Preview only show first 10 pages with watermark. For full document please download

Pbpe-19ag64 User's Manual

   EMBED


Share

Transcript

PBP-19AG64 / 1-PCIx4/1-PCI-Ex8/ 16-PCI-X/ PICMG 1.3 Backplane T He PBP-19AG64 backplane is fully PICMG 1.3 RC1.0 compliant. It is a member of PBPE’s PCI product family and is intended to support all PICMG compliant boards on the market. The board’s main features include: Connector PCB ¾ One PCI-Express x4 slot (PCIE 1) ¾ One PCI-Express x8 slot (PCIE 2) ¾ Sixteen PCI-X expansion slots (PCIX 1~PCIX 15) ¾ Dedicating three terminal block connectors (TB1,TB2,TB3) ¾ One ATX standard power connector: 24 pins, 5A max. per pin for +5V, -5V, +12V, -12V , +3.3Vvoltages, Ground, and Power Good signal. (CN8) ¾ Two +12 V power connectors (J13,J14) ¾ Providing with Reset (CN2); power good (CN3); fan power connector (CN4), and Power ON (CN5); power button (CN6) pin headers. The Printed Circuit Board’s (PCB) overall dimensions are 416.56mm x 327.66mm (W×H), and total thickness is 1.6mm; 6 layers. Operating temperature : 0℃ ~ 55℃ Storage temperature : -20℃ ~ 75℃ Standard Based on PICMG 1.3 RC1.0 specification - All of PCI-X are based on PCI-X 1.0b specification Note: CN7: IO power connector (option) and J23, J24: RJ-45 connector (option) 2 Power connectors and pin definition: Jump definition J13,J14: +12V Power connector JUMPER/ DESCRIPTION CONNECTOR Pin 1 2 3 4 Signal GND GND GND GND Pin 5 6 7 8 CN1 CN2 CN3 CN4 CN5 CN6 Signal +12V +12V +12V +12V +5Auxilliary Voltage Reset Power Good Fan connector power on Power button CN1:+5Auxilliary Voltage CN8: ATX Power connector Pin 1 2 3 4 5 6 7 8 9 10 11 12 Signal +3.3V +3.3V GND +5V GND +5V GND PWRGD +5VAUX +12V +12V +3.3V Pin 13 14 15 16 17 18 19 20 21 22 23 24 * 1-3 & 2-4 short: +5V auxiliary voltage is provided by a +5V standby power. * 3-5 & 4-6 short: +5V auxiliary voltage is provided by the standard +5V supply Signal +3.3V -12V GND PSON# GND GND GND -5V +5V +5V +5V GND J11, J12: USB Port connectors follow Intel standard pin definition: Pin 1 2 3 4 5 6 7 8 9 10 TB1,TB2,TB3: Terminal Block connector Pin 1 2 3 4 5 Signal +3.3V +3.3V +5V GND GND Pin 6 7 8 9 10 Signal GND GND GND +12V +12V 3 Description Vcc Vcc DM1 DP1 DM2 DP2 GND GND Key NC or Overcurrent Block Diagram: 4 PCI-X IRQ routing Table: IRQ Routing Table CLK Pin A6 (INTA) Pin B7 (INTB) Pin A7 (INTC) Pin B8 (INTD) PCI-X(1) PCI-X(2) PCI-X(3) PCI-X(4) PCI-X(5) PCI-X(6) PCI-X(7) PCI-X(8) PCI-X(9) PCI-X(10) PCI-X(11) PCI-X(12) PCI-X(13) PCI-X(14) PCI-X(15) PCI-X(16) GNT/REQ IDSEL P_A_CLK0 P_A_CLK1 P_A_CLK2 P_A_CLK3 P_B_CLK0 P_B_CLK1 P_B_CLK2 P_B_CLK3 S_A_CLK0 S_A_CLK1 S_A_CLK2 S_A_CLK3 S_B_CLK0 S_B_CLK1 S_B_CLK2 S_B_CLK3 P_A_INTA P_A_INTB P_A_INTC P_A_INTD P_B_INTA P_B_INTB P_B_INTC P_B_INTD S_A_INTA S_A_INTB S_A_INTC S_A_INTD S_B_INTA S_B_INTB S_B_INTC S_B_INTD P_A_INTB P_A_INTC P_A_INTD P_A_INTA P_B_INTB P_B_INTC P_B_INTD P_B_INTA S_A_INTB S_A_INTC S_A_INTD S_A_INTA S_B_INTB S_B_INTC S_B_INTD S_B_INTA P_A_INTC P_A_INTD P_A_INTA P_A_INTB P_B_INTC P_B_INTD P_B_INTA P_B_INTB S_A_INTC S_A_INTD S_A_INTA S_A_INTB S_B_INTC S_B_INTD S_B_INTA S_B_INTB P_A_INTD P_A_INTA P_A_INTB P_A_INTC P_B_INTD P_B_INTA P_B_INTB P_B_INTC S_A_INTD S_A_INTA S_A_INTB S_A_INTC S_B_INTD S_B_INTA S_B_INTB S_B_INTC P_A_0 P_A_1 P_A_2 P_A_3 P_B_0 P_B_1 P_B_2 P_B_3 S_A_0 S_A_1 S_A_2 S_A_3 S_B_0 S_B_1 S_B_2 S_B_3 P_A_AD28 P_A_AD29 P_A_AD30 P_A_AD31 P_B_AD28 P_B_AD29 P_B_AD30 P_B_AD31 S_A_AD28 S_A_AD29 S_A_AD30 S_A_AD31 S_B_AD28 S_B_AD29 S_B_AD30 S_B_AD31 Please visit our technical web site at http://www.portwell.com.tw or Technical Support Department Mailto: [email protected], we will be prompt to reply your technical question and support. 5