Transcript
Box Contents:
Bluetooth Mouse, 2 AAA Batteries, Carry Pouch &
Quick Start Guide.
Technical Specifications Interface
Bluetooth
Operational Distance Mouse speed Ideal working conditions
Upto 10 Metres 800 - 1200 - 1600 DPI adjustable 5 C 50 C 10% 85% RH 25 C 89 x 50 x 32mm 30 Million clicks
Product Dimensions Button Life
System Requirements Bluetooth enabled PC’s, Notebooks, Net books or Tablets running Windows 7, Windows Vista, Windows XP Sp2 or later, Mac OS 10.3 or later. Will also work on some Android Devices (please refer to device specifications).
Amkette’s Pearl Bluetooth Mouse is a smart fusion of a fast optical engine and advanced Bluetooth Technology. Use of Bluetooth Technology ensure that you no longer require a USB dongle occupying a precious port in your Laptop, Netbook or Tablet. Just sync it with your device once, and it is instantly paired forever. In addition the Smart Power Saving feature with a manual On/Off switch should insure a long-lasting and enjoyable computing experience.
Warranty Statement The Pearl Bluetooth Mouse is backed by a 3 Year performance warranty against any manufacturing defects in material or workmanship from the date of original purchase. This warranty entitles the purchaser to get the product repaired or replaced under the following conditions : The warranty applies to the original purchaser. Proof of original purchase is required. The warranty does not cover the damage caused by misuse, abuse or improper storage. In no event shall Amkette be responsible for any direct, incidental, consequential or other damages of any kind. Please contact our Technical Support Line and/or send the defective product, postage pre-paid, together with the proof of purchase to our Customer Care Service Center to avail warranty service. Return postage will be paid by us. Customer Care Service Center Amkette House, C-64/4, Okhla, Phase-II, New Delhi-110020
Quick Start Guide -1-
-4-
Dynamic Tracking Identifying the Parts
1 Left Click Button
DPI is described by how many counts are sent to the controller chip when the mouse moves one inch. As the DPI increases, the smoothness, sensitivity and speed of the mouse increases as well. So at higher DPI values, large cursor movements require a relatively small mouse movement. The Pearl Bluetooth Mouse lets the user dynamically control the DPI of the mouse with a simple click of button. The mouse has three DPI modes – 800, 1200 and 1600.
ON/OFF Switch
Power Saving Mode
Optical Sensor
The Pearl Bluetooth Mouse uses the energy efficient 2.4 Ghz Radio Frequency and also has a Smart Energy saving feature. The mouse automatically enters power saving mode if it is not used for 1 minute. The mouse will exit power saving mode if any of the buttons on mouse is clicked or any movement of mouse is made. In addition the mouse also has a manual power switch.
7
Pairing Button
8
Open Button
b. c. d.
If the mouse is not used for an extended period, please remove the battery to avoid corrosion and damage. Keep the mouse away from extreme hot and extreme cold temperatures. Avoid leaving the mouse in direct sunlight. Keep the mouse away from liquids.
3 4
5
6
7
8
4 DPI Adjust Button/Light Indicator
6
Things to Remember
2
3 Right Click Button
5
a.
1
2 Scroll Wheel/ Middle Button
While pressing the open button, lift the top cover
B
C Place the top cover & press it down
D
A
Put the 2 AAA batteries with right polarity
How to Use
• • •
Ready to pair
Note: Mouse can be easily turned OFF by toggling the ON/OFF switch at the bottom.
Pairing Procedure
Troubleshooting 1. 2. 3. 4.
Please make sure the mouse is turned ON. Check the Batteries. Check mouse pairing status with the system. Make sure the Bluetooth drivers are correctly installed on your system.
Note: If in case the above steps don’t fix the problem, please contact our technical support @ +91-9312691448
-3-
1) Make sure the Bluetooth is turned ON on both devices. 2) Go to Bluetooth icon located on your PC/Laptop. 3) Press the pairing button of the Bluetooth mouse till the Blue light starts flashing. 4) Click on Add a Bluetooth device option and you will find “Optical Bluetooth mouse” on the screen. 5) Click next and if it asks for passkey then enter the passkey "0000"). 6) Your Bluetooth mouse is now paired and Enjoy the wireless freedom.
-2-