Transcript
Available MPX products
IP edge devices
Valid August 1st 2013
Right Picture. Right Place. Right Time.®
Contents
MPX video networking introduction
MPX video networking introduction . . . . . . . . 2
The MPX product family offers all the components needed in networked digital video systems for high performance video security system.
D1/4CIF 25/30fps Video Encoders . . . . . . . 3-8 MPH101/111 . . . . . . . . . . . . . . . . . . . . . . . . MPH102/112 . . . . . . . . . . . . . . . . . . . . . . . . MPH241 . . . . . . . . . . . . . . . . . . . . . . . . . . . . MPH242 . . . . . . . . . . . . . . . . . . . . . . . . . . . . MPH401/411 . . . . . . . . . . . . . . . . . . . . . . . . MPH402/412 . . . . . . . . . . . . . . . . . . . . . . . . MPC-E1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . MPC-EZ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . MPZ111 Rackmount . . . . . . . . . . . . . . . . . . MPX-E8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3 3 4 4 5 5 6 6 7 8
½ D1/4CIF 25/30fps Video Encoders . . . . 9-10 MPC-E2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 MPC-E4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 MPX-E8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 D1/4CIF 25/30fps Video Decoders . . . 11-12 MPC-D1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . MPC-D2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . MPC-D4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . MPX-D8 . . . . . . . . . . . . . . . . . . . . . . . . . . . .
11 11 12 12
H.264/MJPEG basic video codecs . . . . . . . 13 MCC101 . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 MCC201 . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 MCC104 . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 SFP Transceiver options for MPX/MPC . . . 14
MPX family consists of the MPH, MPC and MPX series of networking devices. The MPX family is scalable from simple point-to-point fibre based systems to large scale distributed IP video network systems with full management for switching, control and security. The MPX products are relying on industry standards; hence they can be deployed in any standards based system. Encoders provide H.264, MPEG-4, MJPEG and MPEG-2 video compression with full resolution and full frame rate for PAL and NTSC video signals. Number of high quality audio channels, EIA RS type data channels and contact closure channels are also supported. Fast Ethernet network interface supports open standard twisted pair (RJ-45) and multimode or singlemode fibre optic ports. MPX family of encoders, decoders and Ethernet switches are designed for use with small form pluggable optics (SFP). The squeeze-and-pull mechanism makes it easy to install SFP transceivers and remove them. For optical requirement specification please refer to our selection of suitable SFP transceivers. SFP transceivers can be ordered separately. For MPX and MPC products SFP’s can also be ordered as part of the product configuration. Most of the MPX devices are feasible for temperature hardened operation (-34...+74 °C / -29...165 °F). In-band management control (WebUI).
Fast Ethernet SFP options . . . . . . . . . . . . 14 MES Managed Ethernet Switches . . . . . . . . . 15
The MPX family is compatible with Teleste VMX and S-VMX video management system.
MES106 . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 MES110 . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 MES210 . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 MPX Accessories . . . . . . . . . . . . . . . . . . . . 16-20 Accessories for rack installation . . . . . . . . Accessories for stand-alone installation . . Connection cables . . . . . . . . . . . . . . . . . . . SFP transceiver modules . . . . . . . . . . . . . .
16 16 17 18
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . 21-23
Copyright © 2013 Teleste Corporation. All rights reserved. TELESTE is a registered trademark of Teleste Corporation. 2
Contents & Introduction
Available MPX products 08/2013
D1/4CIF 25/30fps Video Encoders MPH100 series video encoder provides transmission of one or two full frame rate and full resolution video channels, bi-directional EIA-RS232 (1) and EIA-RS422/485 (1) data channels, and contact closure channels (2 in, 1 out) over Fast Ethernet network (GigE is an option).
Available in stand-alone unit. Temperature hardened (-34...+74 °C / -29...165 °F). Optical connector LC (SFP). DIN rail mounting kits (MAC003 & MAC004) available as options. A +12 V supply voltage is provided by a CPS25x series power supply.
Supported video encoding formats are H.264, MJPEG, MPEG-2 & MPEG-4, or any combination of these. MPH101/111
1 Channel stand-alone video encoder MPH101
Electrical RJ-45 network interface
ONVIF configuration interface
MPH111
Optical interface, SFP support
ONVIF configuration interface
MPH102/112
2 Channel stand-alone video encoder MPH102
Electrical RJ-45 network interface
ONVIF configuration interface
MPH112
Optical interface, SFP support
ONVIF configuration interface
MPH101 MPH Licences
Dx2 C x2C Ex1 MPH100 series encoders are – compliant products.
MLH242
Network interface upgrade to Gigabit Ethernet
MLH251
Support for PoE
MLH321
MPEG-2 licence for MPH101 & MPH111 (1 channel MPH encoder)
MLH322
MPEG-2 licence for MPH102 & MPH112 (2 channel MPH encoder)
MLH331
MPEG-4 licence for MPH101 & MPH111 (1 channel MPH encoder)
MLH332
MPEG-4 licence for 2MPH102 & MPH112 (2 channel MPH encoder)
MLH371
Support for SNMP configuration interface (Alternative to ONVIF)
MLH391
Support for RSVP protocol
MPH Services (Refer to services price list) MSH001
D1/4CIF 25/30fps Video Encoders
Configuration service
Unit specific settings at factory
3
Available MPX products 08/2013
MPH200 series video encoders provide high quality encoding and managed gigabit Ethernet edge switch in the same unit.
This enables connectivity to any HD or megapixel camera with HD-SDI digital output.
The video encoder provides transmission of one or two full frame rate and full resolution video channels, bi-directional EIA-RS232 (1) and EIA-RS422/485 (1) data channels, high quality audio channels (2) and contact closure channels (2 in, 1 out) over Gigabit Ethernet network.
Supported audio codecs are G.711, G.726, AAC-LC & AAC-HE.
Supported video encoding formats for standard definition TV subject to active licences are H.264, MJPEG, MPEG-2 & MPEG-4, or any combination of these. MPH241 has an option for High Definition video. By activating a licence the BNC input is switched to HD-SDI mode.
The 4-port gigabit Ethernet switch has two 10/100/1000Base-T ports and two 1000Base-X SFP ports with support for multicast snooping (IGMP) and redundant network protocol (RSTP). Available in stand-alone unit. Temperature hardened (-34...+74 °C / -29...165 °F). Optical connector LC (SFP). DIN rail mounting kits (MAC005 & MAC006) available as options. A +12 V supply voltage is provided by a CPS25x series power supply.
MPH241
1 Channel stand-alone video encoder
MPH241
Electrical RJ-45 network interface with built-in Gigabit Ethernet switch
ONVIF configuration interface
Full HD option, 2 x 10/100/1000Base-TX, 2 x 1000Base-FX ports (optional SFP required)
MPH242
MPH241 Optional 1080p HDTV support through HD-SDI is available for MPH241.
Dx2 A x2 C x2C Ex4 MPH200 series encoders are – compliant products.
