Perfect For Every Season 2014 Uk

Transcript

PERFECT FOR EVERY SEASON 2014 WINTER UK 2014 SPRING SUMMER AUTUMN Perfect for every season 2014 UK Table of Contents LOADERS Loaders and options........................4-37 200 series...................................................4 200 series options.......................................5 300 series...................................................6 300 series options.......................................7 400 series...................................................8 400 series options.....................................10 500 series.................................................14 500 series options.....................................16 525 LPG....................................................20 525 LPG options.......................................22 600 series.................................................26 600 series options.....................................28 700 series.................................................32 700 series options.....................................34 R series.....................................................38 R series options.........................................40 ATTACHMENTS Buckets, material handling...........44-56 General bucket.........................................44 Light material bucket................................45 4 in 1 bucket..............................................46 High tip bucket..........................................47 XL high tip bucket....................................48 Grapple bucket.........................................49 Levelling bucket.......................................50 Pallet fork.................................................51 Pallet fork with side shift..........................52 Forklift mast.............................................53 Skip bucket...............................................53 Jib boom...................................................54 Telescoping jib boom...............................55 Ball hitch on front....................................56 Property maintenance..................56-74 2 High pressure washer..............................56 Dozer blade 1400.....................................57 Dozer blade 2000.....................................58 Dozer blade 2500.....................................59 Snow plow................................................60 Snow blade..............................................61 Flipper bucket..........................................62 Snow blower............................................63 Rotary Broom 1500/2000.........................64 Collecting broom......................................65 Bucket broom...........................................66 Rotary broom / Snow broom....................67 Rotary broom with collector.....................67 Sand spreader, front mount.....................68 Centrifugal sand spreader........................69 Towable sand spreader.............................70 Vacuum brush...........................................71 Leguan 50 Access platform......................72 Tipping trailer...........................................73 Trailer/Timber trailer................................74 Groundcare..................................75-82 Lawn mower 1000...................................75 Lawn mower 1200...................................76 Lawn mower 1500...................................77 Collecting lawn mower 1200...................78 Collecting lawn mower 1500...................79 Flail mower...............................................80 Fingerbar mower with hydraulic boom...81 Edge trimmer...........................................82 Landscaping................................83-92 Rotary hoe................................................83 Stone burier..............................................84 Rotary harrow..........................................85 Leveller.................................................86 Ripper..................................................87 Screening bucket......................................88 Stump buster and Stump grinder..............89 Table of Contents Stone grab................................................90 Stone installation clamp............................91 Grabbing tool...........................................92 Digging and construction............93-103 Backhoe 170.............................................93 Backhoe 210.............................................94 Backhoe 260.............................................95 Mini digger................................................96 Trencher................................................97 Auger.................................................98 Hydraulic breaker.....................................99 Cutter crusher........................................100 Drum type concrete mixer.....................101 Concrete mixing bucket.........................101 Tarbox................................................102 Vibrating plate.........................................102 Asphalt grinder.......................................103 Farming....................................103-117 All-round grapple...................................103 Silage fork...............................................104 XL silage grab.........................................105 Feeding table cleaning blade..................106 Silage dispenser bucket...........................107 Feed mover screw..................................108 Silage block cutter..................................109 Carousel broom.....................................109 Bale fork.................................................110 Round bale grab.....................................111 Square bale grab.....................................112 Manure fork...........................................112 Straw blower bucket..............................113 Grain/flour dispenser bucket.................113 Push broom............................................114 Horse arena harrow...............................115 Big bag transporter.................................116 Stone collecting bucket...........................117 Power Packs..............................118-119 Generator..............................................118 Compressor.........................................118 Pressure washer.....................................119 Forestry.....................................120-127 Log grab.................................................120 Log grab, heavy duty..............................120 Tree shear...............................................121 Winch...............................................121 Log splitter.............................................122 Log cutter/splitter..................................123 Firewood machine.................................124 Wood chipper CH100............................124 Wood chipper.........................................125 Wood chipper CH150 heavy duty.........126 Timber trailer with loader crane.............127 OTHER PRODUCTS Options...................................128-131 Tilt adapter.............................................128 Attachment control switch pack............128 Adapter plate..........................................129 Screw pile adapter..................................129 Multi Connector System.........................130 Additional products.........................132 Aluminium loading ramps.......................132 Transport Trailers....................................132 Filter kits..........................................133 Wheels and tyres..............................134 Avant shop........................................136 3 200 series Model AVANT 218 AVANT 220 Engine make and type Kohler CV18S Kohler CV20S Fuel Unleaded petrol Unleaded petrol Engine output 13,4 kW (18 hp) 14,9 kW (20 hp) Cooling system Air Air Max. drive speed 0 - 10 km/h 0 - 10 km/h Max. pulling force 600 daN 620 daN Hydraulics • Drive • Auxiliary hydraulics Max. lift capacity Turning radius Seat belt Tyres Weight Product no: Price 4 Direct hydrostatic 4 wheel drive with 4 hydr. motors 23 l/min185 bar 29 l/min185 bar 350 kg 350 kg 2100 mm 2100 mm Standard Standard 20 x 8.00 - 10 grass or 21 x 8.00 - 10 tractor profile 590 kg 620 kg A21338 £8,950.00 A21140 £9,900.00 200 series options A49548 Anti slip valve £650.00 A48939 Auxiliary hydraulics outlet in the rear, single acting £430.00 A33162 Traffic Kit £750.00 • lights, indicators, beacon • can be registered road legal A46584 Wheel weight 14 kg (incl. 2 wheelnuts) £69.00 64388 Beacon £235.00 A33904 Tool tray £75.00 65435 Weather cover for 200 series £100.00 • Covers the loader’s interior, protects against rain, snow etc. • Integrated storage pouch, mounts on the safety frame 65477 Full weather cover 200 series • Protects the entire Avant loader • HD storage bag £165.00 5 300 series Malli AVANT 313S AVANT 320S Length 1680 mm 1950 mm 1950 mm Width 790 - 1050 mm 790 - 1050 mm 790 - 1050 mm Height 1200 mm 1250 mm 1250 mm Weight 530 kg 720 kg 720 kg 5x10 TR / 20x8-10 grass 23 x 8.50 - 12 TR 23 x 8.50 - 12 TR hydraulic hydraulic hydraulic 650 kp 770 kp 1000 kp Standard wheels Transmission, drive Pulling force Drive speed max. 0-5 km/h (single speed model) 0-4,5 / 0-9 km/h (double speed) Auxiliary hydraulics oil flow / pressure 28 l/min 175 bar (single speed model) 2 x 22,5 l/min 175 bar (double speed model) Hydraulic oil cooler Option Option Tipping load 350 kg 400 kg 400 kg Engine make and type Honda GX390 Kubota D722 Kubota D722 Engine output (ISO Gross) 10 kW (13 hp) 14 kW (20 hp) 14 kW (20 hp) Petrol Diesel Diesel A21059 £8,250.00 A21061 £10,500.00 A21062 £12,300.00 Fuel Product no: Price 6 AVANT 320S+ Standard 300 series options A2628 Telescopic boom £990.00 A33916 Work light kit, 2 front, 1 rear A34917 Work light kit, 2 and 1, LED £245.00 £505.00 A43428 Extra back weight, 36 kg A2952 Back weight with trailer coupling A410647 Block heater, Kubota diesel £115.00 £175.00 £215.00 A31438 Boom floating system A31377 Flow divider valve, 320S+ A43546 Hydr. oil cooler, 320S £360.00 £635.00 £600.00 64672 Exhaust purifier, 20 hp diesel £565.00 65435 Weather cover £100.00 • Covers the loader’s interior, protects against rain, snow etc. • Integrated storage pouch, mounts on the ROPS frame 63477 Full weather cover • Protects the entire Avant loader • HD storage bag £165.00 7 400 series Model AVANT 419 AVANT 420 Length 2305 mm 2195 mm Width (23x8.50-12 wheels) 1050 mm 1050 mm Height 1980 mm 1980 mm Weight 930 kg 980 - 1030 kg 23x8.50-12” grass/TR 23x8.50-12” grass/TR Hydrostatic Hydrostatic Standard wheels Transmission, drive Pulling force 700 kp 700 kp Drive speed max. 12 km/h 12 km/h 31 l/min 185 bar 31 l/min 185 bar Auxiliary hydraulics oil flow / pressure Hydraulic oil cooler Turning radius Max. lifting height (with telescopic boom) Tipping load Standard 880 / 1970 mm 880 / 1970 mm 2750 mm 2750 mm 500 kg 550 kg Engine make and type Kohler CV20S Kubota D722 Engine output (ISO Gross) 14 kW (20 hp) 14 kW (20 hp) Fuel Product no: Price 8 Standard petrol Diesel A21447 £13,200.00 A21358 £14,300.00 400 series characteristics Standard specification • Telescopic Boom • Multi connector system • Drive release valve • Hydraulic oil cooler • Official tested ROPS canopy • 2 front work lights • Hydrostatic 4WD • Standard tyres 23x8.50-12 Traction or Grass profile • Standard ‘Avant Green’ seat with seat belt • 20 l Fuel tank Avant 419 • 20hp 400-serie machine with petrol engine • Working efficiency similar to Avant 420 at a Lower price • Same Kohler 20hp engine as Avant 220 • Same hydraulic system as Avant 420 Avant 419 benefits against 220 • Handling force +200kg • Lifting height +1,4m • Driving speed +2km/h • Stronger push power • Improved spacious interior Strong and handy machine 9 400 series options 10 A2522 Suspension seat +hand rests £260.00 A47773 Boom floating £360.00 A34753 Anti slip valve Only with Drive release solenoid valve £650.00 A35479 6-way Joystick control - aux. Hydr control with buttons £625.00 A43428 Extra back weight, 36 kg A2952 Back weight with trailer coupling £115.00 £175.00 A33916 Work light kit: 2 front, 1 rear (halogen) A34917 Work light kit: 2 front, 1 rear (LED) £245.00 £505.00 A34636 Auxiliary hydraulics outlet in the rear, single acting A34632 Auxiliary hydraulics outlet in the rear, double acting A410739 Reversing beeper £425.00 £535.00 £155.00 400 series options A35662 Cover plates • Heavy duty (polycarbonate)  A34700 Attachment control switch pack £495.00 £450.00 • Optional extra with which electric functions of the attachment are controlled • Does not require the optional 8 function joystick on the loader. • Consists of the control switches, wiring and a 7-pole socket that mounts on the boom next to the auxiliary hydraulics quick couplers. The electric wire of the attachment is connected to this socket. A34624 Cab L £1 150.00 • Windscreen (equipped with wiper), right side window and rear window. A34614 Traffic Kit • lights, indicators, beacon • can be registered road legal £775.00 A48690 8-way trailer socket * only with traffic kit £220.00 A410647 Engine block heater £215.00 A35504 Extra aux. hydr. outlet front, 400 series £695.00 For customers who want to mount the tilt adapter (must be equipped with conventional type quick couplers) and a hydraulic attachment – like 4 in 1 bucket - on the machine at the same time. 11 400 series options A410226 Exhaust purifier (420) £550.00 A34148 Tilt adapter £815.00 • Max. tilt angle +/- 12,5° • If the tilt adpater is used together with a hydraulic attachment, the optional A35504 Two auxiliary hydraulics outlets in the front must be mounted on the loader (see page 124 for Details). A34002 Beacon £235.00 A410922 FOPS canopy on ROPS £200.00 65436 Weather cover for 400-700 series £105.00 • Covers the loader’s interior, protects against rain, snow etc. • Integrated storage pouch, mounts on the ROPS frame 65478 Full weather cover 419 -635 • Protects the entire Avant loader • HD storage bag 12 £180.00 Notes: 13 500 series Model AVANT 520 AVANT 528 Length 2430 mm 2550 mm Width (with 23x10.50-12 wheels) 1095 mm 1095 mm Height (with 23x10.50-12 wheels) 1980 mm 1980 mm 1050 + 170 kg 1150 + 170 kg 23x10.50-12”grass/TR 23x10.50-12”grass/TR hydrostatic hydrostatic Weight Standard wheels Transmission, drive Pulling force 700 kp 750 kp Drive speed max. 12 km/h 12 km/h 31 l/min 185 bar 36 l/min 200 bar Auxiliary hydraulics oil flow / pressure Hydraulic oil cooler Turning radius inside/outside Max. lifting height (with telescopic boom) Standard 995 / 2050 mm 995 / 2050 mm 2790 mm 2790 mm Tipping load 700 kg 800 kg Max. breakout force / 50 cm 1100 kg 1250 kg Engine make and type Kubota D722 Kubota D1105 Engine output (ISO Gross) 14 kW (20 hp) 21 kW (28 hp) Diesel Diesel A21282 £17,400.00 A21303 £19,100.00 Fuel Product no: Price 14 Standard 500 series characteristics Standard specification • Telescopic Boom • Self-levelling system • Multi connector system • Drive release valve • Hydraulic oil cooler • Official tested ROPS canopy with FOPS roof • 2 front work lights • Hydrostatic 4WD • Standard tyres 23x10.50-12 Traction or Grass profile • Suspended Heated ‘Avant Green’ Seat with seat belt & hand rests • Integrated back weight 170kg Avant 500 benefits to 400-serie machines • Stronger OMT wheel motors • More handling power • Self levelling system increasing lifting power by 25% • Wider angle on pivot point, tilting power +50% • LX-Cab with heater available • DLX-Cab available for 528 Exellent choice with robust and simple hydraulics 15 500 series options A34144 Boom floating £745.00 A34753 Anti slip valve (520) A34542 Anti slip valve (528) £635.00 £635.00 A35754 6-way Joystick control - aux. Hydr control with bottoms £745.00 A34956 Hydraulic quick attachment coupling plate £755.00 A33916 Work light kit: 2 front, 1 rear (halogen) on ROPS A34917 Work light kit: 2 front, 1 rear (LED) on ROPS A35732 Work light kit: 2 front, 1 rear (halogen) on cab LX A35731 Work light kit: 2 front, 1 rear (LED) on cab LX 16 £245.00 £505.00 £245.00 £505.00 A35884 Extra aux. hydr. outlet front £515.00 For customers who want to mount the tilt adapter (must be equipped with conventional type quick couplers) and a hydraulic attachment – like 4 in 1 bucket - on the machine at the same time. 500 series options A34700 Attachment control switch pack £450.00 • Optional extra with which electric functions of the attachment are controlled • Does not require the optional 8 function joystick on the loader. • Consists of the control switches, wiring and a 7-pole socket that mounts on the boom next to the auxiliary hydraulics quick couplers. The electric wire of the attachment is connected to this socket. A33995 Cab L £1,150.00 • Windscreen (equipped with wiper), right side window and rear window. A21517 Cab LX • Windscreen (equipped with wiper), right side window and rear window • Door and heater £3,360.00 A21444 Cab DLX, New model • fully enclosed cab with heater • traffic kit • work light kit • textile seat, radio and cab air filter £4,715.00 A413706 Heated Luxury upholstered fabric Air suspended Seat, with arm rest and seat belt -Fitted Only in DLX cabs £1,000.00 A49063 Rear side weight kit 180 kg (only 528) £515.00 A35882 Auxiliary hydraulics outlet in the rear, single acting A35881 Auxiliary hydraulics outlet in the rear, double acting A410739 Reversing beeper £425.00 £535.00 £155.00 17 500 series options A33912 Road traffic light kit, on ROPS frame A35352 Road traffic light kit, on cab LX • lights, indicators, beacon • can be registered road legal £775.00 £775.00 A48690 8-way trailer socket *) only with Traffic kit £220.00 A43428 Extra back weight, 36 kg A2952 Back weight with trailer coupling £115.00 £175.00 A49813 Cover plates HD, 520, machine with ROPS frame £495.00 A35666 Cover plates HD, 520, machine with cab LX/DLX £495.00 A33581 Cover plates, HD, 528, machine with ROPS frame £535.00 A35664 Cover plates, HD, 528, machine with ROPS & mudguards rear £535.00 A35670 Cover plates, HD, 528, machine with cab LX/DLX £535.00 A35669 Cover plates, HD, 528, machine with LX/DLX & mudguards rear £535.00 • Heavy duty (polycarbonate)  A35237 Mudguards rear, pair, 528 • only on 26x12.00-12 and 320/60-12 £155.00 A410647 Engine block heater (520) A410648 Engine block heater (528) £215.00 £215.00 A33658 Hydraulic lifting device in the rear • Includes double acting outlet • Not with 170 kg rear weight • on 528 only 18 £1,950.00 500 series options A35413 Attachment mounting plate in the rear • Only 528 • Rear bumper removed £285.00 A49627 Exhaust purifier, (528) A410226 Exhaust purifier, (520) £550.00 £550.00 A34148 Tilt adapter £815.00 • Max. tilt angle +/- 12,5° • If the tilt adpater is used together with a hydraulic attachment, the optional A35504 Two auxiliary hydraulics outlets in the front must be mounted on the loader (see page 124 for Details). A34002 Beacon £235.00 65436 Weather cover for 400-700 series £105.00 • Covers the loader’s interior, protects against rain, snow etc. • Integrated storage pouch, mounts on the ROPS frame 65478 Full weather cover 419 -635 • Protects the entire Avant loader • HD storage bag £180.00 19 AVANT 525 LPG Model AVANT 525 LPG Length 2430 mm Width (with 23x10.50-12 wheels) 1095 mm Height (with 23x10.50-12 wheels) Weight Standard wheels Transmission, drive 23x10.50-12”grass/TR hydrostatic Pulling force 900 kp Drive speed max. 10 km/h Auxiliary hydraulics oil flow / pressure Hydraulic oil cooler Turning radius inside/outside Max. lifting height (with telescopic boom) 36 l/min 185 bar Standard 995 / 2050 mm 2790 mm Tipping load 800 kg Max. breakout force / 50 cm 1100 kg Engine make and type Kubota DF752 Engine output (ISO Gross) 16 kW (23 hp) Fuel Product no: Price 20 1980 mm 1070 + 170 kg LPG A21605 £19,900.00 AVANT 525 LPG Standard specification • Strong OMT400 drive motors • Telescopic Boom • Self-levelling system • Multi connector system • Two pumps for aux hydraulics, max. 36L/min • 8-way Joy stick control • Electric choke for start • Hydraulic oil cooler • Official tested ROPS canopy with FOPS roof • 2 front work lights • Hydrostatic 4WD • Standard tyres 23x10.50-12 Traction or Grass profile • Suspended Heated ‘Avant Green’ Seat with seat belt & hand rests • Integrated back weight 170kg Avant 525LPG for non-ventilated areas • Powered with 23hp LPG engine • Designed specially for demolition and non-ventilated construction sites • Only low CO2-emissions • With normal use the LPG bottle last around 15 hours (18kg bottle) Excellent low emissions machine for demolition and non-ventilated sites 21 525 LPG options A34144 Boom floating £745.00 A34573 Anti slip valve Only with Drive release solenoid valve £635.00 A34956 Hydraulic quick attachment coupling plate £755.00 A35683 Cover plates HD, machine with ROPS frame £495.00 A35684 Cover plates HD, machine with cab LX/DLX £495.00 • Heavy duty (polycarbonate)  A33916 Work light kit: 2 front, 1 rear (halogen) on ROPS A34917 Work light kit: 2 front, 1 rear (LED) on ROPS A35732 Work light kit: 2 front, 1 rear (halogen) on cab LX A35731 Work light kit: 2 front, 1 rear (LED) on cab LX 22 £245.00 £505.00 £245.00 £505.00 A35492 Extra aux. hydr. outlet front £515.00 For customers who want to mount the tilt adapter (must be equipped with conventional type quick couplers) and a hydraulic attachment – like 4 in 1 bucket - on the machine at the same time. 525 LPG options A34700 Attachment control switch pack £450.00 • Optional extra with which electric functions of the attachment are controlled • Does not require the optional 8 function joystick on the loader. • Consists of the control switches, wiring and a 7-pole socket that mounts on the boom next to the auxiliary hydraulics quick couplers. The electric wire of the attachment is connected to this socket. A33995 Cab L £1,150.00 • Windscreen (equipped with wiper), right side window and rear window. A21517 Cab LX • Windscreen (equipped with wiper), right side window and rear window • Door and heater £3,360.00 A21444 Cab DLX, New model • fully enclosed cab with heater • traffic kit • work light kit • textile seat, radio and cab air filter £4,715.00 A413706 Heated Luxury upholstered fabric Air suspended Seat, with arm rest and seat belt -Fitted Only in DLX cabs £1,000.00 A34017 Auxiliary hydraulics outlet in the rear, single acting A33971 Auxiliary hydraulics outlet in the rear, double acting A410739 Reversing beeper £425.00 £535.00 £155.00 23 525 LPG options A43428 Extra back weight, 36 kg A2952 Back weight with trailer coupling A48690 8-way trailer socket *) only with Traffic kit £115.00 £175.00 £220.00 A33912 Road traffic light kit, on ROPS frame A35352 Road traffic light kit, on cab LX • lights, indicators, beacon • can be registered road legal £775.00 £775.00 A410647 Engine block heater £215.00 A34148 Tilt adapter £815.00 • Max. tilt angle +/- 12,5° • If the tilt adpater is used together with a hydraulic attachment, the optional A35492 Two auxiliary hydraulics outlets in the front must be mounted on the loader (see page 13 for Details). A34002 Beacon 24 £235.00 525 LPG options 65436 Weather cover for 400-700 series £105.00 • Covers the loader’s interior, protects against rain, snow etc. • Integrated storage pouch, mounts on the ROPS frame 65478 Full weather cover 419 -635 • Protects the entire Avant loader • HD storage bag £180.00 25 600 series Model AVANT 630 AVANT 635 AVANT 640 Length 2550 mm 2550 mm 2550 mm Width (standard wheels) 1290 mm 1290 mm 1290 mm Height 2070 mm 2070 mm 2090 mm 1420 kg 1450 kg 1490 kg Weight Standard wheels Transmission, drive Auxiliary hydraulics oil flow / pressure Hydraulic oil cooler Turning radius inside/outside hydrostatic hydrostatic hydrostatic 44 l/min 200 bar 66 l/min 200 bar 66 l/min 200 bar Standard Standard Standard 900 / 2470 mm 900 / 2470 mm 900 / 2470 mm 2820 mm 2820 mm 2820 mm Tipping load 1000 kg 1000 kg 1000 kg Max. breakout force / 50 cm 1250 kg 1250 kg 1250 kg Max. lifting height (with telescopic boom) Engine make and type Kubota D 1105 Kubota V1505 Kubota V1505 Engine output (ISO Gross) 21 kW (28 hp) 28 kW (37,5 hp) 28 kW (37,5 hp) Diesel Diesel Diesel A21216 £22,500.00 A21145 £24,600.00 A21581 £25,900.00 Fuel Product no: Price 26 26x12.00-12”Grass / TR 26x12.00-12”Grass / TR 26x12.00-12”Grass / TR 600 series characteristics Standard specification • Telescopic Boom • Self-levelling system • Multi connector system • 8-way Joy stick control • Fast ground speed, max 22km/h (640) • Drive release valve • High volume hydraulic oil cooler • Official tested ROPS canopy with FOPS roof • 2 front work lights • Hydrostatic 4WD • Standard tyres 26x12-12 Traction or Grass profile • Suspended Heated ‘Avant Green’ Seat with seat belt & hand rests • Integrated back weight 170kg Avant 600 benefits to 500-serie machines • Stronger and faster hydraulic system for professionals • 8-way joy stick control • More oil flow for attachments, double pump with 44L/min (630) / 66L/min (635, 640) • More handling power • LX-Cab with heater and DLX Cab available • AC for DLX-Cab available (635/640) • Bigger wheels as standard Excellent choice for demanding ground care, construction and maintenance works 27 600 series options A34015 Boom floating £745.00 A35506 Anti slip valve A35830 Smooth drive (640) £1,160.00 £495.00 A34956 Hydraulic quick attachment coupling plate £755.00 A43428 Extra back weight, 36 kg A2952 Back weight with trailer coupling A48690 8-way trailer socket *) only with Traffic kit £115.00 £175.00 £220.00 A33916 Work light kit: 2 front, 1 rear (halogen) on ROPS A34917 Work light kit: 2 front, 1 rear (LED) on ROPS £245.00 A35732 Work light kit: 2 front, 1 rear (halogen) on cab LX A35731 Work light kit: 2 front, 1 rear (LED) on cab LX 28 £505.00 £245.00 £505.00 A35462 Extra aux. hydr. outlet front £515.00 For customers who want to mount the tilt adapter (must be equipped with conventional type quick couplers) and a hydraulic attachment – like 4 in 1 bucket - on the machine at the same time. 600 series options A33995 Cab L £1,150.00 • Windscreen (equipped with wiper), right side window and rear window. A21517 Cab LX • Windscreen (equipped with wiper), right side window and rear window • Door and heater £3,360.00 A21444 Cab DLX £4,715.00 A21463 Cab DLX, AC (Unit position rear) 635 only £6,155.00 A21511 Cab DLX, AC (Unit position roof) 635 only £6,155.00 • Heater and noise isolating interior • Headlight+blinker+reflectors + beacon, set • Work light kit • fabric seat, radio and cab air filter A413706 Heated Luxury upholstered fabric £1,000.00 Air suspended Seat, with arm rest and seat belt -Fitted Only in DLX cabs A34700 Attachment control switch pack £450.00 • Optional extra with which electric functions of the attachment are controlled • Does not require the optional 8 function joystick on the loader. • Consists of the control switches, wiring and a 7-pole socket that mounts on the boom next to the auxiliary hydraulics quick couplers. The electric wire of the attachment is connected to this socket. A410648 Engine block heater £215.00 A49063 Rear side weight kit 180 kg £515.00 29 600 series options A34014 Auxiliary hydraulics outlet in the rear, single acting A47774 Auxiliary hydraulics outlet in the rear, double acting A410739 Reversing beeper A33912 Road traffic light kit, on ROPS frame A35352 Road traffic light kit, on cab LX • lights, indicators, beacon • can be registered road legal A48690 8-way trailer socket *) only with Traffic kit £425.00 £535.00 £155.00 £775.00 £775.00 £220.00 A33581 Cover plates, HD, machine with ROPS frame £535.00 A35664 Cover plates, HD, machine with ROPS & mudguards rear £535.00 A35670 Cover plates, HD, machine with cab LX/DLX £535.00 A35669 Cover plates, HD, machine with LX/DLX & mudguards rear £535.00 • Heavy duty (polycarbonate)  A35237 Mudguards rear, pair • only on 26x12.00-12 and 320/60-12 A33658 Hydraulic lifting device in the rear • Includes double acting outlet • Not with 170 kg rear weight 30 £155.00 £1 950.00 600 series options A35413 Attachment mounting plate in the rear • Rear bumper removed £285.00 A35513 Exhaust purifier £550.00 A34148 Tilt adapter £815.00 • Max. tilt angle +/- 12,5° • If the tilt adpater is used together with a hydraulic attachment, the optional A35504 Two auxiliary hydraulics outlets in the front must be mounted on the loader (see page 124 for Details). A34002 Beacon £235.00 65436 Weather cover for 400-700 series £105.00 • Covers the loader’s interior, protects against rain, snow etc. • Integrated storage pouch, mounts on the ROPS frame 65478 Full weather cover 419 -635 • Protects the entire Avant loader • HD storage bag £180.00 31 700 series Model AVANT 745 Length 3030 mm 3030 mm Width (26x12.00-12 wheels) 1350 mm 1350 mm Height 2060 mm 2100 mm Weight 1650 kg 1700 kg 320/60-12” HD Grass / TR 320/55-15” HD Grass / TR hydrostatic hydrostatic Standard wheels Transmission, drive Drive speed Auxiliary hydraulics oil flow / pressure Hydraulic oil cooler Turning radius inside/outside 15 km/h 25 km/h 70 l/min 240 bar 70 l/min 240 bar Standard Standard 1240 / 2780 mm 1240 / 2780 mm 3080 mm 3080 mm Max. lifting capacity (hydr.) 2100 kg 2100 kg Tipping load 1400 kg 1400 kg Max. breakout force / 50 cm 1400 kg 1400 kg Max. lifting height (with telescopic boom) Engine make and type Kubota V2403 Kubota V2403 Engine output (ISO Gross) 36 kW (49 hp) 36 kW (49 hp) Fuel Product no: Price 32 AVANT 750 Diesel Diesel A21330 £27,600.00 A21310 £29,900.00 700 series characteristics Standard specification • Telescopic Boom • Self-levelling system • Multi connector system • 8-way Joy stick control • Drive release valve • High volume hydraulic oil cooler • Official tested ROPS canopy with FOPS roof • 2 front work lights • Hydrostatic 4WD • 10-stud standard tyres 320/60-12 Traction (745) • 10-stud standard tyres 320/55-15 Traction (750) • Suspended Heated ‘Avant Green’ Seat with seat belt & hand rests • Integrated back weight 170kg • Fast travel speed 25km/h (750) Avant 700 benefits to 600-serie machines • Outstanding handling capacity, up to 1400kg pallets • Stronger boom construction • More oil flow for attachments, double pump with 70L/min • More lifting hight, up to 3080mm • AC for DLX-Cab available • Bigger wheels as standard • Faster travel speed Excellent compact machine with huge handling capacity 33 700 series options A34015 Boom floating A34542 Anti slip valve (745) A34529 Anti slip valve (750) Only with Drive release solenoid valve A35719 Smooth drive (750) £745.00 £635.00 £1,160.00 £495.00 A34956 Hydraulic quick attachment coupling plate £755.00 A43428 Extra back weight, 36 kg A2952 Back weight with trailer coupling A33916 Work light kit: 2 front, 1 rear (halogen) on ROPS A34917 Work light kit: 2 front, 1 rear (LED) on ROPS A35732 Work light kit: 2 front, 1 rear (halogen) on cab LX A35731 Work light kit: 2 front, 1 rear (LED) on cab LX 34 £115.00 £175.00 £245.00 £505.00 £245.00 £505.00 A35477 Extra aux. hydr. outlet front £515.00 For customers who want to mount the tilt adapter (must be equipped with conventional type quick couplers) and a hydraulic attachment – like 4 in 1 bucket - on the machine at the same time. 700 series options A33995 Cab L £1,150.00 • Windscreen (equipped with wiper), right side window and rear window. A21517 Cab LX • Windscreen (equipped with wiper), right side window and rear window • Door and heater £3,360.00 A21465 Cab DLX, New £4,715.00 A21464 Cab DLX, AC (Unit position rear) £6,155.00 A21510 Cab DLX, AC (Unit position roof) £6,155.00 • Heater and noise isolating interior • Headlight+blinker+reflectors + beacon, set • Work light kit • fabric seat, radio and cab air filter A413706 Heated Luxury upholstered fabric Air suspended Seat, with arm rest and seat belt -Fitted Only in DLX cabs £1,000.00 A34700 Attachment control switch pack £450.00 • Optional extra with which electric functions of the attachment are controlled • Does not require the optional 8 function joystick on the loader. • Consists of the control switches, wiring and a 7-pole socket that mounts on the boom next to the auxiliary hydraulics quick couplers. The electric wire of the attachment is connected to this socket. A410509 Engine block heater £215.00 35 700 series options A49063 Rear side weight kit 180 kg £515.00 A410489 Auxiliary hydraulics outlet in the rear, double acting A410739 Reversing beeper £535.00 A34235 Road traffic light kit, on ROPS frame A35355 Road traffic light kit, on cab LX • lights, indicators, beacon • can be registered road legal £775.00 £775.00 A48690 8-way trailer socket * only with traffic kit £220.00 £155.00 A35678 Cover plates, HD, machine with ROPS frame £625.00 A35681 Cover plates, HD, machine with ROPS & mudguards rear £625.00 A35677 Cover plates, HD, machine with cab LX/DLX £625.00 A35675 Cover plates, HD, machine with LX/DLX & mudguards rear £625.00 • Heavy duty (polycarbonate)  36 A35313 Mud guards, rear • incl assembly set £155.00 A410562 Exhaust purifier £550.00 700 series options A34148 Tilt adapter £815.00 • Max. tilt angle +/- 12,5° • If the tilt adpater is used together with a hydraulic attachment, the optional A35504 Two auxiliary hydraulics outlets in the front must be mounted on the loader (see page 124 for Details). A35412 Attachment mounting plate in the rear • Rear bumper removed £285.00 A34002 Beacon £235.00 65436 Weather cover for 400-700 series £105.00 • Covers the loader’s interior, protects against rain, snow etc. • Integrated storage pouch, mounts on the ROPS frame 65479 Full weather cover 700 series • Protects the entire Avant loader • HD storage bag £210.00 37 R series Model R28 R35 Length 2550 mm 2550 mm Width (with std tyres) 1100 mm 1280 mm Height 2110 mm 2140 mm Weight Std tyre size Drive transmission 1480 kg 26*12,00-12" Hydrostatic 4wd Hydrostatic 4wd Pushing power 950 kp 1100 kp Drive speed 12 km/h 14 km/h Auxiliary hydraulics 38 l/min 66 l/min Hydraulic oil cooler Standard Standard 995 / 2135 mm 898 / 2205 mm 2790 mm 2820 mm Tipping load 900 kg 1050 kg Max bucket break out force / 50 cm 1100 kg 1250 kg Turning radius inside/outside Lifting height (telescope fully out) Engine make and type Kubota D1105 Kubota V1505 Engine power 21 kW (28 hp) 28 kW (37,5 hp) Diesel Diesel Fuel Product number Price 38 1400 kg 23*10,50-12" A21601 A21602 £19,400.00 £24,900.00 R series characteristics Standard specification • Telescopic Boom • Self-levelling system • Multi connector system • Drive release valve • High volume hydraulic oil cooler • Official tested ROPS canopy with FOPS roof • 2 front work lights • Hydrostatic 4WD • Suspended Heated ‘Avant Green’ Seat with seat belt & hand rests • Integrated back weight 170kg The R series • Shorter machine – Avant R-series is normally approx. half a meter shorter than similar horse power competitor • Telescopic boom – Almost none of the competitors have a telescopic boom available • Better visibility – Driver sits a lot closer to the attachment and machine is a lot more compact, allowing for a better visibility • Better stability – Rigid articulation joint as on regular Avant design as well. • Lighter machine – Easier to transport Strong and versatile machine with rear driver position 39 R series options A34144 Boom floating (R28) A34015 Boom floating (R35) £745.00 £745.00 A34573 Anti slip valve (R28) A34542 Anti slip valve (R35) only with Drive release solenoid valve £635.00 £635.00 A34956 Hydraulic quick attachment coupling plate £755.00 A43428 Extra back weight, 36 kg A2952 Back weight with trailer coupling £115.00 £175.00 A33916 Work light kit: 2 front, 1 rear (halogen) on ROPS A34917 Work light kit: 2 front, 1 rear (LED) on ROPS £245.00 £505.00 A35462 Extra aux. hydr. outlet front £515.00 For customers who want to mount the tilt adapter (must be equipped with conventional type quick couplers) and a hydraulic attachment – like 4 in 1 bucket - on the machine at the same time. 40 R series options A34700 Attachment control switch pack £450.00 • Optional extra with which electric functions of the attachment are controlled • Does not require the optional 8 function joystick on the loader. • Consists of the control switches, wiring and a 7-pole socket that mounts on the boom next to the auxiliary hydraulics quick couplers. The electric wire of the attachment is connected to this socket. A410648 Engine block heater £215.00 A49063 Rear side weight kit 180 kg £515.00 A35882 Auxiliary hydraulics outlet in the rear, single acting (R28) A34014 Auxiliary hydraulics outlet in the rear, single acting (R35) A35881 Auxiliary hydraulics outlet in the rear, double acting (R28) A47774 Auxiliary hydraulics outlet in the rear, double acting (R35) A410739 Reversing beeper £425.00 A33912 Road traffic light kit, on ROPS frame • lights, indicators, beacon • can be registered road legal £775.00 A48690 8-way trailer socket *) only with Traffic kit £220.00 £425.00 £535.00 £535.00 £155.00 41 R series options A49627 Exhaust purifier (R28) A35513 Exhaust purifier (R35) £550.00 £550.00 A34148 Tilt adapter £815.00 • Max. tilt angle +/- 12,5° • If the tilt adpater is used together with a hydraulic attachment, the optional A35504 Two auxiliary hydraulics outlets in the front must be mounted on the loader (see page 124 for Details). A34002 Beacon 42 £235.00 Notes: 43 Buckets, material handling General bucket • All round bucket, suitable for almost every shovelling job • Excellent visibility to the edge of the bucket • High breakout force Avant general buckets are designed so that the operator can see the front edge of the bucket from the driver’s seat, which means quick and easy loading and emptying. Length of the bucket has been optimized in order to give best possible breakout force. There is a grill at the upper end of the bucket which prevents stones from falling towards the operator. Available with straight edge – on special request also with teeth. 