Transcript
V.150621
Wireless Setup on PC and Mac 1. Check the Hardware Installation The Phylink camera can connect to any wireless network through standard 802.11b/g/n Wi-Fi connections. You can set the camera up to work wirelessly with your broadband router using a PC or Mac. Before you begin, ensure the camera is connected to your router with the Ethernet cable first and then powered up. NOTICE Please note that for initial setup, you need to connect the camera directly to your router or switch with a network cable. You cannot connect wirelessly to the camera without first setting it up via a network cable. After successful wireless setup, you can remove the network cable and the camera should work through the wireless network after a short delay.
2. Locate the camera on your local network Download and run the Phylink Camera Live which you can download from www.phylink.com . If your PC or Mac is in the same local network with your camera, the Phylink Camera Live can search the cameras. That means your PC or Mac and your camera need to connect a same router at your home or office. Start the Phylink Camera Live and click on “Setup” from Main Toolbar to enter the advanced setting via a web browser. Press the "Search" button then the program should automatically find your camera if it is correctly connected. Click the required camera from the camera list and it will be highlighted. Click the "Browser" button and then the Camera Homepage will appear.
Camera
Multilive
Video
Album
Setup
Model
Name
Location
IP
Port
1
PLC-336PW
Network Camera
Default Location
192.168.168.39
80
0:e0:4b:c2:8f:64 T5M5TN7U67A...
2
PLC-335PW
Network Camera
Default Location
192.168.168.56
80
0:e0:4b:c2:6e:22 SR6MJ87HJKF...
3
PLC-233PW
Network Camera
Default Location
192.168.168.77
80
0:e0:4b:b9:11:68 EVFG78KHUW...
4
PLC-223PW
Network Camera
Default Location
192.168.168.75
80
0:e0:4b:c6:23:c4 VDF45G8IPK3...
Search
Browser
Clear
MAC
P2P UID
Setup
NOTICE Sometimes the program may take a few minutes to find your camera, so if your camera isn’t displayed, wait a few moments and then click “Search” button to search for cameras again. If you can not search the camera, please check the connections of camera and computer. Please also check the hardware installation of camera.
3. Wireless Setup on PC via Web Browser Step 1 Click "Setting" button on the camera homepage to setup your camera with its various settings.
Bullet Network Security Camera
PLC-335PW
When prompted for authentication use the following information: User Name: admin (default User Name is "admin") Password: admin (default password is "admin") After login the camera via browser, click "setting" button to config the camera. Go to Network > Wireless Setup and then the following screen will appear.
Live View
Wizard
System
Reboot
Support
Camera
Wireless Setup
Network
Wireless:
Disable
Enable
Wireless Setup Search...
Wirelessnc SSID: Infrastructure Mode: (Select infrastruture mode using wireless router.)
Security mode:
TCP/IP Setup DDNS Setup UPNP Setup P2P Setup
Off
Storage Apply
Test
Task Tools
Step 2 Do NOT type anything in the SSID field. Instead, click the "Search..." button so that the camera can search for available Wi-Fi networks. Mode
Channel
Auth
Encrypt
wirelessnc
Infrastructure
9
OPEN
NONE
SSID
TP-LINK_4B8C68
Infrastructure
1
WPA2PSK
AES
FAST_3AC1FE
Infrastructure
13
WPA2PSK
AES
Tenda_0B0458
Infrastructure
13
WPA2PSK
AES
OK
Signal
Cancel
Select your Wi-Fi network from this list then click "OK", and check if your network name has now been filled into the SSID field.
Step 3 Do NOT manually change any of the settings (SSID, Mode, security mode, Encryption type) Now simply enter the WEP or WPA Key (whichever is appropriate for your router) into the respective fields. Click on “Apply”, you'll get a message about “Wireless setup accepted successfully”. Live View
Wizard
System
Support
Reboot
Camera
Wireless Setup Wireless:
Network Enable
Disable
TP-LINK_4B8C68 SSID: Infrastructure Mode: (Select infrastruture mode using wireless router.)
Security mode: Encryption type:
Wireless Setup Search...
TCP/IP Setup DDNS Setup UPNP Setup P2P Setup
WPA2PSK
Storage
AES
Task
WPA Key: Re-type WPA Key:
Tools Apply
Test
NOTICE Please remember that both WPA and WPA2 keys are case sensitive and need to be between 8 and 63 characters. Most likely your wireless network was set up with a password. If you don't remember it, you can check you router's wireless setup menu or ask the person who set up your wireless network. Without the password you can not proceed with your camera's wireless setup. So you can either continue to use your camera in wired mode or set up a new wireless key/password on your router.
Step 4 Now you should use the “Test” feature to check if you typed it correctly. If the test reports “Success!” you can remove the network cable and it should work wireless after a short delay. If the test reports “no wireless connection”, please double check your WPA key. Congratulations! At this point you should be able to use your camera wired or wireless on your local network using the same local IP address.
4. Adhoc Wireless Setup Options If you want to make a direct wireless connection from your camera to your computer, you will need to setup the camera in "Adhoc" mode. In order to view the camera directly from your computer you first need to configure the wireless device in your computer. Once "Adhoc" has been selected, select a "Security Mode" and type in a connection key, and click "Apply".
5. WPS Setup Additionally the Phylink camera can be setup through a WPS connection, if your router supports this function. To know how to use WPS Setup function, please refer to “Wireless Installation with WPS function” section in the user manual. NOTICE The Push Button option for WPS should be enabled on the router for this function to work. Please refer to your router’s manual.
Find additional support and information For more information or support, visit http://www.phylink.com or contact
[email protected]
Scan QR Code to get support
Phylink and the Phylink logo are trademarks or registered trademarks of Phylink Solutions LLC. One Commerce Center-1201 Orange St. #600 WilmingtonDelaware19899 United States Phylink Network Camera Technical Articles
| Copyright
2014 Phylink Solutions LLC. All Rights Reserved.
