Transcript
Pan/Tilt Head Mounting Accessories Ref.# 54192
MA-WMBKT Adjustable Wall Mounting Bracket Use with PT-CP-S2: ADJ-WMBKT-15 (X=15”) Use with PT-HP-S2: ADJ-WMBKT-20 (X=20”) 4.50"
Pan/Tilt Cable Access Hole
P/T Mounting Plate
4.50"
ADJ-WMBKT
3.75"
Cable Access Hole 3.75"
X 4 holes 0.265" dia.
P/T Mounting Plate (Ref.# 54184) "A" holes mount adapter plate to P/T using ¼-20 x ½" flathead screws. "B" holes mount adapter plate to P/T head at 45° angle.
Wall Mounting Pattern Note: Holes without dimensions used for Elevating Wall Mount.
A B
Wall Mounting Bracket
B
A
P/T Mounting Plate
A
45° 45°
B
B A
Center of Field of View
Install 8-32 x 5/16 screws 4 places
Caution Weight - 5 lbs. (15”), 6 lbs. (20”) Total Load - 50 lbs. Mounting - Upright or Inverted
Hardware Supplied: (4) ¼ - 20 x ½" FH Soc Cap Screws (4) 8-32 x 5/16 Soc Cap Screws
Ref.# 50111
Due to variation of wall and ceiling construction hardware for mounting the bracket to the wall is not provided. Exercise care when securing bracket. Installation should be verified for proper fastening and safety.
Ref.# 50113
MA-MTGFLG Pan/Tilt Mounting Flange
MA-EXT-XX Pipe Mounting Flange Extension Pipe (1” Threaded) Available in 3", 6", 12” and 24" lengths.
3" Dia
4"
13/16"
Hardware Supplied (to mount to P/T): (4) ¼ - 20 x ½" flat head screw
Specifications and features subject to change without notice. 10/10 printed in U.S.A. Eng.# 50111, 50113, 54192, 55929, 55967
6 Leighton Place Mahwah, New Jersey, U.S.A. 07430 Phone: (201)848-9818 Fax: (201)848-9819 www.telemetricsinc.com
Weight (w/2 flanges): 3” 2.5 lbs. 6” 3.0 lbs. 12” 3.5 lbs. 24” 5.5 lbs.
Pan/Tilt Head Mounting Accessories MA-SHFBKT-SLIDE Pan/Tilt Shelf Mounting Bracket
Ref.# 55929
.265 Dia-Thru 4 Holes
7" 6
3½"
Pan/Tilt
3 4
5
2"
4"
5"
¼"
2.5"
2
1
8"
Hardware Supplied 1. (1) Shelf Mounting Bracket 2. (2) Guide 3. (1) Pan/Tilt Mounting Plate Hardware Supplied: 4. (4) 8-32 x 5/8 Phillips Flat Head Screw 5. (4) 8-32 x ½ Phillips Pan Head Screw 6. (4) ¼ - 20 x ½ Phillips Flat Head Screw Ref.# 55967
MA-WMBKT-LP PT-LP Wall Mounting Bracket Wall Mounting pattern 6.0
TALLY PROMPT CC1
TALLY PROMPT CC1
5.0
EXT/CC
EXT/CC
LENS
LENS
3 (x6)
CAMERA
CAMERA
VIDEO
VIDEO
MTG HARDWARE NOT SUPPLIED
GENLOCK
PT-LP-S3
VIDEO PROMPT
GENLOCK
GENLOCK
3(x6)
5 VIDEO
SERIAL
6.0
PT-LP-S3
ETHERNET POWER
PROMPT
GENLOCK AUX
SERIAL
ETHERNET POWER
4 (x6)
AUX
5.0
6 (x6)
.390 DIA
1 4 (x6)
.50
Dimensions in inches.
2
15.00
4 HOLES .390 DIA
3.75
19.25
Hardware Supplied 1. (1) Plate adapter 55963 000. 2. (1) Welding-Wall Mounting Bracket assembly 55964 000. 3. (12) ¼ - 20 x 1 Socket Head Cap Screw. 4. (12) ¼ - 20 Split Lock Washer. 5. (1) Safety lanyard, 1 ft length 6. (6) ¼ - 20 Nut
Caution Due to variation of wall and ceiling construction, hardware for mounting the bracket to the wall is not provided. Exercise care when securing bracket. Installation should be verified for proper fastening and safety.
Installation Instruction Install the PT-LP Wall Mounting Bracket in the desired place making sure that the installation is secure and verified for proper fastening and safety.
Mounting Instructions: 1. Mount plate 55963 000 to Pan/Tilt Head PT-LP-S3 92 54757. 2. Mount Welding-Wall Mounting Bracket assembly 55964 000 and safety lanyard 30745T15 to a wall. 3. Mount Pan/Tilt PT-LP-S3 assembly and other end of safety lanyard to Welding-Wall Mounting Bracket assembly 55964 0000.
Specifications and features subject to change without notice.
6 Leighton Place Mahwah, New Jersey, U.S.A. 07430 Phone: (201)848-9818 Fax: (201)848-9819 www.telemetricsinc.com
