Phantom V341

Transcript

Phantom v341 Phantom v341 Datasheet Mechanical Drawing Sensor Spectral Response 1 / 10 Phantom v341 {tab= Description} Phantom v341 - 4 megapixel imager 3 gigapixel/second throughput 10-800 frames-per-second (fps) at full resolution 1 μs minimum exposure CineMag compatible Range ready The Phantom v341 digital high-speed video camera provides a 4 megapixel 35mm format sensor and almost 3 gigapixels/second throughput. That means full-resolution frame rates of 2 / 10 Phantom v341 800 frames-per-second (fps). Shutter speeds down to 1 microsecond and a global electronic shutter allow for crisp, sharp images with little or no image blur or motion artifacts. Take the wide view with our custom-designed 2560 x 1600 pixel CMOS sensor. The aspect ratio of the Phantom v341 allows you to keep moving targets in-frame longer and see more of the event you are recording. This "range ready" camera has dual power inputs to protect your data in case of power failure (via battery backup), timecode in/out (IRIG or SMPTE), Range Data input, and sports a new reflective color for better temperature stability when used outdoors. Add convenience features like an Internal Mechanical Shutter, Image-Based Auto-Trigger, optional On-Camera Controls, and a CineMag interface, and you have the ideal camera for range applications. Its small size and light weight also makes it ideal for tracking mount applications.. {tab= Videos} Note: The high speed movies are all taken with this camera. They have been greatly reduced in resolution and compressed in size so we can show them to you on the web. Movie quality directly from the camera is superior to what you will see here. Working right now on some new material... Make sure to visit our Channel {tab= Specifications }       Resolution/Speed (fps)      2560 x 1600 800 2048 x 1600 980 2048 x 1024 1,520 3 / 10 Phantom v341 1920 x 1080 1280 x 1024 1280 x 800 1280 x 720 800 x 600 640 x 480 512 x 512 512 x 384 256 x 256 256 x 128 256 x 64 256 x 8 1,440 2,250 2,870 4,510 11,000 6,880 8,390 10,900 22,100 38,700 61,800 129,500 Short Description - The Phantom v341 provides a 4 megapixel sensor with almost 3 gigapixel/second throughput. Tha Throughput/Speed - Almost 3 Gpx/second Max speed at full resolution of 2560 x 1600 is 800 fps to RAM and 195 fps to CineMag Max speed at reduced resolution of 256 x 8 is 130,000 fps to RAM Min frame rate of 10 fps Sensor Specifications - 2560 x 1600 pixels 10 µm pixel size 25.6 mm x 16.0 mm 12-bit depth ISO 4000 mono, 1000 color TE cooled CAR in 256 x 8 increments Fill factor: 70% Dynamic range: 55 dB Read out noise at 45°C: 21e 4 / 10 Phantom v341 - QE at 530nm: 57% Full well capacity: 11500e Exposure - 1 us minimum exposure Global electronic shutter Extreme Dynamic Range (EDR) Auto Exposure Shutter Off mode for PIV Memory - 8 GB, 16 GB and 32 GB high-speed internal RAM CineMag compatible (128 GB, 256 GB, 512 GB) Record Times - 7.4 seconds at maximum frame rate, maximum bit depth, largest resolution and into maximum inte Special Features - Segment memory for up to 63 cines in multi-cine mode Continuous recording Frame rate profile Memory gate Event marking Frame timestamp (IRIG or SMPTE) IRIG in/out (modulated and unmodulated) Shutter off mode for PIV exposure 5 / 10 Phantom v341 - 2.5 µs straddle time Burst mode Standard internal mechanical shutter for automatic/remote Current Session Reference (CSR) Standard Image-Based Auto-Trigger (IBAT) Two 12 VDC, 1.5 A auxiliary power ports Secondary IP address Field-based firmware upgrade capable Triggering - Programmable trigger location (pre/post trigger recording) Image-Based Auto-Trigger optional Trigger from software Hardware trigger BNC Timing & Synchronization - 20 ns timing accuracy Frame synchronization to internal or external clock (FSYNC) IRIG in/out (modulated or unmodulated) SMPTE timecode at support frame rates Ready output Strobe output Genlock Signaling - Dedicated FSYNC, Trigger, Genlock, Timecode In and Timecode Out (SMPTE & IRIG) BNCs on c Range Data input on camera body (Fischer) Capture cable with Ready, Strobe, IBAT-Trigger, Pre-Trigger, Analog Video 6 / 10 Phantom v341 Ethernet Connection - Gb Ethernet for both control and data 10 Gb Ethernet via CineStream X2SR Camera Control - Optional On-Camera Controls (OCC) Phantom Camera Control (PCC) Remote Control Unit (RCU), connects to Remote port Phantom Application (legacy) SDK available Video Out - Analog video (NTSC or PAL) available on Capture Cable Two identical 4:2:2 HD-SDI ports on camera Component viewfinder port Lensing - Nikon F-mount standard Canon EOS mount optional PL-mount optional C-mount optional (lens not included) Video Processing 7 / 10 Phantom v341 - Brightness Contrast Gamma Saturation Hue White Balance Sensitivity Image flip and rotate Apply filters Data Acquisition - SAM-3 Motion Analysis - Basic measurements via Phantom Application: Distance Speed Acceleration Angles and Angular Speed Compatible with 3rd party solutions Supported File Formats - Cine, Cine Compressed, Cine RAW, AVI, Multipage TIFF, MXF PAL, MXF NTSC, QuickTime, Win Power - 100 - 240 VAC, 120 Watt power supply included 8 / 10 Phantom v341 - There are two DC inputs on the camera back panel for hot-swapping power or providing battery ba Mechanical Specifications - Size (without lens, CineMag or handle): 11.5 x 5.5 x 5.0 inches (L x W x H); 29.2 x 14 x 12.7 cm Weight (without lens or CineMag): 11.75 lb; 5.33 kg Environmental Specifications - Temperature and Humidity: 0°C - 40°C @ 8% to 80% RH Shock: 30G, half sine wave, 11 ms, 10 times all axes (without CineMag or lens) Vibration: 25G, 5-500 Hz, all axes without CineMag API’s - Phantom SDK LabView MatLab Ships Standard With - Power supply Ethernet cable Phantom PCC software Getting Started Guide Image-Based Auto-Trigger Internal Mechanical Shutter 9 / 10 Phantom v341 Options - CineMag interface Canon EOS lens mount PL-mount On-camera controls Popular Accessories - CineMag CineStation RCU CineStream Break-out-Box (IRIG-in, IRIG-out, NTSC/PAL Video, Trigger, Event, Strobe, A-Sync, Pre-Trigger/M {tab= More Photos} {gallery}VRI/v341{/gallery} {tab= Workflow} Workflow with the Phantom Cameras (spanish) {/tabs} 10 / 10