Transcript
WP-28 Active Wall Plate − Composite, s−Video, Component Video & Audio Receiver
The WP−28 is a twisted pair receiver for composite video, s−video, or component video and unbalanced stereo or S/PDIF audio signals. It converts a twisted pair signal from the WP−27 back into the original audio and video formats.
Available in Gray, White & Off-White
FEATURES
Video Switching - Between either CV or s−Video (Y/C) and component video. Audio Switching - Between unbalanced stereo and S/PDIF audio. Level (Gain) & EQ (Peaking). Power Connect™ System - A single connection to the transmitter or the receiver powers both units. System Range - Up to 100m (320ft). Cable - UTP (unshielded twisted pair) or STP (shielded twisted pair) such as CAT 5. Wall Plate Size - 2 gang EU, 3 gang US. Optional - RK−121WP 19" adapter (for EU size wall plates only).
WP-28
TECHNICAL SPECIFICATIONS
INPUT: OUTPUTS:
MAX. OUTPUT LEVEL: RESOLUTION: BANDWIDTH (-3DB): S/N RATIO: TOTAL GAIN: COUPLING: THD+N: POWER CONSUMPTION: INCLUDED ACCESSORIES: OPTIONS:
1 RJ−45 CAT 5 shielded connector. 1 s−Video (Y/C) 1Vpp/75Ω (Y), 0.3Vpp/75Ω (C) on a 4−pin connector; 1 composite video (CV) 1Vpp/75Ω on an RCA connector; 1 component 1Vpp/75Ω (Y,Pb,Pr) on 3 RCA connectors; 1 S/PDIF (digital audio) on an RCA connector; 1 unbalanced stereo audio on a 3.5mm mini jack. Video: 1V, Audio: 2.5V. Up to UXGA, up to 1080p. Audio: 20Hz to 20kHz @0.5dB. Audio: <–80dB. Audio: Analog/analog: 0dB; Analog/ S/PDIF: –12dBFS. AC. Audio: <0.01%. 12V DC, 300mA. Power supply. RK−2WP 19" rack adapter.
