Transcript
WP-27 Active Wall Plate − Composite, s−Video, Component Video & Audio Transmitter
The WP−27 is twisted pair transmitter for composite video, s−video, or component video and unbalanced stereo or S/PDIF audio signals. It converts a single audio and video input into a twisted pair signal and the WP−28 converts it back into the original video formats.
Available in Gray, White & Off-White
FEATURES
Video Switching - Between CV and component or s−Video and component video. Audio Switching - Between unbalanced stereo and S/PDIF audio. Power Connect™ System - Only one unit in a system, either the transmitter or the receiver needs to be connected to a power source. System Range - Up to 100m (330ft). Cable - UTP (unshielded twisted pair) or STP (shielded twisted pair) such as CAT 5. Wall Plate Size - 2 gang EU, 3 gang US. Optional - RK−121WP 19" adapter (for EU size wall plates only).
WP-27
TECHNICAL SPECIFICATIONS
INPUT:
OUTPUT: RESOLUTION: CONTROLS: BANDWIDTH (-3DB): S/N RATIO: TOTAL GAIN: COUPLING: THD+N: POWER CONSUMPTION: INCLUDED ACCESSORIES: OPTIONS:
1 s−Video (Y/C) 1Vpp/75Ω (Y), 0.3Vpp/75Ω (C) on a 4−pin connector; 1 composite video (CV) 1Vpp/75Ω on an RCA connector;1 component 1Vpp/75Ω (Y,Pb,Pr) on 3 RCA connectors;1 S/PDIF (digital audio) on an RCA connector; 1 unbalanced stereo audio on a 3.5mm mini jack. 1 RJ−45 CAT 5 shielded connector (CAT 5 out). Up to UXGA, up to 1080p. Video input selector button, audio input selector button. Audio: 20Hz to 20kHz @0.5dB. Audio: <–80dB. Audio: analog/analog: 0dB; analog/ S/PDIF: –12dBFS. AC. Audio: <0.01%. 12V DC, 200mA. Power supply. RK−2WP 19" rack adapter.