2 Channel stand-alone video encoder
MPH242
Electrical RJ-45 network interface with built-in Gigabit Ethernet switc
ONVIF configuration interface
2 x 10/100/1000Base-TX, 2 x 1000Base-FX ports (optional SFP required)
MPH Licences MLH251
Support for PoE
MLH213
High Definition (HDTV) encoding licence, activates HD-SDI input
MLH321
MPEG-2 licence for MPH241 (1 channel MPH encoder)
MLH322
MPEG-2 licence for MPH242 (2 channel MPH encoder)
MLH331
MPEG-4 licence for MPH241 (1 channel MPH encoder)
MLH332
MPEG-4 licence for for MPH242 (2 channel MPH encoder)
MLH341
AAC-HE audio codec licence
MLH371
Support for SNMP configuration interface (Alternative to ONVIF)
MLH391
Support for RSVP protocol
MPH Services (Refer to services price list) MSH001
4
Configuration service
Unit specific settings at factory
D1/4CIF 25/30fps Video Encoders
Available MPX products 08/2013
MPH400 series video encoder provides transmission of one or two full frame rate and full resolution video channels, bi-directional EIA-RS232 (1) and EIA-RS422/485 (1) data channels, and contact closure channels (2 in, 1 out) over Fast Ethernet network (GigE is an option).
Available in rack-mount, 3U high size units. Operating temperature range is -10...+60 °C / 14...140 °F. Optical connector LC (SFP). 19” Installation frame MSR416 supports up to 16 modules. Powering is provided by a MPS12x series power supply.
Supported video encoding formats are H.264, MJPEG, MPEG-2 & MPEG-4, or any combination of these. MPH401/411
1 Channel rack mounted video encoder MPH401
Electrical RJ-45 network interface
ONVIF configuration interface
MPH411
Optical interface, SFP support
ONVIF configuration interface
MPH402/412
2 Channel rack mounted video encoder
MPH402
MPH402
Electrical RJ-45 network interface
ONVIF configuration interface
MPH412
Optical interface, SFP support
ONVIF configuration interface
MPH Licences
Dx2 C x2 Ex1
MLH242
Network interface upgrade to Gigabit Ethernet
MLH321
MPEG-2 licence MPH401 & MPH411 (1 channel encoder)
MPH400 series encoders are – compliant products.
MLH322
MPEG-2 licence for MPH402 & MPH412 (2 channel encoder)
MLH331
MPEG-4 licence for MPH401 & MPH411 (1 channel encoder)
MLH332
MPEG-4 licence for MPH402, MPH412 (2 channel encoder)
MLH371
Support for SNMP configuration interface (Alternative to ONVIF)
MLH391
Support for RSVP protocol
C
MPH Services (Refer to services price list) MSH001
D1/4CIF 25/30fps Video Encoders
Configuration service
Unit specific settings at factory
5
Available MPX products 08/2013
The MPC-E1 video encoder provides transmission of full frame rate and full resolution video channel (1), bi-directional EIA-RS232/422/485 data channels (2), high quality audio channels (2) and contact closure channel (1) over Fast Ethernet network.
Available in stand-alone unit. Temperature hardened (-34...+74 °C / -29...165 °F). Optical connector LC (SFP). DIN rail mounting kits (MAC001 & MAC002) available as options. A +12 V supply voltage is provided by a CPS25x series power supply.
There is also a more feature rich version available equipped with three contact closure channels and a complementary bridging Ethernet interface. MPC-E1
Electrical CAT5 network interface – RJ-45 connector E1JD-FTRXXX-X-E1
E1JD-FTRXXX-X-E1
MPEG-4/MJPEG
60 x 130 x 130 mm
E1JD-FTRXXX-X-E2
MPEG-2/MPEG-4/MJPEG
60 x 130 x 130 mm
Electrical CAT5 model with 3 x CC & complementary Ethernet interface
Dx2 Ax2 C x1C ETxx1
EALF-FTRXXX-X-E1
MPEG-4/MJPEG
80 x 130 x 130 mm
EALF-FTRXXX-X-E2
MPEG-2/MPEG-4/MJPEG
80 x 130 x 130 mm
Optical SFP network interface – LC connector (SFP module not included), F** = specify SFP
Dx2 Ax2 C x3 Ex2 C
Tx
E1KD-F**XXX-X-E1
MPEG-4/MJPEG
60 x 130 x 130 mm
E1KD-F**XXX-X-E2
MPEG-2/MPEG-4/MJPEG
60 x 130 x 130 mm
Optical SFP model with 3 x CC & complementary Ethernet interface, F** = specify SFP
Dx2 Ax2 C x1C EFxx1
Dx2 Ax2 C x3 Ex1 Ex1 C
Fx
Tx
EAMF-F**XXX-X-E1
MPEG-4/MJPEG
80 x 130 x 130 mm
EAMF-F**XXX-X-E2
MPEG-2/MPEG-4/MJPEG
80 x 130 x 130 mm
MPEG-2 software licence MLC201
The MPC-EZ video encoder provides transmission of full frame rate and full resolution video channels (2), bi-directional EIA-RS232/422/485 data channels (2), high quality audio channels (2) and contact closure channels (2) over Fast Ethernet network.
1 channel MPEG-2 licence for MPC-E1 encoder
DIN rail mounting kits (MAC001 & MAC002) available as options. A +12 V supply voltage is provided by a CPS25x series power supply.DIN rail mounting kits (MAC001 & MAC002) available as options. A +12 V supply voltage is provided by a CPS25x series power supply.
Available in stand-alone unit. Temperature hardened (-34...+74 °C / -29...165 °F). Optical connector LC (SFP). MPC-EZ
Electrical CAT5 network interface – RJ-45 connector
EZPJ-FTRXXX-X-E1
EZPJ-FTRXXX-X-E1
MPEG-4/MJPEG
80 x 130 x 130 mm
EZPJ-FTRXXX-X-E2
MPEG-2/MPEG-4/MJPEG
80 x 130 x 130 mm
Optical SFP network interface – LC connector (SFP module not included), F** = specify SFP
Dx2 Ax4 C x2C ETxx1 Dx2 Ax4 C x2 Ex1 C
6
Fx
EZQJ-F**XXX-X-E1
MPEG-4/MJPEG
80 x 130 x 130 mm
EZQJ-F**XXX-X-E2
MPEG-2/MPEG-4/MJPEG
80 x 130 x 130 mm
MPEG-2 software licence MLC202
2 channel MPEG-2 licence for MPC-EZ encoder D1/4CIF 25/30fps Video Encoders
Available MPX products 08/2013
The MPZ range of rackmount video encoders consist of one to three single channel (MPC-E1) or dual channel (MPC-EZ) encoders mounted into a 2U high 19” wide face plate. This allows for 19” installation into e.g. roadside cabinets, where the space is limited.
directional EIA-RS232/422/485 data channel, contact closure channel and high quality audio channel per each video input.
The MPZ video encoder comes in form of one, two, four and six full frame rate full resolution video channels including bi-
+12 V supply voltage is provided by CPS25x series power supplies (one per encoder).
Available in 19” wide, 2U high units. Temperature hardened (-34...+74 °C / -29...165 °F).
