Transcript
PF-504 PP-57 Series
Ikegami Advanced RF Solutions
Specifications
PF-504
Transmitter (Model Number) Frequency
Modulation Method
Output Power
3.5GHz / 5.8GHz / 7GHz / 10GHz / 12GHz
Preset Channel
STD: 4ch, MAX.11ch (Option)
1ch *Channel cassette type
QAM
64QAM / 32QAM / 16QAM / QPSK
64QAM / 32QAM / 16QAM / QPSK(Option)
OFDM
64QAM / 32QAM / 16QAM / D-QPSK / QPSK / D-BPSK / BPSK
64QAM / 32QAM / 16QAM / D-QPSK / D-BPSK / BPSK(Option)
Analog
FM (Frequency Modulation)
QAM
0.1 / 0.2 / 0.5 / 0.8 / 1.5W selectable
OFDM
0.1/ 0.2 / 0.5 / 0.8W selectable
Analog
0.1 / 0.2 / 0.5 / 0.8 / 1.0 / 5.0W selectable
HD/SD-SDI
BNC x1 (used when the built-in MPEG-2 HD/SD Encoder or the JPEG2000 HD Encoder is installed. *In case of the JPEG2000 HD Encoder, only HD-SDI available. *Embedded Audio: Max 8ch with the built-in MPEG-2 HD/SD Encoder or JPEG2000 HD Encoder. *As for PP-57/57D, connector is shared for SDI and DVB-ASI. Selectable with the switch on the front panel.
VBS (NTSC)
Input Signals
Note: Max output power is 0.5W for 12GHz Band model
0.2W at 10-12GHZ (PP-57D)
0.2W(PP-57/57D)
Note: Max output power is 0.1W (PP-57/57D) for 10GHz / 12GHz Band model
BNC x1 (To be when the built-in MPEG-2 SD Encoder is installed) BNC x4 (HD:8ch / SD:4ch)
Analog Audio
XLR-3 x4 (A1, A2, A3, A4) (0dBm: 600Ω, balanced) *In case of FM mode : A1, A2, OW.
XLR-3 x2 2ch Analog (0dBm: 600Ω, balanced)
BNC x1 (200-880mVp-p/75Ω, unbalanced)
BNC x1(Connector is shared with HD/SD-SDI Input. (200-880mVp-p/75Ω, unbalanced)
PF-504 ：Line rate 270Mbaud, 75Ω, TS 188/204 byte (incl. 16-byte dummy), Data Packet/Data Burst supported, Equipped Rate converter function. PP-57/57D：Line rate 270Mbaud, 75Ω, TS 204 byte (incl. 16-byte dummy), Data Packet/Data Burst supported, Equipped Rate converter function.
AUX CH
D-SUB 9P Male (Option) DATA 1ch (RS-232C level, 1200bps-19200bps) (excl. DBPSK mode)
DS3 (Option)
BNC x1
VBS
BNC x1 (Loop-through)
HD/SD-SDI
BNC x1 (Active-through)
ENC (DVB-ASI)
BNC x1 (188/204 byte,data packet and data burst supported)
REF CLK
BNC x1
Word CLK
BNC x1
Bit rate
Standard 5 rate + User set 6 rate
Control Cable Length
STD-Max.300m (5D-2W cable), 400m (Option)
Power
0.3W (PP-57D)
AES
DVB-ASI (TS)
Output Signals
PP-57 / 57D
Band
Requirement
AC110 or 220 ±15%, 50/60Hz or DC+12V(+10.8V ∼ +15.2V) *AC110 ∼ 220 ±15% both type is available (Option).
