Transcript
WARNINGS
OPTIONAL MOUNTING KITS
PART DESCRIPTION
✗
DO NOT ALLOW CHILDREN OR PETS TO SWING ON THE CLOTHESLINE OR ITEMS OF LAUNDRY.
✗
DO NOT USE FOR ANY PURPOSE OTHER THAN TO HANG AND DRY WASHING.
✗
DO NOT USE YOUR RETRACTING CLOTHESLINE IF PARTS ARE WORN OR DAMAGED.
✗
DO NOT OPERATE THE LOCKING HANDLE WHEN THE ARM IS LOCATED IN THE CABINET.
CONGRATULATIONS ON THE PURCHASE OF YOUR NEW HILLS RETRACTING CLOTHESLINE, WHICH WILL BRING YOU MANY YEARS OF TROUBLE-FREE AND EFFICIENT OUTDOOR DRYING. IT IS IMPORTANT THAT YOU READ THIS OWNERS MANUAL
✗
AND WARNINGS THOROUGHLY BEFORE ASSEMBLING AND USING THE RETRACTING CLOTHESLINE. IN THIS WAY YOU WILL BENEFIT FROM ALL OF THE DESIGN FEATURES AND ENJOY SAFE AND EFFICIENT USE OF THE PRODUCT.
✗
DO NOT RELEASE THE LOCKING MECHANISM WHEN THERE ARE CLOTHES ATTACHED TO THE LINES. DO NOT ALLOW THE ARM AND LINES TO RETRACT UNCONTROLLED AS THIS MAY LEAD TO PERSONAL INJURY OR PROPERTY DAMAGE. HOLD THE ARM SECURELY AND WALK IT BACK TO THE CABINET.
THANK YOU FOR CHOOSING HILLS
PART NAME
— —
TOP POST SECTION BOTTOM POST SECTION
1 1
ACCESSORY PACK
— 12 436 779 33 426
COLLAR BOLT 1/4” BSW x 2 1/2” HEX NUT 1/4” UNC NYLOC POST CAP 50mm SQ. BOLT 5/16” x 2 3/4” HEX NUT 5/16” BSW HEX
1 2 2 1 2 2
CABINET MOUNTING BAR ORDER FD51008 FD51016
— — —
4 LINE MOUNTING BAR 6 LINE MOUNTING BAR
1 1
ACCESSORY PACK
30 34 36 426 500 665
BOLT 5/16” BSW x 2”HEX BOLT 5/16” BSW x 3” HEX BOLT 5/16” BSW x 3 1/2”HEX NUT 5/16” BSW HEX WASHER 5/16” x 1”x 14g PLUG 1”SQ PLASTIC
2 2 2 4 4 2
GROUND SOCKET ORDER FD51012
—
GROUND SOCKET
1
POST KIT — ONE PIECE ORDER FD51004
—
SINGLE POST SECTION
1
780 426 34
POST CAP 60mm SQ. NUT 5/16” BSW HEX BOLT 5/16” BSW x 3”HEX
1 2 2
REFER TO INSTRUCTION SHEETS PROVIDED WITH OPTIONAL MOUNTING KITS FOR INSTALLATION.
SPARE PARTS
HILLS GUARANTEE HILLS INDUSTRIES LIMITED undertake that if any part of its manufacture has failed to operate correctly due to faulty workmanship or defective material, it will repair or replace the part free of cost for a period of TEN (10) years from the date of purchase of the article, given fair wear and tear. The line is also guaranteed for a period of ONE (1) year. Evidence of unfair usage or incorrect adjustment by the owner will void this promise. HILLS INDUSTRIES LIMITED will not be responsible for any costs in connection with freight or postage, or for the expenditure necessary to dismantle the article, replace the part in position and re-assemble the article.
OPTIONAL GROUND SOCKET - FD51012
TOP POST
KIT NO.
SPOOL ASSEMBLY & LINE
POST
FD901715
HILLS INDUSTRIES LIMITED does not recommend the application of a ‘canopy’ on any of their outdoor dryer range.