MPZ111 Rackmount
MPZ111 Rack mechanic
Electrical CAT5 network interface – RJ-45 connector
Dx2 Ax2 C x1 Ex1 C
Tx
MPZ111
1 x MPEG-4/MJPEG
19” wide, 2U high
MPZ111E2 Rackmount
Dx2 Ax2 C x1 Ex1 C
Tx
Electrical CAT5 network interface – RJ-45 connector MPZ111E2
1 x MPEG-4/MPEG-2/MJPEG
19” wide, 2U high
MPZ212 Rackmount
Dx2 Ax4 C x2 Ex1 C
Tx
Electrical CAT5 network interface – RJ-45 connector MPZ212
2 x MPEG-4/MJPEG
19” wide, 2U high
MPZ214 Rackmount
Dx2 Ax4 C x2 Ex1 C
Tx
Electrical CAT5 network interface – RJ-45 connectors (2) MPZ214
4 x MPEG-4/MJPEG
19” wide, 2U high
MPZ216 Rackmount
Dx2 Ax4 C x2 Ex1 C
Tx
D1/4CIF 25/30fps Video Encoders
Electrical CAT5 network interface – RJ-45 connectors (3) MPZ216
6 x MPEG-4/MJPEG
19” wide, 2U high
7
Available MPX products 08/2013
The MPX-E8 video encoder provides transmission of four full frame rate and full resolution video channels, bi-directional EIA-RS232/422/485 data channels (3), high quality audio channels (2) and complementary bridging Ethernet channel interface over Fast Ethernet network.
Available in stand-alone 19” wide, 1U high units. Temperature hardened (-34...+74 °C / -29...165 °F). Optical connector LC (SFP). A +12 V supply voltage is provided by a CPS25x series power supply.
There are also more feature rich versions available equipped with eight (8) contact closure channels or four (4) contact closure channels and eight (8) audio channels. MPX-E8
E8CA-FTR-C-E1
Dx3 Ax2 Ex2
Tx
Dx3 Ax2 C x8 Ex2 C
Tx
Dx3 Ax8 C x4C ETxx2 Dx3 Ax2 Ex1 Ex1 Tx
Fx
Dx3 Ax2 C x8 Ex1 Ex1 C
Tx
Fx
Dx3 Ax8 C x4C ETxx1 EFxx1
8
Electrical CAT5 network interface – RJ-45 connector E8C0-FTR-X-E2
MPEG-2/MPEG-4/MJPEG
19” wide, 1U high
Electrical CAT5 model with 8 x CC E8CC-FTR-B-E2
MPEG-2/MPEG-4/MJPEG
19” wide, 1U high
Electrical CAT5 model with 8 x audio & 4 x CC E8CA-FTR-C-E2
MPEG-2/MPEG-4/MJPEG
19” wide, 1U high
Optical SFP network interface – LC connector (SFP module not included), F** = specify SFP E8F0-F**-X-E2
MPEG-2/MPEG-4/MJPEG
19” wide, 1U high
Optical SFP model with 8 x CC, F** = specify SFP E8FC-F**-B-E2
MPEG-2/MPEG-4/MJPEG
19” wide, 1U high
Optical SFP model with 8 x audio & 4 x CC, F** = specify SFP E8FA-F**-C-E2
MPEG-2/MPEG-4/MJPEG
19” wide, 1U high
D1/4CIF 25/30fps Video Encoders
Available MPX products 08/2013
½ D1/2CIF 25/30fps Video Encoders The MPC-E2 video encoder provides transmission of two full frame rate video channels, bi-directional EIA-RS232/422/485 data channels (2) and high quality audio channels (2) over Fast Ethernet network. There is also a more feature rich version available equipped with three contact closure channels and a complementary bridging Ethernet interface.
Available in stand-alone unit. Temperature hardened (-34...+74 °C / -29...165 °F). Optical connector LC (SFP). DIN rail mounting kits (MAC001 & MAC002) available as options. A +12 V supply voltage is provided by a CPS25x series power supply.
MPC-E2
Electrical CAT5 network interface – RJ-45 connector E2CX-FTRXXX-X-E1
E2CX-FTRXXX-X-E1
Dx2 Ax2 ETxx1 Dx2 Ax2 C x2 Ex2 C
MPEG-4/MJPEG
60 x 130 x 130 mm
Electrical CAT5 model with 2 x CC & complementary Ethernet interface EBNB-FTRXXX-X-E1
MPEG-4/MJPEG
80 x 130 x 130 mm
Tx
Dx2 Ax2 EFxx1 Dx2 Ax2 C x2C ETxx1 EFxx1
Optical SFP network interface – LC connector (SFP module not included), F** = specify SFP E2FX-F**XXX-X-E1
MPEG-4/MJPEG
60 x 130 x 130 mm
Optical SFP model with 2 x CC & complementary Ethernet interface, F** = specify SFP EBOB-F**XXX-X-E1
The MPC-E4 video encoder provides transmission of four full frame rate video channels, bi-directional EIA-RS232/422/485 data channels (2) and high quality audio channels (4) over Fast Ethernet network.
MPEG-4/MJPEG
80 x 130 x 130 mm
DIN rail mounting kits (MAC001 & MAC002) available as options. A +12 V supply voltage is provided by a CPS25x series power supply.
Available in stand-alone unit. Temperature hardened (-34...+74 °C / -29...165 °F). Optical connector LC (SFP). MPC-E4
Electrical CAT5 network interface (RJ-45) E4DX-FTRXXX-X-E1
MPEG-4/MJPEG
80 x 130 x 130 mm
E4DX-FTRXXX-X-E1
Dx2 Ax4 ETxx1
Optical SFP network interface (LC, SFP module not included), F** = specify SFP E4EX-F**XXX-X-E1
MPEG-4/MJPEG
80 x 130 x 130 mm
Dx2 Ax4 EFxx1
½ D1/4CIF 25/30fps Video Encoders
9
Available MPX products 08/2013
The MPX-E8 video encoder provides transmission of eight full frame rate video channels on ½D1/2CIF resolution, bi-directional EIA-RS232/422/485 data channels (3), high quality audio channels (2) and complementary bridging Ethernet interface over Fast Ethernet network.
Available in stand-alone 19” wide, 1U high units. Temperature hardened (-34...+74 °C / -29...165 °F). Optical connector LC (SFP). A +12 V supply voltage is provided by a CPS25x series power supply.
