Packaged Audio Products

Transcript

PC-643S PC-644S BS-677B / 677BT BS-677W / 677WT F-160G / 160GM F-160W / 160WM F-240G / 240GM F-240W / 240WM PC-645R PC-646R PC-1864 PC-1867 / PC-1863 PC-2668 BS-1030B BS-1030W BS-330 / 330T Packaged Audio Products ef www.toa.de © TOA Electronics Europe GmbH (0803) 833TEEC076 Specifications are subject to change without prior notice. Errors excepted. Application Example 3 About TOA Mosque / Club House etc. 18m EM-400 Since it’s foundation in 1934 the TOA Corporation had a leading effect upon the development of the acoustic and communication technology. Among others TOA invented the Reflex Horn as well as the Transistor Megaphone. Several patents and state of the art products stand for an unequalled innovative company. DM-1300 TZ-205 or BS-1030B A-1121 TOA operates in more than 100 countries worldwide. This branch, TOA Electronics Europe, is responsible for the sales and distribution of TOA Products throughout mainland Europe, Middle East and Africa. TOA products range from amplifiers and speakers used in foreground and background music systems, to mixers, wireless microphone systems and digital processors used in sound reinforcement, to intercom security systems. This catalogue offers a selection of products from these ranges - Public Address - Professional Sound System 10m • Background music inside. • Separate outdoor sound (e.g. from minaret or paging during a competition, etc.). • Separate volume controls for indoor and outdoor. for the design of small up to intermediate sized sound systems. OFF DM-1300 A-1061 EM-400 MIC 1 MIC 3 AUX 1 TZ-205 AUX 2 BASS TREBLE MASTER POWER 10 8 6 ON 4 10 0 For further information for the design of intermediate to large sound systems please contact your local dealer. Such systems are built-up with the Venas and Smart Matrix systems components. Dedicated to security applications the VX-2000 series fulfills the EN 60849 standard. A basic demand in any kind of security application is a high grade of intelligibility. And a good sound quality is an essential condition for it. MIC 2 10 0 PA AMPLIFIER 10 0 10 0 10 0 0 -10 OFF 2 +dB 0 -10 10 0 model A-1121 REC. OUT A-1061 MIC 1 MIC 2 AUX. IN MIC 3 AUX 1 AUX 2 BASS TREBLE MASTER POWER 10 TC-630M e.g. for Minaret 8 6 ON 4 0 10 PA AMPLIFIER 0 10 0 10 10 0 0 -10 10 0 OFF 2 +dB 0 -10 0 10 model A-1121 Church 20m DM-1300 Sound quality and safety are part of our concept: safe & sound. WM-4310 BS-1030W + WCB-12W or BS-1110 / BS-1120 A-1121 (120W) Cassette / CD 15m • Good sound quality. • Clear and intelligible speech transmission • Wireless microphones for free movement. OFF DM-1300 A-1121 OFF DM-1300 MIC 1 MIC 2 MIC 3 AUX 1 AUX 2 BASS 30W TREBLE MASTER 30W POWER 10 8 Smart Matrix SX-1000 Series Venas VX-2000 Series 6 Venas VM-2000 Series ON 4 10 0 PA Lavaliere Microphone WM-4310 Cassette / CD 0 AMPLIFIER 10 0 10 0 10 0 10 -10 0 -10 0 2 +dB 0 OFF 8 10 model A-1121 BS-1030W WT-4810 DIRECTORY Application Examples: Supermarket / Factory Microphones for Speech and Vocal : Speech and Lecture: EM-400 / DM-1100 / DM-1200 / DM-1200D Speech and Vocal: DM-1300 Microphones for Paging Use : Hand-held Microphones: PM-222 / PM-120 Desk-top Microphones: PM-660 / PM-660D / EC-100M Microphone Preamplifiers: RU-2001 / RU-2002 Sound Repeaters: EV-20R / PM-20EV Mikrophone Stands : Desk Stands: ST-65 / ST-66 Floor Stands: ST-301B / ST-302B Package Amplifiers : A-1000 Series: A-1031 / A-1061 / A-1121 A-1700 Series: A-1706 / A-1712 / A-1724 A-1800 Series: A-1803 / A-1806 / A-1812 / P-1812 Horn Speakers : Drivers: TU-630 / TU-650 / TU-630M / TU-650M Reflex Horns: TH-650 / TH-660 Horn Speakers: TC-615 / TC-615M / TC-630 / TC-630M Paging Horn Speakers: SC-610 / SC-610M / SC-615 / SC-615M / SC-630 / SC-630M / SC-650 Wide Range Speakers : For Indoor Use: PJ-100W / PJ-200W For Outdoor Use: CS-64 / CS-154 / CS-304 Box and Column speaker : Box speaker for Wall Mounting: BS-330 / BS-330T / BS-677B / BS-677BT / BS-677W / BS-677WT Column Speaker: TZ-105 / TZ-205 / TZ-301 Universal Speaker: BS-1030B / BS-1030W / BS-1110W / BS-1120W Accessories: WCB-12 / WCB-12W / SP-410 / SP-420 / TMB-1 / ST-16 High Quality Speaker : Foregroundmusic: F-160G / -160GM / -160W / -160WM / -240G / -240GM / -240W / -240WM Mounting brackets: WCB-12 / WCB-12W / WCB-24 / WCB-24W / CMB-31 / CMB-31W Ceiling Speaker : Flush-mount: PC-645R / PC-646R / PC-643S / PC-644S / PC-1863 / PC-1864 / PC-1867 Fire Dome Speakers: PC-1867F / PC-1867FC Surface-mount Speaker: PC-2668 Wide-Dispersion Flush-mount Ceiling Speakers: F-122C / F-2322C / F-2352C / F-2852C F-1522SC / F-2352SC / AC-120 Accessories: HY-AH1 / HY-BC1 / HY-TB1 / HY-TR1 AT-12UP / AT-50UP / AT-12UPR / AT-50UPR / YS-270 / ATT-311 / AT-063P / AT-303P / AT-603P Impedance Meter : ZM-104 Mobile Amplifiers : CA-115 / CA-130 / CA-160 / CA-107 / CA-207 / CA-407 Wireless Systems : UHF Band: WT-4810 / WT-4820 / WTU-4800 / WM-4210 / WM-4220 / WM-4310 / WM-4310A / WM-4310H Meeting Amplifier: WA-1822 / WA-1822C VHF Band: WT-3810 / WTU-3800 / WM-3210 / WM-3220 / WM-3310 / WM-3310H Megaphones : ER-510 / ER-510W / ER-510S / ER-1015 / ER-1015S / ER-2015 / ER-2015W / ER-604W Mobile PA Systems : Mixer: MX-628 2 Way SR Speaker: SL-122 / SL-152 / SL-222 / ST-32 Open Conference System : TS-700 / TS-701 / TS-702 / YR-700 / TK-708A / TK-712A / AR-71 Technical Column : Microphones / Speakers Amplifiers Application Examples : Office / Gymnasium / Mosque / Club house / Church 4 5 5 6 6 7 7 8 8 9 10 11 12 12 13 14 15 15 16 16 17 17 18 18 19 20 20 21 22 22 23 23 24 25 25 26 27 28 29 30 32 33 34 35 Application Example 1 Supermarket 43m AT-12UP Office PM-660 Ceiling Speaker A-1121 Cashier 7m 20m warehouse Deposit Counter 7m 7m • Backgroundmusic • Announcements / paging from the office • Volume Control for the office A-1121 PM-660 MIC 1 MIC 2 MIC 3 AUX 1 AUX 2 BASS TREBLE MASTER 10 POWER 8 6.7k 1.7k 13k 3.3k COM 6 10 0 PA AMPLIFIER 10 0 10 0 0 -10 10 0 -10 0 1.7k 13k 3.3k 3W OFF 2 +dB 0 6.7k COM ON 4 10 0 10 3W model A-1121 Ceiling Speaker x 18 CD 6.7k 1.7k 13k 3.3k COM 1.5 W Ceiling Speaker x 1 (Office) Factory 35m Ceiling Speaker SC-615M AT-12UP/AT-50UP Canteen EC-100M or PM-660D Office A-1812 *1) Meeting room *1 25m • Music distribution during recess • Annnouncements with chime • Selectable paging area Outdoor area CD A-1812 Radio MIC1 MIC2 MIC3 AUX1 10 0 10 0 10 0 10 0 10 0 MASTER 1 10 TREBLE 6.7k 1.7k 13k 3.3k COM 2 BASS SC-615M x 8 (Hall) 1,5W Ceiling Speaker x 2 (Office) 1,5W Ceiling speaker x 1 (Meeting Room) 1,5W Ceiling speaker x 4 (Canteen) 10W SC-615M x 3 (Outdoor) Zone 1 AUX3 AUX2 ZONE 1 0 10W 3 ZONE 2 0 0 Paging from PABX via Telephone Input 10 0 10 10 ON OFF Zone 2 6.7k 1.7k 13k 3.3k COM 6.7k 1.7k 13k 3.3k COM PM-660D 4 Microphones for Speech, Vocal Use Speech Use EM-400 Model EM-400 Omnidirectional Microphone Type Electret Condenser Mic. • Highly sensitive electret condenser microphone with high sound quality and excellent acoustic effects. • Low noise. • Low power FET ensures long operational life of the semipermanent mercury battery. Directivity Omnidirectional Rated Impedance 2kΩ Frequency Response 50~13,000Hz Cable Length 5m with phone plug Switch Power ON/OFF switch Power Source Mercury battery (Malory H-C /LR44) Standard Operating Voltage 1.3V Continuous Operation 100 hours Dimensions Ø14 x 52mm Weight 140g (with battery) Accessory 1 battery, 1 holder clip DM-1100 • Dynamic hand-heldmicrophone for general use applications. • Rigid diecast aluminum microphone body. • Switching and handling noise suppression. • Fitted with 7.5m phone plug cable. • Microphone holder provided as standard accessory. 7,5m OFF ON Standard Dynamic Microphone W5/16” DM-1200 / DM-1200D 10m ON OFF Microphone for Speech W5/16” Speech and Vocal • Dynamic hand-heldmicrophone for speech use applications. • Rigid diecast zinc microphone body. • Switching and handling noise suppression. • DM-1200 : 10m XLR-phone plug cable supplied with unit. • DM-1200D: 5 m DIN-plug cable with remote control function to activate amplifiers power or a chime for PA systems. • Microphone holder provided as standard accessory. • Balanced output for long distance connection. DM-1300 10000 10m OFF Microphone for Speech / Vocal W5/16” Model DM-1100 Type Directivity Rated Impedance Frequency Response Talk Switch Dimensions Weight Standard Accessory Dynamic microphone (Moving-coil Cardioid 600 Ω unbalanced 100~12,000Hz ON/OFF switch Ø55 x 178mm 155g (with cable) 7,5m cable, phone plug Mic Holder (W5/16”) DM-1200 microphone) Cardioid 600 Ω balanced 50~12,000Hz ON/OFF switch Ø 39.5 x 163mm 298g (without cable) 10m cable, phone plug Mic Holder (W5/16”) • Dynamic hand-heldmicrophone for vocal/ speech use applications. • Rigid diecast zinc microphone body. • Switching and handling noise suppression. • 10m XLR-phone plug cable supplied with unit. • Microphone holder provided as standard accessory. • Balanced output for long distance connection. DM-1200D DM-1300 Cardioid 600 Ω balanced 50~12,000Hz ON/OFF switch Ø 39.5 x 163mm 298g (without cable) 5m cable, DIN plug Mic Holder (W5/16”) Cardioid 600 Ω balanced 70~15,000Hz ON/OFF switch Ø51 x 170mm 245g (without cable) 10m cable, phone plug Mic Holder (W5/16”) 5 Microphones for paging use Hand-held Microphones PM-222 PM-120 Unidirectional Paging Microphone Unidirectional Paging Microphone 44 38 157 145 46 max. 2m • • • • 33 LOCK PUSH ON max. 2.5m Cost effective paging microphone. Hand-held type with push-to-talk switch with lock. Coiled 1-core shielded cable, 2m long with phone plug. Heavy duty metallic body. Model PM-222 Type Directivity Rated Impedance Frequency Response Cables Talk