DC+12V(+10.8V ∼ +16.8V)
Consumption
Less than 250W (incl. RF Unit)
Less than 60W (at DC+12V)
RF Unit: Less than 7kg, Control Unit: Less than 6.5kg
Less than 2.5kg
Dimensions (excl. outshoot)
RF Unit: W180 x H100 x D350mm Control Unit: W180 x H120 x D390mm
W140 x H70 x D210mm
STD: 4ch, MAX.11ch (Option)
DEC (DVB-ASI)
BNC x1 (200-880mVp-p/75Ω, unbalanced)
GENLOCK (BB)
BNC x1
VBS (NTSC)
BNC x2
HD/SD-SDI
BNC x2 (Embedded Audio)
Analog Audio DVB-ASI (TS) AUX CH IF MON (130MHz) or DS3 (Option) MONITOR OUT** (NTSC)
Bit rate
BNC x4 (HD:8ch / SD:4ch) XLR-3 x4 (A1, A2, A3, A4) (0dBm: 600Ω, balanced) *In case of FM mode : A1, A2, OW. BNC x2 (800mVp-p/75Ω, unbalanced)
PF-504: Line rate 270Mbaud, 75Ω, TS 188/204 byte (incl. 16-byte dummy), Data Packet/Data Burst supported. PP-57/57D: Line rate 270Mbaud, 75Ω, TS 204 byte (incl. 16-byte dummy), Data Packet/Data Burst supported.
D-SUB 9P Male (Option), DATA 1ch (RS-232C level, 1200bps-19200bps) (excl. DBPSK mode) BNC x1 (-10dBm / 50Ω, unbalanced) *at Digital modulation (QAM/OFDM) only. If the connector is used for optional DS-3 output, IF MON function will not be available.
PF-504 (Transmitter)
BNC x1 (Receiving Support function)
PF-504 (Receiver)
Auto / Manual (Standard 5 rate + User set 6 rate) Requirement
Power
PP-57: OFDM model PP-57D:QAM/OFDM Dual Mode model
3dB or better at 3.5GHz ∼ 7GHz Band, 4dB or better at 10GHz ∼ 12GHz Band
AES
Output Signals
Compact Digital Microwave Transmitter
3.5GHz / 5.8GHz / 7GHz / 10GHz / 12GHz
Preset Channel
NF Input Signals
PP-57 Series
PF-504
(Model Number)
Band
Frequency
Digital/Analog 3-mode Microwave Link
Standard 6 rate
Weight
Receiver
PF-504
Consumption
Weight Dimensions (excl. outshoot)
AC110 or 220 ±15%, 50/60Hz or DC+12V(+10.8V ∼ +15.2V),
*AC110 ∼ 220 ±15% both type is available (Option).
Less than 180W (incl. RF Unit) RF Unit: 6kg, Control Unit: 6.5kg RF Unit: W180 x H100 x D350mm Control Unit: W180 x H120 x D390mm **This function is jointly developed by TBS (Tokyo Broadcasting System,Inc.) and Ikegami.
SH78A085-HA2 Printed in Japan ISO 9001
ISO 14001
Certified JAQ-0773
Certified JAQ-EM3888
Ikegami Advanced RF Solutions
HDK-79EX Ⅲ +PP-57
PF-504 Digital/Analog 3-mode Microwave Link The portable PF-504 Microwave Link features digital and analog modulation in the 3.5/5.8/7.0/10/12GHz bands. The best modulation is selectable according to type of operation among single carrier QAM, QAM-OFDM and analog (FM) modes.
Up to 3 modes of modulation, single carrier QAM, QAM-OFDM, and Analog (FM) are available.
Compact Digital Microwave Transmitter
2 transmitter types are availabe. The PP-57 is the OFDM modulation model. OFDM modulation maintains robust transmission even in multi-path conditions. The PP-57D is the single carrier QAM/ OFDM type. Available with either MPEG-2 Encoder or JPEG2000 Encoder. ･ MPEG-2 HD/SD Encoder : HD-SDI (SMPTE292M) / SD-SDI (SMPTE259M) ･ JPEG2000 Encoder : HD-SDI (SMPTE292M) Input signal available with HD-SDI / DVB-ASI (TS). Rate converter available in the DVB-ASI (TS) input mode.