There are also more feature rich versions available equipped with eight (8) contact closure channels or four (4) contact closure channels and eight (8) audio channels. MPX-E8
or
E8CA-FTR-D-E1
Dx3 Ax2 Ex2
Tx
Dx3 Ax2 C x8 Ex2 C
Tx
Dx3 Ax8 C x4 Ex2 C
Tx
Dx3 Ax2 Ex1 Ex1 Tx
Fx
Dx3 Ax2 C x8 Ex1 Ex1 C
Tx
Fx
Electrical CAT5 network interface – RJ-45 connector E8C0-FTR-X-E1
MPEG-4/MJPEG
19” wide, 1U high
Electrical CAT5 model with 8 x CC E8CC-FTR-B-E1
MPEG-4/MJPEG
19” wide, 1U high
Electrical CAT5 model with 8 x audio & 4 x CC E8CA-FTR-C-E1
MPEG-4/MJPEG
19” wide, 1U high
Optical SFP network interface – LC connector (SFP module not included), F** = specify SFP E8F0-F**-X-E1
MPEG-4/MJPEG
19” wide, 1U high
Optical SFP model with 8 x CC, F** = specify SFP E8FC-F**-B-E1
MPEG-4/MJPEG
19” wide, 1U high
Optical SFP model with 8 x audio & 4 x CC, F** = specify SFP E8FA-F**-C-E1
MPEG-4/MJPEG
19” wide, 1U high
MPEG-2 software licence MLX204
10
4 channel MPEG-2 licence for MPX-E8 encoder
½ D1/4CIF 25/30fps Video Encoders
Available MPX products 08/2013
D1/4CIF 25/30fps Video Decoders The MPC-D1 video decoder provides simultaneous reception and decoding of one full frame rate and full resolution video channel, bi-directional EIA-RS232/422/485 data channels (2), high quality audio channels (2) and contact closure channel (1) over Fast Ethernet network.
Available in stand-alone unit. Temperature hardened (-34...+74 °C / -29...165 °F). Optical connector LC (SFP). DIN rail mounting kits (MAC001 & MAC002) available as options. A +12 V supply voltage is provided by a CPS25x series power supply.
MPC-D1
Electrical CAT5 network interface – RJ-45 connector D1RH-FTRXXX-X-D1
MPEG-2/MPEG-4/MJPEG
60 x 130 x 130 mm
D1RH-FTRXXX-X-D1
Dx2 Ax2 C x1C EFxx1
Optical SFP network interface – LC connector (SFP module not included), F** = specify SFP D1TH-F**XXX-X-D1
MPEG-2/MPEG-4/MJPEG
60 x 130 x 130 mm
Dx2 Ax2 C x1C ETxx1 The MPC-D2 video decoder provides simultaneous reception and decoding of two full frame rate and full resolution video channels, bi-directional EIA-RS232/422/485 data channels (2) and high quality audio channels (2) over Fast Ethernet network.
Available in stand-alone unit. Temperature hardened (-34...+74 °C / -29...165 °F). Optical connector LC (SFP). DIN rail mounting kits (MAC001 & MAC002) available as options. A +12 V supply voltage is provided by a CPS25x series power supply.
There is also a more feature rich version available equipped with three contact closure channels and a complementary bridging Ethernet interface. MPC-D2
Electrical CAT5 network interface – RJ-45 connector D2AX-FTRXXX-X-D1
MPEG-2/MPEG-4/MJPEG
60 x 130 x 130 mm
D2AX-FTRXXX-X-D1
Dx2 Ax2 ETxx1 Dx2 Ax2 C x2C ETxx2 Dx2 Ax2 EFxx1 Dx2 Ax2 C x2 Ex1 Ex1 C
Tx
Electrical CAT5 model with 2 x CC & complementary Ethernet interface DBUB-FTRXXX-X-D1
MPEG-2/MPEG-4/MJPEG
80 x 130 x 130 mm
Optical SFP network interface – LC connector (SFP module not included), F** = specify SFP D2BX-F**XXX-X-D1
MPEG-2/MPEG-4/MJPEG
60 x 130 x 130 mm
Optical SFP model with 2 x CC & complementary Ethernet interface, F** = specify SFP DBVB-F**XXX-X-D1
MPEG-2/MPEG-4/MJPEG
80 x 130 x 130 mm
Fx
D1/4CIF 25/30fps Video Decoders
11
Available MPX products 08/2013
The MPC-D4 video decoder provides simultaneous reception and decoding of four full frame rate and full resolution video channels, bi-directional EIA-RS232/422/485 data channels (2) and high quality audio channels (4) over Fast Ethernet network.
Available in stand-alone unit. Temperature hardened (-34...+74 °C / -29...165 °F). Optical connector LC (SFP). DIN rail mounting kits (MAC001 & MAC002) available as options. A +12 V supply voltage is provided by a CPS25x series power supply.
MPC-D4
Electrical CAT5 network interface – RJ-45 connector D4GX-FTRXXX-X-D1
MPEG-2/MPEG-4/MJPEG
80 x 130 x 130 mm
D4GX-FTRXXX-X-D1 Optical SFP network interface – LC connector (SFP module not included), F** = specify SFP
Dx2 Ax4 ETxx1
D4HX-F**XXX-X-D1
MPEG-2/MPEG-4/MJPEG
80 x 130 x 130 mm
Dx2 Ax4 EFxx1 The MPX-D8 video decoder provides simultaneous reception and decoding of eight full frame rate and full resolution video channels, bi-directional EIA-RS232/422/485 data channels (3), high quality audio channels (2) and complementary bridging Ethernet interface (1) over Fast Ethernet network.
Available in stand-alone 19” wide, 1U high units. Temperature hardened (-34...+74 °C / -29...165 °F). Optical connector LC (SFP). A +12 V supply voltage is provided by a CPS25x series power supply.
There is also a more feature rich version available equipped with eight (8) contact closure channels. MPX-D8
D8CC-FTR-B-D1
D8C0-FTR-X-D1
Dx3 Ax2 C x8C ETxx2
D8CC-FTR-B-D1
Dx3 Ax2 Ex1 Ex1 Tx
Fx
Dx3 Ax2 C x8 Ex1 Ex1 C
12
Electrical CAT5 network interface – RJ-45 connector
Dx3 Ax2 Ex2
Tx
Tx
Fx
MPEG-2/MPEG-4/MJPEG
19” wide, 1U high
Electrical CAT5 model with 8 x audio & 4 x CC MPEG-2/MPEG-4/MJPEG
19” wide, 1U high
Optical SFP network interface – LC connector (SFP module not included), F** = specify SFP D8F0-F**-X-D1
MPEG-2/MPEG-4/MJPEG
19” wide, 1U high
Optical SFP model with 8 x CC, F** = specify SFP D8FC-F**-X-D1
MPEG-2/MPEG-4/MJPEG
19” wide, 1U high
D1/4CIF 25/30fps Video Decoders
Available MPX products 08/2013
H.264/MJPEG basic video codecs MCC series is an entry level H.264 codec family for basic video transmission/networking systems. The most common system configuration is to have an encoder and a decoder connected in 1-to-1 mode. Standalone units are designed for dry indoor environments and have the operational temperature range of -10…+50 deg.C. MCC101 and MCC201 can be configured for encoding or decoding purposes by the user. Dual-streaming is supported from each video input. Typical video source is a standard definition composite video. MCC201 supports full HD and have alternative selectable video interfaces for HDMI, HD/SD-SDI and composite ana-
logue video. All models have dual channel duplex audio, two serial data ports and I/O ports for sensor/alarm functions. The network interface is 10/100Base-TX with PoE ability. The device management is based on browser based WebUI with a possibility of a live stream view and PTZ control. Additional features are video motion detection and event management. Video streams and/or image snapshots can be recorded on external USB device or to FTP server, email notifications are also available. The MCC has support for SNMP and is also ONVIF compatible.
