Preview only show first 10 pages with watermark. For full document please download

Pdf F270xad And F271xad Data Sheet

   EMBED


Share

Transcript

Safeguarding Communications Since 1958 FOM II Series - F270xAD / F271xAD Fiber Optic Teledata Modems Product Features • Extend one 2-Wire analog telephone line and/or data • Analog audio signal 300Hz to 3.4KHz • RS-485/RS-422 Full-Duplex Data up to 64Kbps • Supports up to 14.4Kbps for modem or fax • Transmit up to 20 km • LED Indicators for Instant System Monitoring • Three available housing options • Standalone or Rack-Mount • Compatible with the VERSIMUX II Multiplexer System • SFP Technology Product Description VERSITRON FOM II Series Fiber Optic Teledata Modems are used to extend one 2-Wire analog telephone and/or RS485 or RS-422 data over duplex multi-mode or single-mode fiber. The F270xAD functions as the exchange side modem while the F271xAD functions as the subscriber side modem. For intercom or ring-down applications, the F271xAD is used at each end of the connection. An RJ-11 connector provides the copper interface for the telephone input and an RJ-45 connector provides the copper interface for the RS-485 or RS-422 data. LC fiber connectors provide the fiber optic interface. VERSITRON FOM II Series Fiber Optic Telephone Modems digitizing process allows for a fully transparent fiber optic link. LED indicator lights are used as status indicators on the F270xAD and F271xAD as follows: • LINK - Indicates the remote link is active and synchronized • SYSTEM - Indicates the system is active and configured (ready for operation) • TX - Indicates data is being transmitted • RX - Indicates data is being received • 1 - Indicates the status of the telephone line connected to Port 1 (On-Hook, Off-Hook, Ringing) Product Models Model Function Connector Fiber Cable Wavelength Max Distance F2702AD Fiber Optic Teledata Modem - Exchange Side LC MM 1310nm 2 km F2705AD Fiber Optic Teledata Modem - Exchange Side LC SM 1310nm 20 km F2712AD Fiber Optic Teledata Modem - Subscriber Side LC MM 1310nm 2 km F2715AD Fiber Optic Teledata Modem - Subscriber Side LC SM 1310nm 20 km NOTE: The new F270xAD and F271xAD modems are not backwards compatible with the F270x and F271x modems. VERSITRON, Inc. 83 Albe Drive ● Suite C ● Newark, DE 19702 Tel: 302-894-0699 Fax: 302-894-0624 Toll Free: 800-537-2296 www.versitron.com JUN2015 F270xAD & F271xAD TELEDATA FIBER OPTIC MODEM Safeguarding Communications Since 1958 FOM II Series - F270xA / F271xA Fiber Optic Telephone Modems General Specifications: Dimensions 11 x 7 x .875in / 27.9 x 17.8 x 2.1cm (LxWxH) Weight Operating Temperature Storage Temperature Humidity 0.28 kg (10 oz) 0° to 50°C (32° to 122°F) -40° to 70°C (-40° to 158°F) Up to 95% relative humidity (non-condensing) Altitude Up to 10,000 ft Electrical Interface: Power Requirements 12VDC, 1.0Amp Connectors Audio Signal Idle Channel Noise Single Frequency Distortion 2nd Harmonic Distortion Talk Battery Loop Current Ring Signal Line Impedance RS-485/RS-422 Data Rate Phone: RJ-11, 2-Wire / Data: RJ-45 Analog, 300Hz to 3.4KHz -65dBm -46dBm -55dBm 44 to 52VDC 40mA max. (off hook) 92Vpeak (max), 15 to 67Hz 600Ω Up to 64Kbps Accessories: Model Description HF-1 HF-2SS Single Card Enclosure 2-Slot 19” Rack-Mount Chassis HF-20A VMX20 20-Slot 19” Rack-Mount Chassis VERSIMUX II 20-Slot 19” Rack-Mount Chassis Redundant Power Supply / System Monitor for HF-20A & VMX20 Chassis 110VAC to 12VDC Power Adapter 220VAC to 12VDC Power Adapter Single-Slot Blank Panel for HF-2SS or HF-20A Chassis Double-Slot Blank Panel for HF-20A Chassis AC300WR PSAC08 PSAC09 ADPHF01 ADPHF02 VERSITRON, Inc. 83 Albe Drive ● Suite C ● Newark, DE 19702 Tel: 302-894-0699 Fax: 302-894-0624 Toll Free: 800-537-2296 www.versitron.com JUN2015 F270xA & F271xA TELEDATA FIBER OPTIC MODEM