Preview only show first 10 pages with watermark. For full document please download

Playback Mode

   EMBED


Share

Transcript

PLAYBACK MODE SEARCH AND PLAY • To access the search playback list go to Menu and select Search and Play • The Search and Play list will come up and list off all of the recordings you have starting with the oldest footage at the top of the list and newest footage at the bottom of the list 1. The directory shows dates and the number of video files recorded on that date. Press the and    buttons to move the cursor up or down. 2. Page number shows the current and total pages that contain recorded footage. 3. Each color distinguishes the modes in which the files were recorded. Blue: Manual Record  Red: Motion Detection Record  White: Schedule Record 4. This bar indicates the mode that the DVR recorded with (if any). Press the rewind button or fast forward button  to move the green cursor left or right along the event bar to select footage, then press the menu button to start playback of the selected footage. 5. Displays the starting time of the recorded footage that is highlighted on the event bar. To Play Searched Footage: 1. Highlight the desired playback starting time. 2. Press the menu button . 3. Use the rewind and fast forward  buttons to scroll to PLAY. 4. Press  again to start playback. To Stop Playback of Searched Footage: 1. Press the record and stop button to stop playback and the system will return to the Search and Play list. To Exit Search and Play List: 1. To return to the main menu, press the menu button . 2. Use the rewind and fast forward  buttons to scroll to EXIT. 3. Press the menu button again, this will bring you back to the main menu. 4. To exit to the main menu, press the menu button again. PI1000 10 SYSTEM SETUP MAIN MENU 1. Item Selection (menu/submenu) Title. 2. Menu Layer Indication. The device consists of three menu layers: First Menu Layer (Main Menu) Second Menu Layer Third Menu Layer 3. MENU Content: Basic Menu Operations. • Press the Record (up) or down or Play (down) buttons to move the highlight bar and cursor ( ) up • When the menu option you want is highlighted press the fast forward (+) button • When in a menu screen with adjustable settings, press the fast forward (+) buttons to increase or decrease the setting values that have been highlighted • To exit the menu/submenu you are in press the menu button (until you completely exit into live view) PI1000 to select the item or rewind (-) you will exit back one menu screen 11 SYSTEM SETUP DATE/TIME SETUP 1. Date Format: • Y / M / D • M / D / Y • D / M / Y 2. Date/ Time Adjustment: Clock is 24 hr (example 16:00 would be 4:00 pm) and year settings are from 2000 to 2099. To adjust Date/Time and Play button to scroll • Use the Record to what setting you want to change and rewind (-) • Press the fast forward (+) buttons to increase/decrease the value MOTION DETECTION SETUP Motion detection allows you to set your DVR to prompt recording ONLY when motion is detected. This is good if you would like to save space on your SD card and use high quality settings when its important to do so. 1. Sensitivity Bar: The black bar indicates the amount of motion being detected (MD energy) and the red line indicates the set MD threshold. 2. MD Energy: The amount of movement generated by the moving object. 3. MD Threshold: Press the + and - buttons to change motion detection threshold value. Motion Detection Sensitivity Setup Changing the threshold value setup will affect the recording sensitivity of the motion detection recording. • When set to Motion Detection, any motion (MD energy) that is less than the preset MD Threshold will not trigger motion detect recording. Any MD Energy that is greater than the MD Threshold will trigger motion detect recording For example: You are recording in a room with an open window and the movement of your curtains always yields a similar amount of MD energy. You can set the MD Threshold to only record when the movement is greater than that of the curtains. • Motion threshold allows you to test how much MD energy is generated by aiming the PI1000 at a steadily moving object. The MD Energy bar will fluctuate based on the movement of the object. If the Energy Bar moves past the MD Threshold (red line), then you should move the MD Threshold to a higher value to avoid false triggers PI1000 12 SYSTEM SETUP MANUAL AND SCHEDULE RECORD SETUP Manual Record This option allows you to adjust the video size (resolution), frame rate and image quality of manual recording footage. is pressed to start recording. Manual record is when the record button • The choices you have to adjust are the following: Video Size/Frame Rate: Resolution:                    320x240           640x480 Frame Rate (Max.):    30 fps               12 fps Image Quality: High Quality (HQ): High image quality but uses more memory storage Medium Quality (MQ): Default quality Low Quality (LQ): Low image quality but uses less memory storage • To adjust these settings use the Record change, then press the fast forward (+) and Play buttons to scroll to what setting you want to and rewind (-) buttons to increase/decrease the number • The Frame rate changes based on the resolution you are using and different symbols appear on screen based on which quality you are using Schedule Record ( Motion Detection/ Continuous) This option allows you to adjust particular times you would like to record video, as well as what kind of video you would like to record at those particular times (continuous or motion detection). The DVR will only record within the setup time range. • To adjust the settings use the Record and Play like at a particular time then press fast forward (+) would like