Pdf F270xa & F271xa Data Sheet

Transcript

Safeguarding Communications Since 1958 FOM II Series - F270xA / F271xA Fiber Optic Telephone Modems Product Features • Extend one analog telephone line • Analog audio signal 300Hz to 3.4KHz • Transmit up to 20 km • LED Indicators for Instant System Monitoring • Three available housing options • Standalone or Rack-Mount • Compatible with the VERSIMUX II Multiplexer System • SFP Technology Product Description VERSITRON FOM II Series Fiber Optic Telephone Modems are used to extend a single analog telephone line over duplex multi-mode or single-mode fiber. The F270xA functions as the exchange side modem while the F271xA functions as the subscriber side modem. For intercom or ring-down applications, the F271xA is used at each end of the connection. An RJ11 connector provides the copper interface for the telephone input. LC fiber connectors provide the fiber optic interface. VERSITRON FOM II Series Fiber Optic Telephone Modems digitizing process allows for a fully transparent fiber optic link. LED indicator lights are used as status indicators on the F270xA and F271xA modems for the telephone link status. Their functions are: • LINK - Indicates the remote link is active and synchronized • SYSTEM - Indicates the system is active and configured (ready for operation) • 1 - Indicates the status of the telephone line connected to Port 1 (On-Hook, Off-Hook, Ringing) Product Models Model Function Connector Fiber Cable Wavelength Max Distance F2702A Fiber Optic Telephone Modem - Exchange Side LC MM 1310nm 2 km F2705A Fiber Optic Telephone Modem - Exchange Side LC SM 1310nm 20 km F2712A Fiber Optic Telephone Modem - Subscriber Side LC MM 1310nm 2 km F2715A Fiber Optic Telephone Modem - Subscriber Side LC SM 1310nm 20 km NOTE: The new F270xA and F271xA modems are not backwards compatible with the F270x and F271x modems. VERSITRON, Inc. 83 Albe Drive ● Suite C ● Newark, DE 19702 Tel: 302-894-0699 Fax: 302-894-0624 Toll Free: 800-537-2296 www.versitron.com JUN2015 F270xA & F271xA TELEDATA FIBER OPTIC MODEM Safeguarding Communications Since 1958 FOM II Series - F270xA / F271xA Fiber Optic Telephone Modems General Specifications: Dimensions 11.875 x 7 x .875in / 30.2 x 17.8 x 2.22cm (LxWxH) Weight Operating Temperature Storage Temperature Humidity 0.28 kg (10 oz) 0° to 50°C (32° to 122°F) -40° to 70°C (-40° to 158°F) Up to 95% relative humidity (non-condensing) Altitude Up to 10,000 ft Electrical Interface: Power Requirements 12VDC, 1.0Amp Connector (Tip & Ring) Audio Signal Idle Channel Noise Single Frequency Distortion 2nd Harmonic Distortion Talk Battery Loop Current Ring Signal Line Impedance RJ-11, 2-Wire Twisted Pair Analog, 300Hz to 3.4KHz -65dBm -46dBm -55dBm 44 to 52VDC 40mA max. (off hook) 92Vpeak (max), 15 to 67Hz 600Ω Accessories: Model Description HF-1 HF-2SS Single Card Enclosure 2-Slot 19” Rack-Mount Chassis 20-Slot 19” Rack-Mount Chassis VERSIMUX II 20-Slot 19” Rack-Mount Chassis Redundant Power Supply / System Monitor for HF-20A & VMX20 Chassis 110VAC to 12VDC Power Adapter 220VAC to 12VDC Power Adapter Single-Slot Blank Panel for HF-2SS or HF-20A Chassis Double-Slot Blank Panel for HF-20A Chassis HF-20A VMX20 AC300WR PSAC08 PSAC09 ADPHF01 ADPHF02 VERSITRON, Inc. 83 Albe Drive ● Suite C ● Newark, DE 19702 Tel: 302-894-0699 Fax: 302-894-0624 Toll Free: 800-537-2296 www.versitron.com JUN2015 F270xA & F271xA TELEDATA FIBER OPTIC MODEM