Log into computer. Guest must obtain a username and password from IT to log into our network, pick up the phone and dial# (5734)
Push “Power ON” button on the smartboard it may take a moment for the projector to turn on and warm up. The power button is the large gray button located below the smartboard
Turn the TOA amplifier “ON” inside the lectern
Turn black knob on small tan colored switchbox inside lectern to “Computer”
Log into computer. Guest must obtain a username and password from IT to log into our network, pick up the phone and dial# (5734)
Push “Power On” button on the projector remote it may take a moment for the projector to turn on and warm up
To play a video on your smartboard press the video button located on the panel below the smartboard and follow the DVD/VHS instructions
………………………………………… More Tips
Do not use regular Dry Erase markers on your smartboard they will not work and can damage the surface of the screen
Turn black knob on small tan colored switchbox inside lectern to “Computer” Or Press small gray button on blue switchbox until a green light displays next to appropriate label.
Or Press small gray button on blue switchbox until a green light displays next to appropriate label.
Turn the TOA amplifier “ON” inside the lectern
Push “Computer” source button on projector remote for display to show up on the projection screen
………………………………………… More Tips
Turn large volume knob on amplifier to adjust volume
Make sure your volume is not muted on the computer
Push “Power” button on the DVD/VCR combo player
Push “Power On” button on the projector remote it may take a moment for the projector to turn on and warm up
Turn the TOA amplifier “ON” inside the lectern
Push “Video” source button on projector remote for video to show up on the projection screen. Or if using a smartboard press the “Video” button below the smartboard
Place DVD or VHS tape into the combo player. Use the DVD/VHS remote to play the video
………………………………………… More Tips
Turn large volume knob on amplifier to adjust volume
Turn “Power” switch on the Elmo to the “On” position which is located on the top right corner of the Elmo
Push “Power On” button on the projector remote it may take a moment for the projector to turn on and warm up
Turn black knob on small tan colored switchbox inside lectern to “ELMO” Or Press small gray button on blue switchbox until a green light displays next to appropriate label.
Push “Computer” source button on projector remote for display to show up on the projection screen
………………………………………… More Tips
Use the Zoom control on the Elmo to zoom accordingly and the Auto focus to make your document legible