Transcript
DATA SHEET
®
PB100 10G/40G/100G 32 Port Packet Broker System Supports Filtering, Aggregating and Load Balancing Monitor and Manage Your Network
APPLICATIONS: High density solution
The PB100 10G/40G/100G Packet Broker System offers full functionality, including: filtering, aggregation and load balancing of network traffic. This easy to deploy and cost effective solution is scalable when migrating to 10G, 40G and 100G network speeds while providing one or many monitoring tools access to every bit, byte and packet.®
Root cause analysis Historical lookback Validate policy changes
FILTERS: • VLAN • MPLS • IP
Key Features • SNMP/Syslog support
• Multi-device stacking
• Aggregate network traffic to single or
• Data burst buffering
multiple tools
Packet analysis
• Forward latency
• Session/flow aware load balancing
• CLI management
• Up to 4,000 filter rules
• Telnet/SSH login
• Packet modification
• Hot swappable & redundant AC power supplies
Competitive Edge • Session aware load balancing • MPLS heading stripping • VLAN tagging and stripping
• Flow replication and port mirroring
Ports can be individually configured for optimum flexibility
TECHNOLOGY PARTNERS: Garland Technology’s PB100 Packet Broker System has been approved for use by:
*See port configuration on next page. • (32) 100G-SR ports with QSFP-28 • (132) 25G ports for each 100G port; each 100G port can be configured into (4) 25G ports • (32) 40G-SR4 ports with QSFP-40 • (132) 10G ports for each 40G port; each 40G port can be configured into (4) 10G ports
Have Questions?
[email protected] +716.242.8500 garlandtechnology.com
PB100 10G/40G/100G 32 Port Packet Broker System Supports Filtering, Aggregating and Load Balancing Monitor and Manage Your Network Filtering TAP options Model #
Ports
PB100G32AC
Network Speed
40G Port
100G Port
Power Consumption
Watts
SNMP /Syslog support
10/40/100G
(32) QSFP+
(32) QSFP28
AC Power Supplies
500
Yes
Available Pluggables & Cables: Model #
Description
QSFP+40GBiDi
QSFP+ 40Gigabit-SR-BiDi Multi-Mode Fiber LC Connector
QSFP+40G
QSFP+ 40Gigabit-SR Multi-Mode Fiber MPO-12 Connector
QSFP+40-LR4
QSFP+ 40Gigabit-LR4 Single Mode Fiber LC Connector
QSFP28-4SFP28-Cable_1
100 Gigabit Ethernet QSFP28 to (4) x 25 Gigabit Ethernet SFP28 Splitter Cable, 1 Meter
1U Chassis Specifications:
Support for: QSFP+, QSFP28, SFP+ (SR, LR, ER) Operating Temp.: 0C to 50C / 32F to 122F Operating Humidity: 20% to 70% non-condensing Airflow: front to back Voltage: AC: 100v - 240v 50/60Hz
PB100G32AC Dimensions: 1.75”H x 17.3”W x 16”D (44.45 mm H x 439.42mm W x 406.4mm D)
Port Configuration
®
Garland Technology
|
This document is for informational purposes only. The information in this document, believed by Garland Technology to be accurate as of the date of publication, is subject to change without notice. Garland Technology assumes no responsibility for any errors or omissions in this document and shall have no obligation to you as a result of having made this document available to you or based upon the information it contains. ©2017 Garland Technology LLC. All Rights Reserved
New York + Texas + Germany
|
GarlandTechnology.com
|
[email protected]
022317