Switch Dimensions (W x H x D) Finish Weight Microphone Hanger Dynamic microphone (Moving-coil Unidirectional 600Ω, unbalanced 100~10,000Hz coiled, 1-core shielded cable Push-to-talk switch with lock 44 x 145 x 38mm ABS resin, Gray 200g Standard Accessory • General-use paging microphone with heavy-duty metallic body. Effective in high ambient noise areas. • Hand-held type with push-to-talk switch with lock. • Coiled 1-core shielded cable, 2.5m long with phone plug. PM-120 microphone) 250Ω, unbalanced 50~12,000Hz 46 x 157 x 33mm Champagne gold (front,), Black (rear) 230g Optional (model 2202) Desk-Top Type Microphones PM-660 PM-660D EC-100M Paging Microphone with phone jack Paging Microphone with DIN-connector Chime Microphone 31 215 215 3 Phone jack (Unbalanced) 150 100 2.5m 5 pin DIN Connector (Balanced) 100 150 Phone jack (Unbalanced) Phone jack (Unbalanced) 2.5m 2m • Large talk switch with locking lever. • Fitted with 2.5m 1-core shielded cable. • Large talk switch with locking lever. • Extra switch contact for remote control. • Fitted with 2.5m 2-core shielded cable and DIN plug. • Built-in 4-tone electronic chime unit. • 2 batteries (AA-type) required. • 2m phone plug to phone plug cable supplied with unit. • 2 Push- Buttons. Model PM-660 PM-660D EC-100M Rated Impedance (sensitivity 0dB=1V/pa) 600 Ω, unbalanced -58dB 600 Ω, balanced -58dB Frequency Response Talk Switch Remote Control 100~10,000Hz 100~10,000Hz Push-to-talk switch type (short-off circuit, with lock lever) -Make contact (interlocked with talk switch) --Head; Zinc plated steel wire, baked painting, Gray/Body; ABS resin, Gray 100 x 215 x 150mm 100 x 215 x 150mm 440g 440g 600 Ω, unbalanced Microphone: -53dB Chime Signal: -45dBV -Push ON - Push OFF -- Power Requirements Finish Dimension (W x H x D) Weight 6 DC 3V (AA-type battery x 2 pcs) Metallic gold (Stand base) 112 x 313 x 150mm 770g Amplifier Control Unit for Long Distance Connection RU-2001 RU-2002 Amplifier Control Unit for microphones with DIN plug (e.g. PM-660D, DM-1200D) Amplifier Control Unit with Chime Signal for microphones with DIN plug (e.g. PM-660D, DM-1200D) 124 124 10 MIC CHIME 4 2 1 G 0 10 0 39.5 ON 0 39.5 MIC ON 10 RU-2002 RU-2002 OUTPUT H C DC IN REMOTE 12/24V DC IN E 12V OUTPUT H TOA Corporation C REMOTE DC IN 12/24V DC IN E 12V MADE IN JAPAN TOA Corporation Model RU-2001 Power Requirements Current Consumption Mic. Input Output Signal 12-24V DC 60mA -62dBV, 600 Ω, unbalanced 0dBV, 600 Ω, balanced -- Dimensions (W x H x D) Weight Finish 124 x 39.5 x 159mm 700g Steel color plate, Black MADE IN JAPAN RU-2002 DC IN 12/24V DC IN 12V 4-tone/2-tone/Single tone chime or gong sound (selectable) Audio Signal (Twin Core Shielded) A-1000 5 pin DIN Plug MIC Aux Input CHIME 4 2 1 G 0 10 0 ON MIC 1 MIC 3 MIC 2 AUX 1 AUX 2 BASS TREBLE MASTER 10 POWER 8 6 10 ON 4 Max Cable Length : 1km Remote Microphone PM-660D 10 0 RU-2002 PA 0 AMPLIFIER 10 0 10 0 10 0 10 -10 0 -10 0 OFF 2 +dB 0 10 model A-1121 Preamplifier RU-2001/2002 (+optional Power Supply Unit) Sound Repeater Both sound repeaters are featuring digital circuitries. Easy recording of announcements, allowing the user to overwrite mistakes until an announcement is perfect. Recording with CD-quality and maintenance-free use. An Automatic Gain Control (AGC) is built-in to eliminate differences in recording levels. Punctuating announcements with chimes possible. EV-20R PM-20EV Sound Repeater for recording and playback of pre-recorded announcements Microphone with Sound Repeater for Recording and Playback • For supermarkets and department stores with a distributed speaker system. • Up to 4 separate message selections or announcements to a total maximum of three minutes may be recorded. Front panel-mounted recording inputs (mic./line switchable). • PC connection via USB. A CD Rom with various chimes is included. • Pre-recorded message can be transferred via USB-Interface. • Built-in interval timer allows messages to be repeated at various time intervals (0.5 seconds up to ∞). • 3W/8Ω amplifier section built-in for direct speaker connection. Volume control for level adjustment of an external source. • A line input and output for connecting various program sources including CD players or dedicated BGM units. • For locally recorded advertisements. • A microphone is included as standard equipment for recording and making announcements. • Built-in monitor speaker allows checking announcements before broadcasting. • Automatic chime for marking the start and end of an announcement. • PC connection via USB possible. • A CD Rom with various chimes is included. • Pre-recorded message can be transferred via USB-Interface. 7 Model EV-20R PM-20EV Power Requirements 24V DC / 400mA or from AD-246 adaptor 10W 20...20 000 Hz ±3dB (1kHz) Input / Recording Input: Mic: -60dBV, 2.2kΩ, Line: -20dBV, 10kΩ unbalanced phone jack Line Input: 0dBV, 10kΩ, unbalanced screw terminals Control Input 10mA terminal block type Line: 0dBV, 600 Ω, unbalanced, terminal block connector Headphone: 0dBV, 100Ω unbal. phone jack Speaker: 3W, 8Ω, terminal block connector Control: terminal block connector Playback Intervals: ∞, 0s, 5s, 10s, 30s, 1 / 4 / 10 / 30 min or 1 h (selectable) Delay: 0, 2 or 4 sec. Recording time: max. 3min., max. 4 messages 210 x 44.2 x 180.2mm 730g ABS resin, Black CD-ROM, Unbalanced phone plug, USB cable, terminal block connector (22-pole) Optional: AD-246 Adaptor 24V DC / 200mA or from AD-246 adaptor 5W 50...20 000 Hz ±3dB (1kHz) Uniderectional gooseneck Microphone / external Mic: -37dBV, 2.2kΩ, unbalanced, mini jack Power consumption Frequency Response Input Output Messages Dimensions (W x H x D) Weight Finish Accessories Line: 0dBV, 600 Ω, unbalanced, terminal block connector Monitor speaker (built-in): 0,2W Delay: 0, 2 or 4 sec. Recording time: max. 3min., max. 1 message 122 x 44.2 x 180mm 710g ABS resin, Black CD-ROM, Unbalanced phone plug cord (2m), USB cable, terminal block connector (7-pole) Optional: AD-246 Adaptor Microphone Stands Desk Stands Floor Stands ST-65 ST-301B Height 120 ~ 175 mm. Clip type microphone holder (W5/16” thread). Height 101 - 172 cm. With boom. 3/8” and 5/16” Adaptor. ST-66 ST-302B Height 220 - 347 mm. Clip type microphone holder (W5/16” thread). Height 94 - 161 cm. 3/8” and 5/16” Adaptor. • Microphone Connection Microphone Output Type/ Impedance Unbalanced/ 250Ω~2kΩ Balanced/ 600Ω 8 Amplifiers Model EM-400 DM-1100 DM-1200 (*1) DM-1300 (*1) PM-222 PM-120 PM-660 EC-100M PM-660D PM-660D DM-1200 (*1) DM-1300 (*1) Supplied cable Length Connector 5m Fixed <=> Phone 7.5 m Fixed <=> Phone 10 m XLR <=> Phone 10 m XLR <=> Phone 2m Fixed <=> Phone 2.5 m Fixed <=> Phone 2.5 m Fixed <=> Phone 2m Phone <=> Phone 2.5 m fixed <=> DIN (*1) : DM-1200/DM-1300 has balanced type output. Its supplied cable is 1-core shielded unbalanced type Model Input A-1031/1061/1121 MIC 2,3 A-1706/1712/1724 MIC 1,2,3 Extensible Cable Connector Type Phone Unbalanced Phone Unbalanced Distance Cable type Approx. 20 m 1-core shielded Unbalanced A-1503/1506/1512 MIC 1 A-1031/1061/1121 (AS) MIC 1 A-1803/1806/1812 with DIN Unbalanced XLR (electrically) DIN (D) XLR (C) Balanced Approx. 80 m Balanced (transformer) 2-core shielded Package Amplifiers A-1000 Series A-1031 (30W) / A-1061 (60W) / A-1121 (120W) • Cost effective and durable mixer power amplifier. • 3 Mic/2 Aux inputs, plus one recording output. • Individual input volume controls plus master volume control. • Mic 1 Input with 5 pin DIN / phone plug. • Voice-activated mic 1 takes precedence over other inputs. • Switchable phantom power. • Speaker outputs 100V, 70V and 4Ω. • Built-in current limiter and thermal protection circuit. • AC mains or DC operation. Typical Connection AC Power 420 MIC 1 MIC 3 MIC 2 AUX 1 AUX 2 BASS TREBLE MASTER 10 POWER ON PA AMPLIFIER 10 0 10 0 10 0 10 -10 0 -10 0 OFF 2 +dB 0 10 Cassette Player 103 6 4 0 88.4 8 10 0 model A-1031 Horn Speaker 262 or Radio Tuner Colummn Speaker 1600 12 V DC Battery (A-1031, A-1061) 24 V DC Battery (A-1121) Modell A-1031 Power Requirement Output Power Consumption Frequency Response Distortion Tone Control S/N Ratio Speaker Output Recording Output Input 220~240V AC (selectable) or 12V DC 30W rated, Max. 45W 120W at AC, 5A at DC Protection Circuit Muting Function Finish Dimensions (WxHxD) Weight 5kg A-1061 Cassette Recorder Microphone (600½, Remote unbalanced) Microphone A-1121 220~240V AC (selectable) or 24V DC 220~240V AC / 24V DC 60W rated, Max. 90W 120W rated, Max. 180W 220W at AC, 9A at DC 380W at AC, 9A at DC 100~10,000Hz, ± 3dB < 1% at 1 kHz, 1/3 rated power Bass: 0 ~ -10dB at 100Hz, Treble: 0 ~ -10dB at 10kHz Better than 92dB (all volume controls: ccw) 100V, 70V line, 4 Ω 0dBV, 600Ω, unbalanced, RCA Pin jack Mic 1,2,3: -55dBV, 600Ω, unbalanced, phone jack Aux 1,2 : -20dBV, 10k Ω, unbalanced, phone jack (AUX1), RCA Pin Jack (AUX2) Current limiter, thermal protection, AC and DC fuse MIC 1 overrides other input signals with 0~30dB attenuation Panel; ABS resin, black/Case; Steel plate, black paint 420 x 103 x 262mm 7kg 10kg 9 Microphone Mixing Amplifiers A-1700 Series A-1706 (60W) / A-1712 (120W) / A-1724 (240W) • 6 / 4 Microphone and 3 / 5 AUX-Inputs offer excellent flexibility. • AUX 3 and AUX 4 are Stereo Inputs. • Input 5 and 6: Switchable Mic or Line Level. • An equalizer may be inserted before the power amplification stage. • For easy recording each A-1700 is equipped with REC OUT connectors. • 2 Speaker Zones can be accessed or All-call. • Remote control of Volume. • Remote Power-on. 220-230V REMOTE VOLUME PA AMPLIFIER model A-1706 OUTPUT RATED 60W 0.4A 50/60Hz C H POWER REMOTE - + MIC6/AUX2 