Transcript
PA N D U I T ™ N E T- A C C E S S ™
CABINET
An Engineered Solution to Manage, Protect, and Showcase Your Network Investment From the World Leader in Cable Management Systems
PANDUIT is a Technology Developer Partner for Storage Networking Hardware.
Cabinet Innovation – Designed Specifically for Network Network management, security, availability and accessibility are key factors affecting data centre design and operation. In the past, network designers had to choose between the security and aesthetics of a cabinet or the accessibility and cable management of an open rack. Historically, cabinets offered limited cable management and accessibility, restricted airflow to equipment, and required complex grounding. PANDUIT ™ has revolutionised the network cabinet, offering an integrated solution to address all of these needs. The NET-ACCESS ™ Cabinet manages, protects, and showcases your network by combining the aesthetics and security of a cabinet with the accessibility of an open rack. The NET-ACCESS ™ Cabinet provides superior accessibility to the cable pathway, improves thermal management by controlling airflow to network equipment, and is fully electrically bonded to facilitate proper grounding. The modular design incorporates flexibility for future network expansions resulting in greater network uptime, plus easier moves, adds, and changes for the lowest total cost of ownership.
Superior Cable Management
2
Inset Structural Frame
Dual Hinge Door
Modular Cable Management
The NET-ACCESS ™ Cabinet design has inset frame posts, creating large and accessible vertical pathways for routing cables. When cabinets are ganged together, a large centre pathway is created providing unobstructed access to cables and equipment. These features make moves, adds, and changes easier than ever before, increasing network availability and saving money.
The NET-ACCESS ™ Cabinet features an innovative dual-hinging cabinet door, which provides unobstructed access to network cables and equipment. Adjacent cabinet doors can open to the left or right, providing complete access to both cabinets simultaneously. Moves, adds, and changes within the cabinet are easier than ever.
The NET-ACCESS ™ Cabinet includes modular cable management finger sections that easily mount to the front or back of all four cabinet posts. This design provides the ultimate in modular cable management and accessibility, speeds installations, and improves aesthetics to showcase your network investment.
Switching and Patching Applications Thermal Management The NET-ACCESS ™ Cabinet has been designed to optimise the thermal performance of network switches requiring side-to-side airflow. This cabinet ensures the industry recommended 15cm clearance between equipment and cabinet walls by properly routing cables away from ventilation pathways. Door perforations are optimised allowing unobstructed ventilation paths to provide maximum airflow to equipment. Optional ducting for higher heat density directs exhaust air to the hot aisle to prevent recirculation into the inlet.
Integrated Grounding System The NET-ACCESS ™ Cabinet features a fully integrated, electrically bonded structure to maximise uptime, maintain system performance, and protect network equipment and personnel. Built-in grounding features include all welded construction, special bonded rail mounting, conductive door hinges and a unique side panel mounting system. The NET-ACCESS ™ Cabinet System is compatible with
PANDUIT ™ STRUCTUREDGROUND™ Grounding System. Kits are available to bond the cabinet to the Common Bonding Network (CBN) and to ground all installed network equipment.
3
N ET -A CCESS ™ Cabinet Features
1 Large, Accessible Cable Pathways
6
• Vertical cable pathway design is optimised to provide unobstructed access to cabling for easy moves, adds and changes
2
10
Dual Hinge Door • Door can be opened 180° to the left and right enabling complete unobstructed access to adjacent cabinets and pathways
1
2 3
3 Modular Cable Management • Cable management finger sections can be located where needed, on front and back of all four posts, to manage cables for greater routing flexibility • Cable management fingers align with rack spaces to ensure proper bend radius control and support cables as they transition to the vertical pathway
4
Thermal Management • Inset cabinet frame posts and superior cable management ensure clear pathways and create large area for airflow to provide proper heat dissipation • Optional air ducts provide exhaust channels for equipment with high heat density applications
5
Grounding and Bonding • Entire cabinet is fully electrically bonded, including equipment rails, doors, and side panels for protection of equipment and personnel • STRUCTUREDGROUND™ Grounding System provides simple and convenient grounding for the entire cabinet
4
4
7 6 8
6 Routing Options for Overhead/Under Floor Cabling
6
• Knockouts in the top allow multiple options for overhead cable routing to provide flexibility and scalability
10
• Large bottom openings provide pathways for routing of cables from under floor
2
7 Adjustable Rails for Equipment Mounting • Front and rear rails are easily and fully adjustable to accommodate a variety of equipment mounting requirements • Printed rack space identification on rails provides for quick and easy installation of equipment
8 3
Easily Accessible Levelling Legs • Levelling legs can be safely and easily adjusted without tipping the cabinet • Legs can be completely retracted into cabinet frame for uniform floor loading
9 Easily Accessible Casters 9 5
• Optional casters mount to side of posts enabling safe, easy field installation or removal without tipping cabinet
10 Optional Slack Spools • Slack management spools organise and manage patch cord slack allowing standardisation of patch cord lengths • Spools are available in side mount for single cabinet or centre mount for ganged applications to provide cable routing flexibility
5
N ET -A CCESS ™ Cabinet Specifications Specifications • 800mm x 1044mm x 2134mm – 45 RU • All welded frame construction • Four fully adjustable mounting rails – available in cage nut or #12 – 24 threaded • Accommodates equipment mounting depths up to 658mm
• Durable black polyester epoxy powder coat finish • UL Listed 1134 kg load rating • Cabinet ships assembled, one per pallet
Cable Capacity Channel Area
Channel End Centre (ganged)
No Slack Spool Cable Capacity*
Channel Area
With Slack Spool Cable Capacity*
cm2
Cat 6A 8mm
Cat 6 6.5mm
Cat 5e 5mm
Fibre 3mm
cm2
Cat 6A 8mm
Cat 6 6.5mm
Cat 5e 5mm
Fibre 3mm
271.0 542.0
222 445
342 684
611 1,223
1,533 3,066
209.0 480.0
171 394
264 606
471 1,083
1,182 2,716
*Note: Capacities are based upon a fill rate of 40% to accommodate proper cable routing techniques.
