Philips Led T5 Instantfit Lamp

Transcript

Philips LED T5 InstantFit Lamp The Philips LED T5 InstantFit lamp is a technology breakthrough out of our LEDtube portfolio. This product is compatible with instant start ballasts and is the easiest way to replace fluorescent tubes with LED tubes. The InstantFit lamp is a true plug-and-play LED solution that realizes an energy savings. Product Features Compatibility • Innovative driver design that enables a “plug-and-play” LED solution to replace existing fluorescent lamps • Quick and easy installation User Comfort • CRI 82 • Advanced optical design ensures a uniform light output and superior optical efficiency Reliability • Reliable operation between -20 C and 45 C ambient temperature • Tested to B50 L70 requirement. For systems using a low (0.78) or normal (0.88 or less) ballast factor, InstantFit lamps are rated for 50,000 hours • 50,000 switching cycles O O Energy Savings • Energy savings of up to 50%* • DLC listed Safety • Over voltage and over temperature protection • Complies with UL and CSA safety requirements • Shatterproof polycarbonate (PC) material Environment • No Mercury • Low Carbon Footprint * Based on comparison between 1 x 24W LED InstantFit T5 (1-lamp system power =28W) vs. 1 x 54W T8 TL System (1-lamp system power =60W) Application Retail Industry Offices Hospitals Parking Lots Schools Warehouses Public Areas 3 Spectral Power Distribution 3500K 100% 90% 90% Intensity (mW/nm) in % Intensity (mW/nm) in % 3000K 100% 80% 70% 60% 50% 40% 30% 20% 10% 0% 80% 70% 60% 50% 40% 30% 20% 10% 0% 200 250 300 350 400 450 500 550 600 650 700 750 800 Wavelength (nm) Wavelength (nm) 5000K 100% 90% 90% Intensity (mW/nm) in % Intensity (mW/nm) in % 4000K 100% 80% 70% 60% 50% 40% 30% 20% 10% 0% 200 250 300 350 400 450 500 550 600 650 700 750 800 80% 70% 60% 50% 40% 30% 20% 10% 200 250 300 350 400 450 500 550 600 650 700 750 800 Wavelength (nm) 0% 200 250 300 350 400 450 500 550 600 650 700 750 800 Wavelength (nm) Photometric Diagrams 24T5 LED/48-3000 IF 10/1 1 x 3300 lm 24T5 LED/48-3500 IF 10/1 1 x 3300 lm 4 24T5 LED/48-4000 IF 10/1 1 x 3500 lm 24T5 LED/48-5000 IF 10/1 1 x 3500 lm Lifetime and Lumen Maintenance Lumen Maintenance 100% Philips LED T5 InstantFit Lamp has a lifetime of 50,000 hours. This is defined as the number of hours when 50% of a large group of identical lamps drops below 70% of its initial lumens. 95% 90% 85% 80% 75% 70% 0 10000 20000 30000 40000 50000 Hours Temperature Operating temperature T operating min -20°C max +45°C Storage temperature T case min -40°C max +65°C Maximum surface temperature for rated lifetime of tube at Tamb.=25°C T case +45°C 5 Dimension:mm 100% 99% Lumen (% ) 98% 97% 96% 95% 94% 93% 92% 55 60 65 70 75 80 Tc ( oC) Tc. position Approbation & Certificates The product complies with UL, NSF, RoHS and CSA. D A3 A2 A1 6 Dimensions (mm) Product A1 A2 A3 D 1500mm 1147.8 1154.9 1163.2 17.8 Technical specification EOC/6NC Product Description Bare CCT Lumen Lifetime Base Length Lamp Bulb Type Wattage (W) (K) ( lm ) ( hrs ) ( In. ) 467126 24T5 LED/48-3000 IF 10/1 24 3000 3300 50000 G5 48 T5 467134 24T5 LED/48-3500 IF 10/1 24 3500 3300 50000 G5 48 T5 467142 24T5 LED/48-4000 IF 10/1 24 4000 3500 50000 G5 48 T5 467159 24T5 LED/48-5000 IF 10/1 24 5000 3500 50000 G5 48 T5 * Minimum CRI is 80 Installation Guide The Philips LED T5 InstantFit lamp automatically adjust its light output that corresponds to the ballast factor that it is connected to Installation Guide. OFF 1 2 3 ON 4 5 6 Please refer to www.philips.com/InstantFit for the latest ballast compatibility guide. Application Notes • • • • Suitable for dry & damp locations. Operating fixture ambient is -20 °C and +45 °C. Always switch off power to the luminaire before commencing work. Compatible only with instant-start ballasts. Please refer to www.philips.com/InstantFit for the latest ballast compatibility guide. • Ensure that the lamp holders are free from any debris and/or containments and that the Philips InstantFit T5 LED Lamp pins are firmly seated in their lamp holders. For additional installation tips, please refer to www.philips.com/InstantFit. • Philips LED T5 InstantFit lamps are not compatible with luminaires that use a remote starter. • Philips LED T5 InstantFit lamps are intended to retrofit, UL Listed surface mount, or type IC or non-IC recessed mount fluorescent luminaries with or without diffuser that use straight tubular lamps. 7 OEM Guideline Lumen Maintenance vs. Lifetime 100% 100% 90% 80% 70% 60% 50% 40% 30% 20% 10% 0 Lumen Maintenance Cumulate Failure Rate Failure rate vs. Lifetime @ Ta 25 OC 95% 90% 85% 80% 75% 70% 0 0 10000 20000 30000 40000 50000 60000 10000 20000 50000 Lifetime vs. Tcase Failure Rate vs. Lifetime vs. Tcase 80% TC=45 60000 70% TC=55 50000 60% TC=65 50% 40% 30% Lifetime Total Failure Rate 40000 30000 Hours Hours B10L70 B50L70 40000 30000 20000 20% 10000 10% 0 0 0 10000 20000 30000 40000 50000 60000 Hours 30 40 50 o TC ( C) © 2016 Philips Lighting All rights reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license under patent or other industrial or intellectual property rights. 12/2016 www.philips.com 60