SINGLE POST
SLOPE CEMENT AWAY FROM SOCKET FOR DRAINAGE
This guarantee is in addition to any rights or remedies conferred on the consumer by the Trades Practices Act or state laws. As a proudly Australian manufacturer, Hills is committed to providing you complete customer satisfaction. If you have questions about this product, or find there are missing or damaged parts. PLEASE CALL Hills on 1300 300 819 (cost of a local call) for assistance during normal business hours.
OPTIONAL POST MOUNTS
SPARE PARTS ARE AVAILABLE FROM YOUR RETAILER
PART NAME
A MORE COMPREHENSIVE RANGE OF SPARE PARTS IS AVAILABLE UPON REQUEST. PLEASE CALL HILLS CONSUMER ADVICE CENTRE ON 1300 300 564 (COST OF A LOCAL CALL) FOR ASSISTANCE DURING NORMAL BUSINESS HOURS OR VISIT www.hills.com.au.
GROUND LEVEL
BOTTOM POST
GROUND SOCKET
Unless any addition or attachment to this product has HILLS specific approval or is sold as a HILLS product the warranty on this product is waived. This product is designed to perform a specific task under established test loads and unauthorised attachments may produce stresses for which the design is not appropriate.
800mm
Design, specifications and colours are subject to change without notice.
150mm GRAVEL
RETRACTING CLOTHESLINE CHECKLIST
HILLS INDUSTRIES LIMITED A.B.N. 35 007 573 417 ISSUE 10/02/05
CONTENTS OF CARTON PART DESCRIPTION CARTON PACK
IMPORTANT: Please retain this owners manual for spare parts identification.Record the following information from the carton for future reference.
ACCESSORY PACK Product Number:
FD..................................................
Record date of purchase .............................................. Name and location of store ................................................................................................................................
KEY No.
PART NAME
QTY
— —
EXTENDALINE CABINET ACCESSORY PACK
1 1
—
RECEIVING BRACKET WASHER 5/16”x 1” ZP WASHER 5/16”x 3/4” ZP HANDLE FLANGED NUT CSK SCREW M6 x 35
1 2 4 1 2 2
500 546
Ø200
DO NOT USE BEFORE 48hrs
INSTALLATION INSTRUCTIONS INCLUDED IN GROUND SOCKET KIT
QTY
POST KIT — TWO PIECE ORDER FD51006
ACCESSORY PACK “PATENTS AND REGISTERED DESIGNS APPLY TO THIS PRODUCT”.
KEY No.
FD51004 ONE PIECE POST KIT
FD51006 TWO PIECE POST KIT
INSTALLATION INSTRUCTIONS INCLUDED IN POST MOUNT KIT
SITE LOCATION
MOUNTING COMBINATIONS & FIXING REQUIREMENTS
2
1 WALL TO WALL (AS SUPPLIED)
TYPE 1
FIT PLASTIC HANDLE TO ARM
IMPORTANT: SELECT A SUITABLE SITE TO INSTALL YOUR NEW RETRACTING CLOTHESLINE DRYER. DETERMINE WHICH MOUNTING METHOD YOU WANT TO USE AND FOLLOW THE SIMPLE INSTRUCTIONS DISPLAYED BELOW AS SHOWN IN FIG 1. DO NOT EXCEED 6.5 METRES BETWEEN MOUNTING SURFACES. ALLOW 1.5 METRES SIDE CLEARANCE BETWEEN THE LINE AND WALL, FENCE, SHED ETC.
3 HANDLE
ARM TUBE
HANDLE
TYPE 2
4 M MINIMUM – 6.5M MAXIMUM
POST TO WALL
TYPE 4
1.5M FROM WALL OR FENCE BOTH SIDES
TYPE 2
50mm ABOVE USER HEAD HEIGHT
SCREWS
REQUIRES: 2 SUITABLE MASONRY ANCHORS 1 POST KIT 1 MOUNTING BAR KIT
REQUIRES: 4 SUITABLE MASONRY ANCHORS
WALL TO POST
TYPE 1
TYPE 3
SURFACE
REQUIRES: 2 SUITABLE MASONRY ANCHORS 1 POST KIT
INSERT THE FLANGED NUTS INTO THE HANDLE. ENSURE THAT THE EDGES OF THE FLANGED NUT SLIDE UP INTO THE RECESS OF THE HANDLE.