CN1
Part Number
6
CN2
CN3
Description
Std. Pkg. Qty.
CN1
Cabinet frame with top panel. Dual hinge perforated front door. Split perforated rear door. Solid side panels. Two sets of #12 – 24 threaded equipment mounting rails. 45 RU cable management on front and rear of front posts. Empty cabinet weight is 169 kg. For additional cable management finger sections, specify part number CNBRFK.
1
CN2
Cabinet frame with top panel. Dual hinge perforated front door. Split perforated rear door. Two sets of #12 – 24 threaded equipment mounting rails. 45 RU cable management on front and rear of front posts. No side panels. Empty cabinet weight is 125 kg. For additional cable management finger sections, specify part number CNBRFK.
1
CN3
Cabinet frame with top panel. Two sets of #12 – 24 threaded equipment mounting rails. 45 RU cable management on front and rear of front posts. No doors or side panels. Empty cabinet weight is 94 kg. For additional cable management finger sections, specify part number CNBRFK.
1
N ET -ACCESS ™ Cabinet Options and Accessories
Part Number
CNDD
CNDD
Dual hinge doors open to the left and right to provide maximum accessibility to the cabinet. Open perforated design enables optimum airflow to equipment.
1
CNDS
Split doors open in the middle, minimise the door swing footprint and can be used in narrow data centre hot aisles. Perforated design provides optimum airflow.
1
CNPS
Removable solid side panels cover and protect cable and equipment. Lockable push button latches allow for quick release and removal of side panels for easier and faster moves, adds and changes.
1
CNRT
#12 – 24 threaded equipment rails, sold in pairs. For use when additional sets of rails are desired for multiple equipment mounting depths within a cabinet.
1
CNRC
Cage nut equipment rails, sold in pairs.
1
CNBRFK
Nine RU cable management finger sections. Kit includes five left and five right finger sections to complete 45 RU on one side of left and right posts. Cable capacity of each RU is 48 Category 6A cables.
1
CNAE1
Air ducts provide exhaust channels for equipment for high heat density configurations. Designed for Cisco 6509 switch.
1
CNAE2
Air ducts provide exhaust channels for equipment for high heat density configurations. Designed for Cisco 9513 switch.
1
CNSPE
End channel slack spools manage copper and fibre patch cord slack in the vertical pathway. Package includes left and right slack spools and mounting brackets.
1
CNSPC
Centre channel slack spool for use between ganged cabinets. Includes one centre spool and one mounting bracket.
1
CNCSTR
Casters can be field installed without tipping cabinet for easy movement of a loaded or unloaded cabinet. Includes set of four casters.
1
RGCBNJ660PY
Common bonding network jumper kit; #6 AWG (16mm2); 1.52M length; 45° bent lug on grounding strip side; provided with 5cc of antioxidant, two each #12 – 24 x 1/2", M6 x 12mm, #10 – 32 x 1/2" and M5 x 12mm thread-forming screws and a copper compression HTAP for connecting to the CBN in sizes ranging from #2 AWG to 250 kcmil (35mm2 to 120mm2).
1
RGS134-1Y
Rack grounding strip kit; 2M length; 17mm width; 1.27mm thickness; provided with 5cc of antioxidant, one grounding sticker and three each #12 – 24 x 1/2", M6 x 12mm, #10 – 32 x 1/2" and M5 x 12mm thread-forming screws.
1
RGESD2-1
Two-hole ESD port with 16mm hole spacing; provided with an ESD protection sticker, 5cc of antioxidant and two each #12 – 24 x 1/2" and M6 x 12mm thread-forming screws.
1
CNDS
CNRT
CNPS
CNBRFK
Description
Std. Pkg. Qty.
CNAE1
CNSPE
CNSPC
CNCSTR
RGCBNJ660PY
RGS134-1Y
Refer to www.panduit.com/dcgrounding for detailed information on the complete line of STRUCTUREDGROUND™ Grounding System products.
7
PANDUIT ™ Corp. Tinley Park, Illinois 60477-3091
For more information
Visit us at www.panduit.com Contact Customer Service by email:
[email protected] or by phone: 800-777-3300
PANDUIT Europe Ltd. London, UK
[email protected] Phone: 44.20.8601.7200
PANDUIT Japan Tokyo, Japan
[email protected] Phone: 81.3.3767.7011
PANDUIT Singapore Pte. Ltd. Republic of Singapore
[email protected] Phone: 65.6379.6700
PANDUIT Latin America Jalisco, Mexico
[email protected] Phone: 52.333.777.6000
PANDUIT Australia Pty. Ltd. Victoria, Australia
[email protected] Phone: 61.3.9794.9020
PANDUIT Canada Markham, Ontario
[email protected] Phone: 800.777.3300
WORLDWIDE HEADQUARTERS For a copy of PANDUIT product warranties, log on to www.panduit.com/warranty © 2006 PANDUIT Corp. ALL RIGHTS RESERVED Printed in the EU Brochure Number SA-NCCB39-GB 8/2006
