM 1470 nm
dual LC connector
100 km
F** = F12
CWDM 1490 nm
dual LC connector
100 km
F** = F13
CWDM 1510 nm
dual LC connector
100 km
F** = F14
CWDM 1530 nm
dual LC connector
100 km
F** = F15
CWDM 1550 nm
dual LC connector
100 km
F** = F16
CWDM 1570 nm
dual LC connector
100 km
F** = F17
CWDM 1590 nm
dual LC connector
100 km
F** = F18
CWDM 1610 nm
dual LC connector
100 km
Optical single-mode (BIDI) network interface (single fibre)
12
F** = FSA
1310 nm Tx / 1550 nm Rx
single LC connector
25 km
F** = FSB
1550 nm Tx / 1310 nm Rx
single LC connector
25 km
F** = FLA
1310 nm Tx / 1550 nm Rx
single LC connector
60 km
F** = FLB
1550 nm Tx / 1310 nm Rx
single LC connector
60 km
CES – Eight port Gigabit Ethernet switches The CES is a robust eight port layer-2 Gigabit Ethernet switch. Installations are made easy with the MDI/MDIX and auto-polarity supported by the 10/100BaseTx local ports. The up-link interfaces, either one or two, support both electrical and optical 1000Base ports, or combination of them. The switches have support for features such as SNMP, IGMP snooping, VLAN and STP/RSTP/FRNT for redundant ring topologies. Standard CFO card format is suitable for rack and standalone installation. Temperature hardened (-34...+74 °C). 6 x RJ-45 local connectors and 1 or 2 x LC optical or RJ-45 electrical up-link connector. CES-A-G-G**A-G**-A
Managed switch with SFP optics (G** = specify SFP, see below)
CES-A-G-XXXA-XXX-A
Managed switch with without SFP optics
local ports
10HP wide rack mount cards
CES Gigabit Ethernet switch.
ports ETxx6 EFxx2 up-link
SFP Transceivers for Gigabit Ethernet (option classes to above) The OPX CES Gigabit Ethernet switches are designed for use with small form pluggable optics, which are hot-swappable. Wideband optics are feasible for temperature hardened operation (-40...+85 °C) whereas electrical, multimode and CWDM models are with a lower rating (0…+70 °C). Electrical CAT5 network interface G** = GTR
Electrical CAT5 10/100/1000Base-Tx
RJ-45 female
100 m
Optical multimode network interface (dual fibre) G** = GS0
Optical multimode 850 nm
dual LC connector
550 m
G** = GS1
Optical multimode 1310 nm
dual LC connector
2 km
Optical single-mode network interface (dual fibre) G** = GS2
Optical single-mode 1310 nm
dual LC connector
10 km
G** = GS3
Optical single-mode 1550 nm
dual LC connector
30 km
G** = GL2
Optical single-mode 1310 nm
dual LC connector
30 km
G** = GL3
Optical single-mode 1550 nm
dual LC connector
50 km
G** = GE3
Optical single-mode 1550 nm
dual LC connector
70 km
G** = GU3
Optical single-mode 1550 nm
dual LC connector
110 km
Optical single-mode (BIDI) network interface (single fibre) G** = GMC
1310 nm Tx / 1490 nm Rx
single LC connector
20 km
G** = GMD
1490 nm Tx / 1310 nm Rx
single LC connector
20 km
G** = GLA
1310 nm Tx / 1550 nm Rx
single LC connector
40 km
G** = GLB
1550 nm Tx / 1310 nm Rx
single LC connector
40 km
13
Available SFP transceiver types for Gigabit Ethernet: • Electrical CAT5 • 1310 nm multimode, dual fibre • 1310 nm single-mode, dual fibre • CWDM 1470...1610 nm, dual fibre • 1310 / 1550 nm and 1550 / 1310 nm single-mode, single fibre
SFP Tranceiver Modules For optical operation some of the CFO series devices are designed to adapt with SFP (small-form pluggable) optical transceiver modules. For most typical applications the desired product configurations or combinations are available as readydefined ordering codes. For spare part use or alternative selfmade combinations the SFPs are also available as individual
product items as shown below. The available SFP portfolio is divided into two main categories; Fast Ethernet and Gigabit Ethernet transceivers. Note: CFO First Mile SFP range is compatible with the optical MSG transceivers (not electrical). SFPs are hot-swappable models.
