S
P
E
F
C
I
L
E
ET-SFD320
Smoke cut filter
Description The smoke cut filter is an air filter unit for a Panasonic’s applicable projector, for when the projector is used at events or other situations where smoke, fog or haze is being generated as a special effect. Specifications
Dimensions (W × H × D): Smoke cut filter:
60 × 118 × 248 mm (2-3/8 × 4-21/32 × 9-3/4 inches) 16 × 137 × 331 mm (5/8 × 5-13/32 × 13-1/32 inches) Approximately 174 g (6.1 ozs) Approximately 253 g (8.9 ozs) PT-DZ13K/DS12K/DW11K/DZ10K
Filter cover: Weight*:
Smoke cut filter: Filter cover: Applicable projector:
* Average value. May differ depending on the actual unit.
Parts
Smoke cut filter
......................... 1
Filter cover
............................. 1
Caution: • When the filter is attached, be sure to switch the filter type on the projector’s onscreen menu. • The filter can be used for approximately 24 hours in smoky, foggy or hazy environments. Note that the filter cannot be reused. After use, replace it with an unused filter. • The filter cannot be used at altitudes of 1,400 meters (4,593 feet) or more above sea level or when the ambient temperature is 35 °C (95 °F) or higher.
Dimensions Filter cover
137 ( 5 -13 / 32 )
118 (4-21/ 32 )
248 ( 9 -3 /4 )
331 (13 -1/ 32 )
Smoke cut filter
60 ( 2-3 / 8 ) 16 (5/8)
unit : mm (inch) NOTE: These illustrations are not drawn to scale.
Weights and dimensions shown are approximate. Specifications subject to change without notice.
As of April 2013 SFD13A006
1/2
S
P
E
F
C
I
L
E
ET-SFD320
Smoke cut filter Dimensions
540 ( 21-1/4 )
530 (19 -11/16 ) 538 ( 21-3 /16 )
8 ( 5/16 )
36.5 (1-7/16 )
137 ( 5 -13 / 32 )
8.5 ( 6 /16 )
548.5 ( 21-10 /16 )
Illustration shows the smoke cut filter attached to a projector.
46.5 (1-27/ 32 )
255 (10 -1/ 32 ) unit : mm (inch) NOTE: This illustration is not drawn to scale.
Weights and dimensions shown are approximate. Specifications subject to change without notice.
As of April 2013 SFD13A006
2/2