MCC101
1
H.264, MJPEG 2 25/30fps V D1/4CIF
1 Channel SD Encoder/Decoder, H.264/MJPEG, 10/100Base-TX MCC101
MCC201
MCC201
1
Dx2 A x2 C x2C Ex1
H.264, MJPEG 2 25/30fps V D1/4CIF
or
1
1080p 2 25/30fps V HD
1 Channel HD/SD Encoder/Decoder, H.264/MJPEG, 10/100Base-TX MCC201
MCC series codecs are – compliant products.
PoE, 2xAudio, 2xData, MD, universal mains adapter included
PoE, 2xAudio, 2xData, MD, universal mains adapter included
MCC104
4
H.264, MJPEG 8 25/30fps V D1/4CIF
4 Channel SD Encoder only, H.264/MJPEG, 10/100Base-TX MCC104
H.264/MJPEG basic Video Codecs
PoE, 2xAudio, 2xData, MD, universal mains adapter included
13
Available MPX products 08/2013
SFP Transceiver options for MPX/MPC The SFP (small-form pluggable) modules listed below can be used in conjunction with the MPX and MPC encoder/decoder variants that are equipped with a SFP slot.
SFP wideband optics (1310 & 1550 nm) are feasible for temperature hardened operation (-40…+85 °C), CWDM optics are for +5...+85 °C.
Fast Ethernet SFP options for MPC and MPX configurations
SFP MPX, MPC Optical multimode network interface (dual fibre) MPX Fast Ethernet products (MPC and MPX encoders/ decoders) are designed for use with small form pluggable optics.
Note! MPH encoders use different SFPs.
F** = FS1
Optical multimode 1310nm
dual LC connector
2km
Optical single-mode network interface (dual fibre) F** = FS2
Optical single-mode 1310nm
dual LC connector
30km
F** = FS3
Optical single-mode 1550nm
dual LC connector
25km
F** = FL2
Optical single-mode 1310nm
dual LC connector
60km
F** = FL3
Optical single-mode 1550nm
dual LC connector
100km
F** = FE3
Optical single-mode 1550nm
dual LC connector
120km
Optical single-mode (CWDM) network interface (dual fibre)
2 fibre version
Tx
Rx
2 x LC = dual fibre, 1 x LC = single fibre.
14
1 fibre version
Tx/Rx
F** = F11
CWDM 1470nm
dual LC connector
100km
F** = F12
CWDM 1490nm
dual LC connector
100km
F** = F13
CWDM 1510nm
dual LC connector
100km
F** = F14
CWDM 1530nm
dual LC connector
100km
F** = F15
CWDM 1550nm
dual LC connector
100km
F** = F16
CWDM 1570nm
dual LC connector
100km
F** = F17
CWDM 1590nm
dual LC connector
100km
F** = F18
CWDM 1610nm
dual LC connector
100km
Optical single-mode (BIDI) network interface (dual fibre) F** = FSA
1310nm Tx / 1550nm Rx
single LC connector
25km
F** = FSB
1550nm Tx / 1310nm Rx
single LC connector
25km
F** = FLA
1310nm Tx / 1550nm Rx
single LC connector
60km
F** = FLB
1550nm Tx / 1310nm Rx
single LC connector
60km
SFP Transceiver options
Available MPX products 08/2013
MES Managed Ethernet Switches MES series is completely new line of managed Ethernet switches for video networking applications. The electrical local Fast Ethernet ports support full wire speed. Switches have two uplink ports to cater either FE or GigE level SFP transceiver module. Suitable SFP modules are available from the MWF and MWG series (see page 18-19). Cabling installations are made easy with the MDI/MDIX, auto-polarity and auto-mode supported 10/100Base-TX local ports. The up-link interfaces, either one or two, support optical 100Base-FX or 1000Base-FX small form pluggable transceivers (auto-recognition). MES switches have support for features such as IGMP snooping, multiple VLAN features, QoS and security functions and a high network resiliency based on STP/RSTP/ FRNT protocols. Versatile management is covered by WebUI
(HTTP or HTTPS) and SNMP. Syslog operation is securing log files and remote syslog server features. In addition the MES series offers also a router version with L2/L3-switching capability. Available in a robust and compact standalone units. Temperature hardened for -40…+70 °C. operation. Very low power consumption, no active cooling required. Superior EMC and mechanical characteristics to meet harsh industrial, transportation and rail environments. Default installation support to DIN rails. A wall mount kit available as option (MAC007). Dual supply voltage input (redundant) for 24 VDC. Optional mains adapter CPS45x can be used for typical installations. An industrial graded PSU is available on request.
MES106
6
E
6-Port Managed L2 Switch - Compact Local FE CAT5 (4), Uplink FE/GE (2), SFPs not included
MES110
10
MES110
Local ports (10/100 TX)
Local ports (10/100 TX)
Ex4 Ex2 Tx
SFP
Uplink ports (100/1000 FX)
Ex8x Ex2 Uplink ports T
SFP
(100/1000 FX)
E
10-Port Managed L2 Switch - Compact Local FE CAT5 (8), Uplink FE/GE (2), SFPs not included
MES210
10
E
10-Port Managed L3 Switch/Router - Compact Local FE CAT5 (8), Uplink FE/GE (2), SFPs not included
MES Managed Ethernet Switches
15
Available MPX products 08/2013
MPX Accessories The perfect combination of accessories makes installation easier for you. Teleste offers a range of accessories that perfectly complement one to another. This gives you the
opportunity to assemble systems that perfectly reflect your individual needs.
MPH Rack installation – Accessories for rack installation MSR416
Installation frame, front loading, PSU at rear
MPS120 MSR419 Installation frame for MPH400 devices.
MPS121 MPS122
230VAC / 120W, without mains cable Power Supply for MSR416
MPS123
230VAC / 120W, EU mains cable 230VAC / 120W, UK mains cable 115VAC / 120W, US mains cable
CPC521
EU plug, 2m IEC power cord for MPS12x with locking
UK plug, 2m
MCP401
Cover plate for MSR416
To cover one unit wide slot
MCP404
Cover plate for MSR416
To cover four unit wide slot
CPC522 CPC523
MPS12x Power supply for MSR419 installation frame.
16 x MPH400 series modules
US plug, 2m
Ventilation units CVU014
Passive ventilation frame and cable management
19” 1U
CVU014 Ventilation frame. Stand-alone installation – Accessories for stand-alone installation
CPS25x Power supply/mains adapter.
MAC001 DIN rail mounting kit for MPC rear assembly.