TOA Corporation ENGINEERED IN JAPAN, ASSEMBLED IN CHINA REC OUT LINE OUT AUX 5 AUX 4 AUX 3 MIC 6/AUX 2 MIC 5/AUX 1 OFF SW1 MIC 6 ON AUX 2 MIC 4 MIC5/AUX1 MIC 6 SW2 MIC 5 SW3 OFF AUX 1 ON MIC 3 MIC 5 PHANTOM MIC 4 MIC 3 SW4 OFF SW5 OFF SW6 OFF ON ON ON MIC 2 MIC 2 MIC 1 SW7 OFF SW8 OFF ON ON MIC 1 TOTAL IMPEDANCE 167 C C DIRECT 100V 4â164 ZONE2 100V ZONE1 100V PWR AMP IN SP OUT OUTPUT INPUT Connection Exemple 420 Tape Recorder (REC OUT ) MIC 1 MIC 2 MIC 4 MIC 5/AUX 1 MIC 6/AUX 2 ZONE 1 MASTER 0 dB -6 0 10 0 BASS Speaker MIC 3 10 0 10 0 TREBLE 10 0 AUX 3 10 0 AUX 4 10 -12 AUX 5 Equaliser 0 - + - + 0 10 0 10 0 POWER -18 ZONE 2 10 -24 ON OFF 88.4 Horn Speaker 107.7 Column Speaker 10 PA AMPLIFIER model A-1706 367 18.5 326.5 Cassette Player CD (AUX 4 ) Microphones Cassette Player (AUX 3) * sensitivity selectable: Mic / Aux Level Modell Power Source Rated Output Distortion (THD) Frequency Response Tone Controls Outputs Speaker Recording Outputs Line Outputs Inputs MIC 1 – 4 MIC 5 – 6* AUX 3 – 4 AUX 5 Operating Temperature Finish Dimensions (W x H x D) Weight 10 A-1706 60W 9,3kg A-1712 A-1724 220-240V AC 50/60Hz 120W 240W Less than 2% at 1kHz 50 – 15,000Hz (3W output, AUX input) Bass: ±10dB at 100Hz/Treble: ±10dB at 10kHz High Impedance 100V Line: 83Ω, Low Impedance: 4Ω 0dBV, 600Ω, RCA jacks 0dBV, 600Ω, RCA jacks –60dBV, 600Ω, electrically balanced, combination (XLR/Phone) –60dBV, 600Ω, electrically balanced, combination (XLR/Phone) –22dBV, 10kΩ, RCA pin jacks (stereo) –22dBV, 10kΩ, combination (XLR/Phone) (monaural) 0°C – 40°C Front Panel: ABS resin, Hearline black Case: Black steel plate 420 x 100 x 364mm 12,6kg 13,5kg Mixer Power Amplifiers A-1800 Series A-1803 (30W) / A-1806 (60W) / A-1812 (120W) / P-1812 (120W) 220-230V REMOTE OUT PA AMPLIFIER model A-1806 OUTPUT RATED 60W 0.4A 50/60Hz + CONTROL EMERGENCY - - MOH OUT TEL G EMERGENCY H 600› C C TEL PAGING G H C CHIME BLANK H MOH EMERGENCY AUX 2 AUX 1 (MOH) TEL PAGING MUTE BY TEL SIG MUTE BY MIC 1 SIG PHANTOM SW6 MIC 3 SW7 MIC 2 SW8 MIC 1 CHIME TOA Corporation ENGINEERED IN JAPAN, ASSEMBLED IN CHINA A-1803 / A-1806 / A-1812 REC OUT LINE OUT AUX 3 MIC 3 4 TONE 2 TONE 1 TONE NONE MIC 2 CHIME SW2 OFF ON OFF ON SW3 OFF OFF ON ON P-1812 (Booster Amplifier) MIC 1 TOTAL IMPEDANCE 167› INPUT - +24V C C DIRECT 100V 4‚164› ZONE2 100V ZONE1 100V MIC 1 SELECTOR 1 2 SP OUT 220-230V OUTPUT REMOTE OUT PA AMPLIFIER model A-1806 OUTPUT RATED 60W 0.4A 50/60Hz + - CONTROL EMERGENCY - MOH OUT TEL G INPUT EMERGENCY H 600› C C TEL PAGING H G CHIME BLANK H C MOH EMERGENCY AUX 2 AUX 1 (MOH) TEL PAGING MUTE BY TEL SIG MUTE BY MIC 1 SIG PHANTOM SW6 MIC 3 SW7 MIC 2 SW8 MIC 1 CHIME TOA Corporation ENGINEERED IN JAPAN, ASSEMBLED IN CHINA REC OUT LINE OUT AUX 3 MIC 3 4 TONE 2 TONE 1 TONE NONE MIC 2 CHIME SW2 OFF ON OFF ON SW3 OFF OFF ON ON MIC 1 TOTAL IMPEDANCE 167› INPUT - +24V C C DIRECT 100V 4‚164› ZONE2 100V ZONE1 100V MIC 1 SELECTOR 1 2 SP OUT MIC 1 MIC 2 MIC 3 OUTPUT AUX 1 AUX 2 INPUT AUX 3 ZONE 1 MASTER EMERGENCY 0 dB -6 0 10 0 BASS 10 0 10 0 10 0 10 0 10 -18 ZONE 2 420 - + - POWER -12 TREBLE 0 10 TEL ON OFF -24 + PA AMPLIFIER model A-1806 MIC 1 MIC 2 MIC 3 AUX 1 AUX 2 AUX 3 ZONE 1 MASTER EMERGENCY 0 dB -6 0 10 0 10 0 10 0 10 0 10 -18 ZONE 2 0 - + - POWER -12 TREBLE 10 TEL -24 ON OFF 88.4 10 BASS 107.7 0 + PA AMPLIFIER model A-1806 367 18.5 326.5 • Matching the needs for a small PA-system with emergency function, 2 speaker zones and all-call. • 3 Microphone Inputs, 2 AUX-Inputs, Telephone- and Priority Input. • Emergency call even if the amplifier is switched off • 3 Priorities: emergency, telephone or paging microphone (MIC1) with priority overriding. • All Call from telephone. • Recording output. • Speaker outputs with screw terminals. • Selectable chimes. • Connection of a 120W Booster Amplifier P-1812 possible. Connection Exemple Cassette Player Column Speaker Speaker CD Horn Speaker *) Wireless Receiver Mics Cassette Player PBX H C Speaker TRUNK BOX Booster Amp Paging Microphone PM-660 Connection of a Telephone System System Expansion Model Power Source Rated Output Distortion (THD) Frequency Response Tone Controls Outputs REC LINE Speaker Selection Direct Out MIC 1 MIC 2 - 3 AUX 1 (MOH) AUX 2 AUX 3 TEL EMERGENCY LINE Operating Temperature Finish Dimensions (W x H x D) Weight A-1803 30W Inputs 8,1kg A-1806 A-1812 220-240V AC 50/60Hz 60W 120W Less than 2% at 1kHz 50 – 15,000Hz (3W output, AUX input) Bass: ±10dB at 100Hz/Treble: ±10dB at 10kHz 0dBV, 600Ω, RCA jacks 0dBV, 600Ω, RCA jacks 2 zone, high impedance, individual selector SW, screw terminals High impedance, screw terminals Low impedance, 4Ω, screw terminals –60dBV, 600Ω, combination (XLR/Phone), DIN (5P) –60dBV, 600Ω, combination (XLR/Phone) –20dBV, 10kΩ, RCA jacks –20dBV, 10kΩ, RCA jacks –20dBV, 10kΩ, combination (XLR/Phone) –20dBV, 10kΩ, screw terminals 0dBV, 600Ω, screw terminals 0°C – 40°C Front Panel: ABS resin, black Case: Black steel plate 420 x 100 x 364mm 9,4kg 12,6kg P-1812 120W 50 – 20,000Hz (±3dB) 0dBV, 600Ω, RCA jacks - 0/–10dBV, 10kΩ, RCA jacks -10°C – 40°C 420 x 107.7 x 367mm 12,2kg 11 Horn Speakers IP-65 Driver Units TU-630 (30W) / TU-650 (50W) TU-630M (30W) / TU-650M (50W) 126 ø139 ø139 149 TU-630/650 Set the impedance selctor to the desired impedance LINE VOLTAGE 70V 100V 30W OFF 15W 30W 8W 15W 5W 10W 3W 5W TU-630M/650M Set the impedance selctor to the desired impedance LINE VOLTAGE 70V 100V 50W OFF 25W 50W 15W 30W 8W 15W OFF IMPED. 170 330 670 1k 2k Impedance Selection for TU-630M IMPED. 100 200 330 670 Impedance Selection for TU-650M • Higly efficient horn drivers for reflex horns. • Weatherproof (IP65) in combination with reflex horns TH-650 / TH-660. • 2 input power versions: 30 or 50W. • For high impedance (TU-630M / TU-650M) or low impedance applications (TU-630 / TU-650). Model TU-630 TU-650 TU-630M TU-650M Rated Input Rated impedance Tappings 100V Frequency Response SPL (1W, 1m) Horn Coupling (INCH) Dimensions Weight 30W 16Ω 150 Hz ~ 6kHz 110dB 1-3/8" ø 139 x 106mm 1.5kg 50W 16Ω 150 Hz ~ 6kHz 110dB 1-3/8" ø 139 x 106mm 2.1kg 30W 30W / 15W /10W /5W 150 Hz ~ 6kHz 110dB 1-3/8" ø 139 x 149mm 1.9kg 50W 50W /30W /15W 150 Hz ~ 6kHz 110dB 1-3/8" ø 139 x 149mm 2.7kg Reflex Horns TH-650/ TH-660 TU-Series driver required (optional) ø 600 (TH-660) ø 500 (TH-650) 394 (TH-650) 425 (TH-660) Model TH-650 TH-660 Cut-off Frequency Sound dispersion angle Dimensions (mm) without driver Horn Coupling (INCH) Weight Number of Drivers to be mounted Applicable Drivers 200Hz 50° (2kHz) ø 500 x 394 200Hz 70° (2kHz) ø 600 x 425 1-3/8" 2.9kg 1 1-3/8" 3.6kg 1 TU-630/-630M/-650/-650M TU-630/-630M/-650/-650M 12 • Rugged construction. • Symmetrical sound dispersion. • Durable powder coating on the surface of horns ensures superb weatherproofing. Horn Speakers (for general use) IP-65 High input power handling for multiple application. Excellent for outdoor use. Durable construction. Long term reliable operation. Screws and bolts of stainless steel. TC-615 / 615M (15W) ø 400 376 Horn Speaker with 250~7,000Hz frequency response and 120dB (1m) sound pressure level for paging and BGM. TC-630 / 630M (30W) ø 500 463 Horn Speaker with 200~6,000Hz frequency response and 125dB (1m) sound pressure level for paging and BGM. Modell TC-615 TC-615M TC-630 TC-630M Rated Power Tappings 100V 15W --- 30W --- Rated Impedance Frequency Response SPL (1W, 1m) Dimensions Weight Other Features 8Ω 250Hz ~ 7kHz 108dB ø 400 x 376mm 3kg Weatherproof IP 65 15W 15W / 10W/ 5W / 3W --250Hz ~ 7kHz 108dB ø 400 x 376mm 3.2kg Weatherproof IP65 30W 30W / 15W/ 10W / 5W --200Hz ~ 6kHz 110dB ø 500 x 463mm 4.5kg Weatherproof IP65 16Ω 200Hz ~ 6kHz 110dB ø 500 x 463mm 4.1kg Weatherproof IP65 • Distribution pattern of horn speakers 300 200 • Typical Audible range Speaker Output 30W 100 500 m (m) 50W 100 Distance 75 dB 70 dB 65 dB 75 dB 70 dB 65 dB 316 m 562 m 1000 m 398 m 708 m 1259 m * 65 dB (Suburb Area) 70 dB (Town Area) 75 dB (Inner City) 200 300 SPL The above pattern is shown under ideal environment. (m) Air temperature and wind effect the pattern greatly 30W 50W 13 Paging Horn Speakers IP-65 Designed compact for easy handling. Stainless steel anti corrosion bracket is equipped. Color: Off-white. SC-610 / 610M (10W) SC-615 / 615M (15W) 222 188 234 179 161 172 max.120dB SPL (1m). max.124dB SPL (1m). SC-630 / 630M (30W) SC-650 (50W) 285 277 327 227 297.5 430 max.128dB SPL (1m). max.126dB SPL (1m). Can be mounted on Cars and Trucks for mobile use. Model SC-610 SC-610M SC-615 SC-615M Rated Input Tappings 100V Tappings 70V Low Impedance Frequency Range SPL (1W, 1m) Dimensions (WxHxD) Weight 10W ----8Ω 315 – 12 500Hz 110dB 172x161x188mm 1kg 10W 10 / 5 / 3 / 1W 10 / 5 / 2.5 / 1.5 / 0.5W --315 – 12 500Hz 110dB 172 x 161 x 188mm 1.2kg 15W ----8Ω 280 - 10 000Hz 112dB 222 x 179 x 234mm 1.1kg 15W 15 / 10 / 5 / 3W 15 / 7.5 / 5 / 2.5 / 1.5W --280 - 10 000Hz 112dB 222 x 179 x 234mm 1.3kg Model SC-630 SC-630M SC-650 Rated Input Tappings 100V Tappings70V Low Impedance Frequency Response SPL (1W, 1m) Dimensions (WxHxD) Weight 30W ----8Ω 250 – 10 000Hz 113dB 285x227x277mm 1.7kg 30W 30 / 15 / 7,5 / 5W 30 / 15 / 7.5 / 5 / 2.5W --250 – 10 000Hz 113dB 285 x 227 x 277mm 2kg 50W (mobile use: 30W) ----16Ω 250 – 6 000Hz 109dB 430 x 297,5 x 327mm 3.4kg Typical Connection of Low Impedance and High Impedance Speakers TC-630 SC-630 A-1061 (60W) TC-615M A-1061 (60W) or 8Ω A-1806 (60W) 4Ω Output Impedance or 8Ω 14 SC-630 8Ω TC-615M 670Ω ! 