Preview only show first 10 pages with watermark. For full document please download

Pcm-3115 Pc/104-plus 2 Slot Pcmcia Module Startup Manual Introduction Features

   EMBED


Share

Transcript

PCM-3115 PC/104-Plus 2 Slot PCMCIA Module Introduction Features The PCM-3115 is a PCMCIA interface module that attaches to the PC/104-plus connector on your CPU card or PC/104-plus CPU module. The PCM-3115 provides 32-bit performance, PCI bus capability, and is fully compliant with PC Card 95/97/98, Card 32 (32 Bit) specifications and PCMCIA V2.1 / JEIDA 4.2 (16 Bit). The module includes 2 PCMCIA slots. Two LEDs indicate the activity of the PCMCIA card in each slot. The PCM-3115, with its Ricoh Card Bus Controller chipset, brings the latest PCMCIA performance features to Advantech's PC/104 line. This includes low power consumption (hardware suspend) and Microsoft native driver support. The Ricoh chipset, with a substantial list of pretested supported devices, allows for greater all-around compatibility for your PCMCIA device support. PCM-3115 PC/104-Plus 2 Slot PCMIA Module • High-performance (PC/104 PLUS) • Low Power consumption (Hardware Suspend) • Complies with PC Card 95/97/98, Card 32 (32 Bit) • PCMCIA V2.1 / JEIDA 4.2 (16 Bit) • Accept Type I/II/III PCMCIA cards • Supports 2 PCMCIA Slots (when Type III card used in Slot 2, Slot 1 will be occupied too) • Support Plug & Play automatic detection & configuration • Support Windows NT 4.0, Windows 95/98/2000 Packing List Before you begin installing your card, please make sure that the following materials have been shipped: Specifications • 1 PCM-3115 PC/104 PCMCIA module • System Chipset: Ricoh Card Bus Chipset • 1 Start-up manual • Power management: Supports Advanced Configure Power Interface (ACPI) If any of these items are missing or damaged, contact your distributor or sales representative immediately. • Data Bus: 32 Bit • Bus Speed: Compliant with PCI 2.1 (33 Mhz) • PCMCIA Slot: 2 Slots • PCMCIA Card: Accept Type I/II/III PCMCIA Cards PCM-3115 PC/104-Plus 2 Slot PCMCIA Module Startup Manual • Plug & Play: Support Plug & Play automatic detection & configuration • PC/104 expansion: 104-pin and 120-pin 16/32bit PC104 /Plus module connector • Operating Voltage: +5 V Only • Power Consumption: +5 @ 70 mA (Typical) For more information on this and other Advantech products, please visit our website at: • Size/Weight: 96 x 90 mm (3.8” x 3.5”). 90 g (0.198 lb) http://www.advantech.com http://www.advantech.com/epc • Environment: 0 ~ 60° C (operation), -40 ~ 85° (Storage) For technical support and service, please visit our support website at: • Humidity: 0 ~ 90 % http://www.advantech.com/support This manual is for the PCM-3115 Part No. 2006311511 Printed in Taiwan 2nd Edition July 2001 PCM-3115 Startup Manual 1 Mechanical Drawings Locating Connectors and Jumpers Board Dimensions CN1 LED 2 LED 1 PCMCIA 10.00 SW1 CN2 Jumper Settings SW1: PC/104 Plus Module IRQ Setting PC104 plus slot REQ# GNT# CLK ID Address INT#0 INT#1 INT#2 INT#3 1 1 REQ#0 GNT#0 CLK0 AD 20 INT#A INT#B INT#C INT#D 2 2 REQ#1 GNT#1 CLK1 AD 21 INT#B INT#C INT#D INT#A 3 REQ#2 GNT#2 CLK2 AD22 INT#C INT#D INT#A INT#B 4 REQ#2 GNT#2 CLK2 AD23 INT#D INT#A INT#B INT#C ON 2 ON 1 ON 2 1 ON 2 1 Connectors and Jumpers CN1 2 PCM-3115 Startup Manual PC104/Plus Connector (PCI) CN 2 PC 104 plus connector (ISA) P1 PCMC2A socket SW1 PC104 plus slot select LED1 PCMC2A socket 1 activity LED2 PCMC2A socket 2 activity PC/104+ Bus signal assignments (PCI) Pin Number 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 * low active Signal (CN1) RowA GND/5V/KEY VI/O AD05 C/BE0* GND AD11 AD14 +3.3V SERR* GND STOP* +3.3V FRAME* GND AD18 AD21 +3.3V IDSELO AD24 GND AD29 +5V REQ0* GND GNT1* +5V CLK2 GND +12V -12V RowB RESERVED AD02 GND AD07 AD09 VI/O AD13 C/BE1* GND PERR* +3.3V TRDY* GND AD16 +3.3V AD20 AD23 GND C/BE3* AD26 +5V AD30 GND REQ2* VI/O CLK0 +5V INTD* INTA* Reserved Signal (CN1) RowC RowD +5 AD00 AD01 +5V AD04 AD03 GND AD06 AD08 GND AD10 M66EN GND AD12 AD15 +3.3V SB0* PAR +3.3V SDONE LOCK* GND GND DEVSEL* IRDY* +3.3V +3.3V C/BE2* AD17 GND GND AD19 AD22 +3.3V IDSEL1 IDSEL2 VI/O IDSEL3 AD25 GND AD28 AD27 GND AD31 REQ1* VI/O +5V GNT0* GNT2* GND GND CLK1 CLK3 GND +5V RST* INTB* INTC* Reserved GND/3.3V KEY : PC/104-Plus connector (PCI bus) PCM-3115 Startup Manual 3 PC/104+ Bus signal assignments (ISA) Pin Number 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 * low active 1 Signal (CN2) RowA IOCHCHK* SD7 SD6 SD5 SD4 SD3 SD2 SD1 SD0 IOCHRDY AEN SA19 SA18 SA17 SA16 SA15 SA14 SA13 SA12 SA11 SA10 SA9 SA8 SA7 SA6 SA5 SA4 SA3 SA2 SA1 SA0 0V 2 Row A 1 2 ○ ○ ○ ○ Signal (CN2) RowC RowD GND GND SBHE* MEMCS16* LA23 IOCS16* LA22 IRQ10 LA21 IRQ11 LA20 IRQ12 LA19 IRQ15 LA18 IRQ14 LA17 DACKO* MEMR* DRQ0 MEMW* DACK5* SD8 DRQ5 SD9 DACK6* SD10 DRQ6 SD11 DACK7* SD12 DRQ7 SD13 +5V SD14 MASTER* SD15 0V (KEY) 0V ------------------------------------------------------------------------- 1 31 32 2 Row D 31 32 PCM-3115 Startup Manual ○ ○ ○ ○ 19 20 ○ ○ ○ Row C ○ ○ ○ Row B 4 ○ ○ ○ ○ RowB GND RESET +5 V IRQ9 -5V DRQ2 -12V ENDXFR* +12V (KEY) SMEMW* SMEMR* IOW* IOR* DACK3* DRQ3 DACK1* DRQ1 REFRESH* SYSCLK IRQ7 IRQ6 IRQ5 IRQ4 IRQ3 DACK2* TC BALE +5V OSC 0V 0V 1 2 ○ ○ ○ ○ 19 20