MAC001
DIN rail mounting kit for MPC rear assembly
includes mounting plate and screws
MAC002
DIN rail mounting kit for MPC side assembly
includes mounting plate and screws
MAC003
DIN rail mounting kit for MPH100 rear assembly
includes mounting plate and screws
MAC004
DIN rail mounting kit for MPH100 side assembly
includes mounting plate and screws
MAC005
DIN rail mounting kit for MPH200 rear assembly
includes mounting plate and screws
MAC006
DIN rail mounting kit for MPH200 side assembly
includes mounting plate and screws
MAC007
Wall mounting kit for MES rear assembly
includes mounting plate only
CPS250
Power supply/mains adapter, NEMA 5-15 plug
230VAC 12V/2.1A, without mains cable
CPS251 CPS252
230VAC 12V/2.1A, EU mains cable Power supply/mains adapter, for MPC/MPX/MPH
CPS253
115VAC 12V/2.1A, US mains cable
CPS451 CPS452 CPS453
230VAC 12V/2.1A, UK mains cable 230VAC 24V/3.3A, EU mains cable
Power supply/mains adapter, for MES
230VAC 24V/3.3A, UK mains cable 115VAC 24V/3.3A, US mains cable
MAC003 DIN rail mounting kit for MPH100 rear assembly.
16
MPX Accessories
Available MPX products 08/2013
Video, data, audio and management cables CIC401
Audio cable
RJ-45 – 4 x RCA male
3.0 m
CIC504
Management cable for MPC & MPX
RJ-45 – D9 female
2.0 m
CIC506
Management cable for MPH
Screw terminal – D9 female
2.0 m
CIC603
Connection cable
RJ-45 – open wires
2.5 m
DVX909
Video cable, angled
BNC – BNC
20 cm
CIC303
Video cable, straight
BNC – BNC
50 cm
Ethernet connection cables
MAC006 DIN rail mounting kit for MPH200 side assembly.
CIC702
CAT5 cable, direct connected
RJ45 – RJ45
20 cm
CIC705
CAT5 cable, direct connected
RJ45 – RJ45
50 cm
CIC707
CAT5 cable, direct connected
RJ45 – RJ45
70 cm
CIC720
CAT5 cable, direct connected
RJ45 – RJ45
2.0 m
CIC750
CAT5 cable, direct connected
RJ45 – RJ45
5.0 m
OPUS1CCC0020X
CAT5e SFTP, Ethernet, cross connected
RJ-45/RJ-45, 20cm
OPUS1CCC0050X
CAT5e SFTP, Ethernet, cross connected
RJ-45/RJ-45, 50cm
OPUS1CAA0300XA
CAT5e SFTP, Ethernet, cross connected
RJ-45/RJ-45, 3m
OPUS1ENN0200DA
Multimode, dual fibre
LC – LC
2.0 m
OPUS1DNN0200DA
Singlemode, dual fibre
LC – LC
2.0 m
OPUS1DNN1000DA
Singlemode, dual fibre
LC – LC
10.0 m
OPUS1DDN0200DA
Single mode, dual fibre
SC/PC-LC
Installation fibres
2.0 m
MAC007 Wall mounting kit for MES rear assembly.
MPX Accessories
17
Available MPX products 08/2013
SFP transceivers can be ordered separately. For MPX and MPC products SFP’s can also be ordered as part of the product configuration.
Note for MPH encoders: These use different range of Fast Ethernet SFPs (MSG Gigabit SFP range is compatible with the MPH encoders). Note for MES switches: Only MWF and MWG range is compatible.
SFP tranceiver modules
SFP MPX, MPC SFP Modules for Fast Ethernet (Suitable only for MPC and MPX) For most typical applications the desired product configurations or combinations are available as ready-defined ordering codes. For alternative selfmade combinations or spare part use the SFPs are also available as individual product items as shown beside. The available SFP portfolio is divided into two main categories; Fast Ethernet and Gigabit Ethernet transceivers.
MSF111A
Multimode 1310nm, 11dB
2km (FS1), -40…+85°C, 2 x LC
MSF214A
Single-mode 1310nm, 19dB
30km (FS2), -40…+85°C, 2 x LC
MSF224A
Single-mode 1550nm, 19dB
20km (FS3), -40…+85°C, 2 x LC
MSF218A
Single-mode 1310nm, 30dB
60km (FL2), -40…+85°C, 2 x LC
MSF228A
Single-mode 1550nm, 30dB
100km (FL3), -40…+85°C, 2 x LC
MSF229A
Single-mode 1550nm, 35dB
120km (FE3), -40…+85°C, 2 x LC
MSF618C
CWDM 1470nm, 31dB
100km (F11), 0…+70°C, 2 x LC
MSF628C
CWDM 1490nm, 31dB
100km (F12), 0…+70°C, 2 x LC
MSF638C
CWDM 1510nm, 31dB
100km (F13), 0…+70°C, 2 x LC
MSF648C
CWDM 1530nm, 31dB
100km (F14), 0…+70°C, 2 x LC
MSF658C
CWDM 1550nm, 31dB
100km (F15), 0…+70°C, 2 x LC
MSF668C
CWDM 1570nm, 31dB
100km (F16), 0…+70°C, 2 x LC
MSF678C
CWDM 1590nm, 31dB
100km (F17), 0…+70°C, 2 x LC
MSF688C
CWDM 1610nm, 31dB
100km (F18), 0…+70°C, 2 x LC
MSF425A
Single-mode BIDI 1310/1550nm, 23dB
25km (FSA), -40…+85°C, 1 x LC
MSF435A
Single-mode BIDI 1550/1310nm, 23dB
25km (FSB), -40…+85°C, 1 x LC
MSF427A
Single-mode BIDI 1310/1550nm, 29dB
60km (FLA), -40…+85°C, 1 x LC
MSF437A
Single-mode BIDI 1550/1310nm, 29dB
60km (FLB), -40…+85°C, 1 x LC
SFP tranceiver modules
SFP MPH SFP Modules for Fast Ethernet (Suitable only for MPH100/400 series) MIF111D
SGMII, Multimode 1310nm, 11dB
2km, -10…+70°C, 2 x LC
MIF111E
SGMII, Multimode 1310nm, 11dB
2km, -35…+75°C, 2 x LC
MIF214E
SGMII, Single mode 1310nm, 16dB
30km, -35…+75°C, 2 x LC
Check availability of alternative models not listed in here.
18
MPX Accessories
Available MPX products 08/2013
SFP tranceiver modules
SFP MES SFP Modules for Fast Ethernet (Suitable only for MES series) 2 fibre version
Tx
1 fibre version
Rx
2 x LC = dual fibre, 1 x LC = single fibre.