SFP Modules for Fast Ethernet (2 x LC = dual fibre, 1 x LC = single fibre) MSF111A
Multimode 1310 nm, 11 dB
2 km (FS1), -40…+85°C, 2 x LC
MSF214A
Single-mode 1310 nm, 19 dB
30 km (FS2), -40…+85°C, 2 x LC
MSF224A
Single-mode 1550 nm, 19 dB
20 km (FS3), -40…+85°C, 2 x LC
MSF218A
Single-mode 1310 nm, 30 dB
60 km (FL2), -40…+85°C, 2 x LC
MSF228A
Single-mode 1550 nm, 30 dB
100 km (FL3), -40…+85°C, 2 x LC
MSF229A
Single-mode 1550 nm, 35 dB
120 km (FE3), -40…+85°C, 2 x LC
MSF618C
CWDM 1470 nm, 31 dB
100 km (F11), 0…+70°C, 2 x LC
MSF628C
CWDM 1490 nm, 31 dB
100 km (F12), 0…+70°C, 2 x LC
MSF638C
CWDM 1510 nm, 31 dB
100 km (F13), 0…+70°C, 2 x LC
MSF648C
CWDM 1530 nm, 31 dB
100 km (F14), 0…+70°C, 2 x LC
MSF658C
CWDM 1550 nm, 31 dB
100 km (F15), 0…+70°C, 2 x LC
MSF668C
CWDM 1570 nm, 31 dB
100 km (F16), 0…+70°C, 2 x LC
MSF678C
CWDM 1590 nm, 31 dB
100 km (F17), 0…+70°C, 2 x LC
MSF688C
CWDM 1610 nm, 31 dB
100 km (F18), 0…+70°C, 2 x LC
MSF425A
Single-mode BIDI 1310/1550 nm, 23 dB
25 km (FSA), -40…+85°C, 1 x LC
MSF435A
Single-mode BIDI 1550/1310 nm, 23 dB
25 km (FSB), -40…+85°C, 1 x LC
MSF427A
Single-mode BIDI 1310/1550 nm, 29 dB
60 km (FLA), -40…+85°C, 1 x LC
MSF437A
Single-mode BIDI 1550/1310 nm, 29 dB
60 km (FLB), -40…+85°C, 1 x LC
SFP Modules for Gigabit Ethernet (2 x LC = dual fibre, 1 x LC = single fibre)
14
MSG020C
Electrical CAT5 10/100/1000Base-T
CAT5 (GTA), 0…+70°C, 1 x RJ-45
MSG010C
Electrical CAT5 1000Base-T
CAT5 (GTR) 0…+70°C, 1 x RJ-45
MSG101B
Multimode 850 nm, 8.5 dB
550 m (GS0), -20…+85°C, 2 x LC
MSG111A
Multimode 1310 nm, 10 dB
2 km (GS1), -40…+85°C, 2 x LC
MSG211A
Single-mode 1310 nm, 10.5 dB
10 km (GS2), -40…+85°C, 2 x LC
MSG214A
Single-mode 1310 nm, 20 dB
30 km (GL2), -40…+85°C, 2 x LC
MSG222A
Single-mode 1550 nm, 12 dB
30 km (GS3), -40…+85°C, 2 x LC
MSG224A
Single-mode 1550 nm, 20 dB
50 km (GL3), -40…+85°C, 2 x LC
MSG226A
Single-mode 1550 nm, 24 dB
70 km (GE3), -40…+85°C, 2 x LC
MSG228B
Single-mode 1550 nm, 30 dB
110 km (GU3), -20…+85°C, 2 x LC
MSG301C
Single-mode BIDI 850/1310 nm, 11 dB
550 m (GSE), -0…+70°C, 1 x LC
MSG311C
Multimode BIDI 1310/850 nm, 11 dB
550 m (GSF), -0…+70°C, 1 x LC
MSG443A
Single-mode BIDI 1310/1490 nm, 15 dB
20 km (GMC), -40…+85°C, 1 x LC
MSG453A
Single-mode BIDI 1490/1310 nm, 15 dB
20 km (GMD), -40…+85°C, 1 x LC
MSG424A
Single-mode BIDI 1310/1550 nm, 20 dB
40 km (GLA), -40…+85°C, 1 x LC
MSG434A
Single-mode BIDI 1550/1310 nm, 20 dB
40 km (GLB), -40…+85°C, 1 x LC
CFO Accessories The perfect combination of accessories makes installation easier for you. Teleste offers a range of accessories that perfectly complement one to another.
