Transcript
4
acoustic
Pro Audio Germany
PCS Horn PA
4
acoustic
The perfect high quality sound system for events in small to medium-sized marquees or halls covering around 1,000 square meters or distances up to 40 meters. The basic set of PCS Horn PA contains four PCS-118HB horn subwoofer and 2 PCS-112HT horn loaded mid/highfrequency enclosures. This set provides a maximum SPL of over 141 dB. The stack of two subwoofer and one mid/high cabinet offers an perfect listening height of 2 meters. The coverage pattern of PCS-112HT is 120° x 40° (horizontal and vertical). When using 4-Acoustic DSA amplifier power amp racks, the whole system can be wired with 4-pole SPKN cables without any danger of accidental wiring mistakes. By using the active version of PCS-112HT the amplifier of two PCS-118HB is included so that two subs PCS-118HB will be wired to PCS-112HTA.
PCS Horn PA
PCS-118HB 4-Acoustic´s PCS-118HB subwoofer is a hybrid horn cabinet, equipped with STAGETONE high-power 18“ transducer ST-18-1000. With a frequency response from 38Hz - 170Hz (-10dB) PCS-118HB can offer a variable crossover frequency to mid/high cabinets for example PCS-112HT strictly application-oriented between 80Hz and 160Hz. The cabinet is made of 18mm birch plywood. Corner joints and braces are grooved and glued. An extremely durable sandy Polyurethane coating covers the cabinet’s surface. The steel grille is coated with strong black powder coating. An additional offered lockable cover protects the PCS-118HB during transport and bad environmental conditions. The aluminum back panel uses two 4-pole SPKN connectors (IN/Link Through). The pin assignment is 1+/1-. Pins 2+ and 2- are also connected between the two SPKN connectors. When using 4-Acoustic DSA amplifier power amp racks, the whole system can be wired with 4-pole SPKN cables without any danger of accidental wiring mistakes.
PCS Horn PA
PCS-112HT
PCS-112HT is a 2-Way cabinet for use as mid/high frequency enclosure on top of two PCS-118HB subwoofers. It used one high-power STAGETONE 12“ transducer ST-12-600 for the low mid and a 1,4” neodymium driver with 3” voice coil for the mid/high frequency range. The adoption frequency to the subwoofer can be set between 75Hz and 160Hz. The coverage pattern of PCS-112HT is 120° x 40° (horizontal and vertical). With a low resonance frequency setting of 75Hz PCS-112HT can be used fullrange for Near-Fill and Side-Fill applications as well as the reinforcement of speech. The cabinet is made of high quality birch plywood. Corner joints and braces are grooved and glued. An extremely durable sandy Polyurethane coating covers the cabinet’s surface. The steel grille is coated with strong black powder coating. An additional offered lockable cover protects the PCS-112HT during transport and bad environmental conditions. The aluminum back panel uses two 4-pole SPKN connectors (IN/Link Through). The pin assignment is 2+/2-. Pins 1+ and 1- are also connected between the two SPKN connectors. When using 4-Acoustic DSA amplifier power amp rack, the whole system can be wired with 4-pole SPKN cables without any danger of accidental wiring mistakes.
PCS Horn PA
PCS-112HT
PCS Horn PA
PCS-112HTA The active version of PCS-112HT (called PCS-112HTA) is equipped with a high efficient 3 way class D amplifier system driven by a high end DSP unit. This amplifier system offers 2700 Watt RMS @4 Ohm for two PCS-118HB subwoofers and 900W RMS plus 400W RMS for the mid/high components in this cabinet. The DSP unit includes full control over the whole system. A professional limiting controlling prevents the system for any overloading damage. The DSP can be controlled by rotary encoder and 16 characters LC Display, or computer software by USB connection. The input section includes Line In / Link Through for the left and right signal. A Mono/Stereo Button can be used to select the input mode. The output section uses two parallel connected 4-pole SPKN sockets (SUB 1/ SUB 2). The pin assignment is 1+/1-. So two 8 Ohm Subwoofers can be connected to PCS-112HTA. The connection of the mains voltage connection is realized by Neutrik Powercon.
PCS Horn PA
PCS Horn PA, Passive SPECIFICATIONS
PCS-118HB
PCS-112HT
SYSTEM TYPE
18“
12“/1,4“
POWER RATING
1000 W 2000 W 4000 W
FREQUENCY RANGE
38
(-10dB)
subwoofer
COVERAGE PATTERN
650 W rms 1300 W program 2600 W peak
rms program peak
- 250
Hz
mid/high horn system
75
Hz
-
- 20
Hz
kHz
120° x 40°
SENSITIVITY
99 dB
103 dB
MAXIMUM SPL
135
NOMINAL IMPEDANCE
8
INPUT CONNECTORS
2 x SPKN
SUSPENSION/MOUNTING
Top mounted M20 threaded socket
DIMENSIONS (HxWxD)
850x700x595
NET WEIGHT
67,0
1w/1m
136
dB
8
Ohm
1w/1m
dB
Ohm
2 x SPKN
parallel 1+/1-
(h x v) 1kHz -6dB
parallel 1+/1-
600x700x595
mm
59,0
Kg
mm
Kg
PCS Horn PA, Active SPECIFICATIONS
PCS-118HB
PCS-112HTA
SYSTEM TYPE
18“ subwoofer
12“/1,4“
mid/high horn loaded active system
AMPLIFIER TYPE
High efficiency Class D with programable high end DSP unit
POWER RATING AMPLIFIER
2700 W 900 W 400 W
FREQUENCY RANGE
(-10dB)
38
Hz
COVERAGE PATTERN
- 250
75
Hz
2 x SPKN
SUSPENSION/MOUNTING
Top mounted M20 threaded socket
DIMENSIONS
850x700x595
NET WEIGHT
67,0
Kg
rms high frequency
- 20
120° x 40°
CONNECTORS
(HxWxD)
Hz
rms sub bass rms low mid frequency
1 1 1 2 1 1
1+/1-
mm
x x x x x x
kHz (h x v) 1kHz -6dB
Line In XLR female Link throu XLR male USB connector SPKN 1+/1- for subbass Mains IN Mains Link Throu
600x700x595 65,0
mm
Kg
PCS Horn PA
4
acoustic
Pro Audio Germany
Gersteintraße 6 59227 Ahlen, Germany Tel. +49 (0) 2382-7087-0 Fax +49 (0) 2382-7087-25
[email protected] www.4-acoustic.com