200 series Width 960 mm Volume 130 l Weight Product no 57 kg A33032 Price £325.00 300, 400, 500, R, 600 and 700 series Width 218 44 220 313S 320S 320S+ 419 420 Very compatible 520 Volume Weight Product no Price 890 mm 180 l 57 kg A21044 £365.00 1050 mm 210 l 65 kg A1315 £385.00 1100 mm 215 l 68 kg A21312 £445.00 1280 mm 260 l 75 kg A21043 £460.00 1400 mm 285 l 90 kg A21168 £500.00 1650 mm 345 l 100 kg A34341 £525.00 525LPG 528 Compatible R28 R35 630 635 Incompatible 640 745 750 Buckets, material handling Light material bucket • Fast and easy moving of light materials • Excellent visibility to the edge of the bucket • High back of the bucket prevents material from falling over the rear edge and guarantees high volume Light material buckets are intended for handling of e.g. snow, saw dust, manure, wood chips and other light materials. The bottom of a light material bucket is considerably longer and the sides are higher than on a general bucket, which speeds up the work a lot. 200 series Width Volume Weight Product no Price 1050 mm 210 l 65 kg A33028 £425.00 1280 mm 260 l 75 kg A33100 £470.00 300, 400, 500, R, 600 and 700 series Width 218 220 313S 320S 320S+ 419 420 Very compatible 520 Volume Weight Product no Price 1050 mm 400 l 95 kg A32755 £490.00 1100 mm 420 l 99 kg A33993 £595.00 1280 mm 485 l 105 kg A32753 £635.00 1600 mm 610 l 125 kg A32744 £715.00 1800 mm 685 l 137 kg A33530 £805.00 525LPG 528 Compatible R28 R35 630 635 Incompatible 640 745 750 45 Buckets, material handling 4 in 1 bucket Efficient multi purpose bucket - can be used as a normal bucket as well as a dozer blade, leveler or a grab. The front part of the bucket opens with 2 hydraulic cylinders, located on the back side of the bucket, which enables dozing, levelling and picking of stones, tree stumps etc. Another benefit of the opening bottom is that the bucket can be emptied at a higher level by opening the bottom instead of tipping the bucket edge down. Available with straight edge or with teeth. • All round tool for landscaping and groundcare • A versatile bucket suitable for many different jobs at different stages on the work site 300, 400, 500, R, 600 and 700 series Edge 218 46 220 313S 320S 320S+ 419 420 Very compatible 520 Width Volume Weight Product no Price straight 1100 mm 155 l 152 kg A21245 £1,450.00 straight 1280 mm 170 l 175 kg A21156 £1,585.00 straight 1400 mm 210 l 192 kg A21266 £1,765.00 teeth 1100 mm 155 l 162 kg A21249 £1,730.00 teeth 1280 mm 170 l 185 kg A21184 £1,785.00 teeth 1400 mm 210 l 202 kg A21269 £1,990.00 R35 630 525LPG 528 Compatible R28 635 Incompatible 640 745 750 Buckets, material handling High tip bucket High tip bucket is the right choice when you need to reach higher and longer. The bucket is equipped with a hydraulic cylinder that pushes and tips the bucket over its front edge, which gives considerably more tipping height than with a normal bucket. Max. tipping height with telescopic boom on 300 series is 2710 mm, on 500 and 600 series 3150 mm and on 700 series as high as 3500 mm. • High tipping height • More volume than on general bucket – excellent for loose and light material loading 200 series Width Volume Weight 1050 mm 160 l Product no 120 kg A21092 Price £835.00 300, 400, 500, R, 600 and 700 series Volume Weight Product no 1050 mm 150 l 120 kg A2631 £850.00 1280 mm 350 l 160 kg A2824 £915.00 Width 218 220 313S 320S 320S+ 419 420 Very compatible 520 525LPG 528 Compatible R28 R35 630 635 Incompatible 640 Price 745 750 47 Buckets, material handling XL high tip bucket • Large volume bucket for efficient loading of light materials • Tipping height as high as 3,5 m The XL high tip bucket has more loading volume - very useful when loading light materials. The bucket is an ideal tool for snow removal, loading of wood chips and for loading works on recycling plants etc. Tipping of the bucket happens with two hydraulic cylinders – this means emptying is easy also with full load in the bucket. 500, R, 600 and 700 series Width 1800 mm 218 48 220 313S 320S 320S+ 419 420 Very compatible 520 525LPG 528 Compatible Volume Weight Product no 900 l 320 kg A21273 R28 R35 630 635 Incompatible 640 Price £2,295.00 745 750 Buckets, material handling Grapple bucket Grapple bucket combines a normal bucket and a grapple and is therefore suitable for a multitude of jobs. It can be used for transporting and loading of branches, wood chips, compost, straw, manure, construction waste etc. It can also be used as a normal bucket with the grapple in the upright position. • Versatile bucket for handling of loose materials 300, 400, 500, R, 600 and 700 series 218 220 313S 320S 320S+ 419 420 Very compatible 520 525LPG Width Weight Product no 900 mm 130 kg A32484 Price £915.00 1050 mm 145 kg A32448 £965.00 1300 mm 165 kg A33639 £1,195.00 R35 635 745 528 Compatible R28 630 Incompatible 640 750 49 Buckets, material handling Levelling bucket • Excellent visibility to tip of bucket • Sharp back edge enables exact levelling when driving backward • Heavy duty design Avant levelling buckets are built with heavy duty construction in mind. The sharp back edge of the bucket makes levelling easy when driving backward. Other features include a longer bottom, which enables the driver to see the tip of the bucket perfectly. This also makes levelling easier. 500, R, 600 and 700 series Volume Weight Product no 1280 mm 220 l 170 kg A21504 £675.00 1400 mm 240 l 180 kg A21505 £765.00 Width 218 50 220 313S 320S 320S+ 419 420 Very compatible 520 525LPG 528 Compatible R28 R35 630 635 Incompatible 640 Price 745 750 Buckets, material handling Pallet fork • Excellent field of vision both to the attachment and to the environment makes working with pallet forks precise and easy • Pallet fork is a useful attachment on construction sites, farms, as well as on the company’s yard doing material handling jobs Avant pallet fork is the right attachment for lifting and handling of different types of materials on pallets. Fork width can easily be adjusted thanks to the quick lock mechanism. The forks are made of high tensile forged steel and designed in accordance with the ISO2330 standard. Avant is an excellent machine for load handling thanks to the precise steering and drive control. Compared with a conventional forklift truck Avant is superior when working outdoors and on terrains, be it winter or summer. 200 series Fork length Weight Product no 850 mm 90 kg A33029 Price £450.00 300, 400, 500, R, 600 and 700 series Model Fork length Weight Product no Price Regular 850 mm 90 kg A21047 £450.00 Long 1100 mm 105 kg A21039 £595.00 Option: Foldable back frame A21512, £395.00 218 220 313S 320S 320S+ 419 420 Very compatible 520 525LPG 528 Compatible R28 R35 630 635 Incompatible 640 745 750 51 Buckets, material handling Pallet fork with side shift • Hydraulic side shift and fork width adjustment • Foldable back frame as standard Hydraulic fork adjustment on the pallet fork makes it possible to move the forks further apart or closer to each other easily and comfortably from the driver’s seat. The forks can also be moved to the left or to the right, making it possible to shift the load to the side of the machine - closer to a wall for example. All functions can be operated from the driver’s seat. Pallet fork is equipped as standard with a foldable back frame which enables handling of larger loads and protects the driver from falling objects. 500, R, 600 and 700 series Fork length Weight Product no 1100 mm 173 kg A21474 Price £1,995.00 The optional attachment control switch pack A34700 is recommended on the loader. 218 52 220 313S 320S 320S+ 419 420 Very compatible 520 525LPG 528 Compatible R28 R35 630 635 Incompatible 640 745 750 Forklift mast gives more lift capacity and stability with large loads. The forklift mast is an ideal attachment for handling and lifting of heavy pallets (stone, fertilizer), big bags and other heavy materials. It can be also used for loading and unloading of trucks. The mast is equipped with big foam filled tyres which give good all terrain transporting capabilities. Thanks to the quick attach system connecting to and from the Avant is fast and easy. • For lifting and handling of heavier loads • Ideal for paving jobs – handling of pallets with paving stones 400, 500 and 600 series Lift height 1750 mm Max. lift capacity 1500 kg Fork length 1100 mm Tyre size 18 x 7.50 - 8 Weight 300 kg Product no A32915 Price 218 220 313S 320S 320S+ 419 420 520 Very compatible 525LPG 528 Buckets, material handling Forklift mast £3,775.00 R28 R35 Compatible 630 635 640 745 750 Incompatible Skip bucket • Replace the waste bins on the site with the skip bucket – loading, transporting and emptying of the bucket is very easy with Avant Avant skip bucket is a very useful attachment for waste collecting, transporting, storaging and emptying. The bucket tilts down so that one can load with it from ground level, and thanks to the sharp front edge filling is easy and efficient. The bucket has two support legs so that it can be left standing in place while you are doing other work with the machine. 300, 400, 500, R, 600 and 700 series Width 218 220 313S 320S 320S+ 419 420 Very compatible 520 525LPG Volume Weight Product no 950 mm 360 l 120 kg A2838 £755.00 1390 mm 700 l 160 kg A21126 £1,025.00 528 Compatible R28 R35 630 635 Incompatible 640 Price 745 750 53 Buckets, material handling Jib boom Avant jib boom is a simple and ingenious attachment: lifting and moving heavier loads in tight situations are not a problem any more when you have this jib boom on your Avant. The maximum lifting height is 4 meters (height of the lifting hook). • Economical attachment, suitable for many different lifting jobs • Connecting points on the boom increase lifting safety 300, 400, 500, R, 600 and 700 series 218 54 220 313S 320S 320S+ 419 420 Very compatible 520 Lift hooks Length Weight Product no 2 pcs 1200 mm 30 kg A32395 525LPG 528 Compatible R28 R35 630 635 Incompatible 640 Price £345.00 745 750 Buckets, material handling Telescoping jib boom • Excellent outreach, as much as 3,05 m from the front wheels • Max. lift height with 700 series as high as 4,75 m • Versatile lifting attachment for various load handling jobs 500, R, 600 and 700 series The hydraulically telescoping jib boom is a very efficient and versatile tool in all lifting jobs on the work site. The steplessly extending and retracting boom allows lifting to places that would otherwise be very hard to reach. Compact design with telescoping cylinder inside the boom makes work safe and easy. The jib boom is equipped with a rotating lifting hook and durable wear pads on the outer boom. Max. boom length 1900 mm Min. boom length 1300 mm Lifting height* 4,7 m Max load Avant 700 ser* 400 kg Max load Avant 600 ser* 300 kg Max load Avant 500 ser* 250 kg Max. outreach* 3,05 m Weight 110 kg Product no A21342 Price £1,250.00 *) Both the telescopic boom of the loader and the jib boom extended to max. outreach. 218 220 313S 320S 320S+ 419 420 Very compatible 520 525LPG 528 Compatible R28 R35 630 635 Incompatible 640 745 750 55 Ball hitch on front Buckets, material handling An easier way to move trailers, trailer mounted work platforms, boats on trailer etc. on yards. Thanks to the perfect vision to the ball hitch it is very easy to couple a trailer by just driving the ball under the trailer and locking it in the coupling by lifting the boom of the loader. Equipped with both a 50 mm ball hitch and a towing pin for lunette ring type trailer couplings. 300, 400, 500, R, 600 and 700 series 218 220 313S 320S 320S+ 419 420 520 Very compatible 525LPG 528 Weight Product no Price 34 kg A35592 £225.00 R28 R35 Compatible 630 635 640 745 750 Incompatible High pressure washer • Efficient high pressure washer, destined for street cleaning - is also equipped with a hand held washing gun Property maintenance This efficient hydraulic washer is fitted with a 270 l water tank. Max. water pressure is 200 bar, water use is adjustable. Equipped with an adjustable 8 nozzle bar for street washing. A hand held washing gun with 20 m hose roll is standard equipment as well. The pressure washer makes your Avant a moving washing unit – you can wash your loader, equipment, car etc. easily and efficiently. 400, 500, R, 600 and 700 series Max. water pressure 200 bar Water consumption 5-30 l/min Water container volume 270 l Nozzles 8 pcs Product no A21009 Price 218 56 220 313S 320S 320S+ 419 420 Very compatible 520 525LPG 528 Compatible R28 £4,350.00 R35 630 635 Incompatible 640 745 750 Property maintenance Dozer blade 1400 • Economical dozer blade, well suited for snow removal • Spring release mechanism for improved safety Equipped with hydraulic blade turning, Avant dozer blade is the ideal tool for snow removal, earthmoving and similar jobs where the materials must be dozed away quickly. The blade is equipped with spring release mechanism which protects the blade and driver in case it hits an obstacle. Rubber blade and ice cutting blade available as an option. 200 series Blade width 1400 mm Slewing angle ±30 deg Weight 100 kg Blade height 380 mm Product no A21093 Price £985.00 300, 400, 500, R, 600 and 700 series Blade width 1400 mm Slewing angle ±30 deg Weight Options: Extensions 2 x 180 mm (can be mounted straight or in collecting position) A48869 £275.00, Ice cutting blade A32315 £190.00, Rubber blade A32383 £100.00 218 220 313S 320S 320S+ 419 420 Very compatible 520 525LPG 100 kg Blade height 380 mm Product no A2867 Price 528 Compatible R28 £985.00 R35 630 635 Incompatible 640 745 750 57 Property maintenance Dozer blade 2000 • Two solid skid shoes which reduce blade wear and improve maneuverability • Robust construction and higher blade than on 1400 mm dozer blade for more efficient dozing • Versatile dozer blade, efficient on larger areas but still compact enough for tight situations as well • Turnable 2 x 250 mm extensions as standard, can be mounted in collection position or straight • Equipped with a turnable blade with straight / ice cutting edge Equipped with hydraulic blade turning, Avant dozer blade is the ideal tool for snow removal, earthmoving and similar jobs where the materials must be dozed away quickly. The blade is equipped with spring release mechanism which protects the blade and driver in case it hits an obstacle. Dozer blade 2000 is equipped with a higher blade than the 1400 mm dozer blade which means that you can move bigger amounts of snow, gravel etc. with it. Dozer blade 2000 is equipped with two bolt-on extensions, 250 mm each which can be mounted as collecting or straight edge. Equipped with a turnable blade with straight and ice cutting edge. Skid shoes are standard equipment as well - they guarantee smooth dozing also on uneven surfaces. 