Transcript
PEAK 887VL2
PICMG 1.3 Full-size SBC with Intel® Q87 Support 4th Generation Intel® Core™ i7/i5/i3 Processors
Main Features Scalable platform 4th generation Intel® Core™ i7/i5/i3 processor + Non-ECC Intel® Q87 PCH chipset support PICMG 1.3 specification Support Dual channel DDR3L with NON-ECC DIMMs 1333/1600MHz up to 16GB
Support PCIex16, 4 x PCIex1, 4 x USB3.0/4 x USB2.0, 4 x SATA 3.0/ 2 x SATA 2.0 and GbE Display support for VGA, DVI, HDMI Dimension 338.58 x 126.39mm2 (W x L) (8 Layers Single side)
Product Overview The PEAK 887VL2 is a PICMG1.3 Full-size single computing board featuring Intel® Q87 PCH chipset supports 4th generation Intel® Core™ processor with Dual DDR3L DIMM socket up to 16GB DDR3 1333/1600MHz SDRAM with Non-ECC support and integrated HD Graphic controller. The Intel® Q87 PCH manages SATA 2.0/3.0 Ports. Furthermore, it supports others versatile I/O ports such as legacy four series ports, KB/Mouse interface, optional TPM function, eight USB ports, four PCI express x1 interface and two Intel® PCI express Gigabit LAN port. It offers a great solution for advance industrial application that requires superb display and processing performance.
Specifications CPU Support
On-board LAN
4th generation Intel® Core™ i7/i5/i3 processor (95W/ 65W/ 45W/ 35W) TDPs, Socket LGA1150
Main Memory 2 x DIMM, support Dual channel DDR3L (default)/DDR3 NON-ECC DIMM (dual voltage models by auto detection for DDR3 and DDR3L Maximum 16 GB – 1066/1333/1600 MT/S
Platform Control Hub Intel® Q87 Express Chipset PCH
BIOS AMI system BIOS 16MBit SPI depended on AMT function Dual BIOS for Four PCIex1 and One PCIex4 (setting by DP switch)
Display The Processor Graphics contains a refresh of the seventh generation graphics Intel® HD Graphics GT1/GT2 Share system memory Analog Display Support Drive a standard progressive scan analog monitor
Audio Reverse HDA interface, 2.0mm 2 x 5 pin header
PICMG 1.3
1 x Intel® I217LM GbE PHY 1 x Intel® I211 Gigabit Ethernet Controller RJ45 with LED connecter x 2 Support Boot From LAN (PXE) RJ45 LED Support Wake on LAN Extra (External) LED: 2 x 4 pin header
I/O Interface
ITE8783 PS2 KB/MS reserve 1 x6 (2.0m) JST connector 26-pin Box Header x 1 (2.0mm) SIO Box Header x 4 (2.0mm), COM1,3,4 support RS232, COM2 RS232/422/485, RI pin can be select RI/5V/12V with jumper (2 x 3 pin 2.0mm pin-header) 4 Ports USB2.0 and 4 ports USB3.0: 2 ports through 2.5mm JST Connectors, located near Rear Side of PCB (near CPU, USB3.0) 4 ports through backplane (USB2.0) 2 ports through I/O bracket (USB3.0) 4-pin FAN connector x 2 (for CPU,System) On board pin header for IrDA Tx Rx 1 x5/2.54mm pin-header HDD LED/Power LED/Power ON SW/ Reset SW On Board buzzer
www.nexcom.com
Repeater
PEG[0:15]
Haswell (DT)
DP B
DP B
HDMI/DVI HEADER
FDI
JST Connector (USB2.0 x 2)
Q87 only
backplane (USB2.0 x 4)
VGA
DMI
USB 3.0(4)
FDI
PORT(3~4)
PORT4~PORT5
DDR3 1066/1333/1600 MT/s DIMM2
PCI-E *1 (8)
JST Connector (USB2.0 x 2)
DDR3 CHB
Lynx point (Q87/H81)
PORT6~PORT7
PORT8~PORT11
PIN HEADER (2.54mm 2x5)
SATA 3.0(6)
Q87 only
USB 2.0(14)
BOX Header (USB3.0 x 2)
PORT(1~2)
DDR3 1066/1333/1600 MT/s DIMM1
Maximum support 16GB
DMI x4
HDA
BP Connector (USB3.0 x 2)
DDR3 CHA
DMI
FDI x 2
VGA CONNECTOR
DDR3 CH A
VCCIN
DDR3 CH B
VR12.5
DP C DP D
PCIEx 16 SLOT1
PEG
Block Diagram
LPC
SPI
BIOS/ME SPI ROM
H/W Monitor +3.3V, +5V, +12V, Vcore COM1,2,3,4 BOX HEADER COM2 RS232/RS422/RS485
Power Requirements
PCIe x 4 SHB GFA
BUS(5)
IT 8892
BUS(6)
INTEL I217LM GbE PHY
RJ45 Connector
BUS(7)
INTEL I211 GbE Controller Q87 only
RJ45 Connector
SATA 0~1
FP Connector (SATA3.0 x 2)
SATA 2~3
FP Connector (SATA3.0 x 2)
SATA 4~5
backplane (SATA3.0 x 2)
PCI BUS
PCI GF
Q87 only
PS2 KB/MS JST Connector
SUPER I/O IT8783E/AX-L
USBx1/USBx1/LAN1 RJ45 x1/LAN2 RJ45 x1/VGA DB15 from top to down
BUS(1~4)
Parallel Port 26-pin Header x 1 (2.0mm)
Ordering Information PEAK 887VL2 (P/N: 10P0887VL00X0)
Power source from Backplane through Golden Finger and AUX +12V Support ATX/AT function by jumper setting BIOS default is (ATX MODE)
PICMG 1.3 Full-size SBC, 4th Generation Intel® Core™ i7/i5/i3 processor, LGA1150, With Max 16GB, DDR3L/DDR3 DIMM, VGA integration, Intel® Gigabit Ethernet x2, USB3.0 x4, SATA 3.0 x4
Dimensions 338.58mm x 126.39mm, 8 layers (single side)
Environment Board Level Operating temperatures: -15°C to 60°C Storage temperatures: -20°C to 85°C Relative humidity: 10% to 90% (operating, non-condensing) 5% to 95% (non-operating, non-condensing)
Certifications CE approval FCC Class A CB/CCC certification
PICMG 1.3 We reserve the right to change specifications and product descriptions at any time without prior notice.
Last update: 05/19/2015