TX RF Unit
Direct input of HD-SDI or SD-SDI signal is transmitted using built-in an HD/SD codec board in the TX/RX control units. An integrated NTSC to SDI converter, and an analog (4ch) audio to AES converter are included in the TX control unit. Also, SDI to NTSC and AES to analog audio (4-ch) converters are integrated in the RX control unit. An integrated rate-converter allows for DVB-ASI input, set to a desired rate. Modulation Mode, Video format, and codec parameters can be set on the control panel.
PP-57 Series
TX Control Unit
A codec board (Encoder / Decoder) can be built-in, with choice of 2 types according to the application: IN/OUT: HD-SDI (SMPTE-292M) or SD-SDI (SMPTE259M) ･ MPEG HD/SD codec board *Video delay approx. 15 frame (approx. 500ms) IN/OUT: HD-SDI (SMPTE292M) only ･ JPEG2000 HD codec board *Video delay 1frame (approx. 33ms) or 2 frame Alarm (LED) will light or blink when trouble is detected in the system. Beep sound is also available when trouble occurs on the control unit, set by Menu. Up to 80 error logs are stored. Down converter (HDTV to SDTV) function available on the RX control unit (Option). When an HD-SDI signal is input, either 4:3 Letter Box or 16:9 Squeeze can be selected. Self-contained operation for RF units is possible with the built-in analog FM board (Option). RS-232C (Max.19.2kbps) signal can be transmitted in OFDM mode (Option). DS3 interface available (option). This is an alternate function to the I/F MON function.
Mounting the PP-57/57D on an ENG camera with HD-SDI realizes an HD Wireless Camera System. The system transmits about 3,000m in OFDM, 24Mbps bit rate, with an omni -directional TX antenna and 0.3φm parabolic RX antenna.
PP-57
HDK-79EX Ⅲ +PP-57
The transmission distance is calculated on the following conditions. (at 16QAM-OFDM, 1/2, approx. 24Mbps, 7GHz Band without any obstacles). Using a φ0.6m parabolic antenna, the transmission distance shall be twice
PP-57/57D
more than when using φ0.3m parabolic antenna.
Battery
BER, MARGIN, and MER levels can be displayed with LED/Meter on both the RX RF and Control units. Thus, the operator can realize whether the necessary C/N ratio is sufficient or not on the RX units.
Transmission Distance: 0.2W, Omni-Directional ⇒ φ0.3m approx. 1∼3km 0.2W, Omni-Directional ⇒ Flat approx. 0.3∼1km 0.2W, Omni-Directional ⇒ Omni-Directional approx. 100∼300m Flat Antenna etc. Two-man style operation
SHF Cable
PP-57/57D Battery
Receiver Side
Battery
Video･Audio connection cable Unipod
Rain Cover / Sunshade Cover Transmission Distance: 0.2W, Flat ⇒ φ0.3m approx. 6km Transmission Distance: 0.2W, φ0.3m ⇒ φ0.3m approx. 20km 0.2W, φ0.15m ⇒ φ0.3m approx. 10km
PP-57/57D Self-Contained Operation
→ Video, ↑ AC / DC IN Audio 1･2
Tripod Video, Audio 1･2
RX Control Unit *This function is jointly developed by TBS (Tokyo Broadcasting System,Inc.) and Ikegami.
DC+12V
Tripod / Pole
Control Cable (5D-2W)
PP-57/57D
RX RF Unit
Two-man Style
PP-57/57D System Applications Omni-Directional Antenna
Additionally, the following receiving status levels can be output from the RX control unit to an external picture monitor: ・BL ･ BER ･ MARGIN ･ MER ･ Delayed profile ･ Constellation / Spectrum analyzer (selectable)
One-man Style
Photo: courtesy of tv asahi corporation (Japan)
One-man style operation
Receiving Assistance Functions
Slot-in channel cassette
PP-57 (w/attachment)
PF-504 Digital/Analog 3-mode Microwave Link The portable PF-504 Microwave Link features digital and analog modulation in the 3.5/5.8/7.0/10/12GHz bands. The best modulation is selectable according to type of operation among single carrier QAM, QAM-OFDM and analog (FM) modes.
