Preview only show first 10 pages with watermark. For full document please download

Pc4 Carrying Case Instructions

   EMBED

Share

Transcript

PC4 Carrying Case Instructions The PC4 carrying case is a rugged accessory that provides a convenient way to transport and store the PC4 printer. The carrying case also provides easy access to the printer buttons, connectors, and batteries to allow you to print labels while the printer is in the carrying case. PC4 Carrying Case Features Use the carrying case to carry the printer, an extra battery, and any accessories you may have purchased. The carrying case has a battery pocket, an accessory pocket, and a sturdy shoulder strap to make it easy for you to store and transport everything you need for your printer. Battery pocket Accessory pocket Shoulder strap Note: You must turn off the battery pack on the PC4 while you are transporting it in the carrying case. Printing With the PC4 While Using the Carrying Case The PC4 carrying case has two zippers that you must unzip to be able to print labels without removing the printer from the carrying case. Unzipping the case allows the sides to fold down and provides ventilation for the printer battery pack. Note: Do not operate the printer or charge the battery unless the carrying case is completely open. To prepare the carrying case for printing 1 Unzip both of the carrying case zippers completely. 2 Roll the printer bag flap toward the inside of the carrying case and secure with the Velcro strap. Velcro strap Printer bag flap PC4 Carrying Case: The carrying case is shown without the printer inserted so that you can see the printer bag flap. 6001 36th Avenue West Everett, WA 98203 U.S.A. www.intermec.com © 2004 Intermec Technologies Corp. All Rights Reserved PC4 Carrying Case Instructions *074762-001* P/N 074762-001