Transcript
SFP Fiber Optic Transceivers TGCxxxx-RL80
1 Gbps CWDM Optical Transceiver Module
FEATURES •
125 Mbps data throughput
•
1 Gbps data throughput
•
15 CWDM ITU grid wavelengths
•
Pluggable SFP MSA footprint
•
Duplex LC connector
•
Very low jitter
•
Metal enclosure for lower EMI
•
3.3 V power supply with low power dissipation
PRODUCT OVERVIEW TGCxxxx-RL80 series CWDM Optical Transceiver Modules are ideally suited for the high-speed communications required for many of ARRIS’ digital networking products, and are intended for indoor use in products such as ARRIS’s GT3410A T1/E1 Access Module or the MC1810M or MC2710B Media Converter. Conforming to the Small Form Factor Pluggable (SFP) Multisource Agreement, these state-of-the-art plug-in components are designed for applications that require rates of up to 1.25 Gbps, with the laser transmission portion of the device operating at one of 15 available ITU-compliant (G.694.2) CWDM wavelengths. The modules are supplied with a duplex LC connector.
Ask us about the complete Access Technologies Solutions portfolio:
Fiber-Deep
DOCSIS® 3.1
Node Segmentation
SFP Fiber Optics-TGCxxxx-RL80
HPON™/RFoG
FTTx
TGCxxxx-RL80
TGCxxxx-RL80 series modules feature a very low jitter contribution, resulting in extremely clean, high-quality eye patterns. And the modules’ metal enclosure not only makes them sturdier, but also improves their FCC test margins. This emission and ESD control is particularly important in applications with sensitive multiport hubs and switches. The module dissipates less than 1 W and the Class 1 laser transmitter complies with applicable safety standards (IEC 60825-1 and 21 CFR 1040.10 and 1040.11).
SPECIFICATIONS Characteristics
Specification
Physical Dimensions Weight Environmental Application temperature range Storage temperature range Humidity Optical Interface Optical connectors Power requirements Input voltage Power consumption General Link budget (on SMF-28 or equivalent)
2.24” L x 0.34” H x 0.56” W (5.7 cm x 0.9 cm x 1.4 cm) 0.1 lbs (0.05 kg) –20° to +65°C (–4° to +149°F) –40° to +85°C (–40° to +185°F) 5% to 95% non–condensing Duplex LC 3.3 VDC 1 W max • For CWDM wavelengths 1270-1350 nm: 80 km • For CWDM wavelengths 1430-1610 nm: 120 km 32 dB min 1.25 Gbps max
Link loss budget (SFP to SFP) Data rate Hot plug–in/out Optical Transmitter: Type CWDM optical wavelengths (per ITU-T G.694.2)
Uncooled CWDM DFB 15 wavelengths in two ranges from 1270 to 1350 nm and from 1430 to 1610 nm (20 nm spacing between center wavelengths) 0 dBm min 9.0 dB min 2 dB max (measured with a PRBS of 27-1 at 1.25 Gbps and 1x10-12 BER)
Output power Extinction ratio (ER) Dispersion penalty (at 120 km) Receiver: Optical wavelength Sensitivity Input power
1260 nm min, 1620 nm max –32 dBm min –7 dBm max Warning: Exceeding the specified maximum input power will cause permanent damage to the device
Regulatory Class 1 devices per FDA 21 CFR 1040.10 and 1040.11, and IEC 60825-1 laser safety regulations.
RELATED PRODUCTS GT3410A
Ask us about the complete Access Technologies Solutions portfolio:
Fiber-Deep
DOCSIS® 3.1
Node Segmentation
SFP Fiber Optics-TGCxxxx-RL80
HPON™/RFoG
FTTx
TGCxxxx-RL80
ORDERING INFORMATION
T
G
C
*
*
*
*
–
R
L
8
0
1 Gbps CWDM Optical Transceiver Module CWDM Wavelength (1270, 1290, 1310, 1330, 1350, 1430, 1450, 1470, 1490, 1510, 1530, 1550, 1570, 1590 or 1610 nm) Duplex LC Connector, 80 km Link Length
Note: Specifications are subject to change without notice. Copyright Statement: ©ARRIS Enterprises, LLC, 2016. All rights reserved. No part of this publication may be
Customer Care
reproduced in any form or by any means or used to make any derivative work (such as translation, transformation, or adaptation) without written permission from ARRIS Enterprises, LLC (“ARRIS”). ARRIS
Contact Customer Care for product information and sales: • United States: 866-36-ARRIS • International: +1-678-473-5656
reserves the right to revise this publication and to make changes in content from time to time without obligation on the part of ARRIS to provide notification of such revision or change. ARRIS and the ARRIS logo are registered trademarks of ARRIS Enterprises, LLC. Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks or the names of their products. ARRIS disclaims proprietary interest in the marks and names of others. The capabilities, system requirements and/or compatibility with third-party products described herein are subject to change without notice. 87-10482-RevC_TGCxxxx-RL80_TransceiverPlugin
Ask us about the complete Access Technologies Solutions portfolio:
Fiber-Deep
DOCSIS® 3.1
Node Segmentation
05/2016 ECO 9892 SFP Fiber Optics-TGCxxxx-RL80
HPON™/RFoG
FTTx