8Ω TC-630 TC-615M A-1806 (60W) 100V, High Output Impedance or SC-615M or SC-615M or SC-615M Projection Speakers For Indoor Use PJ-100W (10W) PJ-200W (20W) ø180 195 250 165 130 ø140 160 200 108 135 SPL up to 102dB (1m) SPL up to 108dB (1m) Wide range Speaker for announcements and music, easy to mount. For Outdoor Use Weatherproof polyurethane resin paint and impact-proof leightweight ABS resin enclosure, and the stainless steel brackets enable many years of outdoor use. Constant directivity coverage (90 degree in horizontal) for CS-154 and CS- 304. CS-64 (6W) 233 208 ∅ 168 224 ∅ 172 SPL up to 104dB (1m). CS-154 (15W) / CS-304 (30W) 366 272 230 IP-65, 90° horizontal constant directivity coverage. SPL up to 109dB (1m, CS154) resp. up to 113dB (1m, CS-304). Model PJ-100W PJ-200W Dyn. Cone Driver Rated Input Tappings 100V Frequency Response SPL (1W, 1m) Dimensions Weight 12cm 10W 10W / 5W / 2,5W / 1.25W 65Hz ~ 15kHz 92dB ø 140 x 195mm 1,8kg 16cm 20W 20W / 10W / 5W / 2,5W 50Hz ~ 20kHz 95dB ø 180 x 250mm 2,5kg Model CS-64 CS-154 CS-304 Dyn. Cone Driver Rated Input Tappings 100V Frequency Response SPL (1W, 1m) Dimensions (W x H x D) Weight 12cm 6W 6W / 3W / 1W 130Hz ~ 13kHz 96dB 233 x 224 x 208mm 1.5kg 12cm 15W 15W / 10W / 5W 150 Hz ~ 15kHz 97dB 366 x 230 x 272mm 2.8kg 12cm 30W 30W / 20W / 10W 120Hz ~ 15kHz 98dB 366 x 230 x 272mm 3.1kg 15 Box and Column Speakers Wall-Mounting Box Speakers BS-330 (3W) 173 BS-330T (3W) 173 101 195 195 101 81 81 Wall-mounting box speaker with 12cm cone speaker for BGM / paging. ABS resin enclosure. BS-677B / 677W (6W) Wall-mounting box speaker with 12cm cone speaker and attenuator for BGM / paging. ABS resin enclosure BS-677BT / 677WT (6W) 100 200 100 200 250 10 250 10 Wall-mounting box speaker with 12cm cone speaker for BGM / paging. Wooden enclosure with cloth grille. The T-models are equipped with attenuator. The “W”-type models are white and the “B”-type models are black. Column Speakers Metal Case Type Splashproof for outdoor use under roof eaves. Enclosure silver and black front grille. TZ-301 (30W) 141 84 167 TZ-205 (20W) 84 141 TZ-105 (10W) Column Speaker Directivity 141 1256 167 84 334 580 167 IP x4 Model BS-330 BS-330T BS-677B / 677W BS-677BT / 677WT Dyn. Cone Driver Rated Input Tappings 100V Frequency Response SPL (1W, 1m) Dimensions (W x H x D) Weight Attenuator 12cm 3W 3W / 1W 120Hz ~ 15kHz 91dB 173 x 195 x 101mm 790g – 12cm 3W 3W / 1W 120Hz ~ 15kHz 91dB 173 x 195 x 101mm 790g OFF, -12 / -6 / 0 dB 12cm 6W 6W / 3W / 1.5W / 0.8W 100Hz ~ 10kHz 91dB 190 x 250 x 100mm 1.4kg – 12cm 6W 6W / 3W / 1.5W / 0.8W 100Hz ~ 10kHz 91dB 200 x 250 x 100mm 1.41kg OFF, -12 / -6 / 0 dB Model TZ-105 TZ-205 TZ-301 Dyn. Cone Driver Rated Input Tappings 100V Frequency Response SPL (1W, 1m) Dimensions (W x H x D) Weight 2x 12cm 10W 10W / 5W 150Hz ~ 10kHz 90dB 167 x 335 x 141mm 3.4kg 4x 12cm 20W 20W / 10W 150Hz ~ 10kHz 93dB 167 x 580 x 141mm 5.1kg 6x : 12.7x17.8cm 30W 30W / 15W 160Hz ~ 10kHz 100dB 167 x 1256 x 141mm 12.9kg 16 Speaker for General Use BS-1030B / 1030W (30W) IPx4 290 • Aesthetically pleasing design blends in modern buildings and other facilities, such as boutique, restaurant and amusement park. • Cost-effective high power PA box speaker. • 2-Way bass reflex speaker. • Low impedance (8Ω) or high impedance (100V) selectable by rotary switch. • Splash proof according to IPx4. • Expanded installation options. Can be mounted horizontally or vertically: flush-mount wall/ ceiling, with or without mounting bracket on the wall. • Equipped with U-bracket. Optional wall and ceiling mounting brackets. 196 150 Model BS-1030B Enclosure Rated Input Impedance Tappings 100V Sensitivity Frequency Response Speaker Systems Ambient Temperature Grade of Protection Finish Dimensions(WxHxD) Weight Bassreflex Bassreflex 30W 30W 8 Ohm 8 Ohm 30W / 20W / 15W / 10W / 5W 30W / 20W / 15W / 10W / 5W 90dB (1W/1m) 90dB (1W/1m) 80Hz - 20000Hz 80Hz - 20000Hz 12cm dynamic cone speaker, 2,5cm balanced dome tweeter -10°C ... +50°C -10°C ... +50°C IP-x4 IP-x4 black white 196 x 290 x 150 mm 196 x 290 x 150 mm 2.5kg 2.5kg BS-1030W BS-1110W (10W) / BS-1120W (20W) Model BS-1110W BS-1120W Rated Input Impedanz Tappings 100V Sensitivity Frequency response Speaker Ambient Temperature Finish Dimensions(W x H x D) Weight Optional Mounting bracket 10W 4 Ohm 10W / 5W 90dB (1W/1m) 150Hz - 14000Hz 2 x 12cm -10°C ... +50°C white 180 x 360 x 100 mm 2.9kg YS-301,SP-410, WCB-12W TMB-1W, Stand: ST-16 20W 8 Ohm 20W / 10W 93dB (1W/1m) 150Hz - 20000Hz 4 x 12cm +2.5cm Tweeter -10°C ... +50°C white 180 x 720 x 106 mm 5.1kg YS-301 • For religious facilities, lecture rooms and school auditoriums. • BS-1110W with 2 x 12cm Cone Speaker and BS-1120W with 4x 12cm Cone speaker and dome tweeter. • Wide horizontal and narrow vertical dispersion angle. • Low impedance (4Ω/ 8Ω) or high impedance (100V). • Vertical array possible. • Mounting horizontally or vertically. Optional wall mounting brackets. Optional Accessories SP-410 SP-420 WCB-12 / WCB-12W TMB-1 ST-16 Adjustable wall/ ceiling mount bracket Colour: Silver Flush Mounting bracket for BS-1030 Wall-/ceiling Bracket Length: 177,5mm Max. Load: 3.5kg Colour: WCB-12: black, WCB-12W: white (not to be used with BS-1120) Table Mounting bracket (not to be used with BS-1120) Stand 17 High quality Sound Speakers FGM Speakers F-160G / 160GM F-160W / 160WM 2-Way Bass Reflex Speaker • Highly efficient,wide-range 2-way bass-reflex loudspeaker system. • 13 cm cone woofer with 90 mm magnet and 3 cm film diaphragm dome tweeter with 70 mm magnet. • Constant directivity 90º horizontal by 90º vertical dispersion tweeter horn. • Built-in separate overload protection circuitry for woofer and tweeter (F-160G/ F-160W). • Optional wall and ceiling mounting brackets • Available in dark gray (F-160G/F-160GM) or white (F-160W/F-160WM). 157 250 169 F-240G / 240GM F-240W / 240WM 355 210 2-Way Bass Reflex Speaker 226 • Highly efficient,wide-range 2-way bass-reflex loudspeaker system. • 16 cm cone woofer with 90 mm magnet and 3 cm titanium diaphragm dome tweeter with 70 mm magnet. • Constant directivity 90º horizontal by 90º vertical dispersion tweeter horn. • Built-in separate overload protection circuitry for woofer and tweeter (F-240G/ F-240W). • Optional wall and ceiling mounting brackets • Available in gray (F-240G/F-240GM) or white (F-240W/F-240WM) Optional Accessories Low Impedance Speakers Model F-160G / F-160W F-240G / F-240W System Rated Input Impedanz Frequency Response Cross-Over Frequency SPL (1W, 1m) Dimensions(WxHxD) Weight 2-Way 150W 8Ω 100Hz ~ 20kHz 4kHz 91dB 250 x 157 x 169 mm 3.3kg 2-Way 150W 8Ω 65Hz ~ 20kHz 4kHz 92dB 355 x 210 x 226mm 4.1kg Model F-160GM / F-160WM F-240GM / F-240WM System Rated Input Tappings 100V Frequency Response Cross-Over Frequency SPL (1W, 1m) Dimensions(WxHxD) Weight 2-Way 30W 30W / 20W / 10W / 5W 100Hz ~ 20kHz 4kHz 91dB 250 x 157 x 169mm 3.9kg 2-Way 30W 30W / 20W / 10W / 5W 65Hz ~ 20kHz 4kHz 92dB 355 x 210 x 226mm 5.5kg Mounting bracket WCB-12 / WCB-12W Wall/Ceiling Bracket • For F-160 Series • Length 177,5mm • Max. Load 3,5kg • WCB-12: black WCB-12W: white High Impedance Speakers ST-16 Floor Stand • Height 1130...1660mm • Max. Load 6kg • Colour: silver 18 WCB-24 / WCB-24W Wall/Ceiling Bracket • For F-240 Series • Length 333,5mm (271+62,5mm) • Max. Load 20kg • WCB-24: black WCB-24W: white CMB-31 / CMB-31W Wall/Ceiling Bracket • For F-240 Series • Length 141mm (80 +61mm) • Max. Load 8kg • CMB-31: black CMB-31W: white Ceiling speakers Flush Mount Speakers COM ø150 PC-644S (6W) 1.7k PC-643S (6W) 3.3k • 12 cm Speaker • Screw-in Installation • ABS resin baffle with aluminium net grille, off-white 13k • 12 cm Speaker • Screw-in Installation • ABS resine grille 6.7k PC-646R (6W) 191 PC-645R (6W) Ceiling 85 200 ø143 • 12 cm Speaker • Screw-in Installation • ABS resin baffle with aluminium net grille, off-white Ceiling • 12 cm Speaker • Screw-in Installation • ABS resine grille, off-white 85 PC-1864 (6W) Plastic grille with metal punched net Plastic grille and baffle PC-1867 (6W) Ceiling PC-1863 (6W) ø150 • • • • • Metal grille and baffle ø180 12 cm Speaker. Fast & easy installation with spring catches. Push-in connectors for speaker cables. In-/Out bridge connection. Off-white (RAL 9010) 121 Model PC-645R PC-646R PC-643S PC-644S Dyn. Cone Driver Rated Input Tappings 100V Frequency Response SPL (1W, 1m) Baffle Depth Ceiling hole ø Weight 12cm 6W 6W / 3W / 1.5W / 0.8W 100Hz ~ 12kHz 90dB ø 191mm 74mm 150mm 650g 12cm 6W 6W / 3W / 1.5W / 0.8W 100Hz ~12kHz 90dB ø 191mm 74mm 150mm 650g 12cm 6W 6W / 3W / 1.5W / 0.8W 100Hz ~12kHz 90dB 200 x 200mm 74mm 143mm 700g 12cm 6W 6W / 3W / 1.5W / 0.8W 100Hz ~12kHz 90dB 200 x 200mm 74mm 143mm 720g Model PC-1863 PC-1864 PC-1867 Dyn. Cone Driver Rated Input Tappings 100V Frequency Response SPL (1W, 1m) Baffle Depth Ceiling hole ø Weight 12cm 6W 6W / 3W / 1.5W / 0.8W 100Hz ~16kHz 90dB ø 180mm 110mm 150mm 650g 12cm 6W 6W / 3W / 1.5W / 0.8W 100Hz ~16kHz 90dB ø 180mm 110mm 150mm 655g 12cm 6W 6W / 3W / 1.5W / 0.8W 100Hz ~16kHz 90dB ø 180mm 110mm 150mm 650g 19 Fire Dome Speakers Surface-mount Speaker PC-1867F / PC-1867FC (6W) PC-2668 (6W) 5 ø156 ±3 110 63-91mm 116 ø180 Decke Die Einbaudose eignet sich für Ausschnitte von 63-91mm 92.5 ø260 • Metallic firedome construction prevents flame and smoke from spreading into ceiling installation. • 12 cm Speaker. • Easy installation with spring catches. • Push-in terminals for speaker cable (PC-1867F). • Ceramic-terminals (PC-1867FC). • Aluminium baffle. • PC-1867FC in accordance with British Standard BS5839 (Part 8). • • • • • • 12 cm Speaker. Easy installation with spring catches. Push-in terminals for speaker cable. In-/Out bridge connection. ABS Resin baffle. Mounting bracket for back box included. Model PC-1867F Model PC-2668 Dyn. Cone Driver Rated Input Tappings 100V Frequency