Transcript
PRODUCT SPECIFICATION
matrix systems and controls
MLZ6DT Control ZOOM LENS, MOTORIZED Product Features • Solid-State Electronics • 120 VAC Input • Supplied with 24 VAC Wall Transformer • For Use with Motorized Zoom Lenses • Ideal for Simple, Hard-Wire Control Applications
The MLZ6DT lens control is designed to provide remote control for Pelco’s motorized zoom lenses. Fully solid-state electronics provide the DC power to smoothly drive zoom, focus, and iris functions.
5.50 (13.97) ZOOM TELE
FOCUS IRIS NEAR OPEN
MANUAL ON AUT O WIDE
The MLZ6DT is supplied with a 24 VAC wall mount transformer power supply. Front panel switches provide control of zoom and focus functions, with optional manual control of the iris. Speed is adjustable through the front panel knob control. The MLZ6DT is ideal for simple video surveillance applications (single camera and monitor).
C516 / REVISED 5-20-08
FAR
CLOSE
8.90 (22.61) SPEED
1.75 (4.45)
OUTPUT
AC INPUT
NOTE: VALUES IN PARENTHESES ARE CENTIMETERS; ALL OTHERS ARE INCHES.
International Standards Organization Registered Firm; ISO 9001 Quality System
TECHNICAL SPECIFICATIONS MODELS
CERTIFICATIONS/RATINGS
MLZ6DT
Desktop zoom lens control module with auto/ manual iris control
• UL Listed • Meets NEMA Type 1 standards
Paddle switch TELE/WIDE Paddle switch NEAR/FAR Paddle switch OPEN/CLOSE Paddle switch AUTO/MANUAL Knob adjustment Rocker switch Light emitting diode (LED)
R300
CONTROLS
OPTIONAL ACCESSORIES
Zoom Focus Manual Iris Auto Iris Speed On/Off Pilot Lamp
Rack mount kit (1 RU) for up to three control modules.
ELECTRICAL Input Voltage Power Consumption Output Voltage Circuit Power Supply Output Connector Cable Requirements Cable Distances
120 VAC, 50/60 Hz 3 to 6 watts ±2 to 12 VDC Full wave power supply with solid-state drive 24 VAC, 400 mA wall mount transformer AMP CPC type, 14 pin (mate supplied) Four conductors plus ground; one additional conductor for manual override The following distances are approximate maximum recommended under the following conditions: – Based on a 35 mA load at 9 VDC – Single lens function activation – Single common conductor in lens cable – 10% loss in voltage at the lens motor 22 AWG (0.3 mm2) 20 AWG (0.5 mm2) 18 AWG (1.0 mm2)
797 ft (243 m) 1,267 ft (386 m) 2,015 ft (614 m)
Note: Video is limited to 500 feet on RG59/U coax cable without equalization amplifier.
GENERAL Construction Cover Chassis Panel Unit Weight Shipping Weight
Steel, black polyester powder coat Steel, zinc plated Aluminum, black polyester powder coat with white silkscreen 3 lb (1.35 kg) 5 lb (2.25 kg)
Pelco, Inc. Worldwide Headquarters: 3500 Pelco Way, Clovis, California 93612-5699 USA USA & Canada Tel: (800) 289-9100 • FAX (800) 289-9150 International Tel: +1 (559) 292-1981 • FAX +1 (559) 348-1120 www.pelco.com
Pelco and the Pelco logo are registered trademarks of Pelco, Inc. Product specifications and availability subject to change without notice ©Copyright 2008, Pelco, Inc. All rights reserved.
