Transcript
PICKUP CHARGER The PICKUP charger is the perfect solution for storing, charging and updating content on up to 25 PICKUP audio guides. Store The charger has slots for 25 audio guides and its small footprint ensures best use of counter space. Charge The PICKUP units start charging as soon as they are inserted into the charger. Content The audio tour is stored in the charger letting you update the content of up to 25 audio guides at a time. Every time you put a PICKUP into the charger, its content is checked and updated. The red light on top of the PICKUP indicates the current status of the units in the charger. Fast flash: Copying in progress. Do not remove PICKUP. Pulse: Charging in progress. OK to remove PICKUP. Steady light: Fully charged. OK to remove PICKUP.
PICKUP CHARGER Art No 3548
Weight: 1500 gr Size: 165 x 165 x 55 mm
-
Copy to charger Press the copy switch (with a pen or pencil) for a couple of seconds to enable copying from the USB stick or master PICKUP.
Prepare audio tour Download your audio tour files to a master PICKUP audio guide(seePICKUPPRODUCERMANUAL) or a USB memory stick.
The USB port light flashes as the audio tour is transferred to the charger. Do not remove the master PICKUP or USB stick at this point. When the flashing stops, disconnect the master PICKUP.
Connect the master PICKUP to the charger’s USB port with the USB cable, or plug in the USB stick. The light on the USB port turns on.
Ethernet port.
Update audio guides The new tour is automaticallycopiedtoanyPICKUPunitsin the charger. A flashing light on the PICKUP
Copy switch. Set to enable file transfer.
unitsindicatescopyinginprogress.Apulse or steady light means copying is complete. The audio tour is stored in the charger until you write over it with a new tour, even if you disconnect the power. Every time you put an audio guide in the charger, its content is automatically checked and synchronized to match the tour in the charger. Important To avoid overheating, make sure that the charger is kept and used in a well-ventilated area, providing forced air circulation if necessary.
USB port. Plug in the master PICKUP Power. Use DATATON DC ADAPTER here, with the PICKUP USB CABLE. only. A red light indicates power on.
PICKUP CHARGER Art No 3548
Copyright 2011 Dataton AB. Specifications subject to change. Rev: 1.2
e
Power up Plug the DC adapter into the wall socket and connect it to the charger. The charger takes around 30 seconds to power up.