This gives you the opportunity to assemble systems that perfectly reflect your individual needs.
Rack installation – Accessories for rack installation The CFO family of products all utilise the same rack installation mechanics, installation frame and power supply systems which allow mixing of single channel, multi channel, single-mode and multimode fibre applications in the same system. This provides a very flexible and reliable approach to fulfill all of your optical fibre video transmission requirements. CSR299
Installation frame package: CSR216, CPS384, CCP004, CCP042, CPC221
CSR299 UK
Installation frame package: CSR216, CPS384, CCP004, CCP042, CPC222
CSR299 US
Installation frame package: CSR216, CPS384 US, CCP004, CCP042, CPC223
CSR399
Installation frame package: CSR316, CPS384, CCP004, CCP042, CPC221
CSR399 UK
Installation frame package: CSR316, CPS384, CCP004, CCP042, CPC222
CSR399 US
Installation frame package: CSR316, CPS384 US, CCP004, CCP042, CPC223
CSR300
Installation frame package (dual PSU): CSR316, 2 x CPS384, CCP004, CCP042, 2 x CPC221
CSR300 UK
Installation frame package (dual PSU): CSR316, 2 x CPS384, CCP004, CCP042, 2 x CPC222
CSR216
Installation frame, front loading, PSU at rear
16 x 5HP card slots + 2 x PSU slots
CSR316
Installation frame, rear loading, PSU at front
16 x 5HP card slots + 2 x PSU slots
CPS384
Power supply for CSR216/316, EUR
230 VAC 130 W
CPS384 US
Power supply for CSR216/316, USA
115 VAC 130 W
CPS390
Power supply for CSR216/316
-48 VDC 102 W
CRA001
Installation shelf for 2 x CMA011
19” 1U
CPC221
Angled power cord for CPS384, EUR
CPC222
Angled power cord for CPS384, UK
CPC223
Angled power cord for CPS384, USA
CCP004
Cover plate, 4HP wide
To cover alarm/ controller card slot
CCP005
Cover plate, 5HP wide
To cover one 5HP wide slot
CCP020
Cover plate, 20HP wide
To cover four 5HP wide slots
CCP042
Cover plate, 42HP wide
To cover reserve PSU CPS384 slot
CVU014
Ventilation frame and cable management shelf
CFU014
Triple cooling fan tray, 230 VAC
CCU001
Open collector alarm / controller card
CCU002
Floating relay output alarm card
15
CSR216 Installation frame with CPS384 power supply and CCP042 cover plate.
CPS384 Power supply unit.
CFU014 Triple cooling fan tray.
CVU014 Ventilation frame.
Length 2.0 m
CCP004, 005 and 020 cover plates.
1U 19” 4HP wide rack mount card
CRA001 Installation shelf.
Stand-alone installation – Accessories for stand-alone installation The CFO family of products all utilise the same rack installation mechanics, installation frame and power supply systems which allow mixing of one channel, multi channel, single-mode and multimode fibre applications in the same system. This provides a very flexible and reliable approach to fulfill all of your optical fibre video transmission requirements. CMA011 module adapter.
CMA025 & CMA035 module adapters.
CMA011
Module adapter for wall mounting
For 1 x 5HP wide card
CMA025
Module adapter for wall mounting
CMA035
Module adapter for wall mounting
CPS251
12V mains adapter for CMA025/035, EUR
230 VAC - 12 VDC / 3.3 A
CPS252
12V mains adapter for CMA025/035, UK
230 VAC - 12 VDC / 3.3 A
CPS253
12V mains adapter for CMA025/035, USA
115 VAC - 12 VDC / 3.3 A
CIK001
DIN rail mounting kit for CPT101/321/331/521/541
Including angled-BNC adapter for video
CIK002
Rear mounting kit for CMA025/035 module adapters
For 1 x 10HP wide card (or 2 x 5HP) For 1 x 15HP wide card (or 3 x 5HP)
CLP line protection modules – Overvoltage protection and mains hum suppression
CIK002 rear mounting plate.
