Transcript
“Simple the best value in the industry”
PCM-508
Pneumatic Cut-Off Saw with Rotary Table
T (Thickness)
W (Width)
W2 (45° Bevel)
mm
inch
mm
inch
mm
inch
25 mm
0.98”
295 mm
11.60”
165 mm
6.50”
50 mm
1.97”
285 mm
11.22”
165 mm
6.50”
75 mm
2.95”
265 mm
10.43”
165 mm
6.50”
100 mm
3.94”
243 mm
9.57”
165 mm
6.50”
125 mm
4.92”
205 mm
8.07”
130 mm
5.12”
150 mm
5.9”
165 mm
6.50”
100 mm
3.94”
FEATURES: • • • • • • • • •
Designed for High speed, accuracy and production Specially designed rotary table allows angular cutting quick and easy The clamping mechanism is mounted with linear guide ways The rotary table can be swiveled to right and left with maximum 45° angle. This allows for angular cutting. The table is equipped with a lock pin, allowing the table to fast lock position at 45°. Table surface is precision ground. The clamping mechanism is driven by an air cylinder in combination with the use of linear guide ways, which ensure fast and smooth clamping motions. Infeed and outfeed fence surfaces are precision ground. Equipped with an anti-bump rubber stop to prevent serious bumping of clamp.
SPECIFICATIONS: Cutting capacity (thickness x width) Cycle speed Saw blade size (optional) Saw arbor diameter Saw blade speed Dust exhaust diameter Motor Table size Net weight Gross weight Packing dimensions (L x W x H)
+45° ~ 0° ~ -45° 30~45 cuts/min 20” 1" 3100 rpm 4" (100mm) x 2 7.5 HP 36.2” x 24.8” (920 x 630 mm) 1190 lbs (540 kg) 1455 lbs (660 kg) 50.4” x 43.3” x 63” (1280 x 1100 x 1600 mm)
*Available in 230 / 460 / 575 V electrics
888.982.2683 www.cantekmachinery.com
“Simple the best value in the industry”
PCM-610
Pneumatic Cut-Off Saw with Rotary Table
T (Thickness)
W (Width)
B (45° Bevel)
mm
inch
mm
inch
mm
inch
25 mm
0.98”
380 mm
14.96”
540 mm
21.26”
50 mm
1.97”
370 mm
14.57”
530 mm
20.87”
75 mm
2.95”
350 mm
13.78”
500 mm
19.69”
100 mm
3.94”
340 mm
13.39”
470 mm
18.50”
125 mm
4.92”
300 mm
11.81”
420 mm
16.54”
150 mm
5.9”
260 mm
10.24”
370 mm
14.57”
175 mm
6.89”
200 mm
7.87”
280 mm
11.02”
200 mm
7.87”
140 mm
5.51”
200 mm
7.87”
FEATURES: • • • • • • • • •
SPECIFICATIONS:
Designed for High speed, accuracy and production Specially designed rotary table allows angular cutting quick and easy The clamping mechanism is mounted with linear guide ways The rotary table can be swiveled to right and left with maximum 45° angle. This allows for angular cutting. The table is equipped with a lock pin, allowing the table to fast lock position at 45°. Table surface is precision ground The clamping mechanism is driven by an air cylinder in combination with the use of linear guide ways, which ensure fast and smooth clamping motions. Infeed and outfeed fence surfaces are precision ground. Equipped with an anti-bump rubber stop to prevent serious bumping of clamp. PMB #104, 1124 Fir Avenue Blaine, Washington 98230 Toll Free: 1-888-982-2683 Fax: (604)540-1780 Email:
[email protected]
distributed by:
Cutting capacity (thickness x width) Cycle speed Saw blade size (optional) Saw arbor diameter Saw blade speed Dust exhaust diameter Motor Table size Net weight Gross weight Packing dimensions (L x W x H)
+45° ~ 0° ~ -45° 35~40 cuts/min 24” 1" 2000 rpm 4" (100mm) x 2 10 HP 45.27” x 29.5” (1150 x 750 mm) 1785 lbs (810 kg) 2116 lbs (960 kg) 59” x 53.5” x 78.75” (1500 x 1360 x 2000 mm)
*Available in 230 / 460 / 575 V electrics
