Transcript
Remote Controller
PCI-8570/PXI-8570 PCI Control of PXI/CompactPCI Introduction The ADLINK PCI/PXI-8570 expansion kit is a PCI-to-PXI or PXI-to-PXI expansion module that functions as a transparent PCI-to-PCI bridge register set. Implementing master and slave extension modules, users can have direct control of PXI/CompactPCI chassis from any other PC or another PXI/CompactPCI system. All devices on the system are deemed to be local devices on the same PCI bus. The PCI interface supports 64-bit or 32-bit PCI buses operating at 66 MHz or 33 MHz. By adopting shielded twisted copper cables, PCI-8570/PXI-8570 can expand the transmission distance to 10 meters. One master expansion card (either PCI-8570 or PXI-8570) can expand up to 2 slave expansion modules (PXI-8570) at the same time. A bundled link can support the full bandwidth of a 64-bit/66 MHz PCI bus. All interrupts asserted by add-in cards in the expansion system are passed through the expansion set to the host system. With ADLINK PCI/PXI-8570, users can combine PCI, CompactPCI, and PXI devices in the same system, increase the available number of PXI/CompactPCI slots for high-density I/O application and separate a control system from a harsh environment with an expansion chassis.
Features ■ ■ ■ ■ ■ ■ ■ ■
■ ■ ■ ■
Direct PC control of PXI/CompactPCI systems Multi-chassis configurations for PXI/CompactPCI Up to 2 PCI segments extended from single PCI/PXI-8570 Up to 64-bit, 66 MHz PCI bus expansion StarFabric link performance 528 MB/s peak (64-bit, 66 MHz PCI) 132 MB/s peak (32-bit, 33 MHz PCI) expansion distance of up to 10 meters (extension cables at 2 M, 5 M, and 10 M) Completely hardware and software transparent Independence of operating systems Seamless PCI interrupt extension Compliant with • PCI local Bus Specifications Rev. 2.2 • PCI-to-PCI Bridge Architecture Specifications Rev. 1.1 • PXI Specifications Rev. 2.2
General Specifications
• Operating temperature: 0˚C to +50˚C (32˚F to 122˚F)
• Storage temperature: -20˚C to +80˚C (-4˚F to 176˚F)
• Relative humidity: 10% to 90%, non-condensing
Certification
Ordering Information ■ PCI-PXI Expansion Kit Includes One PCI-8570, One PXI-8570, and One ACL-PXIES-2 Cable ■ PXI-PXI Expansion Kit Includes Two PXI-8570 and One ACL-PXIES-2 Cable ■ PCI-8570 PCI-to-PXI Expansion Interface Card for Host PC
PXI-8570
ACL-PXIES-2/-5/-10
Specifications ■ PCI-8570
■
• EMC/EMI: CE, FCC Class A
■ PXI-8570 PCI-to-PXI/PXI-to-PXI Expansion Interface Module for PXI Chassis
PCI-8570
PXI-8570
• PCI™ local bus specifications Rev. 2.2 compliant • Maximum data throughput - 132 MB/s (32-bit, 33 MHz PCI) - 528 MB/s (64-bit, 66 MHz PCI) • I/O Connector: RJ-45 connector x 4 • Extended distance of up to 10 meters • Dimensions (not including connectors): 160 mm (H) x 100 mm (W) (6.24” x 3.9”) • Power requirement: Device
+5 V
+3.3 V
PCI-8570
190 mA
250 mA
• PXI™ Specifications Rev. 2.2 compliant • PCI-to-PCI Bridge Architecture Specifications Rev. 1.1 compliant • PCI™ Local Bus Specifications Rev. 2.2 compliant • Supports both 32-bit/66 MHz and 64-bit/66 MHz PCI™ interface • I/O Connector: RJ-45 connector x 4 • Internal arbiter supports up to 7 external masters • Up to seven PCI clock/bus requests • Extended distance of up to 10 meters • Dimensions: 3U PXI form factor 175 mm (W) x 107 mm (H) (6.82” x 4.17”) • Power requirement Device +3.3 V PXI-8570
■
ACL-PXIES-2/-5/-10
540 mA
• Length: 2 M, 5 M, 10 M
■ ACL-PXIES-2 Copper Cable Kit, 2 M ■ ACL-PXIES-5 Copper Cable Kit, 5 M ■ ACL-PXIES-10 Copper Cable Kit, 10 M 1-13 www.adlinktech.com
Updated September 23, 2014. ©2014 ADLINK Technology, Inc. All Rights Reserved. All specifications are subject to change without further notice.
Mouser Electronics Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
ADLINK Technology: ACL-PXIES-5 ACL-PXIES-2 PCI-8570 ACL-PXIES-10