CLP line protection modules are meant for stand-alone CFO installations on sites where is a clear need for overvoltage protection (lightning) and mains hum (50 Hz and harmonics) suppression. CLP series units are designed to be attached over a CMA025/035 series standalone adapter and several units can be bundled over each other. Therefore alternative module combinations can be provided for either single channel, 4-channel or even 8- channel video modem operation. All connection cables needed between video modem and CLP unit(s) are included in the package. All the wires/ cables needed between external devices and CLP units can be easily connected to blocks of screw terminal connectors at the top of the unit. For camera/ video connections units are provided with isolated BNC connectors. Temperature hardened (-34...+74 °C). CLP000
CLP/CMA mounting adapter for old CMAs
For installation over old CMA021/031
CLP001
One channel video coil and line protection unit, cables included
For CRT161/191
CLP002
Line protection unit, cables included
CLP003 CLP004
Four channel video coil unit, channels 1...4, cables included Four channel video coil unit, channels 5...8, cables included
For CRT432/461/491 & CRT861/891 For CRT432/461/491 & CRT861/891 For CRT861/891
CLP001 line protection unit & CLP003 four channel video coil unit. Optical switch – 1 x 2 type non-latching switch Optical switches are used to re-direct the optical transmission streams in case of link loss as for example. The optical bandpass of the unit covers all common CWDM wavelenghts and supports the 1310 nm window as well. Naturally fully bi-directional optical operation is allowed. When COM optical switch is used in conjunction with CFOx61/x91 or CEV range video modems the optical switching can be automatic when it is controlled by the Link Loss Alarm available from these video modems. Alternatively the optical switch can be configured to operate in case of system power loss or to have remotely controlled switching by means of an external I/O control. Temperature hardened (-34...+74 °C). 3 x SC/APC 8° optical connector. Optical switch (COM-A-G-G1A).
COM-A-G-G1A
1 x 2 type non-latching switch for single-mode fibre
5HP wide rack mount card
CRX918 – Contact closure multiplexer/demultiplexer CRX918 provides a multipart operation for simple I/O applications. 8 contact closure channels are converted to RS232 serial data for transmission over any suitable CFO fibre link. Two way operation. CRX918 CRX918 CC mux/demux. 16
Cc mux/demux, 8 channel contact closure converter to RS232
5HP wide rack mount card
Multimode Fibre Patch Cords and Accessories Fiber patch cords for fibre terminals, with connectors pre-installed on both ends, for CFO multimode fibre (MMF) optic systems. OPS122
2 x LC/UPC–SC/PC patch cord with splitter, 850 & 1310nm
OPUS1EDD0200I
SC/PC–SC/PC patch cord, 2.0m, for CFO331 usage
OPUS1EPP0200IA
ST–ST MMF patch cord, 2.0m, CFO100/121 & 321 usage
OPUS1EDN0200DA
Dual SC/PC–LC/UPC patch cord, 2.0m
OPUS1ENN0200DA
Dual LC/UPC – LC/UPC patch cord, 2.0m
COW121
Optical WDM 1:2, 850 & 1310nm, ST fibre patch cords, 50cm, Cylinder package
Singlemode Fibre Patch Cords and Accessories
COW121 multimode WDM splitter.
OPA101 SC/APC – SC/APC adapter.
Fiber patch cords for fibre terminals, with connectors pre-installed on both ends, for CFO singlemode fibre (SMF) optic systems. OPA101
