Transcript
Panasonic Visio Shape User Guide Explain how to use the Shapes of Panasonic Network camera for Microsoft Visio standard 2016
Ver.2.1 Dec.2016
Contents 1. 2. 3. 4. 5. 6.
Functions File of Shape Setting Visio(in Microsoft office Visio standard 2016) Using shape Setting and Information of Shape Report function Revision History
1. File of shape Panasonic Visio shape file contains below 3 files. >Panasonic NW camera Shapes (Metric).vss (Ver.2.1 or later) Shape for Panasonic Network Cameras
>Panasonic_NWcamera_VISIO_manual.pdf How to use the Shapes of Panasonic NWcamera User guide
>Panasonic_Shape_Supported_Products. pdf Reference of Visio shape supported Cameras
2. Setting Visio (in Microsoft office Visio standard 2016) 1) Execute [Microsoft Visio]. 2) Select [File] tab.
3) Select the [New] and create a new drawing by [Blank Drawing].
4) Checkingthe [Metric Units] and press the [Create] button.
5) For setting the drawing scale, selectthe [Design] tab and open the [Page Setup] dialog.
6) Select the [Drawing Scale] tab and set (1:100) in [Pre-defined scale].
7) Select the [Page Properties]tab and set (Millimeters) in [Measurement units]. And press the [OK] button at the end.
3. Using shape 1) Press the [More Shapes]and select the [Open Stencil]on pulldown menu screen. Show the window of [Open Stencil] , and open the [Stencil file:Panasonic NW camera Shapes(Metric).vss].
2)
Displayed Microsoft Visio Security Notice. Select [Enable Macros]
3)
Shape group is shown on the left of the main screen.
4) Drag a shape from [Shapes], and drop it onto [Page].
4. Setting and Information of Shape It displays text and other information of each shape on [Page]. >Text Information Display detail information of shape on [Page]. -
Moving text information When you select the shape, there is a yellowhandle for rearrangement of text information. You can drag a yellow handle to move the position of text information .
-
Hiding/Showing Text information Click the mouse right button, checking [Show Text]item makes showing text and uncheckingmakes hiding text.
>FoV Area Camera shape which is on [Page] has a FoV [Field of View ] area as red color. The Fov area depends on lens and camera settings, so you can estimate the FoV area with this feature. -
Hiding/Showing FoV area Click the mouse right button, checking [Show Fov Visualization] item makesshowing FoV area and unchecking makes hiding FoV.
Showing Fov
Hiding Fov
-
Hiding/Showing PTZ coverage area In PTZ camera shape, Click the mouse right button, checking [Show PTZ Coverage] item makes showing PTZ coverage area and unchecking makes hiding PTZcoverage area.
Showing PTZ Coverage area
Hiding PTZ Coverage area
-
Setting Shape Data You can adjust the data of shape. The text information and FoV area of shape is applied as modified shape data. Click the mouse right button and select [Edit Shape data]item, it shows a [Shape Data] dialog. Editthe each option and click [OK] button. Changeable Shape data list: >Camera aspect ratio: You can choose camera aspect ratio 16:9 or 4:3 . >Lens focal length: In Indoor Box camera ,you can set the lens focal length[mm] . >Horizontal angle of view: You can check angle of view in the Horizontal angle. >Installed height : In 360-degree camera ,you can set installed height . >Camera symbol scale: You can change camera symbol scalein drawing area. >Color : You can change FoV area’s color(red, blue, green, orange) >Purpose of use: When you choose to use purpose, you can check the angle of view. The following shows the purpose of use list. : Human: Recognize someone- approx.100ppm/30ppf : Human: Recognize only known person- approx.150ppm/50ppf : Human: Recognize - approx.300ppm/100ppf : Human: Identify an individual face by system- approx.630ppm/210ppf : Number plate: Recognize by eye - approx.150ppm/50ppf : ANPR/LPR - approx.240ppm/80ppf : Bill: Recognize by eye - approx.400ppm/130ppf
The following shows the each cameratype of shape data dialog.(Red under lines) : Indoor Box Camera
: Outdoor Box Camera
: Dome Camera
: 360-degree camera
: PTZ camera
5. Report function The model name and number of cameras that have beenplaced in the drawing page of Visio, and can be output to the report. 5.1 Basic operation 1) Report shapesare located at the bottom of the shapes display.
2) Drag and drop the Report shape onto the drawing page. The report is displayed. (The model name and number of cameras)
Drag and Drop
3) It can be used in Word and Excel by copying the report results .
Right-click
5.2 Multi-page together report 1) To make a drawing on each page.
Page-1 Page-2 Page-3
2) Select Panasonic NW camera Shapes Reportmenu. - Drag and drop the “Report(Page all)” shape onto the drawing page. - Displayed popup window. - If you are OK , Select [OK] button.
Drag and Drop
3) The report is displayed. (The model name and number of camerasin each page.)
Page-1
Page-2
Page-3
5.3 Update Report 1) If you add a camera(blue) in the report display state.
Add a camera
2) [Enable Report(Left-click)] - [Right-click] - [select Update]or [select Update(Page all)]
Right-click
3) Update reportis displayed.
6. Revision history Doc Ver. 1.0 2.0 2.1
Date Sep.2016 Oct.2016 Dec.2016
Changes First release Add Report function Add display “ppf” on purpose of use