Response SPL (1W, 1m) Baffle Ceiling hole Weight 12cm 6W 6W / 3W / 1.5W 100Hz ~16kHz 90dB ø 180mm ø 156 1.3kg Dyn. Cone Driver Rated Input Tappings 100V Frequency Response SPL (1W, 1m) Baffle Dimensions Weight 12cm 6W 6W / 3W / 1.5W / 0.8W 100Hz ~16kHz 90dB 260mm ø 260 x 92.5mm 650g • Setup Guide for Speakers Building Type Office Hospital School Supermarket Shopping Mall Gymnasium Ceiling type flat flat flat flat flat non-flat Recommended Speaker BS-330 PC-645R PC-644S PJ-100 PC-646R PC-1864 PJ-200 PC-643S PC-2668 BS-677 • Calculation for Amplifier and Speaker Power Amplifier Model Amplifier Speaker Output Total Input Total Quantity of Speaker 1W 3W 6W A-1031/A-1803 30W 30W 30 10 5 A-1061/ A-1706/ A-1806 60W 60W 60 20 10 A-1121/ A-1712/ A-1812 120W 120W 120 40 20 A-1724 240W 240W 240 80 40 12 m • Typical ceiling speaker arrangement 18 m 20 Situation : Office 18m x 12 m with 3m Ceiling height Purpose : Paging, BGM Solution : Speaker with 6m balance Please refer to page 32 Technical Column TZ-105 Church/Mosque non-flat F-160GM/WM TZ-205 F-240GM/WM TZ-301 BS-1110 / 1120 Wide-Dispersion Flush-mount Speakers Expanded listening coverage area through extra-wide dispersion characteristics. Easy installation. Various models and and accessories meet a wide variety of requirements. All materials are fire resistant in accordance with UL-94 V0. The back-can additionally prevents fire and smoke into the ceiling. F-2852C (60W) F-122C (30W) F-2352C (30W) 2-Way HiFi Speaker for high power applications e.g. for high ceilings (3...6m) • 16 cm speaker. • Diffusor for wide dispersion of high frequencies. • Metal back can. Equalizing Controlled Type Full Range Speaker. Cost effective if many speakers are installed. For medium ceiling height (2...4m). • Heat-Resistant back can. • Optimized for use with AC-120 Controller. Ideal for use with additional subwoofers. • Diffusor for wide dispersion of high frequencies. 2-Way HiFi Speaker for medium ceiling height (2...4m). • 12 cm speaker. • Diffusor for wide dispersion of high frequencies. • Metal back can. F-2322C (30W) Full range speaker according to UL- 94 V0 For medium ceiling heigt (2...4m). • 12 cm speaker. • Metal back can. • Flat grille. Model F-2852C Rated Input Continuous Program Impedance Tappings 100V Frequency Response SPL (1W, 1m) Finish Mounting hole Dimensions Weight 60W 30W 30W 30W 180W (8Ω) 120W (8Ω) 120W (8Ω) 120W (8Ω) 100V / 70V / 25V // 16Ω / 8Ω 100V / 70V / 25V // 16Ω / 8Ω 100V / 70V / 25V // 16Ω / 8Ω 100V / 70V / 25V // 16Ω / 8Ω 60W / 30W / 15W / 3W 30W / 15W / 5W / 1.5W / 0.8W 30W / 15W / 5W / 1.5W / 0.8W 30W / 15W / 5W / 1.5W / 0.8W 80Hz ~ 20kHz 80Hz ~ 20kHz 80Hz ~ 20kHz 80Hz ~ 20kHz 91dB 90dB 90dB 90dB Enclosure, Punched net: Steel Plate, Baffle Rim: Fire-resistant ABS Resin (UL-94 V0), White paint (rim and punched net) ø 250mm ø 200mm ø 200mm ø 200mm ø 280 x 227 (D) mm ø 230 x 200 (D) mm ø 230 x 229 (D) mm ø 230 x 229 (D) mm 5.1kg* 3.7kg* 3.7kg* 3.7kg* F-2322C F-2352C F-122C * incl. mounting accessories Sound Dispersion of Conventional Speakers Wide-Dispersion Speaker 21 Wide-Dispersion Flush Mount Speakers F-1522SC (6W) F-2352SC (6W) Cost-effective compact model for low power applications and medium ceiling height (2...4m). • Only 117mm mounting depth. • Flat front panel. • 10 cm full range speaker. 2-way wide range speaker with diffusor for low power applications and medium ceiling height (2...4m). • 12 cm cone woofer and dome tweeter. • Easy installation. • Diffusor for wide dispersion of high frequencies. • For use in ceilings having minimal depth. Model F-1522SC Rated Input Continuous Program Impedance Tappings 100V Frequency Response SPL (1W, 1m) Finish 6W 6W 18W (8Ω) 18W (8Ω) 100V / 70V / 25V // 16Ω / 8Ω 100V / 70V / 25V // 16Ω / 8Ω 6W / 3W / 1W / 0.5W 6W / 3W / 1W / 0.5W 80Hz ~ 20kHz 80Hz ~ 20kHz 88dB 89dB Punched net: Steel Plate, Baffle Rim: Fire-resistant ABS Resin (UL-94 V0), White paint (rim and punched net), Dust proof bag: artifical fiber, black ø 135mm ø 200mm ø 155 x 117 (D) mm ø 230 x 154 (D) mm 1kg 1.5kg Mounting hole Dimensions Weight F-2352C AC-120 Equalizing Speaker Controller • For the use with the F-122C. • The electronic controller’s equalizing and filter circuitry provide optimal balancing characteristics. • Two channels can be controlled plus one low output for an additional subwoofer system (e.g. FB-100 or HB-1). Model AC-120 Inputs Outputs (electronic bal.) 2x +4dBm (max.+20dBm) (electronic bal.) 2x +4dBm (max.+20dBm), 1x +4dBm (max.+20dBm) low out 20Hz ~ 20kHz < 0,05% < 94dB 482.6 x 44 x 297.5mm 230V, 50/ 60Hz 9VA 3.7kg Frequency Response Distortion Hum & Noise Dimensions (WxHxD) AC-Line Voltage Power Consumption Weight Accessories for Ceiling Speakers For F-Series: Back Can HY BC1 Tile Bar Bridge HY-TB1 For surface mount or pending For louvered ceiling support installation of flush-mount e.g. to reduce the load speakers 22 Trim Ring HY-TR1 For installation of flush-mount ceiling speakers in larger existing holes or for louvered ceiling support Anchor Hanging Bracket HY- AH1 For direct mounting to the ceiling with anchor bolt e.g. for a weak louvered ceiling Accessories Flush Mount volume controls Attenuators AT-12UP / AT-50UP / AT-12UPR / AT-50UPR AT-063P (6W) / AT-303P (30W) / AT-603P (60W) (for flush-mounting DIN 49037) • • • • AT-063P / AT-303P 70 AT-603P 32.8 70 3.85 35.9 model AT-603P INPUT CAPACITY 60W TOA Corporation MADE IN JAPAN 120 120 12-steps. Matching with GIRA switcher accessories. UPR-Version with priority relay. AT-12UP/ UPR 12W, depth: 26mm AT-50UP/ UPR 50W, depth: 40mm. • With covered label. • Colour: Off- white. • Five attenuation settings (OFF, 0/-6/-12/ -16dB), over an input range from 0.5W to 6W (AT-063P), 30W (AT-303P) or 60W (AT-603P). • Push-in connector (bridging terminal). • Matching wall mounting boxes: YC-301 (Flush-Mounting Back Box) and YS-11A (Surface-Mounting Back Box). OFF OFF Plate Plate 32.8 3.85 Accessories for PC-1800 Series Speakers Protection Cover YS-270A Attenuator ATT-311 Applicable speakers: PC-1864/1863/ 1867/2668. The Attenuator is mounted on the speaker’s rear. Input: 3W. • Dimensions for Fixing Hole: ø150mm. • Weight: 140g. • Finish: Cover; Heat-resistant ABS-resin, Black. Impedance Meter ZM-104 Fast detection of short circuits etc. • for easy and exact measurement of speaker line impedances. • Battery driven for mobile use (4 Mignon (AA) batteries). • 30 - 60 hours continuous use with one set of batteries. • Built-in 1kHz oscillator. • Range 5Ω - 100kΩ. • graphic conversion table impedance - power. • incl. a case and one set of test leads. 23 Mobile Amplifiers Car System CA-115 (max. 35W) / CA-130 (max. 60W) / CA-160 (max. 120W) • Easy installation for 12V battery equipped vehicle. • Compact and rugged. • Two microphone inputs and convenient auxiliary for tape recorder, radio,etc., connection. • Unidirectional dynamic microphone with talk switch. • Matching in DIN size car radio slot. When connecting one horn speaker 178 MIC 2 MIC 1 POWER MIC 2 AUX MIC 1 MIC 2 MIC 1 POWER MIC 2 0 10 0 10 50 MIC 1 50 AUX Model CA-115 CA-107 178 0 MAX 8mm 10 0 Model CA-115 CA-130 CA-160 CA-207 CA-407 144 CA-115 MIC 2 MIC 1 0 0 Speaker SC-615x2 SC-630x2 SC-650x2 SC-615 x 2 SC-650 x 2 SC-630 x 2 CA-160 Model CA-115 CA-130 CA-160 CA-207 CA-407 POWER MIC 2 10 Rated Input / Max 15W/30W 30W/60W 60W/120W 20W/30W 40W/60W When connecting four horn speakers in serial-parallel 50 MIC 1 BLK SC-630 CA-130 178 AUX Speaker SC-630 SC-615 WHT When connecting two horn speakers in parallel 10 MAX 8mm 132 Rated Input / Max 15W/ (max. 30W) 10W/(max. 15W) 10 Rated Input / Max 15W/35W 30W/60W 60W/120W 20W/30W 40W/60W Speaker SC-610x4 SC-615x4 SC-630x4 SC-610x4 SC-615x4 BLK BLK WHT WHT BLK BLK WHT WHT BLK BLK WHT WHT SC-630x4 MAX 8mm 170 Model CA-115 Power Supply Current Consumption Rated Power Impedance Distorsion Frequency Response Inputs 14V DC 14V DC 2.7A 4.4A 15W 30W 4Ω / 8Ω 4Ω / 8Ω < 5% < 5% 100 —10000Hz ±3dB 100 —10000Hz ±3dB MIC 1,2: -48dBV, 600Ω; MIC 1,2: -48dBV, 600Ω; AUX: -6dBV, 10kΩ AUX: -6dBV, 10kΩ Front: ABS-Resin, black; Case: Zinc plated Steel With talk switch, Impedance 600Ω, Sensitivity –73dB ±3dB, Cardioid 178 x 50 x 132mm 178 x 50 x 144mm 0.9kg 1.1kg Finish Microphone Dimensions(W x H x D) Weight CA-130 CA-160 14V DC 9A 60W 4Ω / 8Ω < 5% 100 —10000Hz ±3dB MIC 1,2: -48dBV, 600Ω; AUX: -6dBV, 10kΩ see CA-115 178 x 50 x 170mm 1.2kg Mobile Amplifiers with Cassette Deck CA-107 (max. 15W) / CA-207 (max. 30W) / CA-407 (max. 60W) 0 10 Max. 15.5 182 0 10 50 75 • Matching in DIN size car radio slot. • Built-in auto reverse cassette deck with pause function. • Equipped with muting system. • Unidirectional dynamic microphone with talk switch. 181,5 Model CA-107 Power Supply Current Consumption Rated Power Impedance Distorsion Frequency Response Inputs 14V DC 14V DC 2.7A 4.4A 10W 20W 8Ω 4Ω / 8Ω < 5% < 5% 100 —10000Hz ±3dB 100 —10000Hz ±3dB MIC 1,2: -48dBV, 600Ω; MIC 1,2: -48dBV, 600Ω; AUX: -6dB, 10kΩ AUX: -6dB, 10kΩ Front: ABS-Resin, black; Case: Zinc plated Steel With talk switch, Impedance 600Ω, Sensitivity –73dB ±3dB, Cardioid 181,5 x 50 x 132mm 181,5 x 50 x 144mm 0.9kg 1.1kg Finish Mikrofon Dimensions (W x H x D) Weight 24 CA-207 CA-407 14V DC 9A 40W 4Ω / 8Ω < 5% 100 —10000Hz ±3dB MIC 1,2: -48dBV, 600Ω; AUX: -6dB, 10kΩ see CA-107 181,5 x 50 x 170mm 1.2kg Portable Wireless UHF-Band WT-4810 WT-4820 Receiver Diversity Wireless Tuner for 2 UHF Modules • UHF system which ensures low noise interference. • Double Squelch and Diversity System supports a clear reception. • Good distance coverage from microphone to tuner (up to 150m on an open space). • 16 Channels. • Mixing input allows cascadation of several receivers (WT-4810). • Two built-in antennas (WT-4810). • Matching with WM-4210 / 4220 / 4310 / 4310A and WM-4310H microphones. Model WT-4810 WTU-4800 Power Supply Current consumption Receiving Frequency No. of Channels Indicators Dynamic range Distorsion Frequency Response Ambient Temperature Finish Dimensions(WxHxD) Weight 230V 50Hz (AC adaptor) 130mA (12V=) 794 - 865MHz 16 4 > 104dB < 1% 100 - 12 000Hz, ±3dB -10°C ... 