Transcript
2006
IP Ready™ Network Series - Pressurized FusionDome™
PFDW75C(2/12)N PRODUCT HIGHLIGHTS • Accepts Videolarm or other manufacturer’s unitized camera systems and network cameras • Available as an S-View™ model with unitized PTZ camera • Pressurized to 7 psi • Schrader valve, and pressure relief valve • Heater/blower standard • Clear or tinted dome (1 F stop light reduction) • IP67, designed to meet NEMA 4X for water ingress • Operating Temperature -50° F to +120° F • Dimensions: Housing Height - 12.5” (1.5” pipe thread) Housing Diameter - 11.5” Dome - 7”
PRODUCT FEATURES
• Pendant Mount standard; Wall Mount available (1½” pipe thread)
PFDW75C(2/12)N Pressurized FusionDome™
• Thermostatically controlled 12Vdc or 24Vac heater and surge protection
PRODUCT DESCRIPTION The PFDW75 outdoor 7” FusionDome™ offers versatility and camera protection in a compact size, and pressurization. Pressurization eliminates the effects of moisture, dirt, and pollution on valuable camera equipment. Supports many analog and network cameras. A heater and blower are standard. 24Vac input.
• Optically clear and durable polycarbonate lower dome
• Durable engineered plastic top, 945VA UV protected • Universal mounting plate to accept IP network camera systems • Accepts one IP Network PTZ camera
OPTIONAL COMPONENTS AND ACCESSORIES:
PRM30G
CA15
WM20G
PS2496N
ACA2
WM30G
Aluminum parapet mount bracket with 20” extension, includes 1½” NPT
Ceiling mount adapter, with junction box, includes 1½” NPT
Aluminum gooseneck wall bracket for all SuperDome™ and FusionDome™ housings, includes 1½” NPT
NEMA 4x rated outdoor plastic enclosure, 115Vac input, 24Vac output: 1 Camera output - 1.1A 1 Heater output - 4A (96vA)
Aluminum corner mount bracket with female inserts
Aluminum parapet mount bracket, includes 1½” NPT
APM3 Aluminum pole mount bracket with female inserts
MODELS: Pressurized FusionDome™ 7”
PFDW75C2N
PFDW75C12N
PB24 Rugged cast aluminum power box with 84vA and 24vA power supply
FusionDome™ MODEL NUMBER SYSTEM:
Heater/Blower IP Ready™
PTZ
24Vac
√
√
√
√
√
12Vdc
Wall Mount
√
√
√
P
F
D
Pressurized Fusion Dome
7
5
C
2
Dome with extended trim ring
Clear Dome
24Vac Input
7 7” Dome
T Tinted Dome
12 12Vdc Input
N IP Network Ready
IP Ready™ Series - Pressurized FusionDome™
PFDW75C(2/12)N 1.84 [ 46.8 ]
Mechanical Specifications Size: (Product/shipping)
14.4” x 11.2” x 11.2” 366 x 285 x 285mm (h*w*d)
Weight: (Product/shipping)
11 lbs/ 5.0kg
Construction
Top:
.125”/3mm engineered plastic
Dome:
Polycarbonate
Mount Bracket:
Cast aluminum
10.62 [ 269.8 ] 14.35 [ 364.6 ]
11.11 [ 282.2 ]
Environmental Specifications Operating Temperature:
–50° F to + 120° F (–50° C to + 50° C)
Heater activates at
60 °F (15° C)
Heater deactivates at
80°F (27° C)
Effective Projected Area (EPA):
Approx. 0.12 m^2
Operating Humidity:
Up to 100%
Electrical Specifications Power: Dome 24Vac model: Dome 12Vdc model:
7.52 [ 191.1]
24Vac 80watts (H/B 52 watts) 12Vdc, 50 watts (includes 20 watts for heater)
Shipping Specifications Model PFDW75
Shipping Weight 13 lbs
Box Dimensions 17 x 14 x 17
PFDW75C(2/12)N Pressurized FusionDome™ Series CERTIFICATIONS AND RATINGS
ARCHITECTURAL/ENGINEERING SPECIFICATIONS The outdoor pressurized dome camera housing shall be a model PFDW75 or equivalent. The housing shall be designed to accept many analog and network cameras. The housing shall be capable of withstanding a total of 7 psi (48 Kpa) of nitrogen gas injected through a Schraeder valve located on top of the machined stainless steel plate. A pressure relief valve located across from the Schraeder valve will provide an escape for pressure exceeding 7 psi (48 Kpa). Two (2) o-ring seals shall be included, 3.5mm x 235mm (inner diameter) and 3.5mm x 114.3mm (inner diameter). A 10-pin hermetically sealed connector, located at the top of the pressurized housing shall provide power, video and control functions. The housing shall be constructed of 3mm durable engineered plastic, UV with a UL flame rating of 945VA. The lower dome portion shall be constructed of distortion-free polycarbonate. The dome shall be held in place with minimum of (9) fasteners, and a safety cable shall be provided to hold the dome while servicing. Access to the enclosure shall be from below with (9) captive fasteners used to press the dome against a sealing o-ring. A twist-off feature shall allow for the final removal of the dome. The housing shall come standard with pendant mount. A wall mount bracket, Videolarm model WM20G is included. The housing shall include a camera mounting bracket that integrates a heater and blower. The blower shall draw 1.4W continuous power. The 50W heater shall turn on at 60°F (15°C) and turn off at 80°F (27°C). The housing shall support a temperature range of –50°F to 120°F (–50°C to 50C°). The unit shall have a weight not to exceed 5Kg (without camera) and dimensions of 14.7” x 11.2” x 11.2” (366 x 285 x 285mm). For models that support network cameras the input voltage is 24Vac and the housing shall include 24Vac to 12Vdc power supply for the camera.