300, 400, 500, R, 600 and 700 series Blade width 2000 mm Slewing angle ±30 deg Weight 58 220 313S 320S 320S+ 419 420 Very compatible 520 Blade height 500 mm Product no A2944 Price Options: Rubber blade 2000 mm A33833 £275.00 218 165 kg 525LPG 528 Compatible R28 £1,455.00 R35 630 635 Incompatible 640 745 750 Property maintenance • Two solid skid shoes which reduce blade wear and improve maneuverability • Robust construction and higher blade than on 2000 mm dozer blade, with spring release mechanism designed for professional use • Recommended for professional snow removal on larger areas • Turnable 2 x 250 mm extensions as standard, can be mounted in collection position or straight • Equipped with a turnable blade with straight / ice cutting edge 400, 500, R, 600 and 700 series Dozer blade 2500 Equipped with hydraulic blade turning, Avant dozer blade is the ideal tool for snow removal, earthmoving and similar jobs where the materials must be dozed away quickly. The blade is equipped with spring release mechanism which protects the blade and driver in case it hits an obstacle. Dozer blade 2500 is ideally designed for clearing snow from large areas, such as large industrial estates, parking lots etc. Dozer blade 2500 is equipped with two bolt-on extensions, 250 mm each which can be mounted as collecting or straight edge. Equipped with a turnable blade with straight and ice cutting edge. Skid shoes are standard equipment as well - they guarantee smooth dozing also on uneven surfaces. Blade width 2500 mm Slewing angle ±30 deg Weight Options: Rubber blade 2500 mm A35624 £295.00 218 220 313S 320S 320S+ 419 420 Very compatible 520 525LPG 528 Compatible 260 kg Blade height 520 mm Product no A410365 Price £1,995.00 R28 R35 630 635 Incompatible 640 745 750 59 Property maintenance Snow plow • Versatile snow removal tool for professional use Avant snow plow is a versatile attachment for snow removal. It consists of two independently hydraulically adjustable blades. Both blades have a spring release mechanism in the lower part of the blade to prevent any sudden stops caused by frozen objects, well lids etc. The float mechanism on the mounting bracket guarantees that the blade follows ground as well as possible. Angle of both blades can be adjusted independently with a toggle switch from the driver’s seat. 400, 500, R, 600 and 700 series Model 1800 mm 2200 mm Blade width 1500-1800 mm 1800-2200 mm Blowing angle ±35 deg ±35 deg Weight Blade height Product no Price 60 220 313S 320S 320S+ 419 420 Very compatible 305 kg 770 mm A21048 A34368 £3,990.00 £4,340.00 Requires attachment control switch pack A34700 on the loader Options: Support legs with skid shoes A417068 £565.00 218 280 kg 770 mm 520 525LPG 528 Compatible R28 R35 630 635 Incompatible 640 745 750 Property maintenance Snow blade Avant snow blade is designed for fast snow clearing in large areas. The snow blade is especially good in clearing road areas from snow, because the snow is thrown further away in a single pass. The form of the snow blade is designed so that snow picks up against the back wall of the snow blade creating a twirl on the snow. When the snow is in motion it moves easier to the side of the snow blade creating less force that moves the machine sideways and the snow is also thrown further away. The plastic middle part makes the blade light and allows snow to glide easier to the side of the blade, which also helps to throw the snow further away. • Fast way to clear snow from large areas and roads • Throws snow further away in a single pass than a regular dozer blade • Creates less sideways force, so the front of the loader will not move so easily to the side. R, 600 and 700 series Blade width 2200 mm Wing width 2500 mm Turning angle ±30° Weight 375 kg Product no A21493 Price £2,990.00 Options: Rubber blade A21497 £285.00 218 220 313S 320S 320S+ 419 420 Very compatible 520 525LPG 528 Compatible R28 R35 630 635 Incompatible 640 745 750 61 Property maintenance Flipper bucket • Large volume bucket, 730 l • Independently controllable side wings • Max. working width over 3 m Flipper bucket is designed for clearing snow in large areas or in areas where snow must be moved long distances. Thanks to the independently controllable side wings the bucket is exteremely versatile in snow clearing and can be operated in smaller areas as well without problems. With the flipper bucket you can move a very large quantity of snow in one push. Because the wings fold out slightly forward from the sides, you can push 2-3 times the capacity of the bucket between the wings. Both wings can be operated independently. This makes the bucket easy to control also in narrow or tight areas. R, 600 and 700 series Volume 730 l Width 1800 - 3010 mm Weight 325 kg Product no A414035 Price £3,990.00 The optional attachment control switch pack A34700 is recommended on the loader. 218 62 220 313S 320S 320S+ 419 420 Very compatible 520 525LPG 528 Compatible R28 R35 630 635 Incompatible 640 745 750 ew ed Property maintenance Re n Snow blower Avant snow blower is an efficient attachment for snow removal from sidewalks, foot paths, road and similar places where the snow must be spread out evenly. The two-stage design of the Avant heavy duty snow blower makes it a very efficient snow removal tool - also with wet and heavy snow. First the auger breaks up the snow and moves it into the fan which then throws the snow out through the discharge chute. Discharge chute can be rotated 270°, operated from the driver’s seat. Throwing height can be adjusted manually; electric throwing height adjustment available as an option. Hard snow cutters are available as an option, bolted on each end of the blower. They facilitate cutting of hard packed snow and increase working width a bit also. • Renewed snow blowers with 30 % better work effiency thanks to new design and updated hydraulics • Efficient two-stage snow blowers, also for professional use • Two working widths, suitable for all articulated model series Avant 220 218 220 313S 320S 320S+ 419 420 520 525LPG 1100 mm Working width 1100 mm Chute rotation 270 ° Weight 225 kg Product no A35940 Price £3,100.00 400, 500, R, 600 and 700 series Model Options: Hard snow cutters A35925, £75.00 Electric throwing height adjustment A34845, £450.00 The optional attachment control switch pack A34700 is recommended on the loader. If the snow blower is equipped with the electric throwing height adjustment, A34700 must be mounted. Model Model 1100 1400 Working width 1100 mm 1400 mm Chute rotation 270 ° 270 ° Weight 225 kg 255 kg Product no A35870 A35847 £3,400.00 £4,160.00 Price 528 R28 R35 630 635 640 745 750 1100 1400 Very compatible Compatible Incompatible 63 Property maintenance Rotary Broom 1500/2000 A totally new rotary broom series that is easier to use and more refined than earlier broom models. Two working widths available, 1500 and 2000 mm. The broom is equipped as standard with turning which is powered by electric actuator motor. This means turning of the broom is easily and comfortably operated with a switch from the driver’s seat. The floating mechanism is completely new, and now instead of wheels the brush is resting on its bristles and the whole brush axle is floating freely. This guarantees a noise free float for the brush and a lot of movement space, making sweeping easier. The broom is equipped with supports which can be extended when the broom is not in use, so that the broom rests on the supports and the nylon brush doesn’t get damaged during storage. 400, 500, R, 600 and 700 series Model 1500 2000 Broom width 1500 mm 2000 mm Total width 1770 mm 2270 mm Boom diameter 550 mm 550 mm Turning Electric actuator motor as standard Turning angle +/- 25 deg +/- 25 deg Weight 200 kg 260 kg Product no A35284 A35583 £3,295.00 £3,525.00 Price The optional attachment control switch pack A34700 is recommended on the loader. Model 218 220 313S 320S 320S+ 419 420 520 525LPG 528 R28 R35 630 635 1500 2000 64 Very compatible Compatible Incompatible 640 745 750 Property maintenance New Collecting broom 500, R, 600 and 700 series Model A totally new collecting brush for professional property management customers, cities and municipalities. The new brush has a heavy duty construction, floating brush axle, automatic brush wear compensation and a specially designed water spraying system for dust binding. The new construction is also well enclosed all around the main brush. This offers a better collection result, especially when turning. Another benefit from the enclosed construction is less dust formation. 1500 Broom width 1500 mm Total width 1800 mm Boom diameter 550 mm Box emptying Hydraulic (with two cylinders) Box volume 200 litres Water tank volume 150 litres Weight without side brush Weight with 1 side brush 450 kg Weight with 2 side brush 475 kg Product no Option: Side brush A35698, £925.00 Water spraying system A35642, £995.00 218 220 313S 320S 320S+ 419 425 kg (without water spraying system) Side brush water spraying system Price A35602 no no £5,250.00 A35918 1 brush no £6,175.00 A35919 1 brush yes £7,170.00 The optional attachment control switch pack A34700 is recommended on the loader. 420 Very compatible 520 525LPG 528 Compatible R28 R35 630 635 Incompatible 640 745 750 65 New Property maintenance Bucket broom Completely new bucket broom which collects the waste in a large bucket shaped box. The broom gives best sweeping result when reversing, but it also works when driving forward. Forward sweeping is especially recommended when the waste is larger in dimensions, for instance construction waste, beverage cups, tree leaves etc. The bucket broom is equipped with a floating mechanism which allows the bucket lip to rest against ground freely. This means that the loader must not necessarily be equipped with boom floating when working with the bucket broom. Emptying of the collector happens by first lifting the broom up hydraulically, after that the collector box can be emptied by tilting it down like a normal bucket. Brush axle is equipped with a simple quick locking system for adjusting the sweeping height. Water spraying system for dust binding is also available. It minimizes dust build up when brushing dry waste. • Excellent sweeping result when driving backwards • Suitable for collecting larger waste as well • Large bucket shaped collecor box • Quick, hydraulic emptying 300, 400, 500, R, 600 and 700 series Model 218 220 313S 320S 320S+ 419 420 520 1500 Broom width 1100 mm 1500 mm Total width 1356 mm 1764 mm Box volume Boom diameter Water tank volume Product no Price Product no. with water spraying system Price with water spraying system Option: A35956 Water spraying system for Bucket broom 1100, £965.00 A35807 Water spraying system for Bucket broom 1500, £995.00 Model 1100 525LPG 528 R28 R35 630 370 l 500 l 500 mm 500 mm 120 l 120 l A35945 A35689 £2,965.00 £3,895.00 A36023 A36024 £3,930.00 £4,890.00 635 745 1100 1500 66 Very compatible Compatible Incompatible 640 750 Rotary broom / Snow broom • Rotary broom equipped with mechanic and Snow broom equipped with hydraulic sweeping angle adjustment 200 series Model Option: Water spraying system, powered by electric motor, with 80 l water tank A2882 Avant snow broom is designed for snow sweeping especially on uneven surfaces such as stone and brick paved areas. The broom can also be equipped with an additional support wheel (option) and used for street sweeping etc. Rotary broom Snow broom Broom width 1050 mm 1050 mm 550 mm Boom diameter 500 mm Broom material Nylon Nylon Weight 130 kg 130 kg Product no / price mechanical slewing A33261 £1,925.00 - Product no / price hydraulic slewing A33539 £2,595.00 A21123 £2,995.00 Property maintenance Avant rotary brooms are excellent tools for sweeping material away, when collecting of the waste is not necessary. The strong broom sweeps the ground clean in one pass, even a thicker layer of sand. Sweeping angle can be adjusted manually or hydraulically (option). Option: extra support wheel for non-snow conditions A48427, £95.00 218 220 313S 320S 320S+ 419 420 520 Very compatible 525LPG 528 R28 R35 630 Compatible 635 640 745 750 Incompatible Broom with collector box • Powerful sweeper for larger areas • Front mounted brush rotates Avant brooms with collector box are specially made for larger yards and street cleaning. Three big support wheels guarantee smooth and easy operation. Collector box emptying is hydraulic – operation with auxiliary hydraulics control lever. • Thanks to he unique collecting outwards and throws the material up and over backwards to the collector box which is closer to the machine – better balance with full collector box method the box fills up completely • Hydraulic emptying of collector box a standard feature • Nylon brush as standard, consists of segments than can be replaced one by one 200 series Broom width 1050 mm Boom diameter 500 mm Broom material Nylon Collector box volume 170 l Product no A33263 Price 218 220 313S 320S 320S+ 419 420 Very compatible 520 525LPG 528 Compatible R28 £2,725.00 R35 630 635 Incompatible 640 745 750 67 Property maintenance Sand/salt spreader The hydraulic sand / salt spreaders are designed for fast and efficient spreading. Front mounting allows loading from ground level in the same way as with normal bucket. Powered by hydraulic motor and equipped with a mixer axle which breaks any frozen sand and prevents the sand from clogging up. The plates in the feeding roll are spring loaded so that stones will not block or break the spreader. • Filling can be done also by loading with the spreader like with a normal bucket • Robust design, well suited for professional use 200 series Spreading width 1000 mm Volume 160 l Weight 135 kg Operation Hydraulic Product no A21114 Price £1,565.00 300, 400, 500, R, 600 and 700 series Model Spreading width Volume Weight Operation Product no Price Model 218 220 313S 320S 320S+ 419 420 520 525LPG 528 R28 R35 630 900 1500 900 mm 1500 mm 200 l 500 l 170 kg 270 kg Hydraulic Hydraulic A2947 A411401 £982.00 £1,406.00 635 900 1000 1500 68 Very compatible Compatible Incompatible 640 745 750 Property maintenance Centrifugal sand / salt spreader Centrifugal sand or salt spreader is the right choice for winter maintenance of large areas. Spreading area can be adjusted from 2 to 6 meters which guarantees fast and efficient spreading. The spreading amount can be adjusted quickly and easily from the side of the attachment. • Fast spreading on large areas 400, 500, R, 600 and 700 series Spreading width 0,8-6 m Volume 250 l Max. load 500 kg Weight 130 kg Product no A21183 Price £3,850.00 Rear mounting on Avant 700 series is also possible – requires double acting auxiliary hydraulics outlet and attachment mounting plate (part no. A35412) in the rear. 218 220 313S 320S 320S+ 419 420 Very compatible 520 525LPG 528 Compatible R28 R35 630 635 Incompatible 640 745 750 69 Property maintenance Towable sand / salt spreader The towable sand / salt spreader is a very handy and economical attachment for winter maintenance of yards and walkways. Power to the spreader shaft is taken mechanically from the wheels. Wheels are equipped with a clutch which allows transporting without sand spreading. Equipped with a 50 mm trailer coupling. ATTENTION! The loader must be equipped with a trailer coupling (A31417 or A2952) • Economical spreader, quick to attach on the trailer coupling • Mechanical power take off from the wheels – no need for rear auxiliary hydraulics • Includes a durable rain cover to protect from moisture and spillage 200, 300, 400, 500, R, 600 and 700 series 218 70 220 313S 320S 320S+ 419 420 Very compatible 520 525LPG 528 Compatible Spreading width 1000 mm Width 1500 mm Volume 215 l Weight 55 kg Operation Mechanical Product no A415430 Price £925.00 R28 R35 630 635 Incompatible 640 745 750 Property maintenance Vacuum brush The vacuum brush is intended mainly for collecting of tree leaves in parks, lawns, yards etc. The powerful vacuum unit sucks the waste first into the vacuum on the bottom of the collector box and then into the box, compacting everything into a tight package. The mouthpiece on the vacuum unit has a brush that loosens also more compacted and wet leaves and waste. Brush rotation speed can be adjusted steplessly. The vacuum brush can be equipped with one or two side brushes. If only one side brush is in use, it can be mounted on either side of the vacuum mouthpiece. The collector box is mounted on top of the vacuum unit and it has large windows so that you can easily monitor how the box is filling up. The box is emptied by opening the front lid from Avant’s driver seat and with the help of Avant’s boom the collected waste can be tipped into a container, skip etc. • Equipped with Optifloattm -system • Can be emptied from Avant’s driver seat R, 600 and 700 series Width without side brooms 1200 mm Width with one side broom 1650 mm Width with two side brooms 2100 mm Collector box volume 800 l Product no A34714 Price £4,295.00 The optional attachment control switch pack A34700 is recommended on the loader. 218 220 313S 320S 320S+ 419 420 Very compatible 520 525LPG 528 Compatible R28 R35 630 635 Incompatible 640 745 750 71 Property maintenance • An inexpensive access platform with 5 meters working height. • Safe and legal way to do building repairs, painting, light bulb changes etc. • The maximum allowed load on the basket is 200 kg and you are able to use the lift alone. • Leguan 50 is attached to Avant which makes it easy to set it up in virtually all kinds of terrains. • The Leguan 50 access platform gives even further possibilities to use your Avant on work sites. 