50°C ABS Resin, black 240 x 35 x 110mm 390g 7-12V DC 100mA 794 - 865MHz 16 >80dB < 1% 100 - 12 000Hz, ±3dB -10°C ... 50°C Steel Case 60 x 25 x 139mm 130g • WT-4820 rack mountable with optional mounting brackets: MB-WT3 (for one WT-4820) or MB-WT4 (for two WT-4820 side by side). • WT-4820 accepts two optional wireless tuner modules WTU-4800. WTU-4800 UHF Tuner Module for WA-1822, WT-4820 and MX-628 Wireless Microphones WM-4210 WM-4220 WM-4310 WM-4310A WM-4310H Microphone (Speech & Vocal) Microphone (Speech) Lavaliere Microphone Aerobic Set , sweat resistant, Headset Microphone Model WM-4210 WM-4220 WM-4310 WM-4310A/ 4310H Microphone Capsule Frequency Response No. of Channels Battery Batteriy life time Indicators Antenna Ambient Temperature Finish Dimensions(WxHxD) Weight Accessories Dynamic, Cardioid 794 - 865MHz 16 9V (6LR61) >10h On, Battery Status integrated - 10°C ... 50°C ABS Resin coated ø50 x 235.2mm 250g (incl. Battery) Stand Adaptor, Etui Screw driver Electret Condenser, Cardioid 794 - 865MHz 16 9V (6LR61) >10h On, Battery Status integrated -10°C ... 50°C ABS Resin coated ø45 x 235.2mm 250g (incl. Battery) Stand Adaptor, Etui Screw driver Electret, Cardioid 794 - 865MHz 16 9V (6LR61) >10h On, Battery Status Herical Antenna -10°C ... 50°C ABS Resin coated 62 x 142 x 32mm 135g ( incl. Battery) Etui Screw driver Electret, Cardioid 794 - 865MHz 16 9V (6LR61) >10h On, Battery Status Herical Antenna -10°C ... 50°C ABS Resin coated 62 x 142 x 32mm 135g ( incl. Battery) Waist Pouch (WM-4310A) Screw driver Portable Amplifier WA-1822 / WA-1822C Meeting Amplifier with (WA-1822C) and without (WA-1822) Cassette with speaker and two optional wireless microphone channels • Ideal for mobile PA: Portable Amplifier for Schools, Conferences, Entertainment, etc. • Selectable source: AC or battery operation. • Battery status indication. • Rated power 20W and 2-way speaker. • Operation with wireless microphones with up to two optional tuner modules WTU-4800 (UHF) or WTU-3800 (VHF). • 2 built-in antennas. 25 Applicable room size Model WA-1822 / 1822C Power supply Rated power Power Consumption Frequency Response Distorsion Inputs Speaker S/N ratio Ambient Temperature Dimensions Weight Finish 230V~, 50 Hz or Dry cell: 8 x AC: 20W; Battery: 8W 44VA 70…10 000Hz < 1% 2 x MIC: -48dBV, 600Ω, AUX: -20dBV, 500kΩ 20cm Bass+ Horn or external: 8 - 16Ω min. 20W > 70dB 0 — 40°C 298 x 460 x 200 mm 6 kg white Application Class room Conference room Outdoor Church Gymnasium Room size 8 x 14 m 8 x 10 m 15 x 15 m 10 x 15 m 15 x 15 m VHF-Band WT-3810 WTU-3800 Receiver Tuner module for WA-1822/C • Double Squelch and Diversity System supports a clear reception. • Good distance coverage from microphone to tuner (within 150m at an open space). • 6 Channels. • Mixing input allows cascadation of several receivers (WT-3810). • Two built-in antennas (WT-3810). • Applicable Microphones WM-3210 / WM-3220 / WM-3310 / WM-3310H. Model WT-3810 WTU-3800 Power Supply Current consumption Receiving frequency No. of channels Indicators Dynamic Range Distortion Frequency Response Ambient Temperature Finish Dimensions(WxHxD) Weight 230V, 50Hz (AC Adaptor) 150mA (12V=) 169 - 216MHz 6 3 > 100dB < 1% 100 - 12 000Hz, ±3dB -10°C ... 50°C ABS Resin, black 240 x 35 x 110mm 380g 7-12V DC 100mA 169 - 216MHz 6 > 80dB < 1% 100 - 12 000Hz, ±3dB -10°C ... 50°C Metal 60 x 25 x 139mm 130g Wireless Microphones WM-3210 WM-3220 WM-3310 WM-3310H Microphone (Speech & Vocal) Microphone (Speech) Lavaliere microphone Headset Microphone Model WM-3210 WM-3220 WM-3310 WM-3310H Microphone Frequency Response No of Channels Battery Batter life time Indicators Antenna Ambient temperature Finish Dimensions(WxHxD) Weight Accessories Dynamc Cardioid 169 - 216MHz 6 9V (6LR61) >10h On, Battery Status integrated -10°C ... 50°C ABS Resin coated ø50 x 235.2mm 250g (incl. Battery) Stand adaptor, Screwdriver Electret Condenser, Cardioid 169 - 216MHz 6 9V (6LR61) >10h On, Battery Status integrated -10°C ... 50°C ABS Resin coated ø45 x 235.2mm 250g (incl. Battery) Stand adaptor, Screwdriver Electret Condenser, Cardioid 169 - 216MHz 6 9V (6LR61) >10h On, Battery Status Herical Antenna -10°C ... 50°C ABS Resin coated 62 x 142 x 32mm 135g ( incl. Battery) Screwdriver Electret Condenser, Cardioid 169 - 216MHz 6 9V (6LR61) >10h On, Battery Status Herical Antenna -10°C ... 50°C ABS Resin coated 62 x 142 x 32mm 135g ( incl. Battery) Screwdriver 26 Megaphones Hand-held Megaphones ER-510 / ER-510W / ER-510S (10W) ER-510 / 510W ER-510S • Compact, lightweight Megaphone with instant-on amplifier and howl-free dynamic microphone with Press-to-talk Switch. • Operates on 8 R6 type (AA) batteries. • Trumpet and Enclosure from ABS Resin. • Trumpet: white, strap black, others grey. • ER-510W with whistle. • ER-510S with Siren, Trumpet red. Model ER-510 ER-510W ER-510S Power Signals Audible Range Batteries Battery life (hours) with Signal Dimensions Weight (w/o Batteries) 10W approx. 250m 8 x 1.5V (R 6) 10 ø 160 x 260mm 620g 10W Whistle approx. 250m 8 x 1.5V (R 6) 10 30 Min. ø 160 x 260mm 650g 10W Siren approx. 250m 8 x 1.5V (R 6) 10 40 Min. ø 160 x 260mm 650g ER-1015 / ER-1015S (23W) ER-1015 • Compact, lightweight megaphone with instant-on amplifier and howl free dynamic microphone with Press-to-talk Switch. • Operates on 6 R14 type (C) batteries. • Sanitary antibacterial treatment. • Trumpet: white, strap black, others grey. • ER-1015S with built-in Siren. • enclosure: red (ER-1015S), Horn white, ER-1015: light blue. Model ER-1015 ER-1015S Power Signals Audible Range Batteries Battery life (hours) with Signal Dimensions Weight (w/o Batteries) 23W approx. 315m 6 x 1.5V (R 14) 14 --210 x 291 x 319mm 970g 23W Siren approx. 315m (500m Siren) 6 x 1.5V (R 14) 14 . 20 Min. 210 x 291 x 319mm 980g ER-1015S Schoulder Type Megaphones ER-2015 / ER-2015W (23W) ER-2015 ER-604W (10W) ER-604W • Power Megaphone with instant-on amplifier and howl free operation. Hand held dynamic microphone with Press-to-talk Switch. • ER-2015W with whistle. • Operates on 6 R14 type (C) batteries. • Sanitary antibacterial treatment. • Colour: Off-white. Model ER-2015 ER-2015W ER-604W Power max. Signas Audible Range Batteries Battery life Dimensions(mm) Weight (w/o Batteries) 23W approx. 400m 6x1.5V(R14) 9h 210 x 210 x 310mm 1.1kg 23W Whistle approx. 500m Whistle 6x1.5V(R14) 9 h / Signal 20 min. 210 x 210 x 310mm 1.1kg 10W Whistle approx. 160m 8x1.5V(R6)/ext. 12V Adaptor 10 h / Signal 30 min. 102 x 258 x 216mm 1.6kg • Compact Megaphone with hand held microphone. Howl free operation. • Connection of Microphone Headset (optional WH-4000A/4000H) or Hand-held microphone possible. For Standmounting, e.g. on ST-16. • Aux Input e.g. for CD. • Operation with 12 V adaptor (optional) or Battery. • Enclosure: white, Strap black. 27 Mobile PA System Powered Mixer MX-628 Compact sized 8-Channel Stereo-Mixer with built-in Amplifier • Featuring many functions and versatile expansion options for easy and fast setup. • For mobile or fixed installation e.g. in Clubs, Banquet Rooms or Schools, etc. • 6 Microphone Inputs with trim controls, 2 Stereo Inputs for CD or Cassette Player and 2 Speaker Outputs with 60 Watt each. • Slot for optional VHF/UHF Receiver Modules (WTU-3800/-4800) for the use with two Wireless Microphones ( 2x YW-3510 wireless antennae required). • One effect- and foldback control per channel. • Output level with 4 bargraph LED level meters. • Sum outputs with Bass- and Treble controls. Model MX-628 Microphone Inputs 6x: -66 ... -30 dBV, 600 Ohm, balanced, Input 1-4: XLR + Phone Jack, 5-6: Phone Jack Aux Inputs 2x: Stereo: -10 dBV, 10 kOhm, RCA Pin Jacks Effect-Input 1x: -10 dBV, 10 kOhm, Phone Jacks Speaker Outputs 2x 60 W, 4Ω, push-in terminal Outputs Line Out (L,R),Monitor,Effect: +4dBV, 600Ω, 6,35mm Phone Jack (unbalanced) Rec Out (L,R) -20dBV, 10kΩ, RCA Pin Jacks (unbalanced.) Frequency Response 20....20 000 Hz (+1, -3dB) (AUX In) Equiv. Noise ( 20...20000Hz BPF) < -120 dB Max. Gain 90 dB Equalizer 10 kHz ±10dB Treble, 100Hz ±10dB Bass Indicator 7 Segment LED meter (-20, -10, -6, -3, 0, +3, +6dB) Finish Steel plate, grey painted Dimensions(W x H x D) 450 x 169 x 418 mm Weight 13 kg Accessories (Option) WTU-4800 (UHF- Tuner module); WTU-3800 (VHF-Tuner module); YW-3510 (UHF&VHF-Antenna) Application Example WM-4210 F-160G/W F-160G/W SL-122 WM-4210 DM-1100 P-120D ST-302 SL-122M MX-628 ST-302 28 SL-122 P-120D SL-122M Cassette/ CD WTU-4800 x 2 2-Way SR Speakers 2-Way Speaker SL-122 / SL-152 520 600 Compact Integrated 2-Way Speaker System 380 460 310 310 • 30 cm (12”) woofer (SL-122 )/ 38cm (15”) woofer (SL-152). • Constant directivity 90º horizontal x 40º vertical dispersion high-frequency horn with piezo driver. • 240 W continuous program material power capacity. • Two 1/4” input phone jacks (in bridge out) for multiple speaker hookups. • Interlocking corners for stacking, plus bottom-mounted stand adaptor. • Rigid sealed-type enclosure with punched metal grille, plus heavy-duty carrrying strap. SL-222 846 2-Way Twin Woofer Speaker System 380 310 • Two 30 cm (12”) woofer. • Constant directivity 90º horizontal x 40º vertical dispersion