TYPE 3
FIG 1.
REQUIRES: 2 POST KITS 1 MOUNTING BAR KIT CLOTHESLINE
MOUNTING SURFACE
IMPORTANT MASONRY ANCHORS ARE NOT INCLUDED. CONSULT YOUR LOCAL HARDWARE DEALER FOR ANCHORS MOST SUITABLE FOR YOUR PARTICULAR APPLICATION.
4
WALL MOUNTED CABINET
(TYPE 1)
WALL MOUNTED RECEIVING BRACKET
(TYPE 2)
THIS SIDE TOWARDS CABINET
IMPORTANT: MAY NOT BE SUITABLE FOR MOUNTING ON TIMBER FRAME DWELLINGS UNLESS CABINET OR RECEIVING BRACKET IS MOUNTED DIRECTLY ONTO VERTICAL STUDS. NOT THE CLADDING.
5
RECEIVING BRACKET
REMOVABLE END COVERS
OPERATION
IMPORTANT: DO NOT operate the Locking Handle when the Arm is located in the Cabinet. DO NOT release the locking mechanism when there are clothes attached to the lines.
CABINET
TO EXTEND THE LINE: Pull the Arm from the Cabinet, holding it firmly, walk it down to the Receiving Bracket. See Fig 2.
FIG 2 546
TO ATTACH THE ARM: Grip the Arm with each hand either side of the Receiving Bracket. Place the Arm into the top of the bracket. Push against receiving bracket & pulling it down until it locks into place. See Fig 3 & 5.
ARM
546
RECEIVING BRACKET
MASONRY ANCHORS (NOT INCLUDED)
MASONRY ANCHORS (NOT INCLUDED)
END COVER SCREW
FIG 3 POST MOUNTED CABINET
(TYPE 4)
MOUNTING BAR FD51008 - 4 LINE FD51016 - 6 LINE
426 500 779 34 or 36
POST MOUNT RECEIVING BRACKET
(TYPE 3)
LOCKING HANDLE
426 RECEIVING BRACKET
546 500
426 33 or 34
2nd LOCK 1st LOCK
500
FIG 4
546 30 665 REMOVABLE END COVERS COVER SCREW POST KIT (NOT INCLUDED)
INSERT THE SCREWS INTO THE BACK OF THE ARM TUBE. ENSURE THAT THE HANDLE IS ON THE OUTSIDE FACE OF THE ARM TUBE. LOGO MUST BE UPRIGHT. PLACE THE HANDLE ONTO THE ARM TUBE & TIGHTEN UP THE 2 SCREWS.
ARM
POST TO POST
TYPE 4
FLANGED NUTS
MOUNTING
RECEIVING BRACKET UNLOCK POST KIT (NOT INCLUDED)
TO ENGAGE ROTATE HANDLE TO 1st LOCK POSITION OR 2nd LOCK POSITION TO RELEASE PULL OUT HANDLE AND ROTATE BACK TO THE UNLOCKED POSITION
TO LOCK AND TENSION THE LINE: When the Arm is engaged into the Receiving Bracket, rotate the Locking Handle located on the right hand side of the Cabinet from the unlocked position upwards and around until it snaps into the first lock position.This provides normal tension of the lines. See Fig 6. Check that the handle is locked by pulling firmly on the lines. See Fig 4 & 6. For extra tension of the lines, rotate the locking handle further until it locates into the second lock position. See Fig 6. TO UNLATCH THE ARM: WARNING: Ensure lines are not under high tension before unlatching the arm. Pull out locking handle and return to unlock position. See Fig 4 and Fig 6. On the Receiving Bracket, push base forwards with one hand and lift arm upwards with other hand. See Fig 7. IMPORTANT: Lines are under spring tension. DO NOT allow the arm and lines to retract uncontrolled as this may lead to personal injury or property damage. Hold the Arm securely and walk it back to the Cabinet.
FIG 5
2nd LOCK POSITION 1st LOCK POSITION
RELEASE
UNLOCKED
FIG 6
FIG 7