Up to 3 modes of modulation, single carrier QAM, QAM-OFDM, and Analog (FM) are available.
Compact Digital Microwave Transmitter
2 transmitter types are availabe. The PP-57 is the OFDM modulation model. OFDM modulation maintains robust transmission even in multi-path conditions. The PP-57D is the single carrier QAM/ OFDM type. Available with either MPEG-2 Encoder or JPEG2000 Encoder. ･ MPEG-2 HD/SD Encoder : HD-SDI (SMPTE292M) / SD-SDI (SMPTE259M) ･ JPEG2000 Encoder : HD-SDI (SMPTE292M) Input signal available with HD-SDI / DVB-ASI (TS). Rate converter available in the DVB-ASI (TS) input mode.
TX RF Unit
Direct input of HD-SDI or SD-SDI signal is transmitted using built-in an HD/SD codec board in the TX/RX control units. An integrated NTSC to SDI converter, and an analog (4ch) audio to AES converter are included in the TX control unit. Also, SDI to NTSC and AES to analog audio (4-ch) converters are integrated in the RX control unit. An integrated rate-converter allows for DVB-ASI input, set to a desired rate. Modulation Mode, Video format, and codec parameters can be set on the control panel.
PP-57 Series
TX Control Unit
A codec board (Encoder / Decoder) can be built-in, with choice of 2 types according to the application: IN/OUT: HD-SDI (SMPTE-292M) or SD-SDI (SMPTE259M) ･ MPEG HD/SD codec board *Video delay approx. 15 frame (approx. 500ms) IN/OUT: HD-SDI (SMPTE292M) only ･ JPEG2000 HD codec board *Video delay 1frame (approx. 33ms) or 2 frame Alarm (LED) will light or blink when trouble is detected in the system. Beep sound is also available when trouble occurs on the control unit, set by Menu. Up to 80 error logs are stored. Down converter (HDTV to SDTV) function available on the RX control unit (Option). When an HD-SDI signal is input, either 4:3 Letter Box or 16:9 Squeeze can be selected. Self-contained operation for RF units is possible with the built-in analog FM board (Option). RS-232C (Max.19.2kbps) signal can be transmitted in OFDM mode (Option). DS3 interface available (option). This is an alternate function to the I/F MON function.
Mounting the PP-57/57D on an ENG camera with HD-SDI realizes an HD Wireless Camera System. The system transmits about 3,000m in OFDM, 24Mbps bit rate, with an omni -directional TX antenna and 0.3φm parabolic RX antenna.
PP-57
HDK-79EX Ⅲ +PP-57
The transmission distance is calculated on the following conditions. (at 16QAM-OFDM, 1/2, approx. 24Mbps, 7GHz Band without any obstacles). Using a φ0.6m parabolic antenna, the transmission distance shall be twice
PP-57/57D
more than when using φ0.3m parabolic antenna.
Battery
BER, MARGIN, and MER levels can be displayed with LED/Meter on both the RX RF and Control units. Thus, the operator can realize whether the necessary C/N ratio is sufficient or not on the RX units.
Transmission Distance: 0.2W, Omni-Directional ⇒ φ0.3m approx. 1∼3km 0.2W, Omni-Directional ⇒ Flat approx. 0.3∼1km 0.2W, Omni-Directional ⇒ Omni-Directional approx. 100∼300m Flat Antenna etc. Two-man style operation
SHF Cable
PP-57/57D Battery
Receiver Side
Battery
Video･Audio connection cable Unipod
Rain Cover / Sunshade Cover Transmission Distance: 0.2W, Flat ⇒ φ0.3m approx. 6km Transmission Distance: 0.2W, φ0.3m ⇒ φ0.3m approx. 20km 0.2W, φ0.15m ⇒ φ0.3m approx. 10km
PP-57/57D Self-Contained Operation
→ Video, ↑ AC / DC IN Audio 1･2
Tripod Video, Audio 1･2
RX Control Unit *This function is jointly developed by TBS (Tokyo Broadcasting System,Inc.) and Ikegami.
