Transcript
PDS-15 0e Color Kinetics® PDS-150e intelligent power/data supply is specifically designed for Color Kinetics bColor Series and iColor Series fixtures. PDS-150e provides a robust 150W power source and intelligent data drive circuitry. This data circuitry conditions data supplied from a DMX512 controller, including Color Kinetics full line of controllers, to a format compatible with the fixtures. This integration of power and data simplifies wiring installation. The 150W power source features a built-in ventilation fan in addition to an automatic over-temperture shut-off to protect it from damage due to overheating. The data drive circuitry has been specifically designed with short circuit protection to prevent failures due to incorrect wiring/installation. PDS-150e also features diagnostic LEDs to aid troubleshooting of Color Kinetics systems. PDS-150e automatically accommodates supply voltages ranging from 100VAC to 240VAC, which must be hard-wired to the supply. Light fixtures are hard-wired to screw terminal connectors for easy fixture disconnection and reconnection to output terminals. RJ45 data input and output connectors let you daisy-chain data from one power/data supply to another. A DMX repeater is provided to maintain the integrity of the data in large installations. The entire package is housed in a NEMA-style enclosure with 14 pre-formed knockout holes sized for standard conduit connectors, which comply with National Electrical Code (NEC) requirements. PDS150e is rated for indoor use only. For outdoor installations, a NEMA 4 (IP66) outdoor rated enclosure must be used. PDS-150e is outfitted for advanced Ethernet options using a Color Kinetics proprietary protocol. These control options are ideal for large installations. For more information, contact Color Kinetics. PDS-150e Specifications
100VAC to 240VAC auto ranging (50Hz –60Hz) Power factor correction (PFC) 2.8A (115V)/1.4A (230V)
power input
ITEM# 109-000008-01
heat dissipation For use under one or more of the following patents: U.S. Patent Nos. 6,016,038, 6,150,774 and other patents listed at http://colorkinetics.com/patents/. Other patents pending. ©2002-2005 Color Kinetics Incorporated. All rights reserved. Chromacore, Chromasic, CK, the CK logo, Color Kinetics, the Color Kinetics logo, Color Kinetics The Leader in Intelligent Light, ColorBlast, ColorBlaze, ColorBurst, ColorCast, ColorPlay, ColorScape, DIMand, Direct Light, EssentialWhite, eW, iColor, iColor Cove, IntelliWhite, iW, iPlayer, Light Without Limits, Optibin, Powercore, QuickPlay, Sauce, the Sauce logo, and Smartjuice are either registered trademarks or trademarks of Color Kinetics Incorporated in the United States and/or other countries. BR0103 Rev 06 Specifications subject to change without notice. Refer to www. colorkinetics.com for the most recent version.
24VDC (150W Max.)
power output
25 percent of total power output
14°F
ambient operating temp
Data: Screw terminal or RJ45 input and output connectors Power: Screw terminal output connectors
connectors
to 122°F (-10°C to 50°C)
NEMA-style indoor rated enclosure; housing dimensions: 10.38" (26.37 cm) x 10.10" (25.65 cm) x 4.38" (11.13 cm)
housing
data interface
Color Kinetics full line of controllers or DMX512 (RS485) compatible
classification
Class 2 power supply
listings
UL/cUL, CE
Philips Solid-State Lighting Solutions • 3 Burlington Woods Drive • Burlington, MA 01803 • USA Tel 888 FULL RGB • Tel 617 423 9999 • Fax 617 423 9998 •
[email protected] • www.colorkinetics.com
PDS-150e
physical dimensions
TOP VIEW 10.38" 26.37cm
8.60" 21.84cm
10.10" 25.65cm
NOTE: Requires 4 inches open space on all vented sides 9.24" 23.47cm (SHOWN WITHOUT COVER) SIDE VIEW
FRONT VIEW
4.38" 11.13cm
Ø1.75" 4.45cm
Ø0.88" 2.24cm PDS-150e item# 109-000008-01 data connector
Input and output via RJ45 or screw terminals
output connector
Screw terminals
supply connector
Flying leads
weight
8 lb. (3.6 kg)
Philips Solid-State Lighting Solutions • 3 Burlington Woods Drive • Burlington, MA 01803 • USA Tel 888 FULL RGB • Tel 617 423 9999 • Fax 617 423 9998 •
[email protected] • www.colorkinetics.com
PDS-150e
functional flow diagram
FROM CONTROLLER
DATA TERMINATOR
FUSE
ETHERNET
24V DATA COM DMX IN
DMX LOOP OUT
DMX OUT REPEATER 24V
OUTPUT FAULT
DATA
ETH RX
COM
ETH TX DATA POWER
DATA/24VDC TO LIGHTS
FUSE 24V
DIAGNOSTIC INDICATOR LIGHTS
DATA COM
24V DATA COM
FUSE 24V DATA AUX IN
COM
COM
FROM CONTROLLER
DATA DATA + 24V
24V DATA COM
COM
RING TERMINAL
N
100-240VAC
L
For complete installation instructions and safety precautions, refer to the PDS-150e User Guide and wiring diagrams located at www.colorkinetics.com/support.