the video to record PI1000 buttons to scroll to what type of recording you would to enter into the time slot menu to adjust the time you 13 SYSTEM SETUP Motion Record This option allows you to enable or disable motion record as well as adjust the times and video settings in which you would like your DVR to record based on motion detection. RECORD:     Enable or disable motion schedule recording by selecting ON or OFF with the fast forward (+) and rewind (-) buttons. SCHEDULE:    This function is based off a 24 hour recording clock. For example, setting the clock to 08:00-12:00 will record between 8 AM and 12 PM. To adjust the times you want the DVR to be on motion record use the Record and Play buttons to scroll through hours and minutes, then press the fast forward (+) and rewind (-) buttons to change the times you want recorded. DURATION:       This option allows you adjust the duration which the DVR will record for after motion has been detected. You can choose between 5SEC , 10SEC 15SEC, 20SEC and 30SEC use the fast forward (+) and rewind (-) buttons to scroll through the seconds. • You can also adjust the video size (resolution), frame rate and image quality of motion detection recording. The instructions to change these settings are the same as the instructions for manual record Continuous mode This option allows you to enable or disable continuous record as well as adjust the times and video settings in which you would like your DVR to continuously record. • • PI1000 The instructions on enabling, disabling and setting the schedule for continuous record are the same as the instructions for motion record The instructions for adjusting the video size, frame rate and image quality are the same as the instructions for manual record 14 SYSTEM SETUP SD CARD OPTIONS The SD card is the included memory card that gets inserted into the top of your DVR. This option shows you how much total space is on the SD card, how much space is currently available as well as allows you to format the SD card. Formatting the SD card will erase all footage on the DVR. 1. Total space available on the SD Card. 2. Remaining space left on SD Card. 3. Format option. To Format SD card: a. Make sure "FORMAT" is highlighted. b. Use the fast forward (+) to enter into a warning screen c. The warning screen will read "WARNING! DATA ON SD CARD WILL BE CLEARED?" d. To continue on and format the SD card press the fast forward (+) button. e. To exit without formatting the SD card press the menu button and you will return back to the SD main menu. Note: Recording time depends on the SD card capacity, recording modes, and degree of video variation. SYSTEM STATUS This option displays your current DVR settings for each record mode. 1. Displays the system version. 2. Displays the resolution, FPS and video quality of manual record. 3. Displays the status, record times, resolution, FPS and video quality of motion detection record. 4. Displays the status, record times, resolution, FPS and video quality of continuous record. The photo shows: • • • • Version 1.06 Manual record is set to 320x240 resolution at 30 frames per second and medium quality Motion record is ON and records from 11:00am till 3:00pm with a resolution of 640x480, 12 frames per second and medium quality Continuous Record is set to on and records from 1:00pm till 3:00pm with a resolution of 320x240, 30 frames per second and medium quality Press any button to return to the Main Menu. PI1000 15 SYSTEM SETUP FACTORY DEFAULT This option allows you to restore the settings set on your DVR back to the factory default settings. Once you enter this option the words "RECALL DEFAULT NOW?" appear on screen: • Pressing the fast forward (+) button will restore the DVR back to the factory/ default settings • Pressing the menu button will exit the screen and return you to the Main Menu Note: Returning to factory defaults will erase all your settings (except Date and Time setup). DVR SPECIFICATIONS Functionality Simplex Video Compression MPEG-4 Resolution 640 x 480, 320 x 240 Recording Frame Rate 320x240: 1~30FPS, 640 x 480: 1~12FPS Recording Resolution VGA (640x480)/ QVGA (320x240) Recording Qualities High, Medium, Low Recording Modes Manual/ Schedule/ Motion Detection Recording Media SD1.1/1.0 SD/SDHC Card, Max 32GB Video Format NTSC/PAL Video Display Output 1 CH RCA Composite Live Viewing Single Screen Live Resolution 640 x 480 Live Frame Rate 30 FPS Play Search Mode By Date, Time Play Speed Forward/Rewind: x1/x2/x4/x8/x16/x32 Play Mode Single Screen OSD and System Menu Display Yes PI1000 16 SPECIFICATIONS OSD Language Display English Time and Date Stamp Display Yes Disk Full Warning Full Stop / Overwrite (Selectable) Automatic Overwrite Option Yes LED Indicators Power, Record, Play, Menu Housing Material ABS Plastic Housing Color Pure White Battery Operable Yes, 4 x AA Battery Life 12 hours (lithium batteries) Power Input DC 12V 180mA Power Adapter Input AC 110-240V (switching mode) Operating Temperature 41°F ~ 113°F Operating Humidity 80% Dimensions 5" x 3" x 2.75" Weight 0.4lbs CAMERA SPECIFICATIONS Image Sensor 1/6" Color CMOS Sensor Resolution 640 x 480 Outdoor Use No Focal Length Board Lens f3.62mm / F2.8 Focus Type Fixed Min. Illumination 2 lux Motion Detection Yes Viewing Angle 66 Degrees BLC Auto AGC Auto White Balance Auto Signal/Noise Ratio 46 dB PI1000 17 NOTES PI1000 18 NOTES PI1000 19 SVAT ELECTRONICS now you can see WWW.SVAT.COM DISCLAIMER SVAT does not endorse the use of any SVAT products for any illegal activities. SVAT is not responsible or liable in any way shape or form for any damage, vandalism, theft or any other action that may occur while a SVAT product is in use by the purchaser. MODEL# PI1000 WWW.SVAT.COM