DC+12V
Tripod / Pole
Control Cable (5D-2W)
PP-57/57D
RX RF Unit
Two-man Style
PP-57/57D System Applications Omni-Directional Antenna
Additionally, the following receiving status levels can be output from the RX control unit to an external picture monitor: ・BL ･ BER ･ MARGIN ･ MER ･ Delayed profile ･ Constellation / Spectrum analyzer (selectable)
One-man Style
Photo: courtesy of tv asahi corporation (Japan)
One-man style operation
Receiving Assistance Functions
Slot-in channel cassette
PP-57 (w/attachment)
PF-504 PP-57 Series
Ikegami Advanced RF Solutions
Specifications
PF-504
Transmitter (Model Number) Frequency
Modulation Method
Output Power
3.5GHz / 5.8GHz / 7GHz / 10GHz / 12GHz
Preset Channel
STD: 4ch, MAX.11ch (Option)
1ch *Channel cassette type
QAM
64QAM / 32QAM / 16QAM / QPSK
64QAM / 32QAM / 16QAM / QPSK(Option)
OFDM
64QAM / 32QAM / 16QAM / D-QPSK / QPSK / D-BPSK / BPSK
64QAM / 32QAM / 16QAM / D-QPSK / D-BPSK / BPSK(Option)
Analog
FM (Frequency Modulation)
QAM
0.1 / 0.2 / 0.5 / 0.8 / 1.5W selectable
OFDM
0.1/ 0.2 / 0.5 / 0.8W selectable
Analog
0.1 / 0.2 / 0.5 / 0.8 / 1.0 / 5.0W selectable
HD/SD-SDI
BNC x1 (used when the built-in MPEG-2 HD/SD Encoder or the JPEG2000 HD Encoder is installed. *In case of the JPEG2000 HD Encoder, only HD-SDI available. *Embedded Audio: Max 8ch with the built-in MPEG-2 HD/SD Encoder or JPEG2000 HD Encoder. *As for PP-57/57D, connector is shared for SDI and DVB-ASI. Selectable with the switch on the front panel.
VBS (NTSC)
Input Signals
Note: Max output power is 0.5W for 12GHz Band model
0.2W at 10-12GHZ (PP-57D)
0.2W(PP-57/57D)
Note: Max output power is 0.1W (PP-57/57D) for 10GHz / 12GHz Band model
BNC x1 (To be when the built-in MPEG-2 SD Encoder is installed) BNC x4 (HD:8ch / SD:4ch)
Analog Audio
XLR-3 x4 (A1, A2, A3, A4) (0dBm: 600Ω, balanced) *In case of FM mode : A1, A2, OW.
XLR-3 x2 2ch Analog (0dBm: 600Ω, balanced)
BNC x1 (200-880mVp-p/75Ω, unbalanced)
BNC x1(Connector is shared with HD/SD-SDI Input. (200-880mVp-p/75Ω, unbalanced)
PF-504 ：Line rate 270Mbaud, 75Ω, TS 188/204 byte (incl. 16-byte dummy), Data Packet/Data Burst supported, Equipped Rate converter function. PP-57/57D：Line rate 270Mbaud, 75Ω, TS 204 byte (incl. 16-byte dummy), Data Packet/Data Burst supported, Equipped Rate converter function.
