Transcript
Payment Terminal Activation (Ingenico) In order to complete the activation of the DataCandy application on your payment terminal, you will need the Initialization Code and Merchant Password that were provided to you by DataCandy.
ACTIVATION 1. Press the [.,#*] key to access the main menu. 2. Select DATACANDY and press OK. (If DATACANDY is not displayed, select the DOWN ARROW to scroll down through of the menu). 3. Select ACTIVATE and press OK. 4. Enter the Initialization Code provided to you and press OK. 5. Enter your Merchant Password provided to you and press OK. 6. You are now ready to start using your terminal for gift or loyalty card transactions. * When no EMPLOYEE IDs have been set, transactions are assigned to a generic EMPLOYEE ID (99). * It is recommended that you assign an EMPLOYEE ID to each of your employees. This will allow you to track the transactions done by each employee. See the section MANAGING EMPLOYEE IDs to learn how. * Once you set one or more EMPLOYEE IDs, the prompt for EMPLOYEE ID and EMPLOYEE PASSWORD will be displayed at each transaction. To see how to set a default employee, see the section MANAGING EMPLOYEE IDs.
VALIDATING CONFIGURATION Once you are finished the activation process, here is a way to verify that you have entered the correct information. 1. Review the Configuration Receipt. One may have already printed at the end of the activation process. If this is not the case, see below for instructions on how to print one. 2. Compare the values on the Configuration Receipt (only the 3 fields highlighted in the image) with the values provided by DataCandy. Printing a CONFIGURATION RECEIPT a. Press the [.,#*] key to access the main menu. b. Select DATACANDY and press OK (If DATACANDY is not displayed, select the DOWN ARROW to scroll down through of the menu). c. If prompted enter SUPER PASSWORD (1234). d. Skip SWIPE CARD by pressing CANCEL to access to the DATACANDY menu. e. Select ADMIN and press OK (If ADMIN is not displayed, select the DOWN ARROW to scroll down through of the menu). f. Enter the ADMIN PASSWORD (12345) and press OK. Page 1 of 2
Global Payments_Activation_INGENICO_EN
g. Select PRINT CONFIG and press OK. (If PRINT CONFIG is not displayed, select the DOWN ARROW to scroll down through of the menu).
MANAGING EMPLOYEE IDs 1. Press the [.,#*] key to access the main menu. 2. Select DATACANDY and press OK. (If DATACANDY is not displayed, select the DOWN ARROW to scroll down through of the menu). 3. If prompted enter SUPER PASSWORD (1234). 4. Skip SWIPE CARD by pressing the CANCEL (red) button to access to the DATACANDY menu. 5. Select ADMIN and press OK. (If ADMIN is not displayed, select the DOWN ARROW to scroll down through of the menu). 6. Enter the ADMIN PASSWORD (12345) and press OK. 7. Select the CONFIGURATION menu and press OK. 8. Select EMPLOYEE LIST and press OK (If EMPLOYEE LIST is not displayed, select the DOWN ARROW to scroll down through of the menu). This menu will allow you to: Adding a new EMPLOYEE ID a. Select ADD and press OK. b. Enter the EMPLOYEE ID and press OK. c. Enter the EMPLOYEE PASSWORD and press OK. d. Repeat these steps as necessary. Removing a new EMPLOYEE ID a. Select REMOVE and press OK. b. Choose the EMPLOYEE ID you want to remove using the UP and DOWN ARROWS and press OK. PRINT This will print a list of all employees with an access.
Page 2 of 2
Setting a DEFAULT EMPLOYEE a. Press the [.,#*] key to access the main menu. b. Select DATACANDY and press OK. (If DATACANDY is not displayed, select the DOWN ARROW to scroll down through of the menu). c. If prompted, enter SUPER PASSWORD (1234). d. Skip SWIPE CARD by pressing CANCEL to access to the DATACANDY menu. e. Select ADMIN and press OK. (If ADMIN is not displayed, select the DOWN ARROW to scroll down through of the menu). f. Enter the ADMIN PASSWORD (12345 and press OK. g. Select the CONFIGURATION menu and press OK. h. Select DEFLT EMPLOYEE and press OK. (If DEFLT EMPLOYEE is not displayed, select the DOWN ARROW to scroll down through of the menu). i. Choose the EMPLOYEE ID to be used as default using the UP and DOWN ARROWS and press OK.
Global Payments_Activation_INGENICO_EN