SC/APC–SC/APC adapter for cable extensions
OPA112
SC/APC–SC/APC patch cord, 2.0m
OPA122
SC/APC–FC/PC patch cord, 2.0m
OPA132
SC/APC–LC/UPC patch cord 2,0m
OPS132
2 x LC/UPC–SC/APC patch cord with splitter, 1310nm & CWDM
OPT211
FC/PC–FC/PC patch cord, 2,0m, for old CFO units with FC/PC-optics
244515
SC/APC–SC/APC patch cord, 5.0m
244506
SC/APC–SC/UPC patch cord, 2.0m
244523
SC/APC–SC/UPC patch cord, 5.0m
244560
SC/UPC–SC/UPC patch cord, 2.0m
244558
SC/UPC–SC/UPC patch cord, 5.0m
244579
SC/UPC–LC/UPC patch cord, 2.0m
244637
SC/UPC–LC/UPC patch cord, 5.0m
244620
Dual SC/UPC–LC/UPC patch cord, 2.0m
244625
Dual SC/UPC–LC/UPC patch cord, 5.0m
244631
Dual LC/UPC–LC/UPC patch cord, 2.0m
244633
Dual LC/UPC–LC/UPC patch cord, 5.0m
240035
Optical attenuator, SC/APC, 2dB ±15%, plug-in type
240031
Optical attenuator, SC/APC, 5dB ±15%, plug-in type
240036
Optical attenuator, SC/APC, 7dB ±10%, plug-in type
240032
Optical attenuator, SC/APC, 10dB ±15%, plug-in type
240033
Optical attenuator, SC/APC, 15dB ±15%, plug-in type
Connection cables Video, data, audio and management cables for CFO fibre optic systems. CIC301
Video cable (RGD179), BNC (male) – BNC (male)
Length 19.5cm
CIC303
Video cable (RGD179), BNC (male) – BNC (male)
Length 0.5m
CIC505
Management interface adapter for CFOx61/x91 series and OPX CEV range
RJ45m -> D9m / RJ45F
CIC603
Data cable, RJ45 – Open wires
Length 2.0m
CIC604
Data cable for CRX918 use only, RJ45 – RJ45
Length 1.0m
CIC702
CAT5 cable, direct connected, RJ45 – RJ45
Length 0.2m
CIC705
CAT5 cable, direct connected, RJ45 – RJ45
Length 0.5m
CIC707
CAT5 cable, direct connected, RJ45 – RJ45
Length 0.7m
CIC720
CAT5 cable, direct connected, RJ45 – RJ45
Length 2.0m
CIC750
CAT5 cable, direct connected, RJ45 – RJ45
Length 7.0m
17
OPS132 patch caple/splitter.
CFO OPX point-to-point system
PTZ Audio
CEV 8 Ch (RX Ch11) (1470nm)
CEV 8 Ch (TX Ch12) (1490nm)
CEV 8 Ch (RX Ch12) (1490nm)
CEV 8 Ch (TX Ch13) (1510nm)
CEV 8 Ch (RX Ch13) (1510nm)
CEV 8 Ch (TX Ch14) (1530nm)
CEV 8 Ch (RX Ch14) (1530nm) 8 CHANNEL
Remote CTRL IP devices
8x Mon
CEV 8 Ch (TX Ch15) (1550nm)
56 x Mon PTZ
8 CHANNEL
MUX/DEMUX
Video Matrix Keyboard & Joystick Control
56 x Cam
CEV 8 Ch (TX Ch11) (1470nm)
MUX/DEMUX
CEV 8 Ch (RX Ch15) (1550nm)
CEV 8 Ch (TX Ch16) (1570nm)
CEV 8 Ch (RX Ch16) (1570nm)
CEV 8 Ch (TX Ch17) (1590nm)
CEV 8 Ch (RX Ch17) (1590nm)
CEV 8 Ch (RX Ch18) (1610nm)
CEV 8 Ch (TX Ch18) (1610nm)
Any other 1310nm system
Audio Remote CTRL DVR IP devices
8x Video
Any other 1310nm system
CFO OPX add-drop system 8x Video
CRT861 (1310nm)
Data Audio
Remote Audio CTRL
8x Cam PTZ
CEV 8 Ch (TX Ch11) (1470nm)
CEV 8 Ch (TX Ch15) (1550nm)
Audio 16 x Cam
CEV 8 Ch (TX Ch12) (1490nm)
PTZ Audio Remote CTRL IP devices
CEV 8 Ch (TX Ch13) (1510nm)
Ethernet Switch (1530nm)
8x Mon Data Audio
CRR861 (1310nm)
4 Ch MUX/ DEMUX
ADD/ DROP
PTZ
16 x Cam
CEV 8 Ch (TX Ch16) (1570nm)
ADD/ DROP
EASI MP-X Encoders
4 Ch (RX Ch17) (1590nm)
ADD/ DROP
CEV 8 Ch (RX Ch11) (1470nm) 4x Mon
Data
Audio CEV 8 Ch (RX Ch12) (1490nm)
4 Ch (RX Ch18) (1610nm)
ADD/ DROP
CEV 8 Ch (RX Ch13) (1510nm)
8 Ch MUX/ DEMUX
Ethernet Switch (1530nm) CEV 8 Ch (RX Ch15) (1550nm)
Video Matrix Keyboard & Joystick Control
IP device
40 x Mon PTZ Audio Remote CTRL
CEV 8 Ch (RX Ch16) (1570nm)
IP devices