high-frequency horn with piezo driver. • 240 W continuous program material power capacity. • Two 1/4” input phone jacks (in bridge out) for multiple speaker hookups. • Interlocking corners for stacking, plus buttom-mounted stand adaptor. • Rigid sealed-type enclosure with punched metal. grille, plus heavy-duty carrrying strap. ST-32 Speaker Stand Model SL-122 SL-152 SL-222 System 2-Way sealed 2-Way sealed 2-Way sealed, Twin woofer Continuous Program 240W 240W 240W Dispersion 90° x 40° 90° x 40° 90° x 40° Impedance 8Ω 8Ω 8Ω Frequency Response 70 Hz ~ 20kHz 70 Hz ~ 20kHz 50 Hz ~ 20kHz Crossover frequency 5kHz 5kHz 5kHz SPL (1W, 1m) 95dB 98dB 96dB Dimensions(WxHxD) 380 x 520 x 310 mm 460 x 600 x 310 mm 380 x 846 x 310 mm Weight 12.8kg 19.9kg 15.7kg Applicable Room Size Application Music Speech and Background Music MX-628 + 2 x SL-122 /ST-32 15 x 15 m 15 x 20 m MX-628 + 2 x SL-152 /ST-32 18 x 25 m 18 x 35 m 29 Open Conference System • Suplies DC Power to all units; lamp indicator. • Jack for microphone input, and AUX 1 & 2 input Jack for access to PA and BGM system. • Microphone, AUX 1, line (for conference unit’s built-in speaker) and chime (on chairman’s unit) volume controls. • Delegate’s unit simultaneous operation (1,2,4, or 6) and automatic mic-off setting (OFF/20-sec/40sec) switches. • Line 1 & 2 output connection terminals each for 35 conference units. • RCA pin-jack and phone-jack recording output terminals . • System expandable to 140 units by connection of 2 additional center amplifiers as expansion amplifier (35 units per expansion amplifier). TS-700 210 Center Amplifier AUX 1 MIC LINE LINE CONTROL MIC LIMITER 2 4 6 1 10 0 10 0 TIME OUT 20s OFF POWER 40s 93 0 10 AUX 2 CENTER AMPLIFIER TS-700 300 TS-701 Chairman’s Unit 393 59 147 LED TS-701 PRIORITY TALK Top View TS-702 Delegate’s Unit 170 393 59 147 LED • Removable gooseneck microphone and built-in speaker. • A ring-shaped LED on the microphone indicates that the microphone is on. • To prevent howling, the built-in speaker is turned off while the microphone is on. • Press-to-talk priority speech button activates chime and overrides delegate’s unit (TS-701 only). • Press-to-talk button. • Recording output mini-jack for connection to a recording device. • Multiple simultaneous chairman’s units operation possible. • 8P quick-lock type mini-DIN socket. • Connection cord supplied. TS-702 TALK Top View Model TS-700 TS-701 Power Requirements Power Consumption Input 220/230V AC, 50/60Hz (selectable) Max. 135W Mic: 600Ω, -60dBV, AUX 1; 10kΩ, -20dBV, AUX 2: 600Ω, -20dBV, unbalanced, phone jack, Line 1 & 2: 0dBV Recording; 10kΩ, -20dBV, unbal, phone jack, 2x RCA jack Line 1 & 2; 0dBV, unbalanced Speaker Restriction can be set to 1,2,4, or 6/Automatic Mic off Function; off, 20sec., 40sec., (selectable) Max. 70 units/Max. 35 units per line (max. 140 units when 2 expansion amplifiers connected 210 x 93 x 316mm Colored steel plate, Semi-mat black 3.9kg Power cord x 1 35V DC, under 30mA supplied from center amplifier -Gooseneck Microphone; Unidirectional electret condenser mic, -60dBV, with LED, detachable type/Line; 0dBV, unbal. Output Control Number of connectable Conference Units Dimensions (WxHxD) Finish Weight Standard Accessories Recording; 10kΩ, -20dBV, unbalanced, mini jack/Line; 0dBV unbalanced Internal Speaker; 130Ω, 200mW Speech button, Priority Button Speech Button -- TK-708A / TK-712A Extension Cable Carrying and Storage Case 30 -- 170 x 59 x 147mm (microphone excluded) Base; ABS resin, Semi-mat black/Speaker; Metallic brown 560g Connection cord 1m+ 2m (with 2x 8P quick lock type miniDIN plugs and 1 socket) x 1 YR-700 For connection of a TS-700 expansion amplifier or the connection of two conference units. 1m + 10m long. TS-702 TK-708A For 1 Center Amplifier, 8 units and the cables. TK-712A For 12 units and the cables. AR-71 • Long-term recording without a break is possible. • Uses C-60 or C-90 type tapes. • Built-in AGC keeps recording level constant. • Deck-1 for recording and Deck-2 for recording and playback. • External mic input. • Headphone recording monitoring. • Mountable on EIA-standard rack using optional YM-003B kit. • Buzzer/LED tape end warning signals. Protocol-Recorder 1 2 AR-71 POWER REC LEVEL ON TAPE C90 STOP OFF C60 REC PAUSE PLAY STOP PLAY ALARM MIC PHONES 140.5 433.5 346 Model AR-71 Power supply Power Consumption Inputs Outputs Frequency Response Distorsion S/N ratio Wow and Flutter Recording Overlap Dimensions(W x H x D) Weight Finish AC 230V, 50Hz 12W MIC -62dBV, 600Ω; Line -20dBV, 50kΩ unbalanced Line 0dBV, 600Ω, unbalanced Cassette 100Hz - 7kHz, MIC 100Hz - 15kHz <2% >50dB <0.1% WRMS 60 ±5 Seconds 434 x 141 x 340 mm 8.1kg black System Example max. 100m AR-71 Protocol Recorder TS-701 Chairman’s Units TS-702 TS-701 ) TS-702 Delegate’s Units TS-700 Central Amp REC OUT Line 1 Max. 70 Units Microphone MIC IN Line 2 AUX 1 TS-702 CHANNEL OFF 10 0 10 1 0 F 2 E 3 4 5 DC B ANT A AF PEAK TS-702 POWER B 6 7 8 9 A DIVERSITY WIRELESS TUNER WT-4810 YR-700 Cable UHF Microphone System Amp BS-1030 Speaker YR-700 Cable VOLUME 0 TS-702 max. 100m TS-701 TS-700 Expansion Amp Line 1 Line 2 Line 1 Line 2 TS-702 ) TS-702 Max. 35 Units F-160G Speaker Max. 35 Units TS-700 Expansion Amp External PA-System TS-702 Delegate’s Units System Expansion Information Connectors XLR Connectors XLR-3-13 Panel Jack, round Female (F) XLR-3-11C XLR-3-31 Panel jack, rectangular Male (M) XLR-3-12C XLR-3-32 Panel jack, rectangular XLR-3-14 Panel Jack, round Phone Plugs DIN Connectors 5 P DIN Plug 8P DIN Plug Phone Plug (Unbalanced) Phone Plug (Balanced) 31 TECHNICAL COLUMN MICROPHONES Wiring of microphones Output from a microphone is rather weak; therefore, it is important to use shielded cable for microphones to prevent line noise. The low impedance shielded cable intended for microphones are commercially available. The shielded cable is generally used to transmit the audio signals from microphones ( -70 dB/0.3mV) or source equipment (0dB/1V). balanced output, and single-cored shielded cable is used for connecting unbalanced output. (a) Balanced Connection Microphone cord (double-cored shielded cable) HOT Microphone COLD Balanced and unbalanced type Signal (HOT) COM or ground Unbalanced microphone plug COM or ground (b) Unbalanced Connection Signal (COLD) Signal (HOT) (HOT) Balanced microphone plug Balanced amp. input Balanced and unbalanced output There are two kinds of output from a microphone: balanced and unbalanced. With balanced output, the audio signal appears between the hot (on-going audio signal) and cold (return audio signal), which are both independent of the ground. With unbalanced output, the audio signal appears between the hot and ground (connected to the cold). The connection between balanced output and balanced input (on the amplifier side) is virtually unaffected by external line noise, and it is used for wiring between long distances. Double-cored shielded cable is used for connecting (G) Microphone cord (single-cored shielded cable) HOT Microphone Unbalanced amp. input (COLD) Shielded cable (double core) COLD (G) Connection to microphone body (HOT) Shielded cable (single core) Amplifier HOT COLD (G) Amplifier HOT COLD (G) Distance of extension for microphone cords The following table shows the maximum extension distance for microphone cords. When distance extends beyond the following figures, exessive noise will make the microphone impractical,and therefore it will be necessary to use a microphone pre-amplifier to boost the signal level to minimize the influence of noise. Microphone output Amplifier input Unbalanced Balanced Balanced Unbalanced Unbalanced Balanced Microphone cord extension distance 20m 20m 80m Speakers Rough guide for noise levels and audio levels necessary for loudspeaker (for all types of speakers) Noise levels are expressed in decibels (dB). Below are some typical examples. Noise level (dB) 50 Inside a movie theatre Normal office, restaurant, hotel lobby 80 70 60 90 The SPL (1W/1 m) indicates the sound pressure level at a point 1 meter away from a speaker when an alectric input of 1 W is applied to that speaker. This is used to express comparative speaker efficiency, such as in a catalog. Attenuation of SPL due to distance (amount of attenuation = 20 log D D: distance in meters from speaker) Noisy office, department store, super market Printing plant Heavy- industry plant Can be undestood speaking in a normal voice Must raise one’s voice to be understood Must yell just to be heard When transmitting voice or music through a speaker, it is necessary to transmit at a level that is higher than the ambient noise level. In the case of voice transmission, it should be transmitted at a level 5 to 10 dB higher than the noise level, background music 3 to 5 dB higher, and foreground music 15 to 20 dB higher. Computation of intensity of sound As an index to express the intensity of sound from a speaker, sound-pressure level (in dB) is generally used. The soundpreassure level rises as the electric input to the speaker increases, and falls as distance from the speaker increases. This relationship is shown by the following formula: 32 Attenuation of SPL Amount of increase of SPL (dB) = SPL (1W/1m) + due to distance SPL due to electric input Distance (m) Amount of attenuation (dB) 2 6.0 5 10 15 20 30 40 60 80 100 14.0 20.0 23.5 26.0 29.5 32.0 35.6 38.1 40.0 Increase of SPL due to electric input (amount of increase =10 log W W: electric input) Electric input (W) 1 1.5 3 5 6 10 15 Amount of 0 2.6 4.8 7.0 7.8 10 11.8 increase (dB) 20 30 13 14.8 50 17 Example of calculation: The SPL(1w/1m) of the