Transcript
PL2140 - 6/12 VOLT, 4.0 AMP BATTERY CHARGER/MAINTAINER AUTOMATIC OPERATION
SEALED CASE
Just connect the unit, choose your battery voltage and type, and the maintainer does the rest!
Keeps dust and debris out of the maintainer for durability and long life.
SMART CLAMP TECHNOLOGY
Provides reverse polarity protection, eliminates sparking and protects against many forms of operator error.
The SOLAR PRO-LOGIX PL2140 automatic battery charger / maintainer utilizes an advanced multi-phase charging process to deliver an optimal charge to each battery serviced, regardless of battery size or type. No guesswork or mystery... if it is a leadacid battery installed in a vehicle, it can be charged and charged right with PRO-LOGIX. Two tools in one, the PL2140 functions as an advanced automatic battery charger to immediately bring depleted batteries to full charge, plus it functions as an advanced automatic battery maintainer, conditioning and maintaining batteries in long term storage.
V
MULTI-PHASE CHARGING PROCESS
14 CONSTANT CURRENT
12
VOLTAGE
CURRENT
4.0
CONSTANT VOLTAGE
3.5
10
3.0
8
2.5
6
2.0
4
1.5
2
1.0
0
0.0 -1.0
STATUS INDICATORS
PHASE 1
PHASE 2
PHASE 3
PHASE 4
PHASE 5
ENERGIZING
FAST CHARGE
ABSORPTION
COMPLETION
RESTING
CHARGING
ON
ON
ON
FLASHING
COMPLETE
OFF
OFF
OFF
ON
OFF SLOWLY FLASHING
PHASE 6
PHASE 7
EXERCISING
RESTORING
ALTERNATING FLASHING
SEE PHASE 2-4 FOR INDICATION
BENEFICIAL CHARGING / SUPERIOR LONG TERM CHARGING The multi-phase PRO-LOGIX charging process ensures optimal energy delivery to each battery charged. Its maintenance mode routine is less stressful than alternative approaches, ensuring that batteries on extended seasonal charge are kept fresh and ready for service. The PRO-LOGIX routine even exercises the battery to properly prepare it for the maintenance charge.
UL-approved
© Clore Automotive 2013 © 2014 Clore Automotive
Clore Automotive | 800.328.2921 | www.solaronline.com
ETL-approved
PL2140 - 6/12 VOLT, 4.0 AMP BATTERY CHARGER/MAINTAINER
Recovery Mode
Versatile Charging
The PL2140 can be pro-
With a convenient quick attach
grammed to recover auto-
matically from power outages, eliminating the need to reset
cord on the output side, the
maintainer interfaces with several
accessories equipped with a quick
the charger. It can also oper-
attach connector, including battery
ate in Standard Mode, which
clamps, ring terminals and 12V
would require resetting the
charger after a power interruption. This puts you in control –
male adapter.
allowing you to configure the charger exactly as you prefer.
Charges Mulitple Battery Types
Battery Repair Mode
Compatible with a wide variety of battery types, including
The PL2140 features Battery Repair and Soft Start modes, which
and Marine batteries. If it is a 6 or 12 Volt lead acid
sulfated or deeply discharged batteries. When attempting to
Conventional, AGM, Gel Cell, Spiral Wound, Deep Cycle battery installed in a vehicle, boat or implement, the
PL2140 can charge and maintain it properly to ensure that it is ready when you need it next.
automatically commence when needed, to effectively manage
charge a severely discharged battery, where the battery’s charge is too low for the charger to activate, the operator can force the charger to start charging, avoiding the “dead battery dilemma.”
ATTER
B © Clore Automotive 2013 © 2014 Clore Automotive
Y
BR
RE
P A IR
Clore Automotive | 800.328.2921 | www.solaronline.com
L00514