Preview only show first 10 pages with watermark. For full document please download

Pa600 Ii Mobile Computer Quick Reference Guide - Pa600 Ii -

   EMBED


Share

Transcript

PA600 II Mobile Computer - PA600 II - Unitech is a member of Oracle Embedded Software Licensing Program Quick Reference Guide Copyright 2010 Unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of Unitech Electronics Co., Ltd. PA600 II Components 8 1 Status indicator 11 Reset button 2 Speaker 12 Hand strap 3 Power button 13 Speaker 4 Microphone 14 Strap holder 5 Keypad 15 Memory card slot 6 Universal connector 16 Bar code scanner window 7 LCD touch-screen 17 Headphone jack 8 Left scanner trigger button 18 Stylus 9 Battery compartment 19 Right scanner trigger button 10 Battery compartment latch 20 Infrared port Copyright 2010 Unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of Unitech Electronics Co., Ltd. Turning on the PA600 II for the first time After you have charged your device for 12 hours, the device is ready to be used. You can now start up the device and begin by calibrating the display, learning how to use the stylus, and setting up the system’s date and time. Power ON Button Turn on your device by pressing the power button on the front panel. Installing the battery 1. Open the battery compartment by pushing the latch in the direction of the arrow and lifting up. Compartment contacts Plastic battery tab Battery securing clip 2. Position the battery pack, making sure the battery contacts are aligned with the contacts in the compartment and the battery is placed on top of the plastic tab, as shown in the following illustration. 3. Slide the battery pack into the battery bay while simultaneously pulling the plastic tab and securing clip until the battery clicks into place. 4. Replace the battery compartment cover. Securing clip Plastic tab Copyright 2010 Unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of Unitech Electronics Co., Ltd. Keypad and Function Buttons When the Function button is pressed, an icon appears on the desktop. Function activated icon 1 Turns the PA600 II ON and OFF. 11 Function key 2 Number 1, Left soft key 12 Tab, Windows open 3 4 Alphanumeric- 2, A, B, C, Up key Alphanumeric- 3, D, E, F, Right soft key 13 14 Alphanumeric- 7, P, Q, R, S, Brightness down Alphanumeric- 8, T, U, V, Down key Alphanumeric- 9, W, X, Y, Z, 5 Enter key, OK 15 6 Backspace, Escape key 16 Alpha 17 Asterisk, Illuminates keypad 18 Number 0, Space key 19 Period, Pound 20 Down button 7 8 9 10 Alphanumeric- 4, G, H, I, Left key Alphanumeric- 5, J, K, L Alphanumeric- 6, M, N, O, Right key Up button Brightness up Copyright 2010 Unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of Unitech Electronics Co., Ltd.