Preview only show first 10 pages with watermark. For full document please download

Philips | 6915030ph | Philips 6915031pu User Manual

   EMBED

Share

Transcript

User Manual LivingColors Mini Getting started with your LivingColors Unpacking and Installing If you unpack a LivingColors, you only need to plug the cable into the back of the product, connect it to the power system and start the experience! = + + Step 1: Place your LivingColors in a selected location on a flat and stable surface and direct it to the wall. Step 2: Plug the cable into the back of the product. Step 3: Plug your LivingColors into the power system. Basic functionality Turn the LivingColors “On” or “Off”: Your LivingColors can be turned “On” and “Off ” by using the “I”- and “0”-button on the back of the product. If you turn the LivingColors “Off ”, it will remember your last setting for the next time you use it. Colour selection: To let your LivingColors change to whatever colour you like, simply select the colour on the colour circle by touching it. If you sweep around the colour circle with your finger (without taking it off) you will be able to fine-tune your selected colour and get the full range of 256 different colour options. Extended functionality Automatic Colour Change Mode: You can also let your LivingColors change colours automatically. Hold the “I”-button on the back of the product for 5 seconds. The Automatic Colour Change Mode will now start looping through the colours. 5 sec = To exit the Automatic Colour Change Mode, simply switch off the LivingColors using the “0”-button. Then use the “I”-button to witch it on again. The Automatic Colour Change Mode is now stopped. = Problem solving Reset the luminaire by unplugging it from the power network. Wait for 30 sec and plug it back in.