Transcript
P O O L S 4 S A L ,
I N C
“We Make Summer Fun” www.pools4sale.com ** 267-808-8882 **
[email protected]
Protection For Your Pool
m
Protects Liners Cuts Heat Loss Reduces Metal Wall Corrosion Add years of life to your pool liner ! All wall foams are NOT created equal! Compare Gladon's high quality flat foam to any others and you will see the difference. Wall Foam adds insulation to your pool to keep the water warmer and save energy. Use on metal, concrete, or wood to get smooth pool walls. Do you need special lengths and widths? No problem ! Gladon does all of its own slitting and rewinding in house.
Permanent Pool Cove
Helps Prevent Corrosion Over 30 Years of Proven Performance Eliminates Liner Failures Due to Cove Washout.
Every pool needs a cove to protect the liner….. But you have a choice. You can make the cove by hand using tons of dirt, or you can use Gladon's patented Permanent Pool Cove.
All above ground pools need a cove. Read any pool manufacture's installation instructions and you will find: "The cove is a vital structural element of your pool." A cove is needed to keep the weight of the water in the pool liner from causing it to balloon out under the bottom of the pool wall. Previously, pool cove had to be hand built, in place, using tons of sand or dirt. Liner failures due to cove washout were all too common. Corrosion occurred rapidly where metal components, at the bottom of the pool, came in contact with moisture in the sand or dirt. Hand formed coves are uneven making cleaning difficult.
Above ground swimming pools should be set up on a pool pad. The pool pad provides a smooth surface for the bottom of the pool. A pool pad cushions the liner and helps protect it from objects below the pool. A pool pad is a must, if you are setting a pool up on concrete or asphalt. Our Happy Pool Bottom the finest in the industry, is made from closed cell polyethylene foam. The foam acts as an insulator, reducing heat loss to the ground. HappyBottom® may be used with the Perfect Pool Bottom® to add that luxurious soft feel to the bottom of your pool.
Extends Liner Life Reduces Heat Loss Makes Bottom Cleaning Easier High Density/Low Compression May Eliminate The Need For Sand Helps Protect Pool Liners From Punctures Great For Pool Set Up On Concrete Or Asphalt Minimizes Corrosion Of Metal Components Standard 1/4" Thick and Extra-Thick 1/2" Version
Happy Bottom Pool Pad can add years of life to a pool and its liner. Made from a special high density closed cell polyethylene foam, Happy Bottom Pool Pad cushions and protects the pool liner. Happy Bottom reduces the potential for liner failure due to punctures. It also acts as a barrier to keep corrosion causing elements in the soil away from the metal components of your pool. Happy Bottom acts as an insulator under the pool, reducing heat loss to the ground. Reduced heat loss can save energy and extend your swimming season. A smooth, easy to clean bottom and reduced indentations are just a few of the benefits of using Happy Bottom Pool Pad. Pool owners love the comfort and luxurious feel Happy Bottom provides when it is used under a pool liner.
Perfect Bottom 1. Stops Nut grass 2. Super Smooth Pool Bottom 3. Protects Pool Liner 4. Makes Bottom Cleaning Easier 5. No Footprints 6. Reduces The Need For Sand 7. Acts As A Vapor 8. Barrier Under The Liner 9.Limited 10 Year Warranty 10.Chemically Resistant To Acid and Other Chemicals Found In Soil
Finally, a new technology has been developed to improve the way above ground swimming pool bottoms are installed. PPB 4000 is a hard, flat, impervious polymer material that is placed under your pool to form a smooth bottom and protect the liner. PPB 4000 installs quickly and easily, once you have prepared the site where your pool will be set up. Rocks, stones, nut grass, and other objects in the ground below your pool can easily puncture unprotected pool liners and cause leaks. Our revolutionary bottom system will virtually eliminate these problems. PPB 4000 comes with a ten year limited warranty, even though we strongly believe it will outlast most pools. The Perfect Pool Bottom package consists of overlapping 5' wide PPB 4000 sections, precut to fit your swimming pool, packaged with just the right amount of Gladon’s patented Pool Cove. Pool Cove is a vital structural element in every above ground swimming pool. Gladon’s high quality, lightweight, pre-formed Pool Cove easily snaps into place. It eliminates the need to build a cove on site, using tons of sand or dirt. It provides professional results every time. Unlike sand or dirt coves, Gladon’s Pool Cove cannot wash out and doesn’t hold corrosion causing moisture against the metal parts at the bottom of your pool.