AUX CH
D-SUB 9P Male (Option) DATA 1ch (RS-232C level, 1200bps-19200bps) (excl. DBPSK mode)
DS3 (Option)
BNC x1
VBS
BNC x1 (Loop-through)
HD/SD-SDI
BNC x1 (Active-through)
ENC (DVB-ASI)
BNC x1 (188/204 byte,data packet and data burst supported)
REF CLK
BNC x1
Word CLK
BNC x1
Bit rate
Standard 5 rate + User set 6 rate
Control Cable Length
STD-Max.300m (5D-2W cable), 400m (Option)
Power
0.3W (PP-57D)
AES
DVB-ASI (TS)
Output Signals
PP-57 / 57D
Band
Requirement
AC110 or 220 ±15%, 50/60Hz or DC+12V(+10.8V ∼ +15.2V) *AC110 ∼ 220 ±15% both type is available (Option).
DC+12V(+10.8V ∼ +16.8V)
Consumption
Less than 250W (incl. RF Unit)
Less than 60W (at DC+12V)
RF Unit: Less than 7kg, Control Unit: Less than 6.5kg
Less than 2.5kg
Dimensions (excl. outshoot)
RF Unit: W180 x H100 x D350mm Control Unit: W180 x H120 x D390mm
W140 x H70 x D210mm
STD: 4ch, MAX.11ch (Option)
DEC (DVB-ASI)
BNC x1 (200-880mVp-p/75Ω, unbalanced)
GENLOCK (BB)
BNC x1
VBS (NTSC)
BNC x2
HD/SD-SDI
BNC x2 (Embedded Audio)
Analog Audio DVB-ASI (TS) AUX CH IF MON (130MHz) or DS3 (Option) MONITOR OUT** (NTSC)
Bit rate
BNC x4 (HD:8ch / SD:4ch) XLR-3 x4 (A1, A2, A3, A4) (0dBm: 600Ω, balanced) *In case of FM mode : A1, A2, OW. BNC x2 (800mVp-p/75Ω, unbalanced)
PF-504: Line rate 270Mbaud, 75Ω, TS 188/204 byte (incl. 16-byte dummy), Data Packet/Data Burst supported. PP-57/57D: Line rate 270Mbaud, 75Ω, TS 204 byte (incl. 16-byte dummy), Data Packet/Data Burst supported.
D-SUB 9P Male (Option), DATA 1ch (RS-232C level, 1200bps-19200bps) (excl. DBPSK mode) BNC x1 (-10dBm / 50Ω, unbalanced) *at Digital modulation (QAM/OFDM) only. If the connector is used for optional DS-3 output, IF MON function will not be available.
PF-504 (Transmitter)
BNC x1 (Receiving Support function)
PF-504 (Receiver)
Auto / Manual (Standard 5 rate + User set 6 rate) Requirement
Power
PP-57: OFDM model PP-57D:QAM/OFDM Dual Mode model
3dB or better at 3.5GHz ∼ 7GHz Band, 4dB or better at 10GHz ∼ 12GHz Band
AES
Output Signals
Compact Digital Microwave Transmitter
3.5GHz / 5.8GHz / 7GHz / 10GHz / 12GHz
Preset Channel
NF Input Signals
PP-57 Series
PF-504
(Model Number)
Band
Frequency
Digital/Analog 3-mode Microwave Link
Standard 6 rate
Weight
Receiver
PF-504
Consumption
Weight Dimensions (excl. outshoot)
AC110 or 220 ±15%, 50/60Hz or DC+12V(+10.8V ∼ +15.2V),
*AC110 ∼ 220 ±15% both type is available (Option).
Less than 180W (incl. RF Unit) RF Unit: 6kg, Control Unit: 6.5kg RF Unit: W180 x H100 x D350mm Control Unit: W180 x H120 x D390mm **This function is jointly developed by TBS (Tokyo Broadcasting System,Inc.) and Ikegami.
SH78A085-HA2 Printed in Japan ISO 9001
ISO 14001
Certified JAQ-0773
Certified JAQ-EM3888
Ikegami Advanced RF Solutions
HDK-79EX Ⅲ +PP-57
