Transcript
PAC2131 Mullion Style Access Reader Dual frequency 13.56MHz and 125KHz proximity card reader
Migration to smart cards From popular proximity to state of the art contactless card technology
Flexible Supports a wide variety of HF and LF credentials Offers popular Wiegand and RS485 interfaces
Future proof Firmware upgradability secures your investment and enables support for future types of credentials
Typical Applications Identive’s Dual frequency access reader is specifically designed to support upgrading widely used Prox® credential legacy infrastructure to contactless 13,56MHz credential infrastructure. With this product it is possible to have an access control installation with both HF and LF contactless credentials at the same time. Identive makes your investment future proof and migration easy by providing:
Wiring and power supply compatibility to many popular proximity readers
Concurrent support of HF and LF credentials
Easy interface with existing access control panels via Wiegand or RS485
Configuration cards to adapt to different installation requirements
Firmware upgradability
Supported credential types
125 kHz Prox® cards CSN, AWID CSN 13.56 MHz ISO 15693 (I-CODE® SLI, MyD™, Tag-it™), ISO 14443A CSN (MIFARE® classic , Ultralight, DESFire and DESFire EV1, MIFARE® Plus), ISO 14443B CSN, US Government PIV and CAC card (CHUID, FASC-N), ConCERTO Cards
PAC2131 Mullion Style Access Reader Dual frequency 13.56MHz and 125KHz proximity card reader
Technical Features Parameter
Value/Description
Host
Wiegand RS485 (2 wires)
Contactless interface
HF (13.56MHz) ISO14443 A/B – ISO 15693 • Support ISO14443 Part 1 to 4 • Communication speed: 106 Kbps - 424kbps • MIFARE® CSN/UID (Classic, DESFire-EV1®) • ConCERTO on DESFire-EV1® • PIV and CAC (CHUID, FASC-N) • HF(13.56MHz) ISO15693 Part 1 to 3 • iCLASS® CSN/UID (unique serial number) • Read all ISO 15693 CSN (Card serial number) • Read-out distance: up to 4cm (1.6 inch) LF (125kHz) • HID Prox Card, AWID • Read-out distance: up to 7cm (2.8inch)
Human
Tricolour LED beam (green/amber/red) for access information (granted or denied) Buzzer for user acoustic feedback
Firmware
Secure in field firmware upgrade through the serial interface and/or configuration card Firmware customization possibility
Operating environment
Indoor and outdoor Temperature : -35°C to +65°C Humidity : up to 95%RH non-condensing IP65
Security
Wiegand “I’m alive” or Heart Beat Optical anti-tamper sensor
Dimensions [LxWxH]
94 x 44 x 27 mm - 3,7” x 1,7” x 1,1 “
Housing
UL94 polycarbonate
Power
5-16V DC, 130mA max
Approvals
FCC, IC, CE, RoHS
Technical data are subject to change without notice
Contacts Identive ID Infrastructure Division Identive GmbH Oskar-Messter-Str. 13 85737 Ismaning Germany
Identive Group, Inc 1900-B Carnegie Avenue Santa Ana, CA 92705 USA
Identive KK GoogolPlex Millennium Building 6F 4-4-20 Shiba, Minato-ku, Tokyo, 108-0014, Japan
Phone + 49 89 9595 5000 Fax + 49 89 9595 5555
[email protected]
Phone + 1 888 446 9008 Fax + 1 888 446 1210
[email protected]
Phone + 81 3 6414 6611 Fax + 81 3 6414 6612
[email protected]
© 2012 Identive Group,Inc, all rights reserved. Reproduction is prohibited without the consent of the copyright owner. All in formation contained in this document is provided “AS IS”; Identive Group assumes no responsibility for its accuracy and/or completeness . In no event will Identive be liable for damages arising directly or indirectly from any use of the information contai ned in this document.
Identive GmbH Unit 11, 4607-11, The CENTRE 99 Queen´s Road Central Hong Kong Phone + 91 44 2254 0020 Fax + 91 44 2254 0029
[email protected] Date of release: 2012-xx-xx
www.identive-group.com