Philips Solid-State Lighting Solutions • 3 Burlington Woods Drive • Burlington, MA 01803 • USA Tel 888 FULL RGB • Tel 617 423 9999 • Fax 617 423 9998 •
[email protected] • www.colorkinetics.com
PDS-150e
functional flow detail
COLORBLAST 6
RED
WHT RED
WHT RED
BLK
BLK
BLK
WHT
WHT
WHT
RED
RED
RED FUSE BLOCK
FUSE BLOCK
BLK
BLK
BLK
WHT
WHT
RED
RED
RED
BLK
BLK
BLK
WHT
WHT
WHT
RED
RED
RED FUSE BLOCK
BLK
BLK
BLK
WHT
WHT
RED
RED
RED
BLK WHT
DMX OUT REPEATER
DMX LOOP OUT
ETHERNET
BLK WHT
ETHERNET
BLK WHT
FUSE BLOCK
TO RUN OF COVE/FRESCO UP TO 12 FEET
COVE/FRESCO WIRE COLORS (RED, BLUE, BLACK) WIRE AS FOLLOWS: BLK = BLK BLUE = WHT RED = RED
FUSE BLOCK
WHT
RED
TO RUN OF COVE/FRESCO UP TO 12 FEET FUSE BLOCK
WHT
FUSE BLOCK
6" COVE: 2 RUNS OF 16 PER PDS-150e 12" COVE: 2 RUNS OF 12 PER PDS-150e FRESCO: 2 RUNS OF 12-FEET PER PDS-150e 1 PER FUSE BLOCK
BLK AUX IN
AUX IN
WHT
iCOLOR COVE/FRESCO
6 PER PDS-150e 2 PER FUSE BLOCK
BLK
RED FUSE BLOCK DMX OUT REPEATER
DMX IN
DMX LOOP OUT
ETHERNET
3 PER PDS-150e 1 PER FUSE BLOCK
RED FUSE BLOCK DMX OUT REPEATER
DMX IN
COLORBURST 4
WHT RED
BLK
BLK
WHT
WHT
RED
RED FUSE BLOCK
FUSE BLOCK
BLK
BLK
WHT
WHT
RED
RED
BLK
BLK
WHT
WHT
RED
RED FUSE BLOCK
BLK
BLK
WHT
WHT
RED
RED
BLK WHT
RED FUSE BLOCK DMX OUT REPEATER
DMX LOOP OUT
DMX IN
DMX OUT REPEATER
DMX LOOP OUT
(Use on every 32nd PDS-150e in large installations)
DATA IN FROM PDS-150e OR CONTROLLER DATA IN FROM PDS-150e OR CONTROLLER
DATA OUT TO NEXT PDS-150e
DMX LOOP OUT
DATA IN FROM PDS-150e OR CONTROLLER
DMX IN DMX OUT REPEATER
DMX LOOP OUT
DMX IN
ETHERNET
DMX OUT REPEATER
DATA OUT TO NEXT PDS-150e
ETHERNET
ETHERNET
TERMINATOR
DMX IN
LARGE CHAIN
DAISY-CHAIN
DMX CONTROLLER
RED FUSE BLOCK
ETHERNET
BLK WHT
ETHERNET
FUSE BLOCK
NOTE: iColor Accent cannot be used with the PDS-150e
AUX IN
RED
DMX IN
6 PER PDS-150e 2 PER FUSE BLOCK
BLK AUX IN
WHT
DMX LOOP OUT
COLORBURST 6
12 PER PDS-150e 4 PER FUSE BLOCK (2 PER TERMINAL)
BLK
AUX IN
COLORBLAST 12 BLK
DMX OUT REPEATER
DMX LOOP OUT
DMX IN
For complete installation instructions and safety precautions, refer to the PDS-150e User Guide and wiring diagrams located at www.colorkinetics.com/support.
Philips Solid-State Lighting Solutions • 3 Burlington Woods Drive • Burlington, MA 01803 • USA Tel 888 FULL RGB • Tel 617 423 9999 • Fax 617 423 9998 •
[email protected] • www.colorkinetics.com
