Preview only show first 10 pages with watermark. For full document please download

Plaster Flat Grande.indd

   EMBED


Share

Transcript

PLASTER FLAT GRANDE ® High output slim contemporary paintable up/downlight v.1.2 LIGHTING DATA Lamp Lumens 2 x 1190 lm Lamp Efficacy 2 x 91.5 lm/W Colour Temperature 3000K CIE CRI available as ≥80 Beam Width Extra Wide Lifetime L70/B10 ≤50,000 hrs LED Manufacturer Vossloh-Schwabe A+ ELECTRICAL INFORMATION NORMAL MAX Voltage 220V AC 240V AC Wattage 2 x 13W 2 x 13W Lamp Type LED Product Class II CONNECTIONS AND MECHANICAL Push-in terminals with push-button Weight IP Rating 0.20mm2 - 0.75mm2 2740 g IP20 Technical data figures are for guidance only and are subject to ±5% tolerance PRODUCT CODES WLFG3K301 365 Plaster 75 250 Dimensions in mm. Not to scale 150° 180° 150° 120° 120° 90° 90° 60° 60° Indoors C0 / C180 30° 0° cd / 1000 lm 30° C90 / C270 Polar diagram. UK SHOWROOM AND DESIGN STUDIO 561-563 Kings Road London, SW6 2EB, UK T: +44 (0) 20 7371 9000 E: [email protected] W: www.johncullenlighting.com CUSTOMER SERVICE AND DISTRIBUTION Unit 24, Talina Centre, Bagley ’s Lane, London, SW6 2BW, UK T: +44 (0) 20 7371 9000 E: [email protected] W: www.johncullenlighting.com DUBAI SHOWROOM AND DESIGN STUDIO 2905, JBC2, Cluster V, Jumeirah Lakes Towers PO Box 643550 Dubai, United Arab Emirates T: +971 (0) 56 423 3062 E: [email protected] W: www.johncullenlighting.ae Copyright © John Cullen Lighting 2017. John Cullen Lighting reserve the right to change the design and specification of our product range without prior notice. E&OE For additional product resources and the latest issue of this specification sheet please visit www.johncullenlighting.com Energy Efficiency Class PLASTER WALL LIGHT INSTALLATION GUIDE ® Turn off Feed cable v.1.1 WARNING FEED CABLE TO FITTING LOCATIONS TURN OFF MAINS POWER SUPPLY BEFORE STARTING INSTALLATION TURN OFF MAINS SUPPLY BEFORE STARTING INSTALLATION DRIVER MUST NOT BE USED CORRECT POLARITY MUST BE OBSERVED BLACK CABLE (-)NEGATIVE RED CABLE (+)POSITIVE CABLES MUST ONLY BE REPLACED BY MANUFACTURER Position Pre-position DRILL THE HOLES AND INSERT THE PLASTIC ANCHORS. Test POSITION THE TRAY AND CONNECT. THIS PRODUCT CAN BE CONNECTED DIRECTLY TO MAINS Complete TURN BACK ON MAINS SUPPLY POWER FITTINGS ON AND TEST TO SEE IF LIGHT FITTING WORKS CORRECTLY LOCATE FITTING IN PLACE NOTES PLEASE NOTE:-These notes are for guidance only. John Cullen accepts no responsibility for any installation using the above and the final decision on installation remains with the installer. All electrical works to be carried out by a qualified electrician. UK SHOWROOM AND DESIGN STUDIO 561-563 Kings Road London, SW6 2EB, UK T: +44 (0) 20 7371 9000 E: [email protected] W: www.johncullenlighting.com CUSTOMER SERVICE AND DISTRIBUTION Unit 24, Talina Centre, Bagley ’s Lane, London, SW6 2BW, UK T: +44 (0) 20 7371 9000 E: [email protected] W: www.johncullenlighting.com DUBAI SHOWROOM AND DESIGN STUDIO 2905, JBC2, Cluster V, Jumeirah Lakes Towers PO Box 643550 Dubai, United Arab Emirates T: +971 (0) 56 423 3062 E: [email protected] W: www.johncullenlighting.ae Copyright © John Cullen Lighting 2017. John Cullen Lighting reserve the right to change the design and specification of our product range without prior notice. E&OE For additional product resources and the latest issue of this specification sheet please visit www.johncullenlighting.com ALL ELECTRICAL WORKS TO BE CARRIED OUT BY A QUALIFIED ELECTRICIAN