CEV 4 Ch (TX Ch17) (1590nm)
EASI MP-X Decoders
CEV 4 Ch (TX Ch18) (1610nm)
4x Video Data Audio
18
CFO product overview
Video Camera channels type
Fibre type
Distance (max)
Product name
Features
CFO First Mile Products 1 (3*)
Fixed
MMF
6.5 km
CFO100 —> Video only (CFO103*)
1
PTZ
MMF
3.5 km
CFO121 <—> 3 x data, 2 x audio, 1 x contact closure
1
PTZ
MMF
5 km
1
PTZ
SMF
50 km
CFO161 <—> 3 x data, 2 x audio, 1 x contact closure, 1 x Fast Ethernet Bridge, SNMP
1
PTZ
SMF
60 km
CFO191 <—> 3 x data, 2 x audio, 1 x contact closure, 1 x Fast Ethernet Bridge, SNMP
1
PTZ
SMF
60 km
CFO541 <—> 1 x data, 1 x contact closure
4
Fixed
MMF SMF
2 km 20/40 km
CFO410 —> 4 x video only, SFP optics
4
PTZ
MMF SMF
2 km 20/40 km
CFO420 —> 4 x video, 1 x data, SFP optics
4
PTZ
MMF (x 2)
1.5 km
CFO432 <—> 3 x data, 2 x audio, 1 x contact closure, 1 x Fast Ethernet Bridge, SNMP
4
PTZ
SMF
50 km
CFO461 <—> 3 x data, 2 x audio, 1 x contact closure, 1 x Fast Ethernet Bridge, SNMP
4
PTZ
SMF
60 km
CFO491 <—> 3 x data, 2 x audio, 1 x contact closure, 1 x Fast Ethernet Bridge, SNMP
8
Fixed
MMF SMF
2 km 20/40 km
CFO810 —> 8 x video only, SFP optics
PTZ
MMF SMF
2 km 20/40 km
CFO820 —> 8 x video, 1 x data, SFP optics
8
PTZ
SMF
50 km
CFO861 <—> 3 x data, 2 x audio, 1 x contact closure, 1 x Fast Ethernet Bridge, SNMP
8
PTZ
SMF
60 km
CFO891 <—> 3 x data, 2 x audio, 1 x contact closure, 1 x Fast Ethernet Bridge, SNMP
Fixed or PTZ
SMF (CWDM)
~200 km*
8
CFO331 <—> 1 x data, 1 x contact closure
CFO OPX 4...72
OPX
—> Number of data/audio/contact closure channels <—> Number of data/audio/contact closure/Fast Ethernet channels, SNMP
* by using optical repeators
CFO Accessories • CES series Fast and Gigabit Ethernet switches together with a selection of various SFP optics (MMF, SMF) • CRX918 digital multiplexer for contact closure transmission • COR series optical repeaters for long haul CWDM & 1310 nm operation • COM series optical switch for various redundancy and re-routing requirements • CLP line protection modules for CFO stand-alone installations which provides overvoltage protection and mains hum suppression • Various active and passive components to support fluent installation and system operation either for rack mount or stand-alone settings
19
Contacts – Teleste Video Networks Finland, Turku Teleste Headquarters Sales Nordic, Baltic & Russia Tel. +358 2 2605 611 Fax. +358 2 2605 880
France, Paris Teleste SAS Sales France, Spain, Portugal & Italy Tel. +33 1 5593 4414 Fax. +33 1 5593 1416
Sweden, Täby Teleste Sweden AB Sales Scandinavia Tel. +46 8 710 21 90 Fax. +46 8 622 68 61
Poland, Krakow Teleste Video Networks Sp. Z o.o Sales CEE Tel. +48 12 623 03 70 Fax. +48 12 626 74 41
United Kingdom, Peterborough Teleste UK Sales UK, Greece, Turkey, Middle East & Africa Tel. +44 1832 274 838
USA, Georgetown TX Teleste LLC Sales US & Americas Tel. +1 51 2868 2009 Fax. +1 51 2868 8112 Australia, Queensland Teleste Australia Sales APAC Tel. +61 7 3890 0499 Fax. +61 7 3890 5988
Teleste Video Networks Postal address P.O.Box 323, FI-20101 Turku, Finland Visiting address Seponkatu 1, FI-20660 Littoinen, Finland Phone +358 (0)2 2605 611 Fax +358 (0)2 2605 808 E-mail
[email protected] www.teleste.com
P5P_CFO 26.07.2011
Germany, Hildesheim Teleste Germany Sales Germany, Austria, Switzerland Tel. +49 5034 879 332 Fax. +49 5034 879 331