model SC-615M is shown as 112 dB. The soundpressure level of this model at distance of 10 meters with an input of 10 W can be calculated as follows according to the above table: SPL = 112 dB - 20 dB (10m) + 10 dB (10W) = 102 dB Arrangement of speakers in a general office (Ceiling speakers) Ceiling-mounted speakers are generally used, and their coverage angle is between 90 and 120 degrees. The smaller the distance between speakers, the better the sound quality and the more even the sound volume. The following table shows the area that can be covered by one speaker. Distance between speaker 90 - 120° Height of ceiling Height of ears 1.4 m Area of coverage of one speaker Purpose Height of ceiling Background music Less than 2.5 m 2.5 - 4.5 m 4.5 - 15 m Distance between speakers 6m / 5 m 7m / 6 m 10m / 8 m 9 to 12 m Announcement Artea of coverage of one speaker About 36 / 25 m2 About 49 / 36 m2 About 100 / 64m2 81 to 144 m2 For general office use without background music, speakers should be arranged about 5 to 6 meters apart. Shown below is an example of speaker arrangement in a 12 m x 18 m office with ceiling height of 3 m, which indicates that this office requires about 6 speakers. Arrangement of speakers in a factory (Horn speakers) Factories with high noise levels generally use horn speakers, which can produce high levels of sound. If you know where people are working in the factory, speakers are best arranged to cover such locations. If that is unknown, speakers should be arranged in accordance with the floor space. Here is an example of a 40 m x 90 m room in factory with a noise level af 85 dB. In this factory, SC-615M speakers are installed; therefore, the sound pressure that can be obtained at a point 20 meters away with electric input of 15 W will be: [112 dB (1W/1m) - 26.0 dB (20 m) + 11.8 dB (15 W)]=97.8 dB This is a sufficient sound pressure level, 10 dB higher than the noise level. The speakers are installed 20 to 30 meters apart, and 6 speakers can generally cover the area.The sound pressure level near speakers is rather high, so it is necessary to install the speakers at a height of more than 4 meters. SC-615M rated input 15W 40 m Arrangement of speakers Example of arrangement 97.8 dB 15 m Noise level of 85 dB (neccesary sound-pressure level of 95 dB) 30 m 15 m Speaker wiring For speaker connections, use 600V vinyl (PVC) insulated wire of 1.2mm to 1.6mm in diameter (AWG17 to AWG 14) Number of speakers : 6 12 m 30 m 90 m Office of 12 m x 18 m with 3 m ceiling height, without music 18 m Amplifiers High-impedance connection and low-impedance connection The PA amplifiers generally come with low-impedance speaker outputs (indicated as 4 Ω, 8 Ω, 16 Ω, etc) and high-impedance outputs (indicated as 70V, 100V, etc). Low-impedance output is used when a small number of speakers (1 to 4) is used and there is a short distance (10-some meters) between amplifiers and speakers. High-impedance output, is used with a large number of speakers and a long distance of wiring. Speakers with transformers are used for high-impedance output. For a PA system. high impedance connection should be used if possible, in consideration of wrong speaker connections and transmission efficiency. Example of low-impedance connection: It is necessary to design the total speaker input impedance to be larger than or equal to the amplifier’s output impedance. Else unstable operation or amplifier malfunction may result. The wiring distance between amplifier and speaker should be less than 10 meters. If the wiring distance is longer than this, the output power from the amplifierwill be consumed as heat in the cables, and not be able to supply the speaker with sufficient power and may result in a loss of sound quality . 4Ω Output 4Ω In high-impedance connection, as long as you have parallel connection it will be sufficient to design the total speaker input power to be equal or lower than the amplifier’s output power, and this will help to eliminate a complex impedance calculation. 100 V Output 60W 1 kΩ H 10W (10W/ C 100V line) 1 kΩ H 10W (10W/ C 100V line) 1 kΩ H 10W (10W/ C 100V line) Speaker input impedance (10W/100 V line) 100 (V)2 Z= = 1 kΩ 10 (W) Total impedance of Amplifier output speakers impedance 1 2 Z= = 167 (Ω) 100 (V) 1 + 1 + 1 + 1 + 1 + 1 Z= = 167 (Ω) 60 (W) 1 k(Ω) 1 k(Ω) 1 k(Ω) 1 k(Ω) 1 k(Ω) 1 k(Ω) Amplifier output power 60 W = total speaker input power (60 W) Even when connecting speakers with different input power, there will be no problem as long as the total wattage of the speakers does not exceed the amplifier output power. H 4Ω Output Example of high-impedance connection: In a PA system covering a large area, the wiring distance will be greater, so high impedance connection is used predominantly. In a high-impedance connection,all speakers (each with a transformer) will be connected in parallel. Avoid using these speakers together with those without transformers. C Total impedance H of speakers 8Ω C 4Ω H 8Ω H Total impedance 8Ω Output of speakers 8Ω 8Ω 8Ω 1 1 + 8Ω 8Ω 120W H 8Ω C H C H 8Ω C 4Ω = C 100 V Output 1 C 8Ω = 1 1 1 + 8Ω + 8Ω 8Ω + 8Ω Amplifier output impedance 100 (V)2 Z= = 83 (Ω) 120 (W) 1.7 kΩ H 6W 6W 6W 1.7 kΩ H 1.7 kΩ H 330Ω (6W/ C 100V line) (6W/ C 100V line) (6W/ C 100V line) H (30W/ C 100V line) 30W 30W 330 Ω H (30W/ C 100V line) Total impedance of speakers Z= 1 1 + 1 1.7 k(Ω) 1.7 k(Ω) + 1 + 1 1.7 k(Ω) 330 (Ω) + 1 = 128 (Ω) 330 (Ω) Amplifier output power 120 W > total speaker input power(78 W) 33 Application Example 2 OFFICE 30m Ceiling Speaker AT-12UP Executive Offices EC-100M A-1031 Meeting Room 5m 15m 5m Reception Office Area • • • • Emergency paging possible (5m distance among the speakers). Announcements with chime from the receiption. One speaker for each room. Individual adjustment of the volume in each office room. Ceiling speakers A-1031 CD MIC 1 MIC 2 MIC 3 AUX 1 AUX 2 BASS TREBLE MASTER POWER Volume Control RADIO TUNER PA AMPLIFIER model A-1121 AT-12UP AT-12UP 1.5 W 1.5 W x1 Receiption EC-100M AT-12UP AT-12UP 1.5 W x6 one per office 1.5 W AT-12UP 1.5 W x2 Meeting room 1.5 W 1.5 W x7 Staff area GYMNASIUM 32m AT-12UP Ceiling Speaker EC-100M Change Room F-240WM/GM Gymnastic Area A-1121 and A-1061 20m • Good sound quality. • Wireless microphones for the instructor. • Announcements from the reception. Resting Area Reception WT-4810 AerobicsMicrophone WM-4310A 30W A-1121 MIC 1 PA MIC 2 AMPLIFIER MIC 3 AUX 1 AUX 2 BASS TREBLE MASTER POWER TREBLE MASTER POWER 30W F-240WM/ F-240WM/GMGM x 4 Gymnastic Area model A-1121 CD / Cassette A-1061 MIC 1 MIC 2 MIC 3 AUX 1 AUX 2 BASS 3W 3W 3W 3W Cassette PA EC-100M 34 AMPLIFIER model A-1121 Ceiling speaker x 11 Changing room / resting area Ceiling speaker x 2 Receiption Application Example 3 About TOA Mosque / Club House etc. 18m EM-400 Since it’s foundation in 1934 the TOA Corporation had a leading effect upon the development of the acoustic and communication technology. Among others TOA invented the Reflex Horn as well as the Transistor Megaphone. Several patents and state of the art products stand for an unequalled innovative company. DM-1300 TZ-205 or BS-1030B A-1121 TOA operates in more than 100 countries worldwide. This branch, TOA Electronics Europe, is responsible for the sales and distribution of TOA Products throughout mainland Europe, Middle East and Africa. TOA products range from amplifiers and speakers used in foreground and background music systems, to mixers, wireless microphone systems and digital processors used in sound reinforcement, to intercom security systems. This catalogue offers a selection of products from these ranges - Public Address - Professional Sound System 10m • Background music inside. • Separate outdoor sound (e.g. from minaret or paging during a competition, etc.). • Separate volume controls for indoor and outdoor. for the design of small up to intermediate sized sound systems. OFF DM-1300 A-1061 EM-400 MIC 1 MIC 3 AUX 1 TZ-205 AUX 2 BASS TREBLE MASTER POWER 10 8 6 ON 4 10 0 For further information for the design of intermediate to large sound systems please contact your local dealer. Such systems are built-up with the Venas and Smart Matrix systems components. Dedicated to security applications the VX-2000 series fulfills the EN 60849 standard. A basic demand in any kind of security application is a high grade of intelligibility. And a good sound quality is an essential condition for it. MIC 2 10 0 PA AMPLIFIER 10 0 10 0 10 0 0 -10 OFF 2 +dB 0 -10 10 0 model A-1121 REC. OUT A-1061 MIC 1 MIC 2 AUX. IN MIC 3 AUX 1 AUX 2 BASS TREBLE MASTER POWER 10 TC-630M e.g. for Minaret 8 6 ON 4 0 10 PA AMPLIFIER 0 10 0 10 10 0 0 -10 10 0 OFF 2 +dB 0 -10 0 10 model A-1121 Church 20m DM-1300 Sound quality and safety are part of our concept: safe & sound. WM-4310 BS-1030W + WCB-12W or BS-1110 / BS-1120 A-1121 (120W) Cassette / CD 15m • Good sound quality. • Clear and intelligible speech transmission • Wireless microphones for free movement. OFF DM-1300 A-1121 OFF DM-1300 MIC 1 MIC 2 MIC 3 AUX 1 AUX 2 BASS 30W TREBLE MASTER 30W POWER 10 8 Smart Matrix SX-1000 Series Venas VX-2000 Series 6 Venas VM-2000 Series ON 4 10 0 PA Lavaliere Microphone WM-4310 Cassette / CD 0 AMPLIFIER 10 0 10 0 10 0 10 -10 0 -10 0 2 +dB 0 OFF 8 10 model A-1121 BS-1030W WT-4810 PC-643S PC-644S BS-677B / 677BT BS-677W / 677WT F-160G / 160GM F-160W / 160WM F-240G / 240GM F-240W / 240WM PC-645R PC-646R PC-1864 PC-1867 / PC-1863 PC-2668 BS-1030B BS-1030W BS-330 / 330T Packaged Audio Products ef www.toa.de © TOA Electronics Europe GmbH (0803) 833TEEC076 Specifications are subject to change without prior notice. Errors excepted.