400, 500, R, 600 and 700 series Leguan 50 access platform Avant and its daughter company Leguan Lifts have joined their forces and created an acces platform which is mounted directly into Avant loaders quick attach plate. The result is an inexpensive, handy and easy to use acces platform. With the help of this lift Avant’s versatility is further increased on the job sites. The Leguan 50 is mounted directly on to Avants quick attach plate like any other Avant attachment. This makes it fast and easy to mount it on and take it off. The lift is designed according to all access platform directives and it is CE-certified. The safe working load for the lift is 200 kg which means it is allowed for operation with two men or one man with plenty of tools. Max. allowed load 200 kg Max. working height 5,0 m Height (with lowered platform) 1900 mm Width 1300 mm Weight 435 kg Product no A34812 Price 218 72 220 313S 320S 320S+ 419 420 Very compatible 520 525LPG 528 Compatible R28 £6,350.00 R35 630 635 Incompatible 640 745 750 Property maintenance Tipping trailer Avant tipping trailer is available in two models: with carrying capacity of 1200 kg or 1800 kg. Both are equipped with hydraulic tipping. All sides can be removed if necessary. Extra side set is available as an option for the smaller model, on the bigger model it is standard. ATTENTION! The loader must be equipped with the double acting rear auxiliary hydraulics outlet and trailer coupling. • Robust and versatile tipping trailers, well suited both for earthmoving and for lighter jobs • All sides can be removed if necessary – giving a completely flat and even bed • Hydraulic tipping on both models 400, 500, R, 600 and 700 series Model 1200 1800 1200 kg 1800 kg Width 1125 mm 1350 mm Length 1710 mm 2240 mm Max. Load Tyre size 23x8,50-12 26x12-12 Side height 280 mm 560 mm Product no A2949 A21200 £1,900.00 £3,150.00 Price Option: Extra side set (A45193) for 1.200 kg model, £670.00 Model 218 220 313S 320S 320S+ 419 420 520 525LPG 528 R28 R35 630 635 640 745 750 1200 1800 Very compatible Compatible Incompatible 73 Property maintenance Trailer / timber trailer Avant trailer with manual tipping is useful when transporting garden waste, topsoil, mulch etc. In addition, all sides can be removed if necessary, which makes the trailer an excellent timber transporting vehicle. Big wheels guarantee it will travel on wet ground as well. Equipped with a rotating trailer coupling, for 50 mm ball hitch. Both single and tandem axle versions available. • Versatile – can be used both as a normal and timber trailer 200, 300, 400, 500, R, 600 and 700 series Model Single axle Double axle Own weight 100 kg 130 kg Total weight 500 kg 800 kg Floor size 650 x 1750 mm Total width 1200 mm Product no Price 218 74 220 313S 320S 320S+ 419 420 Very compatible 520 525LPG 528 Compatible R28 R35 630 A21110 A21111 £1,200.00 £1,550.00 635 Incompatible 640 745 750 Groundcare Lawn mower 1000 Avant lawn mower 1000 is a strong and powerful mower, designed especially for Avant 200 series. It is a mulching mower as standard, but can be transformed to rear ejecting type for increased power, when cutting higher grass. Cutting height can be adjusted with 10 mm spacers on each wheel. Four large rubber support wheels guarantee that mower deck follows the ground well. • Powerful mower • Equipped with a floating system – works on uneven grounds as well 200 series Model 1000 Cutting width 1000 mm Blades 2 pcs Cutting height n. 30 - 100 mm Weight 95 kg Product no 218 A21076 Price £1,595.00 Product no 220 A21109 Price Model 218 220 313S 320S 320S+ 419 420 520 525LPG 528 R28 £1,595.00 R35 630 635 640 745 750 A21076 A21109 Very compatible Compatible Incompatible 75 Groundcare Lawn mower 1200 Lawn mower 1200 has a professional frame and transmission design which makes it a strong cutting unit that will keep running for years. The cutting unit is equipped with two blades which provide excellent cutting power. Lawn mower 1200 can be transformed to side discharging, mulching or rear ejecting type. All necessary parts are included as standard in the mower package. Cutting height can be adjusted with 10 mm spacers on each wheel. Four large rubber support wheels guarantee that mower deck follows the ground well. • Powerful mower • Can be transformed to side discharging, mulching or rear ejecting type. All necessary parts are included as standard. • Equipped with a floating system – works on uneven grounds as well Avant 220 Cutting width 1200 mm Blades 2 pcs Cutting height 25 - 100 mm Weight 170 kg Product no A21127 Price £1,875.00 400, 500, R, 600 and 700 series Cutting width 1200 mm Blades 2 pcs Cutting height 25 - 100 mm Weight 170 kg Product no A21046 Price Model 218 220 313S 320S 320S+ 419 420 520 525LPG 528 R28 £1,875.00 R35 630 635 A21127 A21046 76 Very compatible Compatible Incompatible 640 745 750 Groundcare Lawn mower 1500 Avant’s biggest lawn mower is intended for professional lawn mowing also on larger areas. The mower can be modified to right type of mowing for different circumstances. Powerful mower allows a higher drive speed and perfect cut also on challenging conditions. OptifloatTM –system ensures that the cutting is easy and that the cutting deck follows the ground contours also on uneven terrains. The floating system is also equipped with a safety valve, which stops the blades when the mower is lifted off the ground. • Equipped with Optifloattm – system • More cutting power for challenging mowing conditions • Side discharge as standard, mulching kit available as an option • Rounded edges è less damage to trees, buildings etc. in case of contact 600 and 700 series Cutting width 1500 mm Blades 3 pcs Cutting height 25 - 100 mm Height 450 mm Weight 220 kg Product no A34528 Price £3,095.00 Optional extras: Mulching kit (complete assembly kit) A34530 £115.00 218 220 313S 320S 320S+ 419 420 Very compatible 520 525LPG 528 Compatible R28 R35 630 635 Incompatible 640 745 750 77 Groundcare Collecting lawn mower 1200 • Powerful cutter with a collector unit • Can also be used for collecting tree leaves on lawns • Vacuum fan can be turned off and mower can be used as side discharging type. With the Avant collecting mower 1200 you can easily do the mowing and collect the clippings. Thanks to its excellent suction power collecting of leaves from the lawns is also possible. The mulching blades of the mower crush the grass clippings, leaves etc. into a very fine material which then moves to the collector and forms a tight and compact package. The cutting waste is ideal material for composting. Collector capacity is as big as 210 litres, which enables cutting of small to medium sized areas. Emptying of the collector is very easy: open the lid, lift the mower up from the ground with Avant’s boom and then tilt the mower forward so that the waste comes out. 200, 400, 500, R, 600 and 700 series Cutting width 1200 mm Blades 2 pcs Cutting height 25 - 100 mm Collector box volume 210 l Product no A21316 Price £3,400.00 Product no 200 series A21315 Price 218 78 220 313S 320S 320S+ 419 420 Very compatible 520 525LPG 528 Compatible R28 £3,400.00 R35 630 635 Incompatible 640 745 750 Groundcare Collecting lawn mower 1500 • Equipped with OptifloatTM – system • More cutting power for challenging mowing conditions • Vacuum fan can be turned off and mower can be used as side discharging type. • Rounded edges è less damage to trees, buildings etc. in case of contact R, 600 and 700 series Collecting mower designed for professional use with 1500 mm cutting width and 800 liter collector box. The high suction power makes it also possible to collect tree leaves on lawns. The blades cut the grass, tree leaves etc. to a fine mulch which packs tightly into the collector box. Collector box volume is designed to be large enough for professional use also in larger areas. The box is emptied from Avant’s driver seat with an electric switch and with the help of Avant’s boom the collector can be emptied into a container, skip etc. Cutting width 1500 mm Height 1100 mm Blades 3 pcs Cutting height 25 - 100 mm Collector box volume 800 l Product no A34495 Price £5,585.00 The optional attachment control switch pack A34700 is recommended on the loader. 218 220 313S 320S 320S+ 419 420 Very compatible 520 525LPG 528 Compatible R28 R35 630 635 Incompatible 640 745 750 79 Groundcare Flail mower Flail mower is a drum-type cutter, intended for cutting of long grass, scrub, bush and similar vegetation. It will cut up to 20 mm thick tree branches with ease. The blades on the flail mower shaft move freely, so in case they hit a solid obstacle they will give in rather than break. This saves the blades costs when cutting in an unfamiliar place. Flail mower is the optimal cutting device for places where you need a lot of cutting power and a rougher cut will do. The most common grounds for flail mowers are places with taller vegetation like meadows, road banks, yard areas etc. • Renewed floating system: Vertifloat tm • More cutting power trough renewed blade configuration 200, 400, 500 and R series Cutting width 1100 mm Cutting height 25 - 100 mm Blades 60 pcs Weight 260 kg Product no A21386 Price £2,995.00 Product no 200 series A21387 Price £2,995.00 R, 600 and 700 series Cutting width 1300 mm Cutting height Blades 68 pcs 42 pcs Weight 290 kg 315 kg Product no Price Model 218 220 313S 320S 320S+ 419 420 520 525LPG 528 R28 R35 630 A21364 A21362 £3,775.00 £4,325.00 635 1100 1300 1500 80 Very compatible Compatible 1500 mm 25 - 100 mm Incompatible 640 745 750 Groundcare Fingerbar mower with hydraulic boom • Versatile attachment for hedge cutting and hay mowing Versatile attachment for hedge cutting, long hay mowing etc. The hydraulically operated boom gives excellent outreach, and it can be extended to both sides of the machine. Strong fingerbar type cutting head can cut max. 25 mm branches. 200, 400, 500, 600 and 700 series Outreach 3500 mm Cutting width 1200 mm Weight 218 220 313S 320S 320S+ 419 420 Very compatible 520 525LPG 528 Compatible 225 kg Product no A411395 Price £5,895.00 Product no 200 series A410726 Price £5,895.00 R28 R35 630 635 Incompatible 640 745 750 81 Groundcare Edge trimmer • Cuts the lawn edge accurately, leaving a finished look on lawns, flower beds, driveways, walkways etc. • Hydraulic trimmer mills the soil efficiently Avant edge trimmer is the perfect attachment for trimming the edges of lawns, hedges, flower beds etc. It consists of a hydraulically operated trimmer mounted next to a cutting disc. Cutting disc cuts lawn precisely where you want and hydraulic trimmer breaks up any soil or lawn that is left to the side of the cutting disc. Edge trimmer leaves a good looking finish to any garden thanks to its adjustable cutting depth and precise control. The edge trimmer can be mounted on both sides of the machine, which makes driving in confined places easier. The trimmer can also be mounted on both sides of the cutting disc, so that the operator can choose if the lawn edge is cut from the inside or outside. 400, 500, R, 600 and 700 series Cutting depth max. 150 mm Weight 65 kg Product no A21068 Price 218 82 220 313S 320S 320S+ 419 420 Very compatible 520 525LPG 528 Compatible R28 £1,695.00 R35 630 635 Incompatible 640 745 750 Landscaping Rotary hoe Avant rotary hoe is the basic attachment for soil cultivating, seed bed finishing and rotovating. Adjustable cultivating depth up to 150 mm. Can be equipped with a field roller which compacts the ground after cultivating. • An inexpensive and robust rotary hoe 200, 300, 400, 500, R, 600 and 700 series Working width 1000 mm Working depth 1300 mm 50 - 150 mm Weight 160 kg 180 kg Product no A2808 A21163 £2,050.00 £2,595.00 Price Product no 200 series Price A21102 - £2,050.00 - Optional extras: - Field roller for 1000 mm rotary hoe A2972 - Field roller for 1300 mm rotary hoe A21164 Model 218 220 313S 320S 320S+ 419 420 520 525LPG 528 R28 R35 630 635 640 745 750 1000 1300 Very compatible Compatible Incompatible 83 Landscaping Stone burier A professional hydraulic stone burier for preparation of lawn beds. The stone burier mills the soil, buries eventual stones and other objects up to 150 mm depth in a single pass, making a milled and tamped topsoil. Working depth is steplessly adjustable with the rear field roller. With the optional seeding unit you are able to make a ready lawn surface on one pass. Stone buriers are most commonly used when the topsoil needs to be milled thoroughly. The soil is milled more thoroughly and deeper than with a rotary harrow. • Professional, efficient stone burier • Top grade finish with just one pass • Can be equipped with seeding unit è ready lawn surface in a single pass 400, 500, R, 600 and 700 series Model 1130 1300 1500 Working width 1130 mm 1300 mm 1500 mm Roller width 1320 mm 1500 mm 0 - 150 mm Working depth Optional extras: - Seeding unit for 1130 mm model (A21011), £1,695.00 - Seeding unit for 1300 mm model (A21238), £1,835.00 - Seeding unit for 1500 mm model (A410304), £1,995.00 Model 218 220 313S 320S 320S+ 419 420 520 Weight 218 kg 250 kg 290 kg Weight with seeding unit 250 kg 290 kg 330 kg Product no Price 525LPG 528 R28 A21010 A21237 A410303 £3,325.00 £3,665.00 £3,865.00 R35 630 635 1130 1300 1500 84 Very compatible 1700 mm 0-160 mm Compatible Incompatible 640 745 750 Landscaping Rotary harrow • Professional, efficient rotary harrow for topsoil levelling • Top grade finish with just one pass Avant rotary harrow is an excellent leveler for lawn beds, yards, • Can be equipped with seeding gardens etc. – for places where the ground needs to be perfectly unit è ready lawn surface in a levelled. It harrows only the topsoil and gives a very nice finish for single pass sowing. Required output is lower than that of the stone burier which • Requires less power than stone burier allows also a higher working speed. Working depth is adjusted with the rear field roller which levels the seeding bed during 200, 400, 500, R, 600 and 700 series operation. With the optional seeding unit you are able to make a ready lawn surface on one pass. Rotary harrows are most commonly used for lighter topsoil levelling. The soil is normally not milled as deep or as thoroughly as with a stone burier. 1200 1350 1500 1700 Working width Model 1050 mm 1220 mm 1400 mm 1550 mm Roller width 1200 mm 1350 mm 1500 mm 1700 mm 180 kg 220 kg 250 kg 290 kg - 260 kg 290 kg 330 kg Working depth Weight 0-160 mm Weight with seeding unit Optional extras: - Seeding unit for 1350 mm model (A21085), £1,595.00 - Seeding unit for 1500 mm model (A21193), £1,835.00 - Seeding unit for 1700 mm model (A415800), £2,695.00 Model 218 220 313S 320S 320S+ 419 420 Product no - A21077 A21185 A21431 Price - £4,465.00 £4,685.00 £6,935.00 Product no 200 ser Price 520 525LPG A21116 - - - £3,655.00 - - - 528 R28 R35 630 635 640 745 750 1200 1350 1500 1700 Very compatible Compatible Incompatible 85 Landscaping Leveller • Economical attachment for levelling gravel and other soil materials • Eliminates almost all manual shoveling at job sites A simple and inexpensive but incredibly useful and efficient attachment for levelling and planing of larger areas. With Avant leveller you can easily and quickly level sand, mulch etc. The leveller is most commonly used in: - Preliminary lawn bed levelling - Yard sand levelling - Driveway levelling The leveller can also be used for lifting job site materials like sod rolls, tools etc. 200 series Width Weight Product no 1200 mm 85 kg A33031 Price £385.00 300, 400, 500, R, 600 and 700 series 218 86 220 313S 320S 320S+ 419 420 Very compatible 520 525LPG 528 Compatible Width Weight Product no 1200 mm 85 kg A32411 £385.00 1500 mm 95 kg A33537 £575.00 R28 R35 630 635 Incompatible 640 Price 745 750 Landscaping Ripper • An inexpensive tool for removing of rocks, tree stumps, roots etc. from the ground • Eliminates a huge amount of manual work The ripper is an inexpensive and practically irreplaceable tool in ground works. With the ripper it is easy and effortless to remove roots as well as rocks even from hard packed ground. The replaceable hard metal teeth guarantee a long lifespan for the attachment. The ripper is operated by pressing the three blades into the ground next to the object you wish to remove. When the teeth have sunk into the ground, tilt the ripper inwards and then lift the boom upwards which will bring the object on top of the ground. 200 series Width 500 mm Working depth appr. 300 mm Weight 50 kg Product no A46332 Price £405.00 300, 400, 500, R, 600 and 700 series Width 500 mm Working depth appr. 300 mm Weight 218 220 313S 320S 320S+ 419 420 Very compatible 520 525LPG 528 Compatible 50 kg Product no A44412 Price £405.00 R28 R35 630 635 Incompatible 640 745 750 87 Landscaping Screening bucket Avant screening bucket separates different sized soil materials effectively thanks to its unique construction. The purpose of the screening bucket is to separate larger and smaller particles from the soil and not crush the larger material into smaller particles. Topsoil making for landscaping, nurseries and wholesale is the principal use for Avant screening bucket. Main advantage of the screening bucket is that no sharp particles are crushed into the material, making it safe to use in garden and park areas. Avant screening bucket also makes it possible to alter the topsoil composition for different uses. You can mix peat, sand, silt, clay or moraine into the topsoil, in order to make the soil composition right for different purposes. Back fillings (padding) of pipes, cables and underground tanks are also ideal jobs for a screening bucket. One can screen the fine material on top of the pipes or tanks to protect them, and there is no need to transport finer material to the work site separately. On the demolition and construction site you can separate different sized construction and demolition waste, making it easier to recycle them. • Multifunctional. Landscaping contractors can make topsoil directly on the work site with the same machine they are using for other jobs. • Cost and time saving. No need to transport ready screened topsoil to the work site. • Heavy duty construction. Designed for professional screening work. 400 500 and R series Model Price AV-3-800 £4,995.00 R, 600 and 700 series Model 218 88 220 313S 320S 320S+ 419 420 Very compatible 520 525LPG 528 Compatible Price AV-3-800 £4,995.00 AV-4-1000 £5,995.00 R28 R35 630 635 Incompatible 640 745 750 Landscaping Stump buster and stump grinder • New, safe way for removing of tree stumps • Uncomplicated design, easy to operate A new safer and faster way of removing tree stumps! The stump buster is an efficient, easy and safe way for removing tree stumps. The three blade drill head has slow speed and high torque, which means it can be used within confined spaces and pedestrian areas safely. The stump buster drills either a 250 mm or a 350 mm diameter hole into the tree stump, shaving off the wood as it turns. Works for soft wood and old hard wood stumps. 400, 500, R, 600 and 700 series 313S 320S Max. torque 5873 Nm Drive shaft length 500 mm 300 kg Product no: Auger unit A33571 Price £3,500.00 Optional extras: Drill bit Ø 250 mm, A33572, £1,150.00 Drill bit Ø 350 mm, A33573, £1,235.00 Traditional stump grinder with horizontal cut with effective 45mm diameter cutting blade. 45 degree manual rotating. 220 XHD92 Weight Stump Grinder 218 Stump buster 320S+ 419 Stump grinder Price AV-45-SC 420 Very compatible 520 525LPG 528 Compatible R28 R35 £3,600.00 630 635 Incompatible 640 745 750 89 Landscaping Stone grab • Scissor type lifting device for: - Kerb stones - Concrete components - Tombstones - Natural stones • Scissor mechanism is completely mechanical, doesn’t require hydraulics The mechanical stone grab is easy to mount on the Avant jib boom. Thanks to the powerful gripping force it can handle concrete components, kerb stones, natural stones, tombstones etc. The stone grab is equipped with: - Lifting eye for attaching to Avant jib boom hook - Automatic load release - Changeable rubber covered steel grabs - Spring loaded bolt for quick and easy opening width adjustment The stone grab is best mounted on an Avant with telescopic boom. With the Avant jib boom (A32395) and telescopic boom extended the max. outreach is 2100 mm, measured from the front wheel. When using the telescoping Avant jib boom A21342 maximum outreach is as high as 3050 mm. ATTENTION! Avant jib boom (A32395 or A21342) is required for lifting of the stone grab. 300, 400, 500, R, 600 and 700 series Gripping width 50 - 480 mm Jaw height 170 mm Jaw length 420 mm Lifting capacity 900 kg Weight 55 kg Product no A21179 Price 218 90 220 313S 320S 320S+ 419 420 Very compatible 520 525LPG 528 Compatible R28 £1,345.00 R35 630 635 Incompatible 640 745 750 Landscaping Stone installation clamp • For professional and fast stone laying • Minimizes hand labour and intensive manual lifting With the hydraulic installation clamp you can lay paving stones quickly and efficiently. The installation clamp takes a whole layer of paving stones directly from a pallet, which can then be lifted on to the area to be paved. The hydraulic installation clamp is equipped with: - adjustable side grippers for the exact shaping of the installation pattern. - hydraulic rotation - ADV pushing off device. The ADV presses the blocks into the laying course automatically once the clamp is opened – this way the cocking of the blocks can be avoided and a lot of time is saved, because one doesn’t have to reposition the blocks by hand. Avant jib boom (A32395) is also required, for lifting and handling of the clamp. 218 220 313S 320S 320S+ 419 420 Very compatible 520 525LPG 400, 500, R, 600 and 700 series Gripping width 575 - 1245 mm Total width 990 - 1480 mm Lifting capacity 400 kg Weight 230 kg Product no A21180 Price £13,500.00 Requires attachment control switch pack A34700 on the loader 528 Compatible R28 R35 630 635 Incompatible 640 745 750 91 Landscaping Grabbing tool • Easiest way to lift and transport plants, trees, barrels etc. without damaging them • Excellent tool for nurseries and landscapers Grabbing tool is mainly intended for lifting and handling of round objects. It is especially suited for lifting of barrels and plant and tree pots. Grabbing force can be adjusted, which means all kinds of objects can be handled without damaging them. Grabbing tool is equipped with two smaller, rubber padded grabs which allow handling of smaller and more fragile objects as well. When the grab is opened completely it can take larger objects like barrels, bigger plant pots etc. 400, 500, R, 600 and 700 series Min. grab diameter 250 mm Max. grab diameter 1200 mm Max. load 650 kg Weight 95 kg Product no A34290 Price 218 92 220 313S 320S 320S+ 419 420 Very compatible 520 525LPG 528 Compatible R28 £1,595.00 R35 630 635 Incompatible 640 745 750 Digging and construction Backhoe 170 • A powerful, strong and compact backhoe • Easy to connect and disconnect to Avant Avant backhoe 170 is for 200 series and designed especially with user friendliness and straight forward construction in mind. Backhoe 170 is a small backhoe, which is at its best on smaller, confined areas. Boom movement speeds are steplessly adjustable, which makes operation easier also for inexperienced users. To facilitate the digging the frame of the backhoe is as low as possible, which gives unrestricted visibility to the work area. • Smooth movements with precise control valve, easy to operate • Uncomplicated and economical backhoe 200 series Max. Digging depth 1700 mm Standard bucket 250 mm Weight 180 kg Product no A33748 £3,790.00 Optional extras: Bucket 400 mm A33960, £365.00 218 220 313S 320S 320S+ 120º 1765 1500 2400 Price 2300 419 420 Very compatible 520 525LPG 528 Compatible R28 R35 630 635 Incompatible 640 745 750 93 Digging and construction • A powerful, strong and compact backhoe • Easy to connect and disconnect to Avant • Smooth movements with precise control valve, easy to operate • Uncomplicated and economical backhoe Backhoe 210 Avant backhoe 210 was renewed completely in 2009. The main focus in design was user friendliness and straight forward construction. Backhoe 210 is slightly larger than its smaller sister backhoe 170, which makes it more versatile and gives more digging depth. Boom movement speeds are steplessly adjustable, which makes operation easier also for inexperienced users. To facilitate the digging the frame of the backhoe is as low as possible, which gives unrestricted visibility to the work area. 300, 400, 500, 600 and 700 series Max. Digging depth 2100 mm Standard bucket 400 mm Weight 190 kg Product no A33747 £4,115.00 Optional extras: Bucket 250 mm A415232 £295.00 Bucket 750 mm A35564 £495.00 218 94 220 313S 320S 320S+ 120º 2100 1750 2800 Price 2700 419 420 Very compatible 520 525LPG 528 Compatible R28 R35 630 635 Incompatible 640 745 750 Digging and construction Backhoe 260 Backhoe 260 is a completely new backhoe model from Avant. It replaces earlier backhoe models 220 and 250. The new model has many improved features: Boom swing happens with two hydraulic cylinders, instead of the single cylinder and chain drive in the old models. The new system gives more exact boom movements when swinging and requires less service. Swing angle is 170 degrees. Backhoe 260 is equipped with hydraulic outriggers as standard. The operator can easily adjust the outriggers with the lever on the backhoe control valve. This allows quick and easy set up also on uneven terrains. Changing of bucket is easy thanks to the quick attach mechanism. Mounting the backhoe on Avant is very fast, and the new foldable control valve bank and locking system on the boom make it even easier. • Powerful and professional backhoe with good outreach • Hydraulic outriggers • Bucket quick attach system • 170 degree boom swing angle with consistent speed • Dozer blade on front frame • Several bucket options 2100 3300 500, 600 and 700 series 218 220 313S 320S 320S+ 419 2600 Optional extras: - Bucket 250 mm A414301, £405.00 - Bucket 750 mm A35230, £685.00 - Bucket 1000 mm A35383, £725.00 - Quick attach adapter S30-150 with sideways tilt A35249, £695.00 3500 420 Very compatible 520 525LPG 528 Compatible Max. Digging depth 2600 mm Width 1300 mm Boom swing angle 170 º Standard bucket 400 mm Weight 420 kg Product no A35248 Price R28 £6,295.00 R35 630 635 Incompatible 640 745 750 95 Digging and construction Mini digger • NEW: Bucket tilt adapter available as an option for 400-700 series mini digger • Very fast to mount on Avant • Simple and light to transport from job site to another • High unloading height • Material can easily be transported further away • Economical Avant mini digger is an efficient solution for small digging operations where maximum digging depth of 1500 mm is enough (1200 mm for 200 series) and digging is not an everyday work. It mounts directly on the quick attach plate of the loader and is operated with the auxiliary hydraulics control lever (with pedal on 200 series). Dumping to the side is happens by turning the steering wheel of the Avant. Changing of bucket on the new mini digger 150 for 400-700 series is fast and easy thanks to the quick attach system, and the bucket can also be mounted pointing forward if necessary. Bucket tilt adapter is available as an option. 200 series Max. digging depth 1200 mm Unloading height 1500 mm Bucket 250 mm Weight 45 kg Product no A33153 Price £965.00 400, 500, 600 and 700 series Max. digging depth Optional extras: Bucket tilt adapter Bucket 250 mm with teeth Bucket 750 mm, straight edge Bucket 1000 mm, straight edge 218 96 220 313S 320S A35320, A414301, A35230, A35383, 320S+ 419 Very compatible 520 Standard bucket 400 mm Buckets available 250/400/750/1000 mm Weight £550.00 £405.00 £685.00 £725.00 420 1500 mm 130 kg Product no A35317 Price 525LPG 528 Compatible R28 £1,595.00 R35 630 635 Incompatible 640 745 750 Digging and construction Trencher With Avant and trencher you can easily dig narrow trenches without damaging the ground on the digging area. The trencher does a clean trench which can easily be filled with a bucket or a dozer blade. Planetary drive with hydraulic motor guarantee powerful and trouble free operation. Digging depths are 900 and 1200 mm respectively, depending on model. Digging width is either 100, 150 or 200 mm, depending on the width of the trenching chain. Trencher chains have tungsten reinforcements to ensure long lasting performance in all soil conditions. • Trencher is ideal for smaller cable or pipe laying • Digging speed with a trencher is 2-3 times quicker compared to a backhoe • Combination of an articulated Avant and trencher leaves almost no marks of digging operations after the work is done. This makes it a perfect solution for gardens and other lawn areas. 218 220 313S 320S 320S+ 419 420 Very compatible 520 525LPG • Very fast and clean way to dig trenches for cables, drains, piping etc. • Digs only 100-200 mm wide trench and moves all ground to the right side of the trench • Minimal damage to the ground on trenching area. 300, 500, 600 and 700 series Model Price AHDT900100E T900-100mm wide, earth chain £3,465.00 AHDT900100C T900-100mm wide, tungsten chain £3,555.00 AHDT900150E T900-150mm wide, earth chain £3,495.00 AHDT900150C T900-150mm wide, tungsten chain £3,735.00 AHDT900200E T900-200mm wide, earth chain £3,525.00 AHDT900200C T900-200mm wide, tungsten chain £3,765.00 528 Compatible R28 R35 630 635 Incompatible 640 745 750 97 Digging and construction Auger • Wide range of augers enable the efficient use of 75 mm to 900 mm augerbits • The right auger for your work depends on the maximum drill diameter needed. Choose the right auger unit for your work from the table below • The replaceable Tungsten teeth on all auger drills ensure long lifespan also on professional day to day use. Powerful hydraulic auger with many different auger diameters to suit various tasks, be it post hole boring, tree transplanting etc. Standard drive unit has hydraulic motor and direct drive to the auger. Heavy duty drive unit is equipped with planetary drive to increase torque, needed especially in hard ground conditions or when using large diameter augers. Replaceable tungsten teeth and pilot head are a standard 200 series feature in the auger heads. Model Drills Torque Prod. no Price This enables drilling in hard ground as well as in sandstone. Direct drive 75-300 mm 1355 Nm A21096 £925.00 Combination of an articulated Avant and auger offer excellent 300, 400, 500, R, 600 and 700 series visibility and minimum ground Model Drills Torque Prod. no Price damage. Drill Drill Drill Drill Drill Drill 75 mm A34225, 100 mm A33601, 150 mm A33608, 200 mm A33609, 225 mm A33610, 250 mm A33611, 218 98 220 313S £195 £220 £245 £250 £265 £280 320S Drill Drill Drill Drill Drill Drill 300 mm A33612, 350 mm A33613, 400 mm A33614, 450 mm A33615, 500 mm A33616, 600 mm A33617, 320S+ 419 420 Very compatible £290 £315 £325 £360 £405 £495 520 HD 35 75-400 mm 1886 Nm A34436 £1,235.00 HD 45 75-600 mm 2452 Nm A33552 £1,265.00 HD 58 75-750 mm 3017 Nm A33551 £1,315.00 HD 72 75-900 mm 3874 Nm A34032 £1,535.00 Drill 750 mm A33618, £675 Drill 900 mm A33619, £795 Extension 500 mm A33546, £160 525LPG 528 Compatible R28 R35 Extension 800 mm A32532, £170 Extension 1000 mm A33554, £185 630 635 Incompatible 640 745 750 Digging and construction Hydraulic breaker Avant breakers are specially designed for use with Avant loaders. • Top quality sound isolated From three different models you can find suitable for all 300, 400, Avant breakers are quiet and 500, 600 and 700 series models. powerful Avant loader with breaker is a very efficient tool in demolition and • Breakers are pre-adjusted refurbishing operations: do the demolition with Avant and breaker, at the factory to suit Avant take the debris away with Avant and bucket – very fast and effective. Another benefit of this combination is its compact dimensions: you loaders. There is a breaker for can go almost anywhere with this unit. each Avant model. Avant breakers are the • All hoses and adapter plates fastest, easiest and most are included in the packaging efficient breakers for so the combination is all ready Avant loaders. All hoses, couplings and quick attach for work brackets are included in the package. In addition 300, 400, 500, 600 and 700 series to this all set ups have Model Impact Weight Product Price been done to the breaker energy no already at the factory so AVANT B70 112 J 70 kg A33811 £3,315.00 you can be sure you have a fully functioning package AVANT B110 180 J 110 kg A33812 £4,055.00 on the worksite. AVANT B160 Model 218 220 313S 320S 320S+ 419 420 520 525LPG 528 270 J R28 R35 160 kg 630 A33813 635 640 £4,950.00 745 750 B70 B110 B160 Very compatible Compatible Incompatible 99 Digging and construction Cutter crusher Avant cutter cruscher is intended for professional demolition work. With the cutter crusher you are able to crush the concrete, brick etc. and cut the metal rebars into convinient pieces with the same tool. The cutter crusher has changeable blades in both crushing jaw as well as in cutting jaw. The cutter crusher can be rotated endlessly straight from the operators seat with the help of an adustable mechanical rotation. • Efficient, noise and vibration free crushing 500, 600 and 700 series Jaw opening 400 mm Max cutting force 750 kN Max crushing force 240 kN 360 deg (endlessly) Rotation Weight 350 kg Product no A34357 Price 218 100 220 313S 320S 320S+ 419 420 Very compatible 520 525LPG 528 Compatible R28 £12,745.00 R35 630 635 Incompatible 640 745 750 Drum type concrete mixer Digging and construction • Economical attachment for more occasional concrete mixing • Easy way to make concrete in places where electricity is not available • Ready mixed concrete is easy to transport and lift to desired place Concrete mixing drum is a handy tool when you need to make concrete without electricity or when you need to transport or lift the concrete to a place that is hard to reach. Mixing is done hydraulically and emptying is done simply by tipping the drum forward. 300, 400, 500, R, 600 and 700 series Volume 80 l Operation hydraulic Weight 55 kg Product no A2950 Price 218 220 313S 320S 320S+ 419 420 520 Very compatible 525LPG 528 R28 £955.00 R35 Compatible 630 635 640 745 750 Incompatible Concrete mixing bucket Concrete mixing bucket is a handy tool when you need to make concrete without electricity or when you need to transport or lift the concrete to a difficult place. Bucket can be filled directly from the ground like a normal bucket and mixing is performed hydraulically. Ejecting can be done by just opening the ejecting hatch or using the chute to guide the concrete. • Easy and efficient way to make concrete in places where electricity is not available • The mixed concrete is easy and effortless to transport and pour into desired place • Gravel can be filled into the bucket directly from the ground • Concrete can be ejected up to 2 m height. With the chute ejecting is easy and accurate. 500, 600 and 700 series 218 220 313S 320S 320S+ 419 420 Very compatible 520 525LPG 528 Compatible Volume Weight Product no Price 270 l 490 kg A21406 £3,800.00 R28 R35 630 635 Incompatible 640 745 750 101 Tarbox • Fill via Tipper Lorry chutes • Simple Hydraulic Discharge • Adjustable Strike plate for easy depth control Digging and construction An economic attachment for placing Asphalt, Tar or any Screed material’s. Ideal for pathways and areas that a placer machine cannot gain access. The AVANT Tarbox is available in 1200mm width with 200mm offset to both sides. A width reducing plate allows narrow trenches or strips to be filled. Material depth control is via screw control. The easy to operate TarBox will increase productivity on any job. 500, R, 600 and 700 series TarBox Width 1200 mm Weight 270 kg Volume 250 L Product no AVTB1200A Price £3,395.00 N.B. AVANT must be fitted with Boom Float. 218 220 313S 320S 320S+ 419 420 520 525LPG Very compatible 528 R28 R35 Compatible 630 635 640 745 750 Incompatible Vibrating plate Vibrating plate is destined for earth compacting and is easy to attach to an Avant. Compacting is easy and safe with the vibrating plate connected to Avant’s quick attach plate – the operator is not exposed to vibrations or excessive noise. 400, 500, R, 600 and 700 series Weight 150 kg Plate size 285 x 500 mm Impact force 900 kg Impact rate 2000 bpm Product no A21012 Price 218 102 220 313S 320S 320S+ 419 420 Very compatible 520 525LPG 528 Compatible R28 £3,495.00 R35 630 635 Incompatible 640 745 750 Asphalt grinder The asphalt grinder, also called “cold planer” is an ideal attachment for asphalt road and pavement repairs and utility jobs. It grinds away the asphalt surface up to 80 mm depth, making repair of potholes, utility cuts, small overlays and edge repairs fast and easy. Digging and construction • Hydraulic side shift 500 mm as standard. R, 600 and 700 series Working width 300 mm Operation hydraulic Weight 260 kg Product no A21230 Price 218 220 313S 320S 320S+ 419 420 520 Very compatible 525LPG 528 R28 £5,145.00 R35 630 Compatible 635 640 745 750 Incompatible All-round grapple Farming This versatile tool can be used for lifting and transporting of many different types of materials which cannot be handled with a normal bucket or pallet fork. The grapple is equipped with a hydraulic cylinder in the upper grapple part and it opens all the way up in vertical position. This, together with the pressing force of the cylinder, gives excellent loading and handling capabilities. Total width is 900 mm - this allows traveling through narrow doorways and working in small spaces. 200 series 218 220 313S 320S 320S+ 419 420 Very compatible 520 525LPG 528 Compatible Width Weight Product no Price 900 mm 65 kg A33065 £655.00 R28 R35 630 635 Incompatible 640 745 750 103 Farming Silage fork A robust silage fork equipped with a powerful hydraulic cylinder, can be fitted on all Avant loader models. The strong blade type pins of the grapple penetrate into all types of feed. The fork has replaceable lower tines made of reinforced steel. The grapple goes up to vertical position and this, together with the powerful cylinder enables easy grabbing e.g. on a round bale. • Compact model, which is well suited for silage distributing in small and confined places. • The front edges on the forks are rounded, which offers a smaller turning diameter. 300, 400, 500, R, 600 and 700 series Width Weight Product no Price 800 mm 85 kg A2868 £765.00 900 mm 100 kg A31512 £785.00 1050 mm 120 kg A31519 £805.00 NOTE! Avant 500, R, 600 and 700 series only with mounting bracket A34037 218 104 220 313S 320S 320S+ 419 420 Very compatible 520 525LPG 528 Compatible R28 R35 630 635 Incompatible 640 745 750 Farming XL Silage grab The larger silage grab series is intended for Avant 500, 600 and 700 series loaders, with three different widths to match machines perfectly. The new series can carry up to 30 % more silage without losing visibility on the feeding table. Open grab construction on the top offers better visibility when the grab is open. Strong heavy duty construction with two cylinders. Forged bolt-on tines also on the top grab. • Larger silage grab model, designed for larger cow houses and bigger estates • The top grab construction is completely open from the middle è Improved visibility when driving while the grab is open. • Top grab has two cylinders for improved compression power 500, R, 600 and 700 series Width Weight Product no Price 1100 mm 190 kg A21385 £1,430.00 1300 mm 200 kg A21384 £1,530.00 1500 mm 215 kg A21380 £1,610.00 Optional extras: Mounting bracket which increases tipping angle by 17 degrees A34587 218 220 313S 320S 320S+ 419 420 Very compatible 520 525LPG 528 Compatible R28 R35 630 635 Incompatible 640 745 750 105 Farming Feeding table cleaning blade • The easiest way to clean the cattle feeding table • Mounts on Avant silage forks: drive the fork into the blade with the grapple open and press the grapple down to lock the blade è no need to get out of the driver’s seat. For silage fork This cleaning blade is specially designed for clearing the cattle feeding table before distributing new silage to the table. The cleaning blade can be mounted by driving the silage fork into the blade, no need to get out of the driver’s seat which speeds up the cleaning process, because no attachment change is necessary. The cleaning blade has a rubber lip on the lower surface that ensures good cleaning result. ATTENTION! Available only together with Avant silage forks. Width 1200 mm Side extension width 550 mm Weight 50 kg Product no A2936 Price £275.00 For XL silage grab Width 1650 mm Side extension width 550 mm Weight Optional extras: Extra side extension A46337, £125.00 218 106 220 313S 320S 320S+ 419 420 Very compatible 520 525LPG 528 Compatible 75 kg Product no A35512 Price £415.00 R28 R35 630 635 Incompatible 640 745 750 Farming Silage dispenser This dispenser bucket is equipped with hydraulically driven elevator in the bottom and discharging to both right and left side. Especially recommended for precision chopped silage and feeding stuffs made with feed mixers. The dispenser bucket can be filled like a normal bucket directly from floor level. Distributes silage to about 10 cows / fill - it takes approx. 10 minutes to distribute silage to 50 cows. • A quick and easy way to distribute silage • The silage can be distributed on both sides of the bucket without making any adjustments 300, 400, 500, R, 600 and 700 series Volume 650 l Width 1370 mm Weight 240 kg Product no A21000 Price 218 220 313S 320S 320S+ 419 420 Very compatible 520 525LPG 528 Compatible R28 £2,195.00 R35 630 635 Incompatible 640 745 750 107 Farming Feed mover screw Efficient way of moving uneaten feed back in front of the cattle. When moving, the screw mixes the feed and the fresh feed remains on top. With the feed mover screw drive speed can be higher, over 10 km/h. Feed can be moved both to the right and to the left simply by changing the rotation direction. The plastic scraper blade at the rear of the attachment cleans the feeding table very efficiently. • Fast and easy way of moving feed to the animals • Discharge in both directions • High efficiency, also on larger farms • Scraper blade cleans the feeding table efficiently 300, 400, 500, R, 600 and 700 series Working width 1400 mm Total width 1635 mm Weight 120 kg Product no A21506 Price 218 108 220 313S 320S 320S+ 419 420 Very compatible 520 525LPG 528 Compatible R28 £1,695.00 R35 630 635 Incompatible 640 745 750 Silage block cutter • Strong and robust design, cuts efficiently also tightly packed silage. • 1000 mm cutter takes silage for 8 cows, 1300 mm cutter for 12 cows at a time. • Open design – good visibility also when distributing the silage • Strong lightweight construction • Tines made of hardened steel Farming Powerful and robust silage cutters with two hydraulic cylinders. With the silage cutter you can easily cut silage directly from the silo and take it to the cattle. Cutting blades are made of special steel; they cut very efficiently and leave a clean and even surface in the silo. This prevents air getting into silage and warming up. Thanks to the open design of the cutting blade visibility during silage distribution is very good. Lower tines are made of hardened steel. 300, 400, 500, R, 600 and 700 series Width 1000 mm Weight 245 kg 280 kg Product no A21276 A21257 £1,995.00 £2,195.00 Price 218 220 313S 320S 320S+ 419 420 520 Very compatible 525LPG 528 1300 mm R28 R35 Compatible 630 635 640 745 750 Incompatible Carousel broom The hydraulically operated carousel broom is a useful attachment when sweeping materials to the side or away from the wall. Rotates in both directions, can be used for various tasks especially in farm environment. • Strong broom, moves materials efficiently • Side shift allows brushing next to the wall also 300, 400, 500, R, 600 and 700 series Width 1000 mm Broom diameter 1000 mm Broom material Nylon Weight 70 kg Product no A2971 Price 218 220 313S 320S 320S+ 419 420 Very compatible 520 525LPG 528 Compatible R28 £1,785.00 R35 630 635 Incompatible 640 745 750 109 Farming Bale fork With the round bale fork transporting and lifting of unwrapped round bales is easy and safe. Square bale fork makes it easy and safe to transport and lift unwrapped square bales. Strong and simple construction ensures a long lifespan. 400, 500, R, 600 and 700 series Model Square bale fork Round bale fork Width 1005 mm 1220 mm Length 1145 mm 1150 mm Weight 58 kg 55 kg Tines 218 110 220 313S 320S 320S+ 419 420 Very compatible 520 525LPG 528 Compatible 3 pcs 2 pcs Prod. no A410225 A410224 Price £645.00 £595.00 R28 R35 630 635 Incompatible 640 745 750 Farming Round bale grab • The round bale grab transports all wrapped bales without damaging the wrappings • With Avant and bale grab you are able to pile three round bales on top of each other With the round bale grab you can lift and transport wrapped silage bales, hay bales and other round bales without damaging the plastic wrapping or net. Sturdy, yet light construction allows best possible effective load (see the table below). 300, 400, 500, R, 600 and 700 series Weight 120 kg Max. bale weight Avant 400 series 400 kg Avant 520 550 - 650 kg Avant 528 850 - 950 kg Avant 600 series 950 - 1050 kg Avant 700 series 1100 - 1200 kg Max. grab width 1500 mm Bale diameter 950 - 1450 mm Product no A21166 Price 218 220 313S 320S 320S+ 419 420 Very compatible 520 525LPG 528 Compatible R28 £1,425.00 R35 630 635 Incompatible 640 745 750 111 Square bale grab Square bale grab is destined for handling of wrapped silage bales, hay bales and other square bales without damaging the plastic wrapping or net. 400, 500, R, 600 and 700 series Farming Weight 140 kg Max. bale weight 1000 kg Bale diameter 218 220 313S 320S 320S+ 419 420 520 Very compatible 525LPG 528 80 - 120 cm Product no A410798 Price £2,495.00 R28 R35 Compatible 630 635 745 750 Incompatible Manure fork Re n Avant manure fork is a very useful attachment, destined for detaching and handling of manure and similar materials. The strong tines penetrate also into compacted manure and can carry a heavy load. 640 ew ed • NEW: Manure fork is now equipped with bolt-on replaceable tines, made of high tensile forged steel. 300, 400, 500, R, 600 and 700 series Width 1100 mm Tine length 1000 mm Fork length 1110 mm Height 415 mm Weight 218 112 220 313S 320S 320S+ 419 420 Very compatible 520 525LPG 528 Compatible 60 kg Product no A36038 Price £795.00 R28 R35 630 635 Incompatible 640 745 750 Straw blower bucket With the straw blower bucket you can distribute straw quickly and easily to the cow stalls by driving with your Avant. The blower fan discharges the material up to 3-4 m distance, depending on engine rpm. The bucket can blow chopped straw, sawdust, turf and small wood chips. The bucket can be equipped, as an option, with a scraper blade which mounts under the bucket, destined for floor cleaning. With the optional side brush one can clean the rear part of the stall as well. The bucket is available with discharge to the left. Volume 665 l Height 1270 mm Width 1460 mm Weight 120 kg Product no A21066 Price Farming 300, 400, 500, R, 600 and 700 series £5,750.00 Optional extras: Rubber swiper for cleaning the manure grate. A46033, £1,895.00 Sidebrush for cleaning the back part of the stall. A33025, £685.00 218 220 313S 320S 320S+ 419 420 520 Very compatible 525LPG 528 R28 R35 Compatible 630 635 640 745 750 Incompatible Grain/flour dispenser bucket Avant grain dispenser is a 300 l bucket equipped with a hydraulic motor and a Ø 200 mm screw, destined for distribution of flour, crushed grain etc. Discharge to the right side (on special request discharge to the left side available). The edge of the grain dispenser tilts all the way down so that loading from ground level is easy. 300, 400, 500, R, 600 and 700 series Volume 300 l Width 1100 mm Weight 90 kg Product no A1194 Price 218 220 313S 320S 320S+ 419 420 Very compatible 520 525LPG 528 Compatible R28 £1,045.00 R35 630 635 Incompatible 640 745 750 113 Farming Push broom • An inexpensive and simple broom • No rotating parts è less dust when brushing • Fits perfectly for horse stables, farming, other small scale brushing. Push broom is a handy and inexpensive broom for cleaning of smaller areas. Push broom has no rotating parts - it simply pushes the material in front of the broom. Push broom can also be used when making pavements. By pushing the filler sand sideways across the paving stones the sand will fall nicely between the stones. 200 series Width 1300 mm Weight 34 kg Product no A34076 Price £505.00 300, 400, 500, R, 600 and 700 series 218 114 220 313S 320S 320S+ 419 420 Very compatible 520 525LPG 528 Compatible Width 1300 mm Weight 34 kg Product no A34055 Price £505.00 R28 R35 630 635 Incompatible 640 745 750 Farming Horse arena harrow The horse arena harrow is intended for levelling and loosening of horse arena riding surfaces. The harrow has two spring loaded tine rows which will loosen the surface, a leveller that will make the surface completely even and a tilling roller that will compact the ground, leaving a great looking finish to the surface. The harrow will not damage the lower levels (understructure) of the riding surface. The horse arena harrow features: - A clearing shovel which will level the sides of the riding arena. - A tilling roller that will smoothen the harrowed ground leaving a great looking finish. - A large wheel that protects the walls of the riding arena in case the harrow hits the wall. - Hydraulically operated support wheels for towing the harrow outside riding arena. ATTENTION! Loader must be equipped with a single or double acting rear auxiliary hydraulics outlet and trailer coupling. • A professional harrow that makes it easy to keep the horse arena in top condition. • Can be adjusted for several kinds of riding surfaces. • Once the adjustments have been done the harrow is very easy to use. 200, 400, 500, R, 600 and 700 series Working width 1350 mm Weight 240 kg Product no A21302 Price 218 220 313S 320S 320S+ 419 420 Very compatible 520 525LPG 528 Compatible R28 £3,805.00 R35 630 635 Incompatible 640 745 750 115 Farming Big bag transporter • An inexpensive and safe way to handle big bags With the big bag transporter you can lift and transport big bags safely and securely. This simple attachment makes loading of fertilizer or stacking big bags as easy as it can get. 400, 500, R, 600 and 700 series 218 116 220 313S 320S 320S+ 419 420 Very compatible 520 525LPG 528 Compatible Lift hook height 1200 mm Width 1000 mm Weight 80 kg Product no A21162 Price £510.00 R28 R35 630 635 Incompatible 640 745 750 Farming Stone collecting bucket The stone collecting bucket - also known as riddle bucket - is intended mainly for collecting stones from the fields after the field has been harrowed. With an Avant 400, 500, R, 600 or 700 series it is easy and fast to collect stones from nearby fields. 300, 400, 500, R, 600 and 700 series Width Bar diameter 218 220 313S 320S 320S+ 419 420 520 525LPG 1370 mm 22 mm 30 mm Weight 95 kg 250 kg Product no A2999 A415432 £765.00 £895.00 Price Model 1050 mm 528 R28 R35 630 635 640 745 750 1050 1370 Very compatible Compatible Incompatible 117 Generator Power Packs Make electricity with Avant! – There are two generator models available: with 3,5 kVA or with 6,5 kVA output. The smaller model is equipped with 2x230V electric outlets, the 6,5 kVA model with 1x400V and 2x230V outlets. Generators can be used as a power source for power tools and small electrical appliances in places where net current is not available. High quality generators also guarantee electric current supply during power outages. 300, 400, 500, 600 and 700 series Power Outlets Mount Product no Price 3,5 kVA 2 x 230V Front A35407 £1,695.00 3,5 kVA 2 x 230V Rear* A35454 £1,715.00 6,5 kVA 2x230V & 1x400V Front A35408 £2,225.00 6,5 kVA 2x230V & 1x400V Rear* A35455 £2,265.00 *) Rear mounting set is included, requires double acting rear auxiliary hydraulics from the loader (Does not fit for R28 and R35). Malli 218 220 313S 320S 320S+ 419 420 520 525LPG 528 R28 R35 630 635 640 745 750 3,5 kVA 6,5 kVA Very compatible Compatible Incompatible Compressor Makes it possible to have compressed air anywhere you go. Creates max. 400 l/min air flow @ 8 bar pressure. Can be used for running power tools and, for example, filling of large tyres in places where electric current is not available, and for cleaning of big machines like combined harvesters etc. 300, 400, 500, R, 600 and 700 series Mount Product no Price Front A35409 £2,155.00 Rear* A35456 £2.215,00 *) Rear mounting set is included, requires double acting rear auxiliary hydraulics from the loader (Does not fit for R28 and R35). 218 118 220 313S 320S 320S+ 419 420 Very compatible 520 525LPG 528 Compatible R28 R35 630 635 Incompatible 640 745 750 Power Packs Pressure washer Powerful pressure washer with 20 m hose reel and a washing gun; easy to take anywhere with the Avant. Creates max. 30 l/min water flow @ 200 bar pressure. Can be connected directly to tap water supply, or water can be taken with the inlet hose from any reservoir. Can suck water via inlet hose from as much as 3 m below the level where the unit is. This is a very useful feature when taking water from a tank, reservoir, lake etc. 300, 400, 500, R, 600 and 700 series Mount Max. water flow Product no Price Front 30 l/min @ 200 bar A35411 £2,635.00 Rear* 30 l/min @ 200 bar A35457 £2,725.00 *) Rear mounting set is included, requires double acting rear auxiliary hydraulics from the loader (Does not fit for R28 and R35). 218 220 313S 320S 320S+ 419 420 Very compatible 520 525LPG 528 Compatible R28 R35 630 635 Incompatible 640 745 750 119 Log grab Forestry The Avant log grab mounts on Avant pallet fork. With the log grab • Easy mounting on pallet fork you can lift and transport single logs or smaller timber bundles. • Basic attachment for fencing The grab is equipped with a powerful hydraulic cylinder and can and forest work therefore also lift bigger stones, as well as branches, fence poles and similar objects. Requires also: Pallet fork 850 mm (A33029) for 200 series or 200 series Pallet fork 850 mm (A21047) or Pallet fork 1100 mm (A21039) Max. diame- Min. diameter Weight Product Price ter to grab to grab 900 mm Ø 180 mm no 50 kg A34822 £815.00 300, 400, 500, 600 and 700 series Max. diameter to grab Min. diameter to grab Weight Product no Price 900 mm Ø 180 mm 50 kg A33503 £815.00 Assembled to pallet forks 218 220 313S 320S 320S+ 419 420 520 Very compatible 525LPG 528 R28 R35 Compatible 630 635 640 745 750 Incompatible Log grab, heavy duty A strong log grab for customers who need to move tree trunks, logs etc. often. The grab takes a firm grip on the wood and the lower tines are also better formed for grabbing bigger tree trunks. 400, 500, R, 600 and 700 series Width 845 mm Height 990 mm Weight 218 120 220 313S 320S 320S+ 419 420 Very compatible 520 525LPG 528 Compatible 180 kg Product no A415691 Price £1,495.00 R28 R35 630 635 Incompatible 640 745 750 Tree shear Forestry Avant tree shear is an efficient and useful tree cutter, intended for forest thinning, tree clearance and similar jobs where smaller trees need to be cut. The strong grapple takes a firm grip of the tree trunk and a hydraulic cylinder pushes the cutting blade against the trunk and cuts it. The tree is then easy and fast to move away with Avant. If needed, the cutting blade can be turned 180 degrees to point backwards. This means it doesn’t cut and the unit can be used as a grapple only. 400, 500, R, 600 and 700 series Tree diameter max. 190 mm Grapple opening 770 mm Weight 110 kg Product no A35831 Price 218 220 313S 320S 320S+ 419 420 520 Very compatible 525LPG 528 313S 320S 320S+ 419 420 Very compatible 520 525LPG 630 635 640 745 750 Incompatible • Powerful and compact hydraulic winch for various tasks • The winch is mounted directly on Avant’s quick attach plate, so you are also able to use the boom for lifting materials with the winch. 200, 300, 400, 500, R, 600 and 700 series The Avant hydraulic winch enables towing of all kinds of objects (e.g. logs, poles, boats) from places where you cannot drive with the machine. The winch is equipped with a safety net, 30 m of wire rope and a towing hitch. It is powered by a powerful hydraulic motor and mounts on Avant’s quick attach plate. Use of the winch is simple, one person can easily handle it. The auxiliary hydraulics lever (pedal in 200 series) is switched to continuous flow from the driver’s seat, which releases the wire drum so that the wire can be pulled out by hand. When the wire is attached to the desired object, operator returns to driver’s seat and turns the auxiliary hydraulics lever (pedal in 200 series) into opposite direction and the winch begins to reel in the rope. 220 R35 Compatible Winch 218 R28 £3,600.00 Max. Pulling power 1000 kp Max. Reeling speed 2,3 m/s Wire length 30 m Weight 105 kg Product no A33130 Price £1,395.00 Product no 200 series A33151 Price 528 Compatible R28 £1,395.00 R35 630 635 Incompatible 640 745 750 121 Forestry Log splitter Avant log splitter is the right attachment when you have cut logs and need to make firewood quickly and easily. It is equipped with two handed operation for increased safety: there are two control levers which have to be activated with both hands before the splitting cylinder will push the log against the splitting blade. The splitters have two speeds: with lower speed splitting force is higher. Height of the blade is easily adjustable, allowing splitting either into two or into four pieces. The splitter has automatic reverse and cylinder stroke can be adjusted with a limit switch. Transportation is easy – the splitter mounts on the quick attachment plate of the loader. • Economical, powerful log splitter • Max. log diameter 400 mm • Two models: 1) for logs with max. 600 mm length and 2) for logs with max. 1000 mm length 200, 300, 400, 500, 600 and 700 series Max. log diameter 400 mm 400 mm Max. log length 650 mm 1000 mm Feeding speed 218 122 220 313S 320S 320S+ 419 420 Very compatible 520 525LPG appr. 30 logs/min Splitting force 7,6 tons Weight 150 kg 250 kg Product no A413181 A413195 Price £1,695.00 £2,495.00 Product no 200 series A413194 - Price £1,695.00 528 Compatible R28 R35 630 635 Incompatible 640 10 tons 745 750 Forestry Log cutter/splitter • Powerful and safe log processor • Automated functios make work safe and efficient • Discharge conveyor available as an option Avant log cutter/splitter is a very efficient firewood making machine. It combines a chain saw and a hydraulic log splitter. The hydraulically driven chain saw cuts the log, after cutting the log drops automatically on the splitting table where a hydraulic cylinder pushes the log against the splitting blade. Position of the splitting blade can be adjusted, according to the log diameter. The new model is equipped with a separate system with own oil tank for lubricating the saw chain. Discharge conveyor is available as an option. Discharge conveyor is available as an option (for 400700 series). Optional extras: - Discharge conveyor 218 220 313S 200, 300, 400, 500, R, 600 and 700 series Max. log diameter 300 mm Max. log length 450 mm Saw flange 13” Max. splitting force 5,6 tons Conveyer belt length 2,3 m Weight 310 kg Weight, conveyor belt 75 kg Product no A415435 Price £4,595.00 Product no 200 series A415434 Price £4,595.00 65673, £1,405.00 320S 320S+ 419 420 Very compatible 520 525LPG 528 Compatible R28 R35 630 635 Incompatible 640 745 750 123 Firewood machine With the firewood machine you can easily make firewood for your own needs. Cutting of the log happens by pushing it against a 700 mm hard metal saw blade. After that the log must be lifted by hand to the splitting table and split by pushing the log against a rotating splitting screw. 200, 400, 500, 600 and 700 series Forestry Log diameter max. 300 mm Log length max. 600 mm Saw blade diameter Ø 700 mm Splitting screw Ø 100 mm Weight 175 kg Product no A35823 Price £3,325.00 Product no 200 series A35824 Price 218 220 313S 320S 320S+ 419 420 520 Very compatible 525LPG 528 R28 £3,325.00 R35 Compatible 630 635 640 745 750 Incompatible Wood chipper CH100 A wood chipper that works also on Avant 220 and 400 series. Ideal unit for chipping wood in smaller scale. Wood feeding is manual. 200, 400, 500, R, 600 and 700 series Max wood diameter Chipping drum 100 mm Hydraulic motor with direct drive Chute turn 180 degrees (can be mounted to eject to the right or to the left) Weight 218 124 220 313S 320S 320S+ 419 420 Very compatible 520 525LPG 210 kg Product no A415436 Price £3,125.00 Product no 200 series A416180 Price £3,250.00 528 Compatible R28 R35 630 635 Incompatible 640 745 750 Forestry Wood chipper With the hydraulic Avant wood chipper you can quickly chip branches, small tree trunks, logging waste, sawmill residue etc. This powerful double-knife disc chipper can be mounted on both skid steer and articulated AVANT loaders with min. 20 hp engine. Wood feeding is manual, chips can be directed through 360 degrees by turning the discharge chute. 300, 400, 500, R and 600 series Max. timber diameter 90 mm Chip length appr. 13 mm Min. engine power 20 hp Weight 300 kg Product no A2881 Price £3,640.00 R35, 635, 640 and 700 series Max. timber diameter 160 mm Chip length appr. 13 mm Min. engine power 36 hp Weight 300 kg Product no A21260 Price Model 218 220 313S 320S 320S+ 419 420 520 525LPG 528 R28 £3,740.00 R35 630 635 640 745 750 A2881 A21260 Very compatible Compatible Incompatible 125 Forestry Wood chipper CH150 heavy duty • Powerful wood chipper for professional use • Automatic feeding and rpm guard (no-stress in-feed control) make chipping easier and more efficient Avant CH 150 is a powerful wood chipper, equipped with a feeding unit which draws even the most stubborn tree branches into the chipper. The unit is equipped with two feed rollers that are governed by an rpm guard on the chipping drum. The chipping drum will not seize, because when the chipping drum rpm is too low the feed rolls will stop and allow the chipping drum to gain rpm again. The CH150 is designed for professional landscapers and property maintenance companies who require a high efficiency from the chipper. R35, 635, 640 and 700 series Max. timber diameter 150 mm Feed rollers 2 pcs Chute rotation 270 ° Weight 218 126 220 313S 320S 320S+ 419 420 Very compatible 520 525LPG 528 Compatible 490 kg Product no A414031 Price £8,325.00 R28 R35 630 635 Incompatible 640 745 750 Forestry Timber trailer with loader crane Avant timber trailer with loader crane is an easy-to-use and effective way to load and transport logs. The trailer is coupled to Avant’s trailer coupling and the loader crane to the rear auxiliary hydraulics (double acting outlet required) – very easy and fast connecting and disconnecting. Timber trailer can be equipped as an option with hydraulic 4 wheel drive, powered by hydraulically operated traction rollers. This improves off-road capabilities considerably and is often necessary when driving in the forest. The rollers and their driving direction (forward-reverse) are controlled with a toggle switch from the driver’s seat. The loader crane can be equipped with a remote controlled winch. This way the logs can be winched from places that are harder to reach and the trailer doesn’t have to be moved so much. Thanks to the remote control one operator can easily work with the winch. • For do-it-yourself forest work or small scale professional logging • Strong and robust design, like on bigger timber trailers • Powerful loader crane, can be equipped with a winch • Trailer can be equipped with a hydraulic 4WD system which further improves off-road capabilities 200, 400, 500, R, 600 and 700 series Max load for trailer 1500 kg Load space lenght 2,6 m Load space 1,7 m3 Crane lift capacity 2,0 m:350 kg/ 3,2 m:250 kg Reach Installation kit for 200 series A34821 218 220 313S 320S 320S+ 419 420 Very compatible 520 525LPG 528 Compatible 3,2 m Length 3,8 m Weight (trailer+loader) 300 kg Prod. no (trailer+loader) A34818, £8,795.00 Prod. no (trailer+loader+4wd) A34819, £12,350.00 Prod. no (trailer+loader+4wd+winch) A34820, £14,900.00 R28 R35 630 635 Incompatible 640 745 750 127 Tilt adapter • Adds flexibility to work Options Avant tilt adapter is mounted between the attachment and the loader’s quick attachment plate. It enables the driver to tilt the attachment max. 12,5 degrees to both directions from the driver’s seat. The tilt adapter makes it possible to: - Make different forms to the ground with a normal bucket - Keep pallet forks level when you are driving on surfaces with gradient - Load pallets that are on uneven ground - Level ground on uneven surfaces The tilt adapter is intended mainly for non-hydraulically operated attachments, but with the optional second auxiliary hydraulics outlet in the front it is possible to mount also hydraulically driven attachments like a 4 in 1 bucket at the same time. 218 220 313S 320S 320S+ 419 420 520 Very compatible 525LPG 400, 500, R, 600 and 700 series Max. tilt +/- 12,5 deg Weight 65 kg Product no A34148 Price £785.00 528 R28 R35 Compatible 630 635 640 745 750 Incompatible Attachment control switch pack Optional extra with which electric functions of the attachment (electric throwing height adjustment on snow blower, opening of lawn mower collector lid, control of water spraying system on the broom etc.) are controlled Does not require the optional 8 function joystick on the loader, mounts on the std. boom control lever also. Consists of the control switches, wiring and a 7-pole socket that mounts on the boom next to the auxiliary hydraulics quick couplers. The electric wire of the attachment is connected to this socket. Operation of the attachment’s electric functions is very comfortable and easy, because the toggle switches are mounted on the control lever within reach of your right thumb. 218 128 220 313S 320S 320S+ 419 420 Very compatible 520 525LPG 400, 500, R, 600 and 700 series Model Attachment control switch pack 528 Compatible R28 R35 630 Product no Price A34700 £450.00 635 Incompatible 640 745 750 Adapter plate Product no Price Adapter plate Model A46529 £55.00 Adapter for 300-700 series attachments A33126 £95.00 Options 200 series Avant offers a variety of original adapter plates, which can be welded directly onto: • An attachment you have developed yourself. • An object you wish to lift securely with Avant All original Avant adapter plates will fit, which saves a lot of time consuming measuring and adjusting work from you. 300, 400, 500, R, 600 and 700 series Model 218 220 313S 320S 320S+ 419 420 520 Very compatible 525LPG 528 Product no Price Quick attach brackets, 300/400/500/600/700 A31566 £50.00 Adapter plate 10 mm, 300/400/500/600/700 A2471 £76.00 Adapter plate 20 mm, 300/400/500/600/700 A2472 £115.00 Attachment adapter 400 => 200 series A35590 £220.00 R28 R35 Compatible 630 635 313S 320S 320S+ 419 750 New With Avant and auger drive unit you can install screw piles in the ground quickly and easily. The screw pile adapter mounts on the shaft of Avant auger drive unit and fits on Ø 60 mm screw piles. The adapter can be mounted on all Avant auger drives – the correct type of the auger drive depends on torque required: how hard the ground is, and dimensions of the screw pile. 220 745 Incompatible Screw pile adapter 218 640 200, 300, 400, 500, R, 600 and 700 series Model Screw pile adapter 420 Very compatible 520 525LPG 528 Compatible R28 R35 630 Product no Price 65826 £425.00 635 Incompatible 640 745 750 129 Multi Connector System Options Multi connector Pressure-Return 65251 £90.00 Multi connector PressureTank line 65371 £90.00 Multi connector Pressure-ReturnTank line 65250 £125.00           Adapter: Multi connector to conventional quick couplings A414508 £149.00                 Multi connector Parking 65594 £34.00                                                              130         Multi Connector, On loader A34366 £295.00 Options Notes: 131 Additional products 65447 Aluminium loading ramps, pair • Length 2000 mm • Width 345 mm • For all Avant models • Max. loading hight 650 mm £465.00 Transport trailers Product no. Price 540-1120 CarGO All Plant 3.1m x 1.6m 2700Kg MTP POR 540-1130 CarGO All Plant 3.1m x 1.85m 2700Kg MTP POR 540-1320 CarGO All Plant 3.1m x 1.6m 3500Kg MTP POR 540-1320 CarGO All Plant 3.1m x 1.85m 3500Kg MTP POR Product no. CarGO Flatbed: Price 420-3000 CG9 4.0 x 2.1 3000 Kg FB, TWIN 10 POR 420-3100 CG9 4.0 x 2.1 3500 Kg FB, TWIN 13 POR Product no. 132 CarGo All Plant: CarGO Tilt-bed: Price 420-3000 CG9 4.5 x 2.1 3500 Kg TB, TWIN 13, S TP POR 420-3100 CG9 4.5 x 2.1 3500 Kg TRI 10, S TP POR Filter kits Product no: Model A46682 216 A46683 218 / 220 A44494 Multi 13 hp, Profi 11/13 hp, 313 / 313 S £31.00 A44495 Multi diesel/Power diesel/Profi diesel/314, 320, 320+ £51.00 A45855 314S, 320S, 320S+, manufactured 08/2002 - 10/2004 £47.00 A46871 314S, 320S, 320S+ manufactured 10 / 2004 - 1 / 2011 £49.00 serial numbers before XXXXX1104 A414036 320S / 320S+ valm. 1/2011-, serial numbers after XXXXX1105 £62.00 A44491 513, manufactured 2000 - 06 / 2001, serial numbers: 23663 - 24853 £78.00 A44738 513, manufactured after 06 / 2001 £63.00 A44493 Multi Plus £73.00 A44492 514, 520, 520+, manufactured 2000 - 06 / 2001 £100.00 serial numbers: 23721 - 24862 A44739 514, 520, 520+, 523+, manufactured 06 / 2001 - 08 / 2002 £84.00 serial numbers: 24865 - 25933 A45854 514, 520, 520+, 523+, manufactured 08 / 2002 - 10 / 2004 £78.00 serial numbers: 25935 - 44575 A46870 514, 520, 520+, 523+, manufactured 10/2004 - 12/2007 £80.00 A414863 419 £93.00 £115.00 £110.00 A49572 420, manufactured 09 / 2009 - 05 / 2013 520 series 2 (new model), manufactured 2008 - 05 / 2013 £80.00 A416943 420, manufactured 06 / 2013 - 520 series 2 (new model), manufactured 06 / 2013 - A414037 525 LPG, manufactured 1 / 2011 - A46112 528+, manufactured before 06 / 2001 £106.00 serial numbers: 24325 - 24841 A44740 528+ / 530+, manufactured 06 / 2001 - 08 / 2002 £90.00 serial numbers: 24852 - 25966 A45853 528+ / 530+, manufactured 08/2002-12/2007 £80.00 serial numbers: 25967-55601 A48036 528 series 2 (New model), manufactured 2008- £85.00 630 / 635, serial numbers before XXXXX0902 A 410961 630 / 635 serial numbers after XXXXX0903 £114.00 A 410784 745 / 750 £120.00 £85.00 £124.00 133 Wheels & tyres Wheel, complete (tyre + rim) Product no: Size Profile Bolt pattern 64072 4.00 x 12 3 4 x 100 63630 5.00 x 10 3 4 x 100 65412 5.00 x 10 3 6 x 100 63503 18 x 7,50-8 6 4 x 100 64164 20 x 8.00-10 6 4 x 100 64794 21 x 8.00-10 1 4 x 100 64120 23 x 8,50-12 2 4 x 100 64160 23 x 8,50-12 6 4 x 100 65046 23 x 8,50-12 2 6 x 120 65045 23 x 8,50-12 6 6 x 120 64618 23 x 10,50-12 4 4 x 100 64161 23 x 10,50-12 5 4 x 100 65048 23 x 10,50-12 4 6 x 120 65047 23 x 10,5-12 5 6 x 120 64752 26 x 12.00-12 3 4 x 100 64751 26 x 12.00-12 6 4 x 100 64931 26 x 12.00-12 3 6 x 120 64930 26 x 12.00-12 6 6 x 120 65212 26 x 12.00-12 6 10 x 140 65019 27 x 8,50-15 2 6 x 120 65414 27 x 8,50-15 2 10 x 140 65028 320/60-12, HD-wheel 4 6 x 120 65224 320/60-12, HD-wheel 4 10 x 140 65506 320/55-15 5 10 x 140 65459 320/55-15 6 10 x 140 134 Price £160.00 £140.00 £140.00 £110.00 £120.00 £130.00 £160.00 £170.00 £160.00 £170.00 £195.00 £200.00 £195.00 £200.00 £250.00 £245.00 £235.00 £230.00 £235.00 £235.00 £235.00 £280.00 £285.00 £325.00 £315.00 Tyre, without rim Product no: 64129 Size 23 x 8,50-12 Profile 2 Price £105 Price each £160.00 £170.00 £185.00 £245.00 £285.00 Price set £640.00 £680.00 £740.00 £980.00 £1,140.00 Solid Foam fill to the tyres Tyre 23x8.50-12 TR and Grass tyre (400-serie) 23x10.50-12 TR and Grass tyre (500-serie) 26x12-12 TR and Grass tyre (600-serie) 320/60-12 TR (745) 320/55-15 TR (750) Tyre tread patterns 1 2 3 4 5 6 135 Avant shop 64953 Avant overalls, adult £66 64953A Avant overalls, children £56 Practical black and green Avant overalls. Several pockets including a mobile phone pocket. 65194 Work jacket £68 High-quality green and black Avant work jacket. Material is cotton and polyester. 136 65195 Work trousers High-quality black Avant work trousers. Material is cotton and polyester. £45 65623 Winter jacket Warm and durable coat £90 65624 Winter trousers Warm and durable coat £67 64952 Beanie Warm Avant beanie with Avant logo £14 64949 Backpack High-quality backpack, with zipped pockets and side straps. £32 65625 Avant dummy BPA-Free £8 65390 £15 Avant junior DVD We have produced a DVD for the younger audience. 80 minutes. Avant shop 64944 Avant cap Stylish Avant cap. Brushed cotton. One size. £15 64947 T-shirt White T-shirt with a green print. sizes: XS-XXXL £23 65702 T-shirt Grey T-shirt for men with a green print. sizes: XS-XXXL £23 65703 T-shirt Grey T-shirt for women with a green print. sizes: XS-XXXL £23 65701 T-shirt Green T-shirt for children with a white print. sizes: 90cm-150cm £16 65388 Piquet shirt High-quality grey shirt with green stripes. 100 % cotton sizes: S-XXXL £26 65561 Avant fleece Stylish grey fleece £27 137 Notes: 138 Notes: 139 AVANT Tecno (UK) Ltd. AVANT has a policy of continuing improvement, and retains the right to change specifications without notice. Prices valid from March 1st, 2013. All prices subject to VAT and Carriage. 140 www.avant.co.uk 0913 Manor Farm, Bridgham, Norfolk, NR 16 2RX Tel (01953) 714 896 Fax (01953) 714 897 E-mail: [email protected]