Transcript
DVDR3320VR
QUICK USE GUIDE
SGP/SL/0512_05
English
ANTENNA/ CABLE SIGNAL DVD
TV/VIDEO
1
VCR OPEN/CLOSE
RETURN
DISPLAY
LIST/DISC
SYSTEM
MENU
MENU
OK
3
2
OK PLAY
STOP
2
D.DUBBING
REW
THUMBNAIL CHAPTER
REPEAT
TITLE
SEARCH
MARKER
PAUSE/STEP
FWD
RECORD
TIMER
REC MODE
AUDIO
ZOOM
3
CLEAR SHOWVIEW
VIDEOPLUS +
AERIAL
STANDBY ON
EJECT
OPEN/CLOSE
OPEN
VCR DVD
DIRECT DUBBING
DVD VCR
SOURCE
CHANNEL
RECORD
PAUSE
STOP
REW
PLAY
F.FWD
DVD
VCR
1
RF.OUT
DVD recorder back panel
4
1 1 2 3 4
Connect DVD recorder
Remove the antenna cable plug from your TV (or Satellite Receiver/Cable Box). Connect it to the AERIAL input socket at the back of the DVD recorder. Use the supplied antenna cable to connect the DVD recorder’s RF.OUT output socket to the antenna input socket at the back of your TV set. Use the supplied scart cable to connect the DVD recorder’s EURO AV1 AUDIO/VIDEO socket to the SCART socket at the back of your TV set.
3 1 2 3
●
2
Prepare the remote control
Press STANDBY-ON 2 on the DVD recorder to switch it on. Switch on the TV set and select the correct video in channel. NO PICTURE! Press the CHANNEL 3 4 button on the TV to select the correct video in channel, for example, 'EXT', '0', or 'AV'.
Connect the power cable from the DVD recorder’s ~ MAINS to the power supply.
Helpful Hints: If your TV does not have the above-mentioned connectors, please refer to the user manual for more information on others possible connection to your TV set.
Start first installation
Press SYSTEM MENU to access the setup menu. Press 3 4 to select an item in the menu. Press 2 to access the next level options. Press 1 to go back previous level options. When you complete, press OK to confirm your selections and press SYSTEM MENU to exit. Channel auto search, In {GENERAL} select {Auto Programming}. Press 2 to start automatic TV channel search. Once the TV channel search complete, the total number of channels will be saved in the tuner’s memory.
●
Clock set, In {GENERAL} select {Clock Set}. Press OK to confirm the time and clock setting. Press 3 4 to change the first digit and press 1 2 to go to the previous or next digit field. Once complete, press OK to confirm.
3 1 2
The DVD recorder is ready for use! See next page for basic recording and playback.
... cont. 2
ALL
LABEL
LABEL
SUPER VIDEO
OPEN/CLOSE
STANDBY ON
OPEN/CLOSE
STANDBY ON
VCR DVD
VCR DVD
DIRECT DUBBING
DVD VCR
EJECT
EJECT OPEN
OPEN
DIRECT DUBBING
DVD VCR
CHANNEL
SOURCE
RECORD
PAUSE
STOP
REW
PLAY
F.FWD
DVD
CHANNEL
SOURCE
RECORD
PAUSE
STOP
REW
PLAY
F.FWD
DVD
VCR
VCR
1
DVD
TV/VIDEO
VCR OPEN/CLOSE
OR
6
RETURN
DISPLAY
LIST/DISC
SYSTEM
MENU
MENU
OK
2
D.DUBBING
REW
THUMBNAIL CHAPTER
REPEAT
TITLE
SEARCH
MARKER
3 1234
FWD
RECORD
TIMER
REC MODE
AUDIO
ZOOM
CLEAR SHOWVIEW
1 2
3
RECORD
●
5 6
RETURN
DISPLAY
LIST/DISC
SYSTEM
MENU
MENU
OK OK
D.DUBBING
4
Press REC MODE repeatedly to select a desired recording mode. It defines the picture quality and the maximum recording time for a disc. DVD: SP (Standard quality), LP (Low quality), XP (High quality), EP (Extended quality), VCR: SP (Standard play), LP (Long play). Press CHANNEL 3 4 to select the TV programme number you wish to record.
Press RECORD 0 to start recording. If required, you can press RECORD 0 repeatedly to recording time length. During recording, you may press PAUSE/STEP ; to pause the recording and press RECORD 0 to continue. To stop the recording, press STOP 9.
REW
THUMBNAIL CHAPTER
REPEAT
TITLE
SEARCH
MARKER
3
PAUSE/STEP
FWD
RECORD
TIMER
REC MODE
AUDIO
ZOOM
CLEAR SHOWVIEW
PLAY
2
VIDEOPLUS +
Basic recording from a TV
Switch on the DVD Recorder, press VCR or DVD button to select (VCR or DVD) mode for recording. Insert a recordable DVD+R(W) with the label side facing up.
PLAY
STOP
4
➜ If you wish to record from additional device (e.g.Video Cassette Recorder), press 3 4 on the remote control to select the correspond external input channel. For example, select { AV2 } if you have connected the VCR to EURO AV2 DECODER scart socket at the back of the DVD recorder.
4
2
VCR OPEN/CLOSE
DVD
TV/VIDEO
OR
5
PAUSE/STEP
VIDEOPLUS +
4
1
PAUSE/STEP
PLAY
STOP
34 3
5 1 2 3
Start Playback a disc
Press DVD to select DVD mode. Press OPEN/CLOSE / to open the disc tray, then insert a disc with the label side facing up. Press OPEN/CLOSE / again to close the disc tray. Playback will start automatically. ➜ If a disc menu appears, press 1 2 3 4 to navigate within the menu, highlight a title and press OK or PLAY 2 to start playback. NO SOUND! Connect the AUDIO L/R (red/white) sockets at the back of the DVD recorder to the correspond AUDIO input sockets on a TV set, stereo system or receiver. Turn on the connected system and select the appropriate channel.
4
To stop playback, press STOP 9.
Before using the Remote Control, ●
Press DVD on the remote control for DVD functions.
●
Press VCR on the remote control for VCR functions.
To play the DVD+R on other DVD players, you must finalise it first
1 2
Press SYSTEM MENU on the remote control. Press 3 4 to select { Finalise } in the menu and press OK to start finalising the DVD+R. Once the DVD+R is finalised, no further recordings and editings can be made to the disc. Unfinalise a DVD+R is not possible.
Detailed playback features and additional functions are described in the accompanying user manual.
