Transcript
PRECAUTIONS 1 The unit should not be placed areas: 1) with poor ventilation.
PC1010R Remote Paging Selector
2) exposed to direct sunlight. 3) with high ambient temperature or adjacent to heat generating equipment. 4) with high humidity or dust levels. 5) susceptible to vibration or overthrow. 2 Make sure the power outlet conforms to the plug of the unit and is provided with ground terminal. 3 Do not use this unit if the electrical power cord is frayed or broken.
Remote Paging
SPECIFICATIONS -10
-5
0
3
1-20
MIC
A LL ON
21-4 0
41-60
61 -80
81-10 0
CHIME-01
CHIME-02
5
O UTP UT LEV EL(d BV)
Inputs
POWE R
PC1010R
A LL OFF
RESUME
Mic: 8.0mV, unbalanced +1
+2
+3
+4
+5
+6
+7
+8
+9
+10
+11
+12
+13
+14
+15
+16
+17
+18
+19
+20
Line: 0dBV , unbalanced Audio output
0dBV
Frequency response
Mic: 100Hz-15kHz(±3dB);
Signal to noise ratio
Mic input:
greater than 60dB
Line input:
greater than 70dB
Protection Power Requirement
Line: 20Hz-20kHz(±3dB)
AC fuse F0.2AL AC220-240V/50-60Hz/5W
Outer Packing Size（mm）
（L×W×H）430×260×135
Unit Size (mm)
（L×W×H）270×180×55
Gross weight
2.1 kg
Net weight
1.5 kg
OWNER’S MANUAL Before operating, please read this manual completely.
FEATURES
Specifications are subject to be changed without notice.
CAUTION To reduce the risk of electric shock, do not remove the cover. No user parts inside. Refer servicing to qualified service personnel.
DSPPA Acoustic Technology Co., Ltd.
4
l
100 Zones for directly selecting.
l
Remote distance up to 1 km.
l
1 MIC and 1 LINE input. Volume variable.
l
2 Chimes function.
l
Muting function.
l
“Busy”indicator & sound level meter.
1
FRONT PANEL
CONNECTIONS 7 CAUTION!
WA RN ING:T O RED UC E TH E RISK OF FIR E OR ELEC TR IC SHOC K. D O N OT EXPOSE T HIS EQUI PM ENT TO RAIN OR MOIST URE.
ADD RESS DAT A IN
RISK OF ELECTRIC SHOCK DO NOT OPEN
CHIM E VOL
DAT A OU T 1 23 4
23 0V
6
MIC 2 IN
LIN E1 IN
LIN E2 IN
11 5V
3 4 5
FU SE RA TIN G F1 AL: 1 10 -11 5V F0.6 AL: 2 20 -23 0V
2 20 -23 0V 110 -11 5V 230
12
OU T
VOLTAGE SEL ECTOR
ON
REM OT E IN
1 15 V~2 30 V/50 Hz-6 0H z MIN
PC1010R
STATION POWER IN PUT
M AX
GN D. +2 4VD C
P UBL IC AD DR ESS PER IP HER AL DE VIC E
DSPPA Acoustic Technology Co.,Ltd.
STATION POWER OU TPU T
+24 VDC GND .
MODEL: PC1010P
Line level input. This port can be connected to the output port of PC1010R or console for broadcasting conference.
8 1 XLR MIC Base
4 Power Switch
7 Chime Keys
2 Level indicator
5 Function Keys
8 Zone Select Keys
3 MIC Switch
6 Range Select Key
Line level output. Can be regarded the unit as a normal audio source. For example, it can be connected to a Normal input module of an Intelligent PA Center. *optional
REAR PANEL OPERATION 1.
Fix the MIC head, and then turn on the power.
2.
Press the range select key 1-20,you can switch on paging zones 1 to 20,in the same way press the
3.
Press one or more keys of Zone Select for switching on paging zones (the indicators lit). If there is
range select key 21-40,you can switch on paging zones 21 to 40,most 100 zones can be operated.
1
2
3 4 5 6
any zone in busy, the indicator will flash. In this case, only the terminal with higher priority can take
7
it over. 1 Fuse
4 Chime Volume
2 Mains
5 Line Input
3 Mic volume
6 Audio Output
7 Remote Port
4.
Press key Chime-1 or Chime-2 to send a Chime out. CHIME-1 for‘1 3 5
i --’ and CHIME-2 for
‘i 5 3 1 --’. Chime volume can be adjusted with CHIME VOL on rear panel. 5.
Press key MIC (the indicator lit) for broadcasting with the microphone. Press the corresponding keys again or press key ALL-OFF instead of Zone Select keys for reset (the indicators gone off) when
MUTING FUNCTION
done.
Signal from LINE is automatically muted by signal from MIC or CHIME. 6.
2
Turn off the power when doesn’t run chronically.
3
