Transcript
PEAK 888VL2
PICMG 1.3 Full-size SBC with Intel® Q170/H110 Support 6th Generation Intel® Core™ i7/i5/i3 Processors
Main Features Support 6th generation Intel® Core™ i7/i5/i3 processor Support Intel® Q170/ H110 PCH chipset PICMG 1.3 specification Support Dual channel DDR4 with non-ECC DIMMs 1866/2133MHz up to 32GB
Support PCIe 3.0 SATA 3.0 W/RAID 0,1,5,10, M.2 NVMe Support display for VGA, DVI/HDMI, DP Support Intel® AMT 11 & TPM 1.2/ 2.0 (optional)
Product Overview The PEAK 888 is a PICMG1.3 Full-size Single-Board Computing .It equipped with Intel® 6th generation Core™ i7/i5/i3 processors and Intel® Q170/ H110 chipset. It comes with Dual DDR4 DIMM socket up to 32GB DDR4 1866/2133MHz with Non-ECC support and integrated HD Graphic controller. The PEAK 888Q SKU with Intel® Q170 PCH providing high performance and rich expansion. The SATA3.0 ports with RAID 0, 1, 5 and 10 helps provide quick access to data files and data protection. Furthermore, the advanced storage capabilities with Intel® RST features PCIe Gen3 x4 on NGFF M.2 form factor (2280, 22110) to maximizes storage performance and it also features an integrated Intel® AMT 11 for easier maintenance. The PEAK 888H SKU with Intel® H110 PCH provides high performance and cost effective solution.
Specifications CPU Support
Audio
6th generation Intel® Core™ i7/i5/i3 processor (65W/ 35W) TDPs, socket LGA1151
High definition audio interface (compatible with NEXCOM audio daughter board PN: 10E000HDA00X0 EBK-HAD)
Main Memory 2 x DIMM, support Dual channel DDR4 NON-ECC DIMM 1866/2133 MT/S (Maximum32GB)
Platform Control Hub Intel® H110 express chipset PCH Intel® Q170 express chipset PCH
BIOS AMI system BIOS 16MBit SPI depended on AMT function Dual BIOS for four PCIex1 and one PCIex4
Display The processor graphics contains a refresh of the ninth generation graphics Intel® HD graphics 530 Support independent triple display. VGA: resolution up to 1920*1200 pixels @60MHz DVI: resolution up to 1920*1200 pixels @60MHz HDMI: resolution up to 4096*2304 pixels @60MHz DP: resolution up to 4096*2304 pixels @60MHz * Supporting 4K display required two DDR channels of same size
PICMG 1.3
On-board LAN
1 x Intel® WG1219LM GbE PHY (PEAK 888Q support Intel® AMT 11) 1 x Intel® I211 gigabit Ethernet Controller RJ45 with LED connecter x 2 Support boot from LAN (PXE) Support wake on LAN
I/O Interface 1 x PCI express x16 and 1 PCI express x4 to backplane 4 x PCI to backplane PEAk 888VL2-Q -- 5 x SATA 3.0 port (2 x SATA 3.0 to BP through BIOS setting) -- 1 x M.2 2280/ 22110 M Key (NVMe Gen 3 PCIex4) -- Support RAID 0/1/5/10 -- SIO: ITE8786 , COM 1,3,4 support RS232 , COM2 support RS232/422/485 can be selected RI/5V/12V through jumper -- PS2 KB/MS *1 JST connector -- Parallel port: 26-pin box header x 1 -- 6 ports USB 2.0 and 4 ports USB 3.0 2 ports USB 2.0, 2 ports USB 3.0 1 port USB 2.0 type A (PEAK 888Q only)
www.nexcom.com
Block Diagram
DP HEADER
DP D
HDMI/DVI HEADER
DP C
DP C DP D
DP B
DP B
PEG[0:15]
VGA
CH7517
SKYLAKE-S Socket:1151 pin
Maximum support 16GB
DDR4 CH A
PCIEx 16 GFA
PEG
VCCIN
DDR4 CHA
DDR4 1866/2133 MT/s U-DIMM
DDR4 CH B
IMVP8
DDR4 CHB
DDR4 1866/2133 MT/s U-DIMM
DMI DMI x4 BUS(1~4)
PCIe x 4 SHB GFA
BUS(5)
IT 8892
BUS(6)
INTEL I219LM GbE PHY
RJ45 Connector
BUS(7)
INTEL I211 GbE Controller
RJ45 Connector
PORT4~PORT5
TYPE A Connector Q170 only (USB2.0 x 1)
PORT6
backplane (USB2.0 x 4)
PORT7~PORT10
PCI-E *1 (11)
JST Connector (USB2.0 x 2)
H110/Q170
PIN HEADER (2.54mm 2x5)
LPC
CBTL02042ABQ (Switch)
M.2 Key M Connector PCIE x4 Q170 only
FP Connector (SATA3.0 x 2)
Q170 only backplane (SATA3.0 x 2)
SATA 3~4
BIOS/ME SPI ROM SATA 5
SUPER I/O IT8786E/AX-L
COM1,2,3,4 BOX HEADER COM2 RS232/RS422/RS485
-----
PCI GF
SATA 0
SATA 1~2
SPI
Debug/TPM HEADER (2.00mm 1x12)
H/W Monitor +3.3V, +5V, +12V, Vcore
PCI BUS
BUS(8~11)
SATA 3.0(5)
PORT(3~4)
USB 2.0(14)
PORT(1~2)
BOX Header (USB3.0 x 2)
HDA
USB3 Connector (USB3.0 x 2)
USB 3.0(4)
DMI
4 ports USB 2.0 through backplane 2 ports USB 3.0 through I/O bracket 2*10 pin header to support TPM module 2 x Smart FAN connector (for CPU, system) On-board buzzer Watchdog time out can be programmable by software from 1 second to 255 seconds
Power Requirements
CBTL02042ABQ (Switch)
FP Connector (SATA3.0 x 2)
FP Connector (SATA3.0 x 1)
PS2 KB/MS JST Connector Parallel Port 26-pin Header x 1 (2.0mm)
Ordering Information PEAK 888VL2-Q (P/N: 10P00088801X0) PICMG 1.3 Full-size SBC,Q170, Intel® LGA1151, DDR4 DIMM, support triple display, LAN x 2, USB 3.0 x 4, SATA 3.0 x 5, M.2 (support PCIe storage)
PEAK 888VL2-H (P/N: 10P00088800X0)
Power source from backplane through golden finger and AUX +12V Support ATX/AT function by jumper setting BIOS default is (ATX MODE)
PICMG 1.3 Full-size SBC,H110, Intel® LGA1151,DDR4 DIMM, support dual display, LAN x 2, USB 3.0 x 4, SATA 3.0 x 4 , M.2 (support SATA storage)
Dimensions 338.58 mm x 126.39 mm, 8 layers (single side)
Environment Board level operating temperatures: -20°C to 60°C Storage temperatures: -20°C to 85°C Relative humidity: 0% to 90% (operating, non-condensing) 0% to 95% (non-operating, non-condensing)
Certifications CE approval FCC Class A CB/CCC certification
PICMG 1.3 We reserve the right to change specifications and product descriptions at any time without prior notice.
Last update: 08/18/2016