Tx/Rx
MWF111A
Multimode 1310nm, 7.5dB
2km, -40…+85°C, 2 x LC
MWF214A
Single mode 1310nm, 19dB
20km, -40…+85°C, 2 x LC
MWF218A
Single mode 1310nm, 30dB
40km, -40…+85°C, 2 x LC
MWF321A
Multimode BIDI 1310/1550nm, 11dB
2km, -40…+85°C, 1 x LC
MWF331A
Multimode BIDI 1550/1310nm, 11dB
2km, -40…+85°C, 1 x LC
MWF424A
Single mode BIDI 1310/1550nm, 18dB
20km, -40…+85°C, 1 x LC
MWF434A
Singlemode BIDI 1550/1310nm, 18dB
20km, -40…+85°C, 1 x LC
Check availability of alternative models not listed in here. SFP tranceiver modules
SFP MPX, MPC SFP Modules for Gigabit Ethernet (Suitable only for MPC and MPX) MSG020C
Electrical CAT5 10/100/1000Base-T
CAT5 (GTR), 0…+70°C, 1 x RJ-45
SFP tranceiver modules MPC MPH SFP MPX,
SFP Modules for Gigabit Ethernet (Suitable only for MPC, MPX and MPH) MSG010C
MPX Accessories
Electrical CAT5 1000Base-T
CAT5 (GTA) 0…+70°C, 1 x RJ-45
19
Available MPX products 08/2013
SFP tranceiver modules MPC MPH, CFO SFP MPX,
SFP Modules for Gigabit Ethernet (Suitable for MPC, MPX, MPH and CFO)
SFP (small-form pluggable).
MSG101B
Multimode 850nm, 8.5dB
550m (GS0), -20…+85°C, 2 x LC
MSG111A
Multimode 1310nm, 10dB
2km (GS1), -40…+85°C, 2 x LC
MSG211A
Single-mode 1310nm, 10.5dB
10km (GS2), -40…+85°C, 2 x LC
MSG214A
Single-mode 1310nm, 20dB
30km (GL2), -40…+85°C, 2 x LC
MSG222A
Single-mode 1550nm, 12dB
30km (GS3), -40…+85°C, 2 x LC
MSG224A
Single-mode 1550nm, 20dB
50km (GL3), -40…+85°C, 2 x LC
MSG226A
Single-mode 1550nm, 24dB
70km (GE3), -40…+85°C, 2 x LC
MSG228B
Single-mode 1550nm, 30dB
110km (GU3), -20…+85°C, 2 x LC
MSG614C
CWDM 1470nm, 20dB
50km (G11), +5…+85°C, 2 x LC
MSG624C
CWDM 1490nm, 20dB
50km (G12), +5…+85°C, 2 x LC
MSG634C
CWDM 1510nm, 20dB
50km (G13), +5…+85°C, 2 x LC
MSG644C
CWDM 1530nm, 20dB
50km (G14), +5…+85°C, 2 x LC
MSG654C
CWDM 1550nm, 20dB
50km (G15), +5…+85°C, 2 x LC
MSG664C
CWDM 1570nm, 20dB
50km (G16), +5…+85°C, 2 x LC
MSG674C
CWDM 1590nm, 20dB
50km (G17), +5…+85°C, 2 x LC
MSG684C
CWDM 1610nm, 20dB
50km (G18), +5…+85°C, 2 x LC
MSG311C
Multimode BIDI 1310/850 nm, 11dB
550m (GSF), -0…+70°C, 1 x LC
MSG301C
Multimode BIDI 850/1310nm, 11dB
550m (GSE), -0…+70°C, 1 x LC
MSG443A
Single-mode BIDI 1310/1490nm, 15dB
20km (GMC), -40…+85°C, 1 x LC
MSG453A
Single-mode BIDI 1490/1310nm, 15dB
20km (GMD), -40…+85°C, 1 x LC
MSG424A
Single-mode BIDI 1310/1550nm, 20dB
40km (GLA), -40…+85°C, 1 x LC
MSG434A
Single-mode BIDI 1550/1310nm, 20dB
40km (GLB), -40…+85°C, 1 x LC
SFP tranceiver modules
SFP MES SFP Modules for Gigabit Ethernet (Suitable only for MES series) MWG111A
Multimode 1310nm, 10dB
2km, -40…+85°C, 2 x LC
MWG211A
Single mode 1310nm, 10.5dB
10km, -40…+85°C, 2 x LC
MWG224A
Single mode 1550nm, 20dB
50km, -40…+85°C, 2 x LC
MWG443A
Singlemode BIDI 1310/1490nm, 15dB
20km, -40…+85°C, 2 x LC
MWG453A
Singlemode BIDI 1490/1310nm, 15dB
20km, -40…+85°C, 2 x LC
Check availability of alternative models not listed in here.
20
MPX Accessories
MPC and MPX Features (* optional) Video Channels Output streams
MPC-E1
MPC-E2
MPC-EZ
MPC-E4
MPX-E8
MPC-D1
MPC-D2
MPC-D4
MPX-D8
1
2
2
4
8
1
2
4
8
20 (max)
20 (max)
40 (max)
40 (max)
Coding
80 (max)
-
MPEG-4/MJPEG/MPEG-2*
Resolution
MPEG-4/2: QCIF/CIF/2CIF/4CIF/½D1/D1, MJPEG: QCIF/CIF/2CIF/4CIF/4CIFpi/D1
Frame rate (fps)
1...25 PAL / 1...30 NTSC
Performance (max. 25/30 fps) MPEG-4
1 x 4CIF/D1
2 x 2CIF 1 x 4CIF/D1
2 x 4CIF/D1
4 x 2CIF 2 x 4CIF/D1
8 x 2CIF 4 x 4CIF/D1
1 x 4CIF/D1
2 x 4CIF/D1
4 x 4CIF/D1
8 x 4CIF/D1
MPEG-2*
1 x D1
1 x D1
2 x D1
2 x D1
4 x D1
1 x D1
2 x D1
4 x D1
8 x D1
1 x 4CIF/D1
2 x 4CIF/D1
4 x 4CIF/D1
4 x 4CIF/D1
8 x 4CIF/D1
1 x 4CIF/D1
2 x 4CIF/D1
4 x 4CIF/D1
8 x 4CIF/D1
2
2
3
MJPEG JPEG capture
Yes (adjustable capture rate)
Motion detection
-
Yes
-
Text overlay
Yes
SAP
Yes (Session Announcement Protocol)
NTP
Yes (Network Time Protocol)
RSTP Data channels
Yes (Real Time Streaming Protocol) 2
2
2
2
Standard
3
2
RS232/422/485
Audio channels
2
2
4
4
2 / 8*
2
2
4
2
Contact closures
1 / 3*
2*
2
-
8* / 4*
1 / 3*
2*
-
8*
Ethernet ports
1 / 2*
1 / 2*
1
2
1 / 2*
1 / 2*
Size (H x W x D) mm
60/80 x 130 x 130
SFP optics *
1 80 x 130 x 130
60/80 x 130 x 130
1
2
80 x 130 x 130
1U x 19” x 236
Available: MMF/SMF 1310nm / SMF 1550nm / CWDM (ITU G.694.2) / SMF bidi 1310/1550nm
Connector
LC
Management Power consumption
1U x 19” x 236
WebUI / SNMP / CLI (password protected user groups with different user levels, CLI via serial or Telnet connection) 4.6 W
Available MPX Products
4.6 W
6.6 W
16 W
4.6 W
4.6 W
6.6 W
16 W
21
MPH Features (* optional) Video CVBS Video input(s)
MPH101/111
MPH102/112
MPH401/411
MPH402/412
MPH241
MPH242
1 (with loop-through)
2
1 (with loop-through)
2
1 (with loop-through)
2
1 (HD-SDI)*
up to 4
DVI Video input
-
Encoding channels
up to 4
up to 4
up to 4
up to 4
up to 4 1 (720i/1080p)*
Total streams
up to 8
up to 6
up to 8
up to 6
up to 8 1 (1080p)*, up to 4 (720i)*
up to 6
QCIF/CIF/2CIF/4CIF, ½D1/D1/HD 1080p*
QCIF/CIF/2CIF/4CIF, ½D1/D1
1 x 4CIF/D1 4 x 25/30 fps 1 x HD 1080p* 1 x 25/30 fps
2 x 4CIF/D1 2 x 25/30 fps
Coding
H.264/MJPEG/MPEG-4*/MPEG-2* QCIF/CIF/2CIF/4CIF, ½D1/D1
Resolution Frame rate (fps)
1...25 PAL, 1...30 NTSC
Performance (max. 25/30 fps)
H.264, MJPEG, MPEG-4*, MPEG-2*
1 x 4CIF/D1 4 x 25/30 fps
2 x 4CIF/D1 2 x 25/30 fps
1 x 4CIF/D1 4 x 25/30 fps
2 x 4CIF/D1 2 x 25/30 fps
ONVIF
Yes
SNMP
Yes
Motion detection
Yes
Camera tampering
Yes
Text overlay
Yes
SAP
Yes (Session Announcement Protocol)
NTP
Yes (Network Time Protocol)
RTSP
Yes (Real Time Streaming Protocol)
Data channels
2
Standard
Data 1: RS422/485, Data 2: RS232
Audio channels
-
Coding
-
2 G.711. G.726, AAC-LC, AAC-HE*
Contact closures Ethernet ports
2 in, 1 out 1
4
1 x 10/100/1000*Base-T or 1 x 100/1000*Base-Fx (SFP)
2 x 10/100/1000Base-T 2 x 1000Base-X (SFP)
VLAN
16 ids
Multicast
IGMP v1, v2
Link redundancy
STP/RSTP
Protocols SFP transceivers* Fast Ethernet Gigabit Ethernet Management Size (H x W x D) Operating temperature
RTP, UDP, TCP, IP, HTTP, DHCP, SSH, Telnet, DHCP, DNS, ZeroConf, ICMP, ARP, QoS Fast/Gigabit Ethernet
Gigabit Ethernet
MMF/SMF 1310 nm
-
MMF/SMF 1310 nm / SMF 1550 nm / CWDM (ITU G.694.2) / SMF bidi 1310 / 1490/1550 nm WebUI / SNMP / CLI (password protected user groups with different user levels, CLI via serial or SSH connection) 41 x 129 x 166.5 mm (1.61 x 5.07 x 6.55 in) 130 x 26 x 170 mm (5.12 x 1.02 x 6.69 in) -34...+74 °C (-29...+165 °F)
Power consumption Power Over Ethernet
-10...+60 °C (14...+140 °F) 5.5 W
PoE+, 802.11af, 7.5W (class 3)
52.5 x 130 x 254 mm (2.06 x 5.11 x 10.00 in) -34...+74 °C (-29...+165 °F) 13 W
-
PoE+, 802.11at, 15W (class 4)
22 Available MPX Products
MCC Features (* available Q4/2013) Video
MCC101
MCC201
MCC104*
CVBS Video input(s)
1
1
4
CVBS output
1
1
1 (quad)
HDMI input
-
1
-
HDMI output
-
1
-
HD/SD-SDI input
-
1
-
HD/SD-SDI output
-
1
-
CIF/2CIF/4CIF/½D1/D1
HD: up to 1920*1080p SD: CIF/2CIF/4CIF/½D1/D1
Coding Resolution
H.264/MJPEG
PAL: 1/2/3/4/6/8/10/15/20/25 (50i) NTSC: 1/2/3/4/6/8/10/15/20/25/30 (60i)
Frame rate (fps) Dual streaming Max streams
yes 1*10 Mbps & 1*1Mbps
1*10 Mbps & 1*1Mbps
ONVIF
Yes
SNMP
Yes
Motion detection
Yes
Event management
Yes
USB recording
Yes
RTSP/RTP/TS
Yes
IGMP
Yes
DHCP
Yes
NTP
Yes
Data channels
Data 1: RS422/485, Data 2: RS232
Audio channels
2
Coding
G.711 (64kbps) , AAC (64/128kbps)
Contact closures
2 x sensor input, 2 x alarm output 1 x 10/100Base-TX
PoE Protocols
1 x 10/100Base-TX
802.3af
WebUI/SNMP/ONVIF/PSIA/SDK
Size (H x W x D)
33 x 134 x 126 mm (1.29 x 5.27 x 4.96 in)
Operating temperature
Available MPX Products
1 x 10/100/1000Base-TX
IGMP, UDP, TCP, ICMP,DHCP, HTTP, HTTPS, RTP, RTSP, FTP, SNMP, SMTP, UPnP, WS-Discovery, Zero Configuration, NTP, DDNS
Management
Supply voltage (max power)
4*4 Mbps & 4*1Mbps
2
Standard
Ethernet ports
CIF/2CIF/4CIF/½D1/D1
-10...+50 °C (14...+122 °F) 12 VDC/ 7,2W
12 VDC/ 9,6W
12 VDC/ 7,2W
23
Teleste is an international technology group founded in 1954, specialized in broadband video and data communication systems and services. Video Networks, as one of the business units of Teleste’s operations, has long experience of creating value-added security solutions for its customers using fibre optics and increasingly digital and IP networks. A clear advantage in Teleste’s offering is the synergy created by its
expertise in broadband cable allied to a strong showing in video networks. As Legacy CCTV systems have begun the technology shift towards digital and IP networks, Teleste Video Networks aims to be at the forefront of developments. With all the various technologies required for legacy, hybrid and new CCTV systems at its disposal Teleste is able to ensure smooth migration and system integration for anyone in need.
Contacts – Teleste Video Networks Finland, Turku
France, Paris
Teleste Headquarters, Sales Nordic, Baltic, Russia & Kuwait Tel. +358 2 2605 611 Fax. +358 2 2605 880 www.teleste.com
[email protected]
Teleste SAS, Sales France, Spain, Portugal & Italy Tel. +33 1 5593 4414 Fax. +33 1 5593 1416
Teleste Sweden AB, Sales Scandinavia Tel. +46 8 710 21 90 Fax. +46 8 622 68 91
United Kingdom, Peterborough Teleste UK, Sales UK, Greece, Turkey, Middle East & Africa Tel. +44 1832 274 838
Germany, Hildesheim Teleste Germany, Sales Germany, Austria, Switzerland Tel. +49 5034 879 332 Fax. +49 5034 879 331
Teleste Video Networks Sp. Z o.o, Sales CEE Tel. +48 12 626 74 40 Fax. +48 12 626 74 41
USA, Georgetown TX Teleste LLC, Sales US & Americas Tel. +1 512 868 2009 Fax. +1 512 868 8112
Australia, Queensland Teleste Australia, Sales APAC Tel. +61 407 171 769
P5P_MPX, August 2013
Sweden, Täby
